WDA and SAP-GUI-Integration

Hello,
I am testing the integration of an WDA in the SAP-GUI via cl_gui_wdr_viewer and events. it works fine but now i have new challange where i have some problems.
I the new case, the WDA should run on another Server. I call the WDA with the cl_gui_wdr_viewer->show_url( ), thats works fine but in this case there is no cl_wdr_sapgui_integration-instance in the WD available ?!?
Does anybody know the condition for the availability of this instance ?!?
Thx
Thomas

Some seperate Installation requirements are need to Install SAP GUI.........
Windows:
CPU: Pentium III or equivalent 300 MHz or higher
Memory: 128 MB or higher
Monitor: 17" recommended
Resolution: 1024x768 / 32,000 colors
MACintosh:
CPU: G3 or higher
Memory: 128 MB or higher
Monitor: 17" recommended
Resolution: 1024x768
Kanagaraja L

Similar Messages

SSO E-Sourcing and SAP GUI for HTML

Hi,
We are trying to provide integration between SAP E-Sourcing and SAP ECC via the SAP GUI for HTML. From an E-Sourcing project, we should define a link which will link us to the report via SAP GUI for HTML. Some parameters are automatically transferred via the URL so that the report will be prefiltered.
The problem arises that we cannot create a SSO mechanism between SAP E-Sourcing and SAP GUI for HTML. The only documentation we can find is how to setup this SSO between the Portal and ESO (only included going from the EP to ESO). We need to find a way to do the opposite, i.e. SSO from ESO to SAP / EP.
Thnx,
Bram

Dear Chong,
I have came across the following information about SAP GUI For HTML
With the version 7.02 / 7.20 of the NW Application Server
the SAP GUI for HTML has been completely
reworked.
1.The rendering is now based on Unified
Rendering which is also used by many other
SAP UI technologies.
2.Similar Look & Feel as other UI technologies
3.Better Portal integration
4.Full Theme support
5.Unified client requirements
But have not came across any note which converts the SAP GUI for HTML to SAP GUI for Windows in appearacne. I think the point 2 mentioned about says that in this version the SAP GUI for HTML will have appearnce like the other UI.
Pls refer the [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d06db80d-ebf4-2a10-6b99-faa652c69d5c?QuickLink=index&overridelayout=true]
Hope it helps.
Regards,
Samir

Difference between using the Enterprise Portal and SAP GUI

Hi Gurus,
Could one of you please send me a document that lists the differences between the Enterprise Portal and SAP GUI?
thanks in advance

Hi,
For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx).
On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
So the difference between them should be only the way they do the same thing.
For more details, please refer to the below article:
http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Business Objects and SAP BI Integrated Planning material

hi
guys
i am looking for Business Objects and SAP BI Integrated Planning any material site plz send me
regards
suresh

Hi ,
Please find these blogs by Ingo. This should help you.
BusinessObjects and SAP - Installation and Configuration Part 1 of 4
Install Part #1
BusinessObjects and SAP - Installation and Configuration Part 2 of 4
Install Part #2
BusinessObjects and SAP - Installation and Configuration Part 3 of 4
Install Part #3
BusinessObjects and SAP - Installation and Configuration Part 4 of 4
Install Part #4
BusinessObjects and SAP - Configure SAP Authentication
SAP Authentication
BusinessObjects Integration with SAP NetWeaver BI - Technical Material
Thanks,
Gopi

PROXY_NOT_ALLOWED_ON_IS ( SAP ISR and SAP AII Integration problem )

Hi,
I have facing this problem, during SAP IS retail and SAP AII integration ...
SAP AII and SAP PI in same physical server but different client ..
scenario Detail --
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b3084b-0953-2a10-2993-c0a5fe81d591
server detail ..
I am using standard content for integration .. (
SAP IS retail (client 200. server XYX)
SAP AII ( Client 100 server xxx)
SAP PI (Client 001 server xxx)
Error Detail -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PROXY_NOT_ALLOWED_ON_IS</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Proxy calls are not permitted on sender or receiver side on the IS (client)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help ....................
Regards,
Amit
Edited by: Amit Shivhare on Apr 7, 2009 11:53 AM

Hi all,
That problem is solved . but new problem come ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1>Request Message</SAP:P1>
<SAP:P2>CX_ST_DESERIALIZATION_ERROR</SAP:P2>
<SAP:P3>/1SAI/TXSC93730E87CC1B9E866B5</SAP:P3>
<SAP:P4>XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXSC93730E87CC1B9E866B5 XML Bytepos.: 254 XML Path: ns0:BusinessDocumentExecutionRequest(1)BusinessDocument(2)TypeCode(2) Error Text: Data loss occurred when converting Test Kernel ErrorId: CONVT_DATA_LOSS)) An error occurred when deserializing in the simple transformation program /1SAI/TXSC93730E87CC1B9E866B5 Data loss occurred when converting Test</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards,
Amit

NWBC Side Panel and SAP GUI Scripting

Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Some of our users are getting pop up messages that say "The scripting support is not installed"... interestingly they don't actually appear to be opening a side panel when they get this message.
I noticed that these users don't actually have SAP GUI scripting installed at all, so not that it is just not enabled, it is not installed in these cases. So does the above section from the help documentation mean that SAP GUI scripting must be installed on the client PC but it does not actually have to be enabled?
That's how I am currently reading it... but perhaps someone can clarify for me, or someone else has had a similar experience.
Thanks,
Simon

Hi Simon,
As written in the documentation you quoted:
Simon Kemp wrote:
Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Meaning: SAP GUI Scripting need to be installed on the client PC, although it is not required to activate it:
Regards,
Claudia

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Business Objects and SAP BI Integrated Planning

