WDA IVIEW on Portal gives 'Page Not Found'

hi,
I have a issue with WDA IView. Works fine stand alone. Works fine on the DEV Portal.
When put on the TEST Portal, 50% of times it works and remaining it gives 'Page not Found'  error.
Does it have anything to do with WD or Portal ?
We have a Apache Proxy server for the Portal
BSP Iviews on the same Portal works fine.
Can someone help.
Thanks

Hi Volker,
Thanks. As far as I know, the TEST is only single server landscape. The APACHE Proxy handles the User Requests and sends the URL to the application server. The PROXY Resides on Same Box as the Test portal.
It works sometimes and dosen't at other times ......
Is the proxy filtering the URL /sap/bc/WebDynpro......
DOn't know what
I deactivated the Short HTTP Error link. I get following dump :-
Not Found
The requested URL /sap/bc/webdynpro/sap/zlckpt_wd_main/;sap-ext-sid=CSWMxYUGSK93xnmBvg==nZOOiTAbzmcJ/+PXpofIog== was not found on this server.
Apache/2.0.52 (Unix) DAV/2 mod_ssl/2.0.52 OpenSSL/0.9.7d Server at usorlu88.xxxxx.com Port 443

Similar Messages

  • WD ABAP IView intermitently gives 'Page not Found'

    hi,
    I have a issue with WDA IView. Works fine stand alone. Works fine on the DEV Portal.
    When put on the TEST Portal, 50% of times it works and remaining it gives 'Page not Found' error.
    Does it have anything to do with WD or Portal ?
    We have a Apache Proxy server for the Portal
    BSP Iviews on the same Portal works fine.
    Can someone help.
    Thanks

    Hi There,
    Were you able to resolve this problem? If yes, can you please tell me how? We are having a similar issue.
    Thx
    Preet

  • PLM search (wda_sea_qs) gives page not found when started from portal

    In NWBC the PLM search works fine. For result it starts the result webdynpro.
    We use PLM from the portal so I have created an iview for the webdynopro wda_sea_qs.
    When I click on advanced search or search for something the navigation to the other webdynpro's is not working.
    All we get is an new portal page with the message "page not found"
    How can I configure the search to work correct from the portal?
    Greetings
    Rob

    I found the answer via this link:
    http://help.sap.com/erp2005_ehp_04/helpdata/en/1c/ffdf5fd56444748bb6af29d796d75a/frameset.htm
    The iView should contain the following Application Parameter:
                               FRW_SYSAlias=<System>
    This solved the problem.

  • Portal error -- page not found or not available when changed the datasource

    experts ...
    I am facing issue while changing the UME to LDAP.....
    With Java_ABAP_LDAP.xml the EP is running fine ..but when I am changing this config file to ...LDAP ..
    i.e. dataSourceConfiguration_iplanet_deep_readonly_db.xml I am getting the error ....when I logged with administrator user
    as page not found or not available.....
    I checked oss notes 939412 and 1140519 but no help..............
    Kindly suggest ASAP ..
    Thanks !!

    Hi Yogesh,
    While changing the xml to ldap, you need to change ldap server details also in the ldap server tab under ume configuration. And, also do the connection test using test connection button in the configuration screen.
    Regards,
    Sen

  • Portal export - page not found on view log shell script download

    We are currently developing with Portal Version: 9.0.2.2.14A on a Solaris box and I am having difficulty exporting to my production servers. I am following the directions in the Metalink document titled "Exporting/Importing in Oracle Portal 9.0.X" (Doc ID: Note:216572.1). I am logged in as portal and have abided by all prerequisites and have the latest export/import patch installed.
    Here are the steps I follow:
    - I go to the navigator and click 'export' on a page group
    - Select 'Create New Transport Set'
    - Enter a 'Display Name' and click the 'Export Now' button
    - I am then directed to the page where I can click to view the log file, 'Download UNIX Shell Utility' or
    'Download Windows NT Command Utility'
    - When I click any of these items I get a page cannot be displayed error.
    Any ideas on why this is happening?

