Wdm drivers window protection error

Any time I try to install WDM drivers (i've tried quite a few different ones), windows reboots with a protection error. Anyone have any ideas???
Thanks in advance.
Asus P3V4X Appollo Pro 133A
PIII 667 EB slot 1
512/133
Win 98 SE
MSI Geforce4 4200 ti VTD 8X (8894)
41.07

I believe the incompatibility is due to software not hardware. I did have video capture working with a bare install with the 41.07's and the 1.23's. Now I have no crossbars or anything....kind of weird. I do not think it is an IRQ problem either. At this time I don't think I want to reinstall windows, though I probably will for the umpteenth time eventually. Isn't windows supposed to do a million things at one time and make me an omelet in the morning....brown toast please!!

Similar Messages

Windows protection error message

MOBO KT6 DELTA FISR
AMD 2500+ (aqxea 0330...)
HD ST380013AS (SATA 80GB)
2X512MB DDR400 (Kingston kvr400x64c5/512 - w942508bh-5)
DVD R/W LG gsa-4040b
COOLER k7 volcano 11+xaser edition
Graphic Card:XFX GEFORCE FX5200 AGP 8X 128mb ddr tv out (model pvt34kn)
I will explain step by step, to be sure that I am forgetting something or doing something wrong.
1-After assembled the system,turned on, went to the bios to do same basic changes(fsb=100, enable v8237 sata-ide controller, boot devices ,....)
2-boot from STARTUP disk (w98se), fidsk, format c.
3-Installed Windows 98se(at the end I got two yellow quetion mark, at device manager tab:PCI RAID CTRL and PCI UNIVERSAL SERIAL BUS. Left as is and go fwd.
4-Installed VIA Chipset 4in1 drivers( w98se working fine, but still using windows default VGA driver)
5-HERE BEGIN THE PROBLEM..After install the driver for the video card(the last one downloaded from the site (http://www.xfxforce.com/product_view.php?sku=PVT34KNT), the system ask for reboot, and give a msg WINDOWS PROTECTION ERROR, YOU NEED RESTART YOU PC. the same happens if restart, from the cold.
6-For Troubleshooting purposes I did:
-Installed video card at ASUS BOARD A7S333, works fine with the same drive that failed before.
-Installed video driver before install 4in1. Still the same error.
note-every time I reinstall , I did a fresh install, means format c,boot from startup disk,install w98se from cd)
ANOTHER THING:Once time, just after install w98se, I installed Partition Magic 8, with intention of create an extended partition to copy all necessary programs in there, that way avoiding changing CD´s anyway, for my surprise Partition Magic didn´t recognize the sata drive that is normally recognize by windows(PM8 program itself is good , I am sure that)
What is be happening? It looks like same conflict issue between my mobo and Nvidia video driver!!!! Did I something wrong?
and about PM8 should I do anything related to the drivers or bios, before load PM8?
please help!!!!!!!!!!!!!!!!!!
gil

Windows 98/98se doesen't support more than 512 Mb. memory. Take off one module and all should go OK.

Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

Hi I wondered if you could help me.
Im running Windows 98 and have a creative webcam installed. i connect it and it works fine in creative webcam monitor. but when in msn messenger 7.0 i click tools-----> webcam settings the computer then freezes up then after a few minutes the screen goes black with "Windows Protection Error Please Restart Your Computer" comes up.
I'm also running
McAfee Internet Security 7
Spybot
Ad-aware
Spywareguard
A-squared
Spywareblaster
Ive also tried running defrag and scandisk to no avail.
Thanks.

Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

Km2m windows protection error

I cannot get my pc to load windows, no matter what, tried win98se and winxp pro. just keeps giving me windows protection errors and telling me to reboot. Winxp tells me there is a memory error or something. It always happens when i get to driver loading part of the install. Have tried the install with nothing in but hdd and cdrom drive.
Help me pleassssssssssse.

