WDA select-options value help configuration

Hello,
I would like to configure the value help in the select-options component in WebDynpro ABAP. I used the parameter I_VALUE_HELP_TYPE of the method ADD_SELECTION_FIELD, but I didn't know how to pass a correct value for this parameter. Could someone give me an example with coding? That would be great! Thanks in advance.
Regards,
Georg

For those of you who, like me, get a screen full of OTR keys on the buttons and tabs, the answer is on the first tab, 6th button. Note that it is based on SPFLI, so the expected linkage between CARRID and CONNID does not happen.
The code is in MAIN_VIEW method ONACTIONON_CRS_FLD_F4_CASES.
The essence of it is:
    wd_this->m_handler->add_selection_field(
        i_id                         = CARRID
        it_result                    = lt_range_table
        i_value_help_structure       = 'SFLIGHT'
        i_value_help_structure_field = "CARRID ).
    wd_this->m_handler->add_selection_field(
        i_id                         = CONNID
        it_result                    = lt_range_table
        i_value_help_structure       = 'SFLIGHT'
        i_value_help_structure_field = "CONNID ).
The result is that you select the CARRID, and that restricts the CONNIDs.
I have used SFLIGHT because it will give linked search helps for CARRID and CONNID. It works with parameters too, but remember GET_PARAMETER_FIELD is not currently implemented (it exists, but contains no code, so your program will seem to work, but it won't) , so use GET_PARAMETER_FIELDS which does work.

Similar Messages

Can i have html code for date select options (SEARCH HELP)

Hi frinds,
I have a BSP Page with input as date.
Can i have html code for date select options (SEARCH HELP)
Moosa

Hi
Please find the sample code below.
FROM DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X" <- Search help
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
                        value     = "<%= w_FROMDATE %>" />
TO DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X"
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
value     = "<%= w_TODATE %>" />
Thanks
kalyan

Select options values pass to function module

Hi all,
I want to pass the values entered in the select options to the function module. How should my function module interface be declared for passing the select options
I tried declaring like
t_range type data in the tables tab. But this throws error.
Please let me know how to pass select option values back to function modules.
Thanks,

Hi,
Check this code.
data: node_flights type ref to if_wd_context_node.
data: rt_carrid type ref to data.
data: rt_connid type ref to data.
data: isflight type table of sflight.
data: wsflight type sflight.
field-symbols: <fs_carrid> type table,
<fs_connid> type table.
Retrieve the data from the select option
rt_carrid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CARR_ID' ).
if rs_carrid is not initial. Here you can check that if rs_carrid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_carrid->* to <fs_carrid>.
endif.
Retrieve the data from the select option
rt_connid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CONN_ID' ).
if rt_connid is not initial. Here you can check that if rt_connid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_connid->* to <fs_connid>.
endif.
if <fs_connid> is not initial and <fs_carrid> is not initial.
Retrieve that data from the database. Normally it is suggested to
encapsulate the data retrieval in a separate class.
For simplicity, the SELECT statement has been implemented here.
clear isflight. refresh isflight.
select * into corresponding fields of table isflight from sflight
where carrid in <fs_carrid>
and connid in <fs_connid>.
endif.
Bind the data to the context
node_flights = wd_context->get_child_node( name = `FLIGHTS` ).
node_flights->bind_elements( isflight ).
Hopes this will helps you.
Regard
Manoj Kumar
Edited by: Manoj Kumar on Mar 16, 2009 10:41 AM

Passing SELECT-OPTIONS value to Function Module

Hi,
I need to pass select-options value to a function module.
Code is like the following:
SELECT-OPTIONS seltab FOR object-type.
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
I have found a similar problem in the SDN forum: How to pass select-options parameter to FM?
However, that could not help me much in solving my problem.
So far I have tried to created a structure in DDIC with the following components for the select-options:
SIGN - BAPISIGN
OPTION - BAPIOPTION
LOW - ZBWOBJECTTYPE (my type)
HIGH - ZBWOBJECTTYPE (my type)
and subsequently a table type for this structure which is specified in the "Import" tab of my function module.
Unfortunately, when I ran the program a runtime exception occured (CALL_FUNCTION_CONFLICT_TYPE).
Could anyone please help me on this issue?
Thanks in advance.
Regards,
Joon Meng

