WDS 2012 driver filtering by model not working

Hello,,
I am trying to filter all the drivers and force them to install for a HP Elite 8300 USDT and it is not working at all. When I remove the filter all the drivers install except the USB3. What gives? Any ideas?
I am using Server 2012 R2, but I am still using Windows 7 boot, do I need to upgrade that to the server 2012 R2 boot.wim for full support?

Hi,
Run this command “wmic csproduct get name”,
make sure you typed the correct model name. And I found that remove model and keep only manufacture filter works with HP machines. Check the following thread:
WDS 2012 Driver Pools
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6a0b392f-a339-48f2-8e2f-6d5d11b3d554/wds-2012-driver-pools
Hope this helps.

Similar Messages

  • Windows Server 2012 - Printing using UNC path not working

    Hi,
    I have a problem printing using the printer's UNC path ("\\Server_Name\Printer_Hostname") to work with a web
    app hosted on IIS 8. With a windows forms application the UNC path is working fine and the app prints.
    With
    the web app I receive an error "The data area passed to a system call is tool small". 
    Also,
    in the event viewer under Applications and Services Logs -> Microsoft -> PrintService -> Operational, I receive the error "The print spooler failed to reopen an existing printer connection because it could not read the configuration information
    from the registry key S-1-5-82-1980832875-2702362896-1795126167-3622310632-1152289074\Printers\Connections. The print spooler could not open the registry key. This can occur if the registry key is corrupt or missing, or if the registry recently became unavailable."

    I have contacted IIS forum support.
    Please review the link: http://forums.iis.net/p/1213109/2079229.aspx?Re+Windows+Server+2012+Printing+using+UNC+path+not+working
    Their final response:
    Printing from ASP.NET using System.Drawing.Printing itself is a horrible approach, as this namespace was designed for Windows Forms only. The designers did not take everything about ASP.NET in mind, so any issue can happen. That can answer why the HP model
    works while the Samsung fails, as the HP one just "happens
    to work",
    http://msdn.microsoft.com/en-us/library/system.drawing.printing.printdocument.aspx
    Similarly, System.Printing was designed just for WPF.
    About which printing API to use in ASP.NET/IIS, there is no clear answer so far. Thus, your only resource is Microsoft support, who can perform further analysis (with their dedicate utilities and of course Windows source code) and might come across a solution
    to help you out. This is not a trivial scenario.

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • Ethernet driver for WXP is not working on Satellite A100

    Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
    In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

    Hi
    I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
    However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
    If you want you can download and install the Lan driver from the Intel page:
    http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
    There you will find the drivers for the Intel 8256x Ethernet Controllers
    Bye