The setup is a athlon xp2000+
256 mb of ddr ram
radon 8500 agp
creative labs soundblaster live 5.1
40gb on primary master
dvd-rom on primary slave
cd-burner on secondary master
any other info you need, just let me know.

Windows won't boot! Windows protection error.

I just upgraded my mother board to a MSI and now I can't boot to Windows at all! I'm using two different versions of windows on seperate hard-disks (never at the same time) and both won't boot. I can get to Safe-mode in Win98. My system was fine before I upgraded.
System:
Motherboard - MSI, K7N2 Delta, Nvidia nForce 2 based.
CPU - AMD XP 2400+ T-bred.
CPU Cooler - 2 x 8000-rpm fans on Kanie Hedgehog (big heatsink).
Memory - Kingston 256Megs, two sticks for 512megs. (Says: Kingstort /VR, KVR266X64C25/256. I don't know much about memory.) It fits the DDR1 slot.
Graphics - Nvidia 5600.
Power supply - New, Allied brand, ATX-style, 450Watt.
OS - Windows 98, Windows XP (SP1)
(Win98 and WinXP are on seperate hard disks. Never used at the same time).
Problem:
1. When I boot to Win98 it just says "Protection Error, you will need to restart your system".
2. When I boot to WinXP it says "A problem has been detected and windows has been shut down to prevent damage to your computer."
Fixes and diagnostic:
1. Diagnostic lights on mother board cycle and and say OK.
2. I can get to Win98 Safe-Mode or Command prompt.
2. I don't have any other PCI cards installed except video.
3. I'm using only one of the memory sticks just to rule out the other (tried both).
4. I have most of the on-board peripherals disabled (sound, ethernet, serial. parallel, etc...).
5. Tried upping the voltage on memory. Same problem.
6. Tried setting memory for 100mhz. Same problem.
7. Tried reseating the memory. Same problem.
8. CPU temp is well within range at around 109F.
Questions:
What could the problem possibly be? I will try anything!
1. Is there some kind of safe mode for the hard drive settings?
2. Is there some kind of safe mode for memory speed?
3. Give me some hints! Upgrading the MB shouldn't be this hard! What am I overlooking? Thanks for any replies!

Quote
Originally posted by Falconis Progmadn
This can easily be caused by not setting the jumper pins correctly when having both of the HDDs installed on the same IDE cable.
Obviously you would have to change the jumper short every time you retry each HDD.
I am not following your line of thinking here. Win98 needs to on the primary drive, primary channel in most cases, yet XP can boot from any location, and any drive letter. So why would there be a need to constantly swap jumpers? Only thing needed is the Boot.ini file on the main drive, and it will boot from any OS listed there.

Windows 98 protection error

I know 98 is not now supported. I now have Vista.on a different computer but I need to access floppy disc info.my 98 now will not start normal mode it returns ( Windows Protection error need to restart computer ) it will start Safe Mode but no access to
CD or Floppy use I seem to have exhausted all recommended options for a restart but it appears this error over rides everything one attempts in Safe Mode, there is no error no. In 98 there is no system restore, I cannot use Start up , or computer recovery
disk How can I resolve this please

Hello,
I'd ask in the Windows forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

AWE64 WDM drivers for Windows 98

Hi!
I've put together a music computer running Windows 98SE on a PC with the excellent AWE64 Gold sound card (yes, i know there are newer cards). In order to install the ASIO4ALL drivers for reduced latency, the sound card needs WDM drivers. However, browsing the Creative support download page, i can find no trace of them. The only thing i can find are the VxD drivers. I'm quite sure that there were WDM drivers for this card at one time but now they have seemingly vanished without a trace. Maybe i'm just missing something obvious here.
Anyone know where to locate these drivers?
Thanks.

Have you searched Google for them? Or try using some P2P program like DC++ and search for the drivers?

Windows File Protection error when installing 9i client

While installing the 9i client I am getting a Windows file protection error message on all 5 of the test machines.
If I cancel out of the message the install finishes correctly and everything seems to function properly.
However, it is prety counterintuitive to have to cancel out of the message when we are wanting to do these installs in silent mode.
Anyone else have this problem, or any ideas on fixing?

nm, fixed it myself.
The Oracle install was replacing regsvr32.exe with an old version. When WFP detects a file protection problem, it first looks at the %systemroot%\system32\dllcache dir for a known good copy of the file to restore. If it doesn't find one in there, then it pops the dialog up and asks for a CD. If it does find one then it silently restores it in the background.
So, now at the beginning of my script I have a script checking the dllcache dir for regsvr32.exe, if it is there it moves on to the install, if it is not then it copies the one from their current system32 dir into the system32\dllcache dir. That way when Oracle replaces it WFP will silently restore their previous version.
-C

Windows Reource Protection Error Build 10049

I am currently downloading Build 10061 and the download goes on for 15-20 minutes and the laptop gets hanged and i have to use power button to shut it down and turn it on again for the download to continue. I am not able to run the SFC command which return
Windows Resource Protection Error and stops at 8%. Moreover , there are no settings in Windows Update which allows us to manually select which updates to install.

I am not able to run the SFC command which return Windows Resource Protection Error and stops at 8%. Moreover , there are no settings in Windows Update which allows us to manually select which updates to install.
Hi,
As Kapil mentioned, if sfc doesn't work, then you might need dism, you can use a 10041 iso as the repair source.
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/how-to-repair-your-system-files-using-dism-and-sfc/1021b42a-09ff-41a0-a95a-48f3ee3ae699
"Moreover , there are no settings in Windows Update which allows
us to manually select which updates to install."
This is the default design in the preivew build version, are you able to successfully upgrade to 10061 now?
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ActiveMovie Window Application Error

As I try to open a project, and just before PE9 crashes, I get the following message:
ActiveMovie Window: PhotoshopElementsOrganizer.exe - Apllication Error
The instruction at "0x1457f2da" referenced memory at "0x14cbf000". The memory could not be "read".
Clck on OK to terminate the program
Click on CANCEL to debug the program.
No matter which option I take, the program exits. I have no idea what is going on.