    Paolo,
    Thanks for the reply. I'm not able to view your TAR history without the proper CSI #. It looks like we're having the exact same issue as you. We've installed the recommended patches and followed directions and are still having problems. We've worked around the export problem and export seems to be working fine now, but the import isn't working.
    We run the import command on the mid-tier to create the importname.dmp file and then go into portal to import it and nothing happens. If we try to import in Check mode it states that everything works just fine, but when we actually go to import it and check the log file, there is nothing there indicating the import has failed.
    Now, if we create a generic page group with no content and export/import, it works fine.
    I'm at a loss here and deadlines are creeping up quickly. I just submitted a TAR on this issue as well. Let me know if you get anything resolved with this issue and I'll do the same. I appreciate any and all help
    Thanks,
    Jeremy

  • Weblogic 10.0 Page not found  error

    Hi, I'm just trying Weblogic 10.0 but when I try to add a datasource or press next it gives:
    Page not found
    The server has not found anything matching the Request-URI.
    The URI is:
    http://localhost:7001/console/7001/console/console.portal?CreateGlobalJDBCDataSourcePortlet_actionOverride=/com/bea/console/actions/jdbc/datasources/createjdbcdatasource/start
    Anybody knows how to solve this problem?
    Thanks,
    Johann

    Hi,
    I am also facing the same problem but only in a particular machine.
    Do we have to make any configuration to solve this problem ?
    If any one knows please help to solve this
    Thanks,
    Suresh

  • Page not found error when  navigating in Iview  application

    Hi,
    I have developed an application,and I am able to view a sucessfull preview of the Page as well.There are htmlb links on the page.When clicked,they navigate to the next jsp page.This iview was assigned to a user,and the portal was logged in though a local ip address.The application works fine.
    In trying to access the portal though an external Url,the initial page comes up perfectly fine.However the next page,does not come up,when a link on the first page is clicked.I get initially a popup with the message:
    "This page contains both Secure and Non secure Items
    .Do you want to display the non secure Items."
    The options on the Popup were yes,no,More Info.
    When I clicked yes then I get the display page not found error.The error is:
    " <b>The page cannot be found
    The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.</b> "
    The Information I get when I click on More Info is-
    <b>Downloading non-secure content from a secure Web site
    The Web site you are viewing is a secure site. It uses a security protocol such as SSL (Secure Sockets Layer) or PCT (Private Communications Technology) to secure the information you send and receive.
    When sites use a security protocol, information that you provide, such as your name or credit-card number, is encrypted so that other people can’t read it. However, this Web page also contains items that do not use this secure protocol.
    Given what you know about this Web site and your computer, you must decide whether to continue working with this site.
    If you do not feel confident about working with this site, click No.</b> "
    This problem occurs only to a particular user.If I add the role to another user,and view the iview I am able to navigate without problem(there is no popup as well).Even for this User,it is happening only when,I access through extrenal url,not when I access the portal through the local IP Address.
    Regards,
    Harish

    Hi,
    This is a further Update.The problem described above has  something to do with the roles.When some roles(cusom) are assigned the navigation occurs.Can you please let me know if there is any role related configuration with SSL.
    Regards,
    Harish

  • "Page Not Found" Err after arnd 5 mins of processing on SAP Trans iView

    Hello All,
    We are facing an issue related to a SAP Transaction iView on our portal.
    This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
    I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
    We have tried the following parameters without success:
    icm/server_port_0 = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
    icm/keep_alive_timeout (sec.) = 3600
    icm/conn_timeout = 5000
    rdisp/plugin_auto_logout = 1800
    Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
    For the current on-going discussion for the same issue, please refer:
    ["Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView;
    Thank you for your time!
    Regards,
    Gaurav
    Edited by: Gaurav Shah on Dec 9, 2008 7:22 PM

    Hi Gaurav,
    I know this thread is old. but i am getting the similar page cannot be displayed after 600 seconds.
    I changed the ICM timeout to 1800 from 600 but it still doesnt seem to work. Were you able to resolve the issue. If yes then please let me know the fix.
    Regards
    Aditya

  • "Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView

    Hello All,
    We are facing an issue related to a SAP Transaction iView on our portal.
    This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
    I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
    We have tried the following parameters without success:
    icm/server_port_0     = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
    icm/keep_alive_timeout (sec.)  = 3600
    icm/conn_timeout                = 5000
    rdisp/plugin_auto_logout       = 1800
    Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
    Thank you for your time!
    Regards,
    Gaurav

    Hello George,
    Thank you for the quick reply. I will surely try the option suggested by you.
    But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
    Maybe I should be looking at:
    SESSION-TIMEOUT due to kernel:
        Kernel parameter:    rdisp/gui_auto_logout
        Kernel parameter:    rdisp/plugin_auto_logout
    as per the SAP OSS Note: 705013
    But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
    Thanks,
    Gaurav
    Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
    Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

  • Ent 9 - Can't run mgmt console - admin.cwr gives Error 404: page not found

    Post Author: Alan Weiner
    CA Forum: Deployment
    We just did a fresh install of Crystal Enterprise 9.  When we try to run the Management console, we get an "Error 404: page not found"
      http://wdcwfc80/crystal/enterprise9/admin/en/admin.cwr
      Error 404: The page cannot be found

    Post Author: Alan Weiner
    CA Forum: Deployment
    From the server (although, it uses a browser to connect)
    colin mackenzie:
    Hi Alan Weiner.
    Do you get this message when you run this from the server? or just the workstation / client browser?