Hi,
Not too sure if this is in the correct forum...but I have question.
Is there a way to use the integrated planning functionality with a Business Objects Front end tool? As I understand BEx will at some stage will not be supported...so I guess there must be a tool. If so which one?
Thanks,
Leo

Hi Leo,
The Business Objects << SAP Solutions Integration Kit >> enables Web Intelligence, Yoyager, and Crystal reporting on the following SAP sources:
1. SAP BW (Infoset, BW Query, BW MDX and ODS)
2. SAP R3 / mySAP ERP (transparent tables, pool tables, cluster tables, views, ABAP functions and ABAP data clusters)
& Also web portal integration to:
3. SAP Enterprise Portal (SAP's Knowledge Management - Repository Framework Interface, iViews etc)
So.. if you can consolidate your planning data into a cube datatarget, you might be in with a chance!
I hope this helps.
Regards,
Henry

SAP IDM and SAP Ariba Integration

is there any connector available for the integration from sap ariba? or has anyone any experience with the sap ariba integration?!
we want create,change and archive the ariba user with sap idm 7.2.

hi fedya,
the case is very simple - we must create / change and deactivte Enterprise users on the ariba Portal!
I attached the ariba screenshot:
bg thomas

Right PAAS/Middleware for SAP HCM and SAP Cloud Integration ?

In 2013, SAP has lot of Focus on SAP Cloud and SAP HCM on premises integration elements following the hybrid model, I will like to know the direction from SAP on integration Middleware/PAAS which will reap great returns in terms of TCO to customers over next 4-5 years basis the SAP Integration Road map esp the exposing standard connectors ?
Please do keep in mind the the Middleware/PAAS should be able to support easy integration with Third Party Vendors like ADP/Hewitt etc

The SFAPI and OData API are exposed for any web service integration, including Dell Boomi AtomSphere. The OData API can handle delta changes.
HCI is an evolving platform and offers similar functionality to Boomi in terms of building integrations with a drag-and-drop interface, etc. There is a SuccessFactors connector provided for HCI and the Talent Hybrid integration content is available on HCI as well as PI. The Employee Central integration content currently available on Boomi should be available on HCI hopefully by the end of the year. The Talent Hybrid high-level roadmap can be found here:
SAP HCM and SuccessFactors Integration Packages: an overview
Boomi is included in the Employee Central subscription, but is very expensive to license for other use cases (i.e. Talent Hybrid scenarios). HCI costs 7.5% of the SuccessFactors subscription. PI is free. HCI may be included in the Employee Central subscription at a later date, but this is not definitely going to happen.

ECATT and SAP GUI

Hi Friends
I am new to this forum and would request to help me solving the following problem
Requirement is as follows.
Development of screen mapping utility - which would likely use the eCATT/SAPGUI library.
Depending on how the eCATT/SAPGUI interface works, probably some infrastructure code to connect, etc.
How should i go about this.
Regards
sunder

Hello Sunder,
I think that you should post this question in the SAP GUI.
Regards
Gregor

Paralell sesions ITS moble and SAP GUI

Hi All,
Is it possible to restrict ITS mobile users to access the backend only via ITS?
Right now they can use ITS mobile screens and at the same time logon to the system via SAP GUI.
Could you please advise is it possible to block SAP GUI?
Best regards,
Adam

Hi Adam,
You can try to change the user type to Communication. With this user type, the user cannot logon to system via sapgui but can via http.
Best regards,
Yuki

Bex Patch level for Windows 7 and SAP GUI 710

Hi,
We have the machine with following config:
O.S - Windows 7
SAP GUI - 710
MS Office 2007
When a user logs into Bex Analayzer, clicks on Add-ins he gets an error message in German.
Same kind of problem was encountered with Office 2003, but MS fix 907417 solved the problem.
But i am not able to find any such fix for Office 2007.
Can anyone tell me what should be the patch level of Bex in this case?

Hi,
What is the exact error message you are getting?
Thanks
Riyez

Difference, advantage and disadvanatges betweeh PCUI and SAP GUI

Hi Scholras,
Can any one tell the advatnages , disadvantages or difeerence between the interfaces GUI and PCUI.
Regards,
sasi

Hi Ramarao,
mySAP CRM offers two user interfaces for running the business scenarios: People-centric UI (PC-UI) and SAPGUI.
For Interaction Center-based scenarios there is a choice between a WebClient and a WinClient version in addition.
SAP Best Practices for CRM supports both UI versions.
In comparison with the SAPGUI the PC-UI provides a more easy and flexible adaptation and personalization as well as a state of the art technology and look-and feel.
But in some project situations these advantages may not justify the higher installation and maintenance effort. In this case the PC-UI can still be chosen.
Nevertheless a move to the PC-UI is of course possible also in a later project phase because for most of the scenarios the UI has only a very limited dependency on the customizing.
Only the choice between WebClient and WinClient is fundamental because the customizing is different and an automated migration from WinClient to WebClient or vice versa is not supported.
<b>Reward points if it helps.</b>
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left.

SAP BOE and SAP BI Integration

Hi,
i want to know how the integration between sap and BOE will happen,if a client buy SAP BI would he get the SAP BOE along with...
please tell me your experience .i have gone through many Documents and not i am confuesd....
regards,
Sanjeev

BO is still eveolving in Netweaver arena. SAP is coming with some new BO products like Xelcius. The BO will be entirely the fron end tool for reporting which can be integrated to BI.
Check out more:
http://searchsap.techtarget.com/news/column/0,294698,sid21_gci1323799,00.html
Thanks...
Shambhu

WDA and SAP-GUI-Integration

Similar Messages

Maybe you are looking for