Hello Joon,
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
You have defined SELTAB as a SELECT-OPTION.
So when you pass only SELTAB, the header line is transferred to the FM. When you pass SELTAB[] the whole table(range) is passed.
It is similar to the concept of an internal table with header line.
Hope i am clear.
Anyways how have you defined result_tab and sel_tab ?
BR,
Suhas

At selection-screen value- help

Hi All,
I have a requirement that based on a radio button one at selection-screen value-help is triggered and on based on a different radio button another at selection-screen value-help should be triggered.
can it be achieved.
Regards,
Jeetu

AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
|   FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
      {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
    {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
      sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
    MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
                      ID 'CARRID' FIELD p_carrid
                      ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
    MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
    MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
    IF sy-ucomm = 'ONLI'.
      CALL SELECTION-SCREEN '0500'.
    ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
    IF s_conn IS INITIAL.
      MESSAGE 'Please enter values' TYPE 'W'.
    ELSE.
      SELECT *
             FROM sflight
             INTO TABLE sflight_tab
             WHERE carrid = p_carrid AND
                   connid IN s_conn.
      IF sy-subrc <> 0.
        MESSAGE 'No flights found' TYPE 'E'.
      ENDIF.
    ENDIF.
ENDIF.
Main program
START-OF-SELECTION.

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
    l_repid             type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      dynpprog         = l_repid
      dynpnr           = '1000'
      dynprofield      = 'S_FIELD-LOW' "Select options - low value
* etc

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

Filtering internal table using select-option values

Hi,
I got an internal table with select-option values. for eg. it_perno with the values I BT 000160 000170.
Now i got another second internal table which is have the person number. Now i need to filter this second internal table based on the values from the select option table. my question is
i can collect all the values from 160 to 170 in a separate table by looping over the select option table. and then based on the values filter the second internal table person number.
But what would be the case if the select option contains both intervals and multiple options. For eg.
I BT 000160 000170.
I EQ 000185.
So can you suggest any good solution, that based on this select option table i need to filter the second internal table Person number.
Thanks in advance.
Regards,
anbu.

Hi,
Can you not use the select-options in the Select query while populating the internal table.
SELECT pernr FROM pa0000 INTO it_tab WHERE pernr IN s_pernr.
If you cannot do this and you do not want to delete the unwanted entries, then you can use the WHERE clause in the LOOP statement to process the specific entries required:
LOOP AT it_tab INTO wa_tab WHERE pernr IN s_pernr.
Regards,
Aparna Alashe.

Adding select-option value in selection screen of FBL5N tcode.

Hi Experts,
I have one requirement that to add a Header Text Field(BKPF-BKTXT) in section screen of standard program RFITEMAR(tcode : FBL5N), i tried to add that field but it was not displayed where i required, i mentioned below where i required.
Customer account
Company code
i required under company code select option value in same selection screen block.
Please do the needful.
thanks in advance.
gsreddy.

Hi,
If you get the access key it is possible to edit the standard program,
How u tried to add the field???
regards,
Mullai

How to pass select option value to function module while using service call

Hi,
I have select-option in my WD application. To collect data based on user input im using service call. How to pass this select option values to my RFC.
rgds
sudhanshu

Hi,
Thank s for your reply. In fact im doing similar with following variation:
i) collected range values using get_range* method.
ii) separate low and high values as:
read table <field2> index 1 into wa_range.
vert2_low = wa_range-low.
vert2_high = wa_range-high.
(Please note that in RFC I have taken two importing parameter as s_vert_lo and s_vert_hi)
iii) Now setting these RFC attribute as:
lo_el_importing->set_attribute(
    EXPORTING
      name = `S_VERT_LO`
      value = vert2_low ).
and
lo_el_importing->set_attribute(
    EXPORTING
      name = `S_VERT_HI`
      value = vert2_high ).
iv) In RFC im having my query as :
select <fld list> from BUT000 into table itab where vertical in r_vert.
Here, r_vert is a range defined as:
ranges r_vert for <fld refrence>
r_vert-sign = 'I'.
r_vert-option = 'BT'.
r_vert-low = S_VERT_LO.
r_vert-high = S_VERT_HI.
append r_vert.
Issue here is with ranges. if im passing both low and high values it is fine but if only low value being passed it is not giving me any record.
Please suggest.
Rgds
Sudhanshu

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
          bukrs TYPE bukrs,
          werks TYPE werks_d,
          matkl TYPE matkl,
        END OF t_tab.
DATA: w_tab TYPE t_tab,
            i_tab      TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Passing select-options value in method

How to pass select-options value in method ?
Example:
Select-options: carrid for spfli-carrid.
class cl_myclass implementation.
select carrid connid from
spfli where carrid in carrid.
endclass.
Thanks

Hello Anee
The coding of this functionality is quite simple:
REPORT zmy_report.
DATA: go_myclass   TYPE REF TO zcl_myclass,
           gd_repid         TYPE syst-repid.
PARAMETERS:
p_bukrs   ...
SELECT-OPTIONS:
o_kunnr ...
START-OF-SELECTION.
gd_repid = syst-repid.
CREATE OBJECT go_myclass
    EXPORTING
      id_calling_program = gd_repid.
And that's how your CONSTRUCTOR method should look like:
METHOD constructor. " IMPORTING parameter id_calling_program
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
    CURR_REPORT = id_calling_report
TABLES
    SELECTION_TABLE = me->mt_selopts.
" NOTE: define mt_selopts as instance attribute of table type RSPARAMS_TT
ENDMETHOD.
Finally you have to extract the parameter and select-options from MT_SELOPTS.
Regards
Uwe

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

Displaying Selection option values in header using alv-factory

Hi all,
I am using alv factory class 'CL_SALV_TABLE'.
I want to display selection-option values on my header.
I have creted grid using class 'CL_SALV_FORM_LAYOUT_GRID' and am displaying other values.
But am facing problem in displaying selection option values.
Any pointer on this will be GR8.
Thanks & Regards.
Yats.

Hi,
Use this sample code.
form top_of_the_list_main changing lv_grids type ref to cl_salv_table.
*Creating instances of the clases
data :     lv_grid   type ref to cl_salv_table,
             lv_header type ref to cl_salv_form_element,
             lv_layout type ref to cl_salv_form_layout_grid.
move lv_grids to lv_grid.
*Creating the layout object
create object lv_layout.
*Setting the Header Text
lv_layout->create_label(
                         row     = 1
                         column = 1
                         text    = text-008 ).
lv_header = lv_layout.
lv_grid->set_top_of_list( lv_header ).
endform.                    " TOP_OF_THE_LIST_MAIN
Loop it and keep changing the row and colom..Pass the selection option to the text field.
Regards
Ansair

SELECT-OPTIONS Values via DYNP_VALUES_READ in a Search Help Exit

Hi all,
I appended a standard search help of a standard report with a search help of my own. Now I am trying to retrieve the values the user has entered into the selection screen of the report using the FM DYNP_VALUES_READ in my search help exit FM. It works fine for single values defined by PARAMETERS and for low and high values of SELECT-OPTIONS (so_example-LOW and so_example-HIGH), but I need the entire SELECT-OPTIONS table. I cannot make any changes in the report, so do you have any solutions I could implement in my search help exit FM?
Many thanks!
Vladan
P.S.
I found several questions on this topic but they either just different enough not to be applicable in my case or the formatting has made the replies useless.

Most of the time we just copy the standard FM F4IF_SHLP_EXIT_EXAMPLE to a new one and give our own name.
You can see that on the 12th line there is the following code
* EXIT immediately, if you do not want to handle this step
IF CALLCONTROL-STEP <> 'SELONE' AND
     CALLCONTROL-STEP <> 'SELECT' AND
     " AND SO ON
     CALLCONTROL-STEP <> 'DISP'.
     EXIT.
ENDIF.
you should comment those line in order for the control to reach the PRESEL step (which is already defined in the SH Exit FM) which is on line 44.
Most of the time, when someone says they don't hit PRESEL, this is the problem.
Edited by: ajithkpunnoose on Jan 5, 2012 12:00 PM

WDA select-options value help configuration

Similar Messages

Maybe you are looking for