  • [SOLVED] Laptop SATA drive on desktop computer not working

    Hey guys,
    My acer laptop crashed few days ago and I'm trying to recover the data off its SATA harddisk on my gf's desktop computer. I don't know why, but I get a lot of errors at startup.
    dmesg:
    Adding 2024180k swap on /dev/sda3. Priority:-1 extents:1 across:2024180k
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
    res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
    sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
    Descriptor sense data with sense descriptors (in hex):
    72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    00 00 00 00
    sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
    end_request: I/O error, dev sdb, sector 0
    __ratelimit: 6 callbacks suppressed
    Buffer I/O error on device sdb, logical block 0
    Buffer I/O error on device sdb, logical block 1
    Buffer I/O error on device sdb, logical block 2
    Buffer I/O error on device sdb, logical block 3
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    ata5: EH complete
    ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    ata5.00: BMDMA stat 0x25
    ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
    res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
    ata5.00: status: { DRDY ERR }
    ata5.00: error: { ABRT }
    ata5.00: configured for UDMA/133
    sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
    sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
    Descriptor sense data with sense descriptors (in hex):
    72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    00 00 00 00
    sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
    end_request: I/O error, dev sdb, sector 0
    Buffer I/O error on device sdb, logical block 0
    ata5: EH complete
    I get the following output with hdparm:
    $ sudo hdparm -I /dev/sdb
    /dev/sdb:
    ATA device, with non-removable media
    Model Number: WDC WD2500BEVS-22UST0
    Serial Number: WD-WXE507A05038
    Firmware Revision: 01.01A01
    Standards:
    Supported: 8 7 6 5
    Likely used: 8
    Configuration:
    Logical max current
    cylinders 16383 16383
    heads 16 16
    sectors/track 63 63
    CHS current addressable sectors: 16514064
    LBA user addressable sectors: 268435455
    LBA48 user addressable sectors: 488397168
    Logical/Physical Sector size: 512 bytes
    device size with M = 1024*1024: 238475 MBytes
    device size with M = 1000*1000: 250059 MBytes (250 GB)
    cache/buffer size = 8192 KBytes
    Capabilities:
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, with device specific minimum
    R/W multiple sector transfer: Max = 16 Current = 1
    Advanced power management level: 128
    Recommended acoustic management value: 128, current value: 254
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
    Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
    Cycle time: no flow control=120ns IORDY flow control=120ns
    Commands/features:
    Enabled Supported:
    SMART feature set
    * Security Mode feature set
    * Power Management feature set
    * Write cache
    * Look-ahead
    * Host Protected Area feature set
    * WRITE_BUFFER command
    * READ_BUFFER command
    * NOP cmd
    * DOWNLOAD_MICROCODE
    * Advanced Power Management feature set
    SET_MAX security extension
    Automatic Acoustic Management feature set
    * 48-bit Address feature set
    * Device Configuration Overlay feature set
    * Mandatory FLUSH_CACHE
    * FLUSH_CACHE_EXT
    * SMART error logging
    * SMART self-test
    * General Purpose Logging feature set
    * WRITE_{DMA|MULTIPLE}_FUA_EXT
    * 64-bit World wide name
    * IDLE_IMMEDIATE with UNLOAD
    * Segmented DOWNLOAD_MICROCODE
    * Gen1 signaling speed (1.5Gb/s)
    * Native Command Queueing (NCQ)
    * Host-initiated interface power management
    * Phy event counters
    DMA Setup Auto-Activate optimization
    Device-initiated interface power management
    * Software settings preservation
    * SMART Command Transport (SCT) feature set
    * SCT Long Sector Access (AC1)
    * SCT LBA Segment Access (AC2)
    * SCT Error Recovery Control (AC3)
    * SCT Features Control (AC4)
    * SCT Data Tables (AC5)
    unknown 206[12] (vendor specific)
    unknown 206[13] (vendor specific)
    Security:
    Master password revision code = 65534
    supported
    enabled
    locked
    not frozen
    not expired: security count
    not supported: enhanced erase
    Security level high
    92min for SECURITY ERASE UNIT.
    Logical Unit WWN Device Identifier: 50014ee2559ab684
    NAA : 5
    IEEE OUI : 0014ee
    Unique ID : 2559ab684
    Checksum: correct
    Note that the drive is password protected. If I use 'hdparm --security-disable' with my known password, it fails with the following error:
    $ sudo hdparm --security-disable password /dev/sdb
    security_password="password"
    /dev/sdb:
    Issuing SECURITY_DISABLE command, password="password", user=master
    SECURITY_UNLOCK: Input/output error
    If I try this for few times, the security count expires.
    I see three problems that it could have:
    - my hdparm/system/whatever does not fully support the drive; maybe the password cannot be accepted?
    - maybe the password used by the laptop bios was filled with other characters after my typing: spaces?
    - not the password is the problem, but getting information from the drive: not supported by this system?
    I assume dmesg is the key, but I can't interpret it. I hope someone could tell me what should I verify/do further, I have no idea what to test anymore.
    Last edited by akephalos (2009-08-30 11:27:42)

    djszapi wrote:Is it a crypted system ? Can't you boot into it from livecd neither ? What did you do immediately before when this error started to occur ?
    No, it is not encrypted. Just as an information, it contains 4 partitions: sdb1=NTFS, sdb2=ext4, sdb3=swap, sdb4=ext4.
    This error did not occur when I was using it on my laptop, but I took the HDD out and mounted it in my girlfriend's computer, she has another Arch installed there, so I don't meed to boot from this disk, just to be able to read it. The password is a disk password - hardware probably, not for encrypted partitions. I could not disable the password because the original laptop doesn't start anymore, and the BIOS settings on this desktop computer does not support HDD password, but only System password.
    So, if the HDD had no passwod set, I could tell you if the reading problem comes from some incompatibility issues, but as for now, I can't tell where it comes from, because I need to deactivate its security with hdparm --security-disable first. But this actually looks to not work, or something.
    I'm thinking that the mianboard doesn't support this HDD directly connected, the things I'll do next week are:
    - buying an external HDD 2.5 rack
    - plug it in the USB
    - try again hdparm and anything required to make it read.
    If this fails, too, probably the only remaining solution is to find someone with an Acer laptop to put this HDD inside and backup my data, or at least deactivate the pass from the bios setings.
    Btw, I think this is something worth mentioning to warn the users in general: this Acer 5520G was of very poor quality, things began to crack right after the one year guarantee expired, beginning with the DVD-writer.