System:
Microsoft Windows XP Professional (5.1, Build 2600)
Intel(R) Core (TM)2 Duo CPU
E6850 @ 3.00GHz
2.99 Ghz, 3.00 GB of RAM
Display 1
Device
Name: NVIDIA Quadro FX 1700
DAC Type: Integrated RAMDAC
Approx. Total Memory: 512.0 MB
Current Display Mode: 1024 x 768 (32 bit) (75Hz)
Drivers:
Main driver: nv4_disp.dll
Version: 6.14.0011.6947 (English)
Date: 01/12/2008 20:00:11
Mini VDD: nv4_mini.sys
DDI Version: 9 (or higher)
Display 2
same as above except
Current Display Mode: 1152 x 864 (32) bit (60Hz)
Sound
Device
Name: SoundMax HD Audio
Device ID: HDAUDIO\FUNC_01VEN_11D4DEV_1984SUBSYS_1
Manufacturer ID: 65535
Type: WDM
Drivers
ADIHAud.sys
Version: 5.10.0001.5491 (English)
Date: 01/12/2008 19:57:57
WHQL Logo'd: n/a
Provider: AnalogDevices
HDDs
2 x 74.4GB, 1 x 1.36 TB; Local Disk C:\OS, programs, 31.3 GB in My Documents inc. 13.6GB of PreE9 files with 1.22GB free ; Local Disk D:\ 20.1GB music, 18.5GB Nikon photos & videos, 14.7GB of PreE9 files, with 5.47 GB free; External Drive F:\ Seagate \ WDC WD800ADFS-755LR2 inc 22 GB of PreE9 files with 1.26TB free.
Procesor scheduling & memory usage set on "programs".   Total paging file size for all drives: 3069 MB; Microsoft Windows XP Professional Version 2002 Service Pack 3; NLE: not sure how to identify this; Steam and Skype can be going on in the background.
ASSETS:
Nikon CoolPix6000.   AVS VideoConverter 7.1 - Non-activated identifies my avi files as - Video Codec: IBM Motion JPEG; Frame Size: 640 x 480 pixels; Bitrate: 8754 kbps; Frame Rate: 30 frames / second; Audio Codec: PCM; Sample Rate and Size: 8000 Hz 8 bit; Bitrate: 64 kbps; Channels: 1.
After repeated attempts dealing with low memory messages and in some cases total system crashes, my most recent effort involved recreating my project instead using Windows Movie Maker to save each video as "DV-AVI (NTSC)"   After adding photos, videos, and text, I had commenced adding audio (.wma), when the system crashed and now I can't open my project as the file is damaged. The total failure occured as I was trying to slide a .wma file along the Audio 2 bar. Appears as though days of work gone! In fact, I have been playing around with this for almost two months now. Good thing I have patience.
PROJECT:
A 45 minute DVD of photos and video clips with background music.   Maybe it is not even possible to make a DVD? I don't know. Project preset - I don't know what this means.
Other things:
Installing PreE9 in the first place was a challenge. I started with the Photoshop Elements, and then PreE9 trial version and when I upgraded I ended up unistalling the trial and buying new instead of doing the upgrade fix. I created my project as a slideshow viewable using windows media player. The quality wasn't all that great so then I downloaded the trial version of PreE9. The quality was great so for the last month or so I have been trying to recreate my project.
My originally referenced error message occurs whenever I try to open "organizer" so at this point it appears as though I can no longer get into organizer even though I can still open and create a project.
When I ran into space issues, I purchased the external driver initally for my son's stuff (games, Minecraft, Steam and whatever else), then I started moving other files in an effort to create space on C:\ and D:\   I may have moved stuff around trying to create space only to confuse everything. Confusing to know what files to delete to get rid of some of my aborted projects. Pushing 50 GB of Pre9 files at this point in three places basically all for one project. Some cleanup needed here.
Thank you for your interest in my situation.

Loading wdm drivers blue screen

I am trying to load the wdm drivers to use with my 4600ti. But everytime it loads the driver for the tvtuner device i get a blue screen, it reports back an address error on the file nvtunep.sys.(it loads the drivers for all the other capture devices) I have tried the latest wdm drivers from nvidia and also the drivers that came on the disk.
I have had this working before so im not sure why its not working.
Thanks in advance
Mrlargeit

Hi,
After a lot of tries I have tried Windows 8.1. This time when I install the drivers the graphics card is shown in device manager but I cannot open Catalyst manager. I got the message:
"catalyst control center cannot be started there are currently no settings that can be configured"
This is what I tried:
1.Downloaded the drivers from lenovo website for chipset, Intel HD graphics and AMD graphics
2.Swhitched off the internet so that Windows doesnt download drivers for the Intel HD graphics
3.Uninstalled Intel and AMD drivers
4. Installed the Intel driver
5. Installed the AMD driver
This doesnt seem to work. Some time after I install the AMD driver, the screen goes black and even if I restart the PC. Only thing I can do is to open in safe mode and uninstall the AMD drivers. I dont know if it does matter but I havent activated the Windows yet (I dont want to by them unless I know that my laptop is fully functional).
This is what I get in hardware ids in device manager for the video controller.
PCI\VEN_1002&DEV_6600&SUBSYS_380117AA&REV_00
PCI\VEN_1002&DEV_6600&SUBSYS_380117AA
PCI\VEN_1002&DEV_6600&CC_038000
PCI\VEN_1002&DEV_6600&CC_0380

Windows live error code:8501004

I am using Nokia lumia 710 phone. The software is Windows 7.8.
From past few dates there is the problem in synchronising of the windows live account. The error displayed is:
"Windows live Error
There is a problem with the way m.hotmail.com is setup, Contact a support person or your service provider.
error code:8501004."
Kindly help.
Dhiraj C

Hi Len,
Since Windows Live is not a part of feature in Windows 7, some required information are needed for us to help you. Are you using Windows Live Mail in Windows Essentials? If you are, try reconfiguring the account by following the steps here on how to
remove and re-add again the account.
http://windows.microsoft.com/en-US/windows-live/mail-add-email-account-faq
For further support about Windows Live Mail, you could follow Rick’s suggestion or posting in the Windows Essentials Forum, you can get more effective suggestion by other experts who familiar with Windows Live Mail. Your understanding is highly appreciated.
http://answers.microsoft.com/en-us/windowslive/forum/livemail?tab=Threads
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows phone error code 80188301,. please need help

i am getting an error while updating my windows phone. windows phone error code 80188301,.
please need help

Hi,
If issue persists after using the solutions provided by Aman Raizada, then I would suggest you ask the question in Windows Phone support forum:
http://www.windowsphone.com/en-US/how-to/wp-support
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
I created the image using MDT2010 and used one of the 380's as a reference.
All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine. WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites. I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
I'm currently running a SFC /Scannow on one of the computers, and now it has finished. It gives the error: Windows Resource Protection could not start the repair service. I'll have to google that next.
The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
I guess I'll have to look at all of the other machines to see if they have the same updates installed.
Anyway, has anyone else had this problem? I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
Thanks for any help that you can provide!
By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 04:19:02:342 940 cd4 AU #########
2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU #############
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
2010-12-21 09:02:03:476 940 b4c AU #############
2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
2010-12-21 09:02:03:477 940 b4c AU #########
2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:03:488 940 e38 Agent *************
2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:03:488 940 e38 Agent *********
2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent *********
2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:36:165 940 e38 Agent *************
2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:02:36:165 940 e8c AU #########
2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU #############
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:37:872 940 b4c Service *********
2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
2010-12-21 09:06:37:872 940 b4c Service *************
2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
2010-12-21 09:08:37:104 940 e84 Service *************
2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
2010-12-21 09:08:37:104 940 e84 Service *********
2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
2010-12-21 09:10:20:422 940 e84 AU #############
2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
2010-12-21 09:10:20:422 940 e84 AU #########
2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:20:425 940 36c Agent *************
2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:20:425 940 36c Agent *********
2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent *********
2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:52:779 940 36c Agent *************
2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:10:52:780 940 ba0 AU #########
2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU #############
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

Adobe Acrobat 7.0 Pro PC with Windows 7 - error mess "Adobe PDF Printer - not available" Help?

Just loaded my old Acrobat 7.0 Professional on new PC with Windows 7 - Error message "Adobe PDF Priner not available. Therefore do not have option of Adobe printer when using Word.
Any ideas as to what - if anythjing I can do?

Hi,
Technically acrobat 7 not not designed for windows 7 OS. You can try to install the pdf printer manually but it's not guaranteed :
Click the Windows "Start" menu, select "Control Panel," choose "Hardware and Sound," click the "Add a Printer" link under Devices and Printers.
Click "Next" and select "Local Printer Attached to This Computer."
Remove the check from "Automatically Detect and Install My Plug and Play Printer" and click "Next."
Select "My Documents\\*.pdf (Adobe PDF)" in the port selection drop-down menu and click "Next."
Select the "Have Disk" option and click the "Browse" button to open a dialog box.
Select the "AdobePDF.inf" file located in the AdobePDF folder in your Program Files directory under "Adobe" | "Acrobat 9.0" | "Acrobat" | "Xtras."
Select the first item on the list of Adobe PDF Converter options and click "Next."
Type "Adobe PDF" in the field for a printer name and click "Next."
Wait for two minutes for the system to process the drivers and click "Finish" to close the Add a Printer wizard.
Hope this helps.

Wdm drivers window protection error

Similar Messages

Maybe you are looking for