WDS 2008R2 install storage drivers?

Hey, so I had a new type of server come in today and I have my WDS setup. everything I guess was ready to go with the older servers we had - driver wise. no problems... So when these new servers first tried to boot into the PXE, it gave me an error about
the network card driver... So I added the correct drivers to a driver package on the wds and then applied it to the image. Now it boots perfectly, until it gets to the part about formatting the drivers. When it gets here it cannot find the driver for this...
I have the correct driver as I can load driver and go to my USB to select the driver and all is good... But is there anyway I can inject that driver for the raid controller into the image, so I do not have to load drivers every time? So that it finds the drives
automatically?
So far I have tried to add it to a package like I did with the network driver, but this did not work. Then I tried using dsim to add the driver to my image.wim, but this did not resolve the problem either...
Any ideas on what we need to do?
Thanks,
Steve

So I get past the portion to select the image from the wds and then it comes up with this:
We couldn't find any drives. To get a storage driver, click load driver.
This is what I want to avoid doing.
hey, so here is the files:
https://drive.google.com/folderview?id=0B3FUOb2l0c6sVXhFeDM4cWstV3M&usp=sharing

Similar Messages

Installing chipset drivers vfrom WDS

Hi there. I have some computers and WDS server installed. I imported all drivers from vendor's disk to WDS. VGA, LAN, Audio drivers was installed from WDS, but OS alaways install default drivers for chipset drivers and SATA/ACHI drivers, not from WDS.
How to make OS to install all drivers from WDS?

It's probably because of the driver rankning.
Read more about it here:
http://technet.microsoft.com/en-us/library/hh825697.aspx#DriverRanking

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

OVM 2.2: Installing paravirtualization drivers

After installing paravirtualization drivers on a windows guest, should you update any settings on the hypervisor?
Like change the storage and network types?

roynor wrote:
After installing paravirtualization drivers on a windows guest, should you update any settings on the hypervisor?
Like change the storage and network types?
Yes, see this manual for more information: [Windows Paravirtual Drivers Installation Guide|http://download.oracle.com/docs/cd/E15458_01/doc.22/e15298/toc.htm]

Mass Storage Drivers to save Zen Nano Plus...[HALLELUJAH SOLVEDDDD!

Okay, my Zen Nano Plus was working fine until about two days ago, when it just started shutting off. The battery was full, and I switched batteries three times, but it still wouldn't stay on. I looked through the forums, and there was advice to update the firmware. [I had ..0] I downloaded it [.3.03], and ran it, but then it said that it couldn't find the hardware for the software [or the software for teh hardware?] and I didn't know what to do, but the computer [or whatever] decided to disconnect the Nano from the comp, so there was no firmware on the player at all. And now it won't turn on.
So I looked on the forums for THAT, and it was advised to download the Mass Storage Drivers, so I did. Only I don't know if I'm supposed to double click the icon and execute the program before I do the whole "push play before connecting the player to yor computer and continue holding play for ten seconds" thing, but I did, and I don't know if I was supposed to do, and somebody please help meh because I love my Zen and if he dies I am going to die as well. And be really bored during my classes.
Also, I am running on Windows ME.Message Edited by rubyandrest on 0-29-200708:4 PM

Dude...i have been a loyal customer of creative for years....i just updated my firmware on my nano plus and my zen shut down....no reset...nothing. i sent an email and i recieved a generic email about paying for contact help. they have lost a loyal customer and i am telling all of my friends to never buy a creative product. mine was fine and then i saw a firmware upgrade and thought, "wow, this would be great". then after installing it is useless. no help from creative at all. i have always had soundblaster cards and creative speaker systems so i figured id get their mp3 player...now i will never patronize their company again. go get an ipod. i am on payday! they will probably delete this post and deny me access to the site after this, but i am a marketing management major and this is a big No No for companies that wish to stay around. Creative will be gone in a few years if this is the service they offer.