  • Keithley 2400 driver for Labview 8 not working

    I searched the boards and found this driver for a Keithley 2400 that should run with Labview 8.  I have Labview 8.6.
    http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...
    I put the driver folder in the proper location and the vi's are appearing in the selection menu as expected.  I have my Keithley 2400 connected to a serial port on COM1.  When I simply try to run the initialization VI it doesn't work.  I know it's communicating in some form, because my Keithley goes into remote mode and the initialization driver is able to properly read what the model of the Keithley is.  When it gets to the VISA read vi it is timing out, but still outputs the correct model identification.  I don't understand why it's timing out and not working.  
    Is there something else I should've installed?  The driver readme says the only additional software required is NI-VISA 3.2, however I have version 4.4, so I should be fine.  I just don't understand why it's "sort of" working.  Any help would be greatly appreciated. 
    Solved!
    Go to Solution.

    It doesn't sound like it. You are using serial and that requires nothing beyond VISA - plus simple commands are working. The fact that the drivers can send and receive the SCPI identification command tells me that you are communicating with the instrument. (That is what causes the instrument to tell you what kind of device it is.) The thing to remember about drivers you get from vendors is that they can be very buggy. Often times they were written by someone who doesn't know LV very well, or were perhaps donated to them by one of their customers. I always view vendor-supplied drivers as simply a starting place for creating really usable ones.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • SCVMM 2012, Conntect via conosle does not work when logged in with specified credentials

    Hi all
    I have a problem with the SCVMM 2012 console. When I start the console I select the "Specify credentials" option and then I enter my admin credentials. Afterward the console opens
    and everything works except the "Connect via Console" function.
    When I try to connect to a VM I get the following message:
    Virtual Machine Manager lost the connection to the virtual machine for one of the following reasons: Another connection was established to the console of this machine. The virtual machine has been shut down or put into the saved state. The user credentials
    provided do not have the necessary privilege to connect (0x0003, 0x0300)
    It seems that the Virtual Machine Viewer runs not under the admin credentials which I enter at the beginning and therefore the console cannot connect.
    Has someone the same issue ? Is it by design that the console connection does not work with specified credentials or is a sort of a bug or error ?
    Thx
    J0fe

    Being new to SCVMM, I've just come across this issue myself, though I came to a different (not necessarily better, but good enough for me) resolution.
    I have a somewhat convoluted but not abnormal configuration where the SCVMM server lives in a separate untrusted forest to that which the Hyper-V Server hosts live.
    As people have noted in this and other threads, the VirtualMachineViewer.exe process launches in the same security context with which you logged onto your pc. While the VmmAdminUI.exe process also runs in the same security context,
    the network logon it issues makes use of the credentials provided at the SCVMM MMC's logon screen, which VirtualMachineViewer.exe does not.
    I elected to use Credential Manager to resolve this issue.
    In Credential Manager, I created a "Windows Credential" entry where the hostname matched the FQDN of the hostname that appears within SCVMM as the virtual host entry. Using an IP does not match if you've used an FQDN in the SCVMM
    registration, and vice versa. If you used an IP for the host in SCVMM, then you need to supply that IP as the hostname in Credential Manager, and likewise if you used a FQDN.
    This solution isn't perfect as it requires you to manage numerous Credential Manager entries (one per host), but that still appealed to me far more than one per guest. If I had a larger environment, I'd script the account configuration
    given it only needs to happen once per host, rather than on an ongoing basis of once per guest as some of the above approaches would require.
    I haven't tested the different combinations to verify the least permissions required. For the time being I've gone with the model of using a non-privileged domain user account (to avoid managing multiple identities and passwords)
    which I added to the local Administrators group of each Hyper-V Server host. This stuck me as being a sound enough compromise between rigid security and ease-of-administration (given the per host arrangement in Credential Manager).
    With the account correctly specified in Credential Manager, I'm able to move on past the 0x0003 error and successfully use the remote function.
    If I was to point out an upside to this, it would be that this approach would allow me to remote Hyper-V servers in untrusted forests (including workgroups), which is something I couldn't do if the VirtualMachineViewer.exe process
    did in fact use my SCVMM credentials alone. Ultimately, that's something you have to come to terms with yourself, though.
    Cheers,
    Lain
    Thanks a bunch Lain, this helped! I'd still consider this a bug, however, and not a workable solution for a large number of servers/admins... But for now this does the trick, thanks!