  • Page not found error in webdynpro Application

    Hi All,
    While we are opening a links getting Page not found error. This is  webdynpro ABAP application ,through Launch pad it is configured.
    We have recently upgarded our portal , previously it was working fine.
    R/3 is not upgraded .
    Regards,
    Krishna.

    Hi Krishna,
    Hope you are doing good.
    Kindly run the web diag tool as outlined in  note 1045019 or SAP Note No. 1332726 (depending on your version) and reproduce the issue.
    This will give you the exact reason why the issue occurs. Attach it here if you have any issues.
    Thank you!
    Kind Regards,
    Hemanth
    SAP AGS

  • Page not found error

    Hello,
    we have in our portal a home page with three iviews. Every iview includes a html-document from KM-repository.
    The iviews are included in a page and the page is included in a workset. In the first navigation level there is an entry called Home and in the second navigation level also.
    If we log in to our portal we can see this three iviews on our home page. But if we navigate in the portal to another navigation entry and then back to Home the all three iviews show an page not found error (HTTP 400). If we refresh the complete portal we see the three iviews correct.
    Why do we get an error if we navigate to Home and not when the complete portal is refreshed?
    Regards
    Philipp

    Hi,
    Are you clicking the back button of IE or clicking the Home Link in the portal?
    If you are clicking the Back Button and you get the no page found error, this behaviour is normal. If you want to use Back button you have to go for Light frame work page.
    If you are clicking Home link and still you get the errors then i suspect with respect to caching of the iviews. Try changing the cache properties of the iviews.
    Thanks,
    Regards,
    Aditya Metukul.

  • Page not found error after logging into oiddas

    Hi all,
    I have configured reverse proxy setup for my application server. from external portal is accessible( with proxy hostname externally and internally after login from internet) and also sso server administration site (same as portal ) but when i am trying to access oiddas page i am not able to login and i am getting page not found error. for ssocfg.sh i have given proxyHostName and proxyPort with https and i can see external name and it is redirected with external name for sso authentication but when i logged in i am getting page not found with http 404 msg and i have followed many docs in metalink w.r.t this error but couldn't resolve after too many trials and registrations. could someone help me on this. let me know if you need any information my internal address is http://localhost.localdomain.com:7777/ external(proxy)- https://portal.localdomain.com/
    Thanks

    Hello George,
    Thank you for the quick reply. I will surely try the option suggested by you.
    But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
    Maybe I should be looking at:
    SESSION-TIMEOUT due to kernel:
        Kernel parameter:    rdisp/gui_auto_logout
        Kernel parameter:    rdisp/plugin_auto_logout
    as per the SAP OSS Note: 705013
    But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
    Thanks,
    Gaurav
    Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
    Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

  • BP Maintenance Technician1.0 Page not found error

    Hi Gurus,
    I have deployed the BP Maintenance Technician 1.0  into the portal (EP7.0 SP9)and I have done the basic configuration, when I click on any iviews I am getting a page not found error. can anybody help me with the configuration settings.
    points will be awarded for helpful answers
    Jo

    Hi,
    I am also facing the same problem but only in a particular machine.
    Do we have to make any configuration to solve this problem ?
    If any one knows please help to solve this
    Thanks,
    Suresh

  • Travel Mgmt:Click on Create Expense Report -PAGE NOT FOUND or NOT AVAILABLE

    I am trying to configure Travel management in the portal.
    When I log into the portal as the user and click on:
    (1) Travel and Expenses -> Create Expense Report, the corresponding iview is displayed
    (2) But when I create a travel request. And then go to My Trips and Expenses and for the just created Travel Request, Click on the same link "Create Expense Report", I get PAGE NOT FOUND or NOT AVAILABLE error.

    Hello, there.
    I have a similar problem.
    Could u plz tell me how to resolve this problem?

Maybe you are looking for