Windows XP/64bit cannot install MPA drivers for C5

I'm successfully using Nokia OVI Suite for my C5 on windows XP / 64 bit.
But The OS cannot install the MPA drivers for accessing the device directly in Windows Explorer. Every time I connect the mobile using "mass storage" or "data transfer" mode (don't know the correct names - I'm using the german interface), the OS tries to install the drivers and finishs the "New Hardware"-dialog with the following message:
There was a problem installing the hardware: C5-00
An error occured during the installation of the device.
The class installer has denied the request to install or upgrade this device.
Please help!
Kind regards,
Doris C.

hi dunchilla,
Could you please try this once?
1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
2. Delete the files from here If anything is there
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Please search and download MSI clean up utility from microsoft website
Once installed please select the programs related to Nokia and click remove.
Restart Computer.
Then download from microsoft website and install Windows Installer, so that the installer is upto date.
4. Restart the PC
5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
6. Connect the device and select pcsuite mode
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Qosmio F60 Win 7 clean install plus drivers

Hi
I would like to clean install win 7 64 bit on my F60. I've already worked out how to change my boot sequence, [ with the help of this forum], so I'm ready to format & reinstall. However my concerns relate to reinstalling drivers specific for the F60.... Any advice on this process would be appreciated. Is it a matter of just downloading from [http://www.mytoshiba.com.au/support/notebooks/qosmio/f60/pqf65a-00y002/download?os=25] & installing as I need. Can this be tricky?
Any thoughts & guidance appreciated
Regards Lantana
Also would like to update bios...is there a step by step process for that too?

I have a Qosmio F60 & have done a clean install. I'll run you through the steps.
1. Make recovery disks before doing anything else. It's a good backup should there be any problems & will allow you to return the laptop to "out of the box " state if you want. Once the Recovery disks have been made (about 3 or 4 DVD'S), you can delete the recovery partition, but if you're unsure I would leave it as is.
2. There is a folder containing all your drivers and programs on the C drive. Back it up to DVD or a USB drive.
3. Back up your activation information. I used Token Restore (Google it). Back up your data.
4. Install WIN7, use the advanced option, reformat your C drive. Make sure you install the same Win7 version that came with your laptop (ie Home Premium, Pro ect). Don't enter your activation details at this time, but use Token Restore to do this after installing your drivers. After you install Win7, you'll have basic functionality, ie your mouse touchpad will work, cd drive will work ect. Display will be at a lower resolution.
5. Install drivers & utilities. I installed the following in this order.
Intel chipset driver
Intel turbo boost driver
Intel management engine interface
Intel rapid storage driver
NVIDIA display driver
Realtek audio driver
NVIDIA HD audio driver
Dolby Control Centre
HDMI Control Manager
Realtek LAN driver
Realtech Wireless LAN driver
Bluetooth Monitor
Toshiba Value added package (custom install... I didn't install Zooming Utility)
Ricoh card reader
Synaptics Touch Pad driver
Winbond CIR driver
Yuan DVB Tuner driver
Toshiba Eco Utility (optional)
Toshiba HDD Protection
Toshiba Disc Creator (optional if you have other CD/DVD burning software)
Toshiba DVD Player (optional, it upscales DVD's, but not much improvement over WMP for playing DVD'S)
Toshiba Remote Control Manager
WinDVD BD (for playing blu-ray) & the update downloaded from Toshiba website.
6. Install your own software, antivirus, data, restore your activation information then run Windows Update. Also worth running a good defrag program like MyDefrag or Puran Defrag (both free).
I would install the recently released BIOS update prior all this.
It is possible to trim the installation back even further, but I find this gives me full functionality while removing most of the bloat. I do find this better than simply uninstalling unwanted programs, as some like Norton AntiVirus are almost impossible to fully uninstall.
Hope this helps.
Message was edited by: Richo

Install all drivers + vNIC/vHBA configuration on W2k8R2 on B200M3 server

Hi everybody,
I am a network engineer and rather a newbe on system…
I have just installed a w2k8R2 64bit on a B200M3 in our new UCS architecture (local storage; W2k8 as bare metal OS)
3 questions:
What is the best way to install all W2k8R2 drivers for this B200M3 server ? At present, I have many unknown hardware; I have just install manually the drivers for VIC 1240 by using ucs-bxxx-drivers.2.0.3b.iso or/and ucs-bxxx-utils-windows.2.0.3.iso. I looked for a exe to apply all W2k8R2 drivers for B200M3 but I could not find it.
The Service Profile of this server allowed 3 vlans : 1 natif + 2 tagged. In the properties of the network card under W2k8, I could not have any option to active the tagged. How can we do that?
The Service Profile of this server has 2 vHBA. How can i configurate the failover between fabricA and FabricB
Many thanks in advance.
Nicolas.

Hello Nicolas,
You are on the right track. Mount the ucs-bxxx-drivers.2.0.3b.iso image via vmedia and browse it from Windows OS.
1) Intel Chipset
2) FNIC ( HBA )
3) ENIC ( Network )
Currently, there is no one-click option to install necessary drivers based on server model. The following link helps you to navigate the ISO folder
http://www.cisco.com/en/US/docs/unified_computing/ucs/os-install-guides/windows/BSERIES-WINDOWS_appendix_0100.html
If you have many such installations to do, then you might want to create custom W2K8 image with necessary drivers built into it.
2) VLAN tagging
I assume you have single vNIC that allows 3 VLANs and want the OS to tag the traffic. I do not see VLAN tagging in ENIC driver properties. I will find more information on it.
If not, you can create three nics and UCS vNIC will tag the traffic as defined in the service profile.
3) HBA failover is handled by Multipath failover driver in OS( MPIO ) . Depending upon the storage array, you can install appropriate MPIO driver.
HTH
Padma

Z68A-GD80 (G3) - Win7 x64 clean install - which drivers as minimum?

hi guys, have just bought this board and would like to do a clean install. have checked the driver website (http://www.msi.com/product/mb/Z68A-GD80--G3-.html#/?div=Driver&os=Win7%2064) and wanted to check a) if there is any particular order I should be installing these drivers in (from the old days i remember this to be chipset drivers first, restart, then anything else - still correct or irrelevant now?) and b) which ones are indispensable? please see my comments below, would be grateful for input.
Intel Management Engine Driver for P67/H67
do i still need this if it's a z68 board?
Intel SandyBridge Chipset Driver
guess i'll have to install - using i7-2600k processor
Renesas USB3.0 Drivers
guess i'll have to install
Intel TPM Device Driver
heard this is security related - do i really need if disabled in bios?
Realtek PCI-E Ethernet Drivers
guess i'll have to install
Realtek High Definition Audio Driver
guess i'll have to install
Intel Rapid Storage Technology Floppy Driver (F6)
needed if i want to install win7 on SSD in ahci mode (but not raid) - correct?
Intel Rapid Storage Technology Driver
needed
Lucid Virtu Driver
have a separate graphics card - do i really need if disabled in bios?
Intel SandyBridge VGA Driver
have a separate graphics card - do i really need if disabled in bios?

Intel Management Engine Driver for P67/H67
do i still need this if it's a z68 board? This is a must have
Intel SandyBridge Chipset Driver
guess i'll have to install - using i7-2600k processor This is a must have
Renesas USB3.0 Drivers
guess i'll have to install This is a must have
Intel TPM Device Driver
heard this is security related - do i really need if disabled in bios? Don't need unless planning on using this device someday
Realtek PCI-E Ethernet Drivers
guess i'll have to install This is a must have
Realtek High Definition Audio Driver
guess i'll have to install Optional. Depends if using the onboard sound or an add-in sound card
Intel Rapid Storage Technology Floppy Driver (F6)
needed if i want to install win7 on SSD in ahci mode (but not raid) - correct? Not this one. Use the other one below
Intel Rapid Storage Technology Driver
needed Yes. Use this one
Not needed Lucid Virtu Driverhave a separate graphics card - do i really need if disabled in bios? Not needed
Intel SandyBridge VGA Driver
have a separate graphics card - do i really need if disabled in bios? Not needed

P55-GD65 problem safe mode and STORAGE drivers Win8

In windwos 7 everything worked fine. In Win 8.0 I can't enter SAFE MODE, just black screen, and NumLock is flashing every 3 seconds (from on to off and back to on). Even I press Caps lock, after 3 seconds it turned off and Num is ON again (and again loop just with NumLock).
Second problem is wrong displayed disk drive names in DEVICE MANAGER as seen on image down
Is that maybe a problem with this driver, so SAFE MODE is also NOT working?
Procesor is i7-860
GPU is 560TI MSI OC
8GB RAM
latest BIOS
SSD kingston KC 300
WD 640
Seagate
Samsung HD502
In Normal MODE Windows is working fine

Thanks for replies. I finally managed to fix "WRONG NAMES" with latest INTEL Rapid Storage drivers, so disk names are now fine.
Still, problem is entering SAFE MODE.
I try same copy of Windows 8 on OLDER Motherboard (mainboard) Asus p35 chipset and it is working fine (also SAFE MODE). Everything was working "out of box", no need for any driver to be installed.
So, my motherboard (p55) 3-4years old with Intel i7 is for retirement????
Why not build drivers for Win8, like some smaller brands do?

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

Unable to install XP drivers for Deskjet 3650 on Windows 7

I have a HP Deskjet 3650 that is connected via USB to my main computer running Windows 7. I can print without problems I am having problems sharing this printer with 2 other computers running Windows XP. I have downloaded the drivers for XP and extracted them onto the Windows 7 computer.
On the properties of the HP Deskjet 3600 Series printer, I have clicked on the Sharing tab.
Share this Printer and Render print jobs on client computers are both checked.
When I click on Additional Drivers, only X64 is checked and says yes under installed.
The other two options (Itanium and x86) are both unchecked and say no under installed.
I tried checking x86 and clicking OK. I'm then prompted to install print drivers and Browse to where the print drivers are located. I browse to the 3600/enu/drivers/win2k_xp folder and see hpf3600k.inf When I click Open, and select OK, I get a Selected Printer Driver Not Found Error which says The specified location does not contain the driver hp deskjet 3600 series (LIDIL) for the requested processor architecture.
On one of the XP machines, I have installed the printer software and am only able to print if I physically plug the printer into it.
On the other XP machine, I have not installed the printer software but I have download and extracted the drivers. When I click on the Add Printer Wizard and select the printer on the network, it tells me that I am about to connect to a printer on the Windows 7 computer and says that it will automatically install a print driver on my machine. I click Yes to allow it to continue and it tells me that the server for the hp deskjet 3600 printer does not have the correct printer driver installed and that I can click OK to search for the proper driver. I click OK and browse to the folder that I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a Install Driver Error window that says Windows cannot locate a suitable printer driver. Contact your administrator for help locating and installing a suitable driver.
So, it appears to me that the driver that I am downloading from the hp site for Windows XP is not the appropriate driver, am I wrong here?
How can I get this printer to work print on all 3 computers without having to move it from one to the other. The printer has to be physically connected to the Windows 7 machine as the other 2 are in the kids' rooms.
This question was solved.
View Solution.

Try the following: on the XP machine go to the Printers and Faxes folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK, then click on have disk and point at the directory where you have unzipped the XP driver.
On the XP machine you have already installed the driver do the following: go to the Printer and Faxes directory, right click on the Deskjet 3650, select Properties, Ports, Add port, Local port, New Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problem with installing the drivers from cd-rom CTREG

I have the following problems.
st.. this one is the most urgent.. the problem is I can't seem to install from a drivers cd.. the error I get is like CTREGSVR.. it says it cannot find differnt applications on dri've c... there is like a whole bunch and in the end you just keep clicking ok ok ok until it continues to install. the drivers intll fine but none of the appliations seem to work. the funny thing is with the message is that its looking for someing like c:\program files\creative\sbzs2\then differnt dll and stuff and it says it cannot be found..
the other problem I have is that once in a blue moon the mixer will not work and the only way to get it work is to pretty much go through the painful installin/re-intallation of the whole thing because nothing seems to work. It says the sounds blaster card could not be found...
anyways if you guys could just help me out with the st prob. that would be great.
thanks.

Hi.. someone help me out please.. this is the screen I always get
click on the link http://home.comcast.net/~alphaext/problem.jpg

MSI 785GM-E51 can't install audio drivers

Hey, I would be grateful if you could help me with this problem.
When I try to install the audio drivers of this mobo(785GM-E51), Windows 7 can't find them. It offers me another set of drivers - that of VIA's, but it should be Realtek's. Normally it wouldn't be a problem, but I have a an issue with front panel microphone jack(it's not working), so I want to install the proper drivers. I tried disabling auto-installing option of Windows 7, and then install the drivers that MSI offers officially , but still the computer acts as if I didn't install anything.
EDIT: It seems that I have a different motherboard - in the document I have(about the parts of PC), it says that the computer has MSI 785GM-E51, but now that I checked the informationa about motherboard in the Windows itself, it appaars that ASrock M3A770DE is in the case. So I guess the fact that I can't install the MSI's drivers is because of different mobo. I have no idea how this could've happened.

>>Posting Guide<<
Why don't you open up a case and read the model? Is the computer secured with some sort of sticker that voids warranty if opened?

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

WDS 2008R2 install storage drivers?

Similar Messages

Maybe you are looking for