  • SCCM 2012 Primary Site Recovery - Packages not working

    I recently had to recover my Primary Site due to system crashes with blue screens on a daily basis. I was running ConfigMgr 2012 SP CU 3 and as part of the process I migrated from WS2008 R2 to WS2012 R2.
    After many hours of perusing the web, I found the solutions to deal with the common site recovery issues such as SSL certs, and the content validation due to an empty ContentLib folder. I also had the issue with the update source where it listed the old
    WSUS 3.2 server and the new one so the Site GUID was also updated.
    The issue I am currently experiencing is that packages new or old including software update packages are not working. When using the script by Peter VanWoulde it lists the Deployment State as Error. I have tried redistributing them, valdiating the content,
    removing distribution points, adding in new distribution points and even recreating some of the smaller packages to test but nothing is working.
    Application deployments are working without issues.
    This is the tail end of the WindowsUpdate.log file
    2013-11-20 22:03:27:281 1632 a84 COMAPI >>--  RESUMED  -- COMAPI: Search [ClientId = CcmExec]
    2013-11-20 22:03:28:098 1632 a84 COMAPI   - Updates found = 176
    2013-11-20 22:03:28:098 1632 a84 COMAPI ---------
    2013-11-20 22:03:28:098 1632 a84 COMAPI --  END  --  COMAPI: Search [ClientId = CcmExec]
    2013-11-20 22:03:28:098 1632 a84 COMAPI -------------
    2013-11-20 22:03:32:139 1020 980 Report CWERReporter finishing event handling. (00000000)
    This is the UpdatesDeployment.log file
    Assignment {FD1118D2-563C-44D4-99DB-0CBE29C5C01A} has total CI = 432 UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
    Deadline received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
    Detection job ({F5229872-7A7E-4692-B709-63989F708AF0}) started for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:14 AM 4572 (0x11DC)
    Progress received for assignment ({FD1118D2-563C-44D4-99DB-0CBE29C5C01A}) UpdatesDeploymentAgent 21/11/2013 8:31:26 AM 4572 (0x11DC)
    EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:50 AM 3588 (0x0E04)
    EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:51 AM 3588 (0x0E04)
    EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 3588 (0x0E04)
    EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0 UpdatesDeploymentAgent 21/11/2013 8:47:55 AM 2908 (0x0B5C)
    At this point I am running out of ideas of where to look.

    Hi Xin,
    Sorry for not responding earlier but I did recover the site using the guidelines in the following article Backup and Recovery in Configuration Manager,
    however there were a few issues. 
    I did not have a ContentLib backup so all the content had to be redistributed and validated before that worked. None of my packages new or old would work. I eventually found an article from a forum member who also initiated a Site Reset as part of their
    recovery process and had no issues.
    So it seems that any packages are still not working and i think I narrowed it down.
    For some reason even though my DP and MP are all set for HTTPS, it is trying to access the HTTP path for SMS_DP_SMSPKG$. I am using PKI certs so this is the correct path but it should be HTTPS.
    Excerpt from log.
    Retrying DoUpdateSourceListAll task SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    Product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} is installed for user  SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    Adding 2 local DPs and 0 remote DPs for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    Adding install source C:\Windows\ccmcache\5l\ to source list for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E} SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    UpdateURLWithTransportSettings(): OLD URL - http://xxxxx.com/sms_dp_smspkg$/p01000ae SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    UpdateURLWithTransportSettings(): HTTP requested but client settings prohibit it. SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    Failed source list update for product {16A45552-A143-4EE6-8CA4-8D95FB5EEB7E}, error 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    DoUpdateSourceListAll task failed, error code 87d00226 SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    Source list update task failed, will be retried after 3600 seconds SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)
    MSI update source list task finished successfully SrcUpdateMgr 09/12/2013 2:26:51 PM 3140 (0x0C44)

  • SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

    I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
    I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
    It is working correctly in the report manager.
    <Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
            <OverrideNames>
                <Name Language="en-US">TAB delimited</Name>
            </OverrideNames>
            <Configuration>
                <DeviceInfo>
                    <FieldDelimiter xml:space="preserve">&#9;</FieldDelimiter>
                    <Encoding>ASCII</Encoding>
                    <UseFormattedValues>False</UseFormattedValues>
                    <NoHeader>False</NoHeader>
                    <FileExtension>TXT</FileExtension>
                </DeviceInfo>
            </Configuration>
          </Extension>

    Hi Dave0323,
    According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
    In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
    update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
    file like below:
    The result looks like below:
    Reference:
    CSV Device Information Settings
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Installed new hard drive, mail re-install not working properly...

    Hi - I replaced the hard drive in my laptop. Before doing that, I backed up my mail folder and my mail preferences folder to a DVD. Now, after installing OSX on the new hard drive, I've copied the file / folder onto the new drive, but mail isn't working properly. It keeps giving me the "welcome" screen instead of just starting up. It wants me to put in my email addresses, etc. Seems like there's a switch somewhere in the OS that tells it this is the first time its been run. If I go through the process, it still doesn't get my preferences right.
    Anyone know what I'm doing wrong?
    The files / folders I'm copying are:
    - Home > Library > Mail
    - Home > Library > Preferences > com.apple.mail.plist
    thanks,
    dave

    Problem was not with mail but with Toast and the DVD I burned using it - arggh.

  • Radeon HD 8750m switchable graphics driver BY HP is not working on Windows 8.1

    Hello all,
    I have  laptop Envy 6-1200el.
    It's a good machin but I have always been annoyed by video drivers trouble.
    When I bought my PC last year it worked good when we had Windows 8, but the video drivers didn't work properly already there.
    The drivers made troubles when I tryed to start some 3D applications as Batman: Arkham Asylum. The problem was the HP video driver. That driver is made by Radeon HD drivers plus Intel HD 4000 series all together.
    To make the two video cards working together properly you cannot use intel driver installation first then the AMD catalyst installation utility, but you need a driver installation utility that installs the two video cards both, otherwise the switchable graphics will not work properly and 3D applications won't start.
    When I had Windows 8.1 update I had absolutely to find a new driver. I downloaded the automatic utility from AMD site and luckily it downloaded an updated driver that was including and installing together both the video cards properly. Since there my laptop started to work very good in everithing.
    Some days ago I had to format my PC and that good video driver got lost.
    I installed almost everithing including windows 8.1 update but I sadly discovered that on AMD site it was downloadable only the Radeon HD driver not including any more switchable graphics installation and Intel HD driver.
    I have now installed the video driver given by HP on the right laptop portal, but this driver IS SO BAD!!!
    HP says that it's an update driver working properly on Windows 8.1 but it's false!
    MY PC WITH THAT HP DRIVER IS MAKING MANY TROUBLES:
    - 3D GAMES ARE NOT STARTING OR NOT WORKING PROPERLY;
    - PASSING THE MOUSE ON THE NEW START BUTTON ON WINDOWS 8.1, THE BUTTON BECOMES BLACK!
    - HP UTILITY CENTER IS NOT OPENING;
    - HP SUPPORT ASSISTANT IS NOT WORKING PROPERLY;
    - THE SYNAPTICS MOUSE DRIVER DOESN'T WORK PROPERLY, THE DOUBLE TOUCH DOESN'T WORK ETC.;
    - iNTEL DRIVERS INCLUDED ON THAT HP PACKAGE ARE OLD;
    - SWITCHABLE GRAPHICS DOESN'T WORK GOOD AND IS NOT ABLE TO ADDRESS SOME 3D CHARGES TO THE RIGHT CARD.
    PLEASE HP RELEASE AN UPDATE! pLEASE MAKE A REAL COMPLETE DRIVER THAT IS REALLY ACTUAL AND IS REALLY WORKING ON WINDOWS 8.1 WITHOUT CONFLICTS, WITHOUT GRAPHICS ERRORS ETC.!!!
    THIS SITUATION IS UNACCETTABLE, SOLVE IT PLEASE!

    Hi Fotoji,
    I want to be honest, it's very disappointing for me to be treated like a child.
    You should know that most of the people you meet here in this forum are not n00bs and the causes you suggest to consider haveall already been excluded in every way you would try yourself too!
    The fact you say, that the issues are caused by a 'broken OS' are so disappointing and unbelievable!
    I work in IT field since I was 14yo and now I am a graduated 28 who knows very well how to handle a PC in a clean and smart way.
    Look, many of these issues was already 'on' when I bought and started my PC for the very FIRST TIME.
    The video drivers needed are auto-installing drivers containing intel and AMD video drivers both and installed together at the same time.
    The first day I had my PC the system was VIRGIN, I simply installed steam then ran 'Batman:Arkham Asylum' to make a try, it has never ran up, no matter if the OS is W8 or W8.1, no matter if the PC is new or used for 6 months, that driver has never worked good.
    I tryed many things, used HP recovery manager several times in order to make a clean OS new installation, but it always went like that.
    Recently I sent my computer to HP Italy fro an hardisk problem, replaced in warranty. The laptop came back CLEAN, perfect, with W8.1 and all the new recent drivers.
    The problem was the same, games did not run or ran badly, the start symbol was black, HP Utility Center didn't work.
    So tell me where's the magic when I unistall in a CLEAN AND CORRECT way those video drivers, why EVERITHING COMES TO WORK SO GOOD BACK????
    Some months ago I knew that those drivers where so bad so I tryed to download the original driver package from AMD site, hoping that they was including the intel video drivers both, and guess...IT WORKED!
    Those drivers was including the intel video drivers too during installation, then after a restart I had NO GRAPHICS ERROR, NO HP UTILITY CENTER FREEZE, ANY GAME OR 3D APPLICATION WORKED AT LEAST 2x FASTER AND NOT ANY COMPATIBILITY PROBLEM IN ANY STATE OR SITUATION.
    Unfortunately my laptop started to have maybe some motherboard power problems and my HDD passed away then HP took my pc and fixed it.
    When it came back it was perfect again, virgin, with all the update installed, with those bad HP drivers installed again, so with all those problems that I found since I bought it: graphics error, compatibility problems, some programs freeze, all WHITOUT TOUCHING ANYTHING!!!
    I knew that I would solve it just downloading the right drivers directly from AMD site but UNLUCKILY THE NEW CATALYST 14.4 DIDN'T INCLUDE THE INTEL VIDEO DRIVER ANY MORE.
    I had all those compatibility, stability and graphics problems always with a just-formatted computer with all the updates installed, a virgin untouched machine just formatted completely automatically using HP recovery manager or fixed by your engeneers!!!
    The only case everithing worked very good was when I used the original AMD's drivers, when these used to inclued the intel graphics drivers too during AUTO-INSTALLATION.
    I am replying now using a just-formatted machine automatically and perfectly just using HPRECOVERY MANAGER,and updated using WINDOWS UPDATE and HP SUPPORT CENTER self updater.
    So guess what???? When I uninstall in A CORRECT WAY your HP video drivers (doesn't matter if the new one or the oldest) everything works good back, and when I used original AMD drivers everything worked so good.
    It's so hard to do something wrong about it, the driver installation utility are IDIOT-PROOF, you cannot do anything during installation except for clicking the RESTART button.
    So AMD used to make perfect drivers and now not any more, sadly, every issue disappears without your driver installed, HP sent me a perfect virgin computer with the same issues.
    So please, don't tell me that AMD is able to make better software, don't tell me HP is not able to handle a recovery and sent me a pc with the same issues, don't tell me I probably made a bad use of my VIRGIN laptop after years spent on SGI workstations UNIX based.
    I know how to keep a pc clean, and I'm telling you something more: the new synaptics mousepad driver package you are giving from HP website and HP support center DOESN'T WORK GOOD TOO!!!
    Once you accept the auto update it starts with the self installation, but after the restart gess what?? The double toe gesture used to simulate the right click doesn't work any more!!!
    No matter if you try to change any option in the control panel, no matter if you have windows 8 or 8.1, just try to unistall that and reinstall the old synaptics mouse driver and, OH WOW MAGIC, IT WORKS GOOD BACK AGAIN!!!
    So now what?
    Are you thinking that HP engeneers who fixed my laptop wasn't able to re-install windows and drivers?
    The IT engineers working for HP are maybe also n00bs that can't handle a pc format and send me a BROKEN OS as you said?
    I am magically breaking my os system just clicking one time on clean automatic HP recovery button then click on the automatic update buttons twice????
    Perhaps AMD is able to make more stable end recent drivers than HP does???
    (considering that aven the last HP graphics drivers update is so bad because the intel side of the package is very old and you can recognize it just making a comparison with the new intel additional control panel!)
    I don't need to recover the system for the 4th time in a proper way (plus HP fix would be the 5th!), I know these silly things.
    I need to be taken seriously and not be treated like a grandmother who's not able to switch-on a smartphone!
    I would challenge anyone to operate on my computer and try to solve it using Teamviewer and HP's drivers!
    I think I've been quite hard nut hopefully clear, so please do something more than giving me a manual fro grannies.
    Thank you.

  • Stateful session Bean in Model not working

    I made a sample application very very simple, and the weblogic server cant find the @stateful annotation on the class. is it there another possibility? here i post the error i get:
    [Running application MyTest1 on Server Instance IntegratedWebLogicServer...]
    [09:48:51 PM] ---- Deployment started. ----
    [09:48:51 PM] Target platform is (Weblogic 10.3).
    [09:48:52 PM] Retrieving existing application information
    [09:48:52 PM] Running dependency analysis...
    [09:48:52 PM] Deploying 3 profiles...
    [09:48:53 PM] Wrote Web Application Module to /home/issanllo/.jdeveloper/system11.1.1.2.36.55.36/o.j2ee/drs/MyTest1/ViewWebApp.war
    [09:48:53 PM] Wrote EJB Module to /home/issanllo/.jdeveloper/system11.1.1.2.36.55.36/o.j2ee/drs/MyTest1/ModelEJB.jar
    [09:48:53 PM] Wrote Enterprise Application Module to /home/issanllo/.jdeveloper/system11.1.1.2.36.55.36/o.j2ee/drs/MyTest1
    [09:48:53 PM] Deploying Application...
    <03-jun-2010 21H48' CEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1275594533727' for task '2'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(ModelEJB.jar)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    No EJBs found in the ejb-jar file {0}. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation..'
    weblogic.application.ModuleException: Exception preparing module: EJBModule(ModelEJB.jar)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    No EJBs found in the ejb-jar file {0}. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation..
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.IOException: No EJBs found in the ejb-jar file {0}. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
         at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:219)
         at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
         at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1210)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:382)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         Truncated. see log file for complete stacktrace
    >
    <03-jun-2010 21H48' CEST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'MyTest1'.>
    <03-jun-2010 21H48' CEST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Exception preparing module: EJBModule(ModelEJB.jar)
    [EJB:011023]An error occurred while reading the deployment descriptor. The error was:
    No EJBs found in the ejb-jar file {0}. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation..
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:454)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)
         Truncated. see log file for complete stacktrace
    Caused By: java.io.IOException: No EJBs found in the ejb-jar file {0}. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
         at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:219)
         at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
         at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1210)
         at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:382)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
         Truncated. see log file for complete stacktrace
    >
    #### Cannot run application MyTest1 due to error deploying to IntegratedWebLogicServer.
    [09:48:54 PM] #### Deployment incomplete. ####
    [09:48:54 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    [Application MyTest1 stopped and undeployed from Server Instance IntegratedWebLogicServer]
    and the very simple class with a Local and Remote interfaces at Model project in jDeveloper 11g (11.1.1.3)
    package test.core;
    import java.util.ArrayList;
    import java.util.List;
    import javax.ejb.Local;
    import javax.ejb.Remote;
    import javax.ejb.Stateful;
    @Stateful(name = "ControlSessionBean", mappedName = "MyTest1-Model-ControlSessionBean")
    public class ControlSessionBean implements ControlSessionRemote,
    ControlSessionLocal
    private String username;
    private String password;
    public ControlSessionBean()
    public List simple()
    List <String> s = new ArrayList();
    s.add(username);
    s.add(password);
    return s;
    any suggestions why it is not working??
    sincerely
    Israel S Llorens

    not working... i tried to make the stateful session bean Control.. and is still not working the error i get now is this one:
    <04-jun-2010 16H29' CEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1275661769594' for task '9'. Error is: 'weblogic.application.ModuleException: Could not setup environment'
    weblogic.application.ModuleException: Could not setup environment
         at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1499)
         at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:442)
         at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.deployment.EnvironmentException: [J2EE:160200]Error resolving ejb-ref 'gecu.view.LoginBean/controlBean' from module 'GeCU_Web_view_root' of application 'GeCU_Web'. The ejb-ref does not have an ejb-link and the JNDI name of the target bean has not been specified. Attempts to automatically link the ejb-ref to its target bean failed because no EJBs in the application were found to implement the 'gecu.model.ControlSession' interface. Please link or map this ejb-ref to its target EJB and ensure the interfaces declared in the ejb-ref are correct.
         at weblogic.deployment.BaseEnvironmentBuilder.autowireEJBRef(BaseEnvironmentBuilder.java:427)
         at weblogic.deployment.EnvironmentBuilder.addEJBReferences(EnvironmentBuilder.java:502)
         at weblogic.servlet.internal.CompEnv.activate(CompEnv.java:157)
         at weblogic.servlet.internal.WebAppServletContext.activate(WebAppServletContext.java:3117)
         at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1497)
         Truncated. see log file for complete stacktrace
    >
    <04-jun-2010 16H29' CEST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 9 task for the application 'GeCU_Web'.>
    <04-jun-2010 16H29' CEST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'GeCU_Web'.>
    <04-jun-2010 16H29' CEST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
    weblogic.application.ModuleException: Could not setup environment
         at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1499)
         at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:442)
         at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
         at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:95)
         Truncated. see log file for complete stacktrace
    Caused By: weblogic.deployment.EnvironmentException: [J2EE:160200]Error resolving ejb-ref 'gecu.view.LoginBean/controlBean' from module 'GeCU_Web_view_root' of application 'GeCU_Web'. The ejb-ref does not have an ejb-link and the JNDI name of the target bean has not been specified. Attempts to automatically link the ejb-ref to its target bean failed because no EJBs in the application were found to implement the 'gecu.model.ControlSession' interface. Please link or map this ejb-ref to its target EJB and ensure the interfaces declared in the ejb-ref are correct.
         at weblogic.deployment.BaseEnvironmentBuilder.autowireEJBRef(BaseEnvironmentBuilder.java:427)
         at weblogic.deployment.EnvironmentBuilder.addEJBReferences(EnvironmentBuilder.java:502)
         at weblogic.servlet.internal.CompEnv.activate(CompEnv.java:157)
         at weblogic.servlet.internal.WebAppServletContext.activate(WebAppServletContext.java:3117)
         at weblogic.servlet.internal.WebAppModule.activateContexts(WebAppModule.java:1497)
         Truncated. see log file for complete stacktrace
    >
    [04:29:35 PM] #### Deployment incomplete. ####
    [04:29:35 PM] Remote deployment failed

  • Filters on CSWP not working when Scheduling Start Date sets Immediate Value

    In Sharepoint 2013, When users sets value of "Scheduling start date" to "Immediately", the filters does not work correctly.
    I have checked many forums where it is mentioned that If you set scheduling Start date to Immediately, internally the Scheduling Start Date is set to 01/01/1900.
    When i use query in content search webpart as publishing date is between "Scheduling Start Date" and "Scheduling End Date" so it fails. it  does not displays filtered data.
    Please provide some resolution for this issue.
    I have tried using calculated field wherein we can put formula to get value for Immediate value and then use it in Filter expression. but I need another approach related to "Scheduling Start Date" Column. i.e can we remove the Immediate radio button
    or can we restrict user to use specific date only?
    Thanks in Advance.

    This is a new one on me.
    It's a server program to interface with QuickTime and some other problematic services.
    If you use video or 3D in Photoshop Extended, you probably need it.
    Sounds like you are correct in that it has to do wtih Quicktime.  Do you have PS extended?

  • New Context for 'Problems' in Rule modeler not working

    Hi,
    I am using the Rule modeler to determine the Service team based on selected Categorization schema for Incidents - it's working fine. Now I want to implement the same for Problems
    I created a new Z Context (Master Request) to create a rule policy for Problems -> assigned rule policy to a ZServ.Mgr.Profile Unfortunately the rule policy is not working for problems. The new ZContext was copied from existing SERVICEREQUEST context which also copied all the services within.
    Am I missing something ? Please help.
    BR.
    P.S incidents have an action definition with method DISPATCH that determines service team - same has been assigned to Problems.

    Had to use 2 Dispatch methods to determine the service team.

  • Driver problem, Colour Sensor not working properly?

    Hey!
    My W530 came with windows 8 preinstalled. Unfortunately I got sick of it after 2 months of use and decided to install windows 7. After turning off safety boot in the bios menu, windows 7 worked pretty good. I'm only having a few issues at the moment.
    - Some hardware is missing its drivers. I installed most of the drivers (needed ones) as far as I know. But in the device manager, its showing me that software is missing.
    - X-rite colour sensor is not working. It worked in windows 8 and I absolutely love it. But when I try to make a new profile (calibrate), it gives me an error (not sure what the error is in english, so here goes google translate: error setting calibration-initialization) and three beeps.
    Some of my own thoughts are that, when I had windows 8, my screen showed up as 'Thinklad LCD' or something similair (in the screen resolution menu). Now it shows up as 'screen of portable computer' (this is obviously not the exact term it shows, its the standart name that windows shows for monitors and displays. hooray for google translate again). I was guessing that maybe I am missing a display driver (even though I could not find one myself). And since it shows 'ACPI' at the device manager at 'unknown device', I am guessing it has to do with a harddrive driver?
    I really tried my best spitting out the forum, and google. But I got no luck. I really hope someone here can help me (again).
    Thanks a lot!
    Image showing errors and what not. Its dutch, so if a translation is really needed, I'll try my best and translate most of the onscreen stuff:
    Link to picture (sorry for putting a picture here at first)
    EDIT:
    I found the error log of X-rite, so here it is:
    Misc.txt
    isAvailable(): Failed to get device - 5
    isAvailable(): Failed to get device - 5
    XRLaptopSDK --> XRCalibrationInit
    [za 17. aug 11:10:43 2013] Error Code [10]. Error setting Calibration init. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:36
    isAvailable(): Failed to get device - 5
    isAvailable(): Failed to get device - 5
    XRLaptopSDK --> XRCalibrationInit
    [za 17. aug 11:10:54 2013] Error Code [10]. Error setting Calibration init. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:36
    startPostCalibration --> Restoring DPST state
    XRLaptopSDK --> START start-PostCalibration
    XRLaptopSDK --> XRCalibrationLidTurnOnNotification
    [za 17. aug 11:11:04 2013] Error Code [6]. Error Turning on laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:196
    MeasuredPatchesLogger.txt
    Monitor Name: Algemeen PnP-beeldscherm
    Monitor Type: 4
    Serial Number:
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    I am sorry for the bump, but I reinstalled the x-rite software and got a different error this time:
    isAvailable(): Failed to get device - 5
    isAvailable(): Failed to get device - 5
    XRLaptopSDK --> XRCalibrationInit
    XRLaptopSDK --> XRCalibrationLidTurnOffNotification
    [di 20. aug 00:26:25 2013] Error Code [7]. Error Turning off laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:43
    isAvailable(): Failed to get device - 5
    isAvailable(): Failed to get device - 5
    XRLaptopSDK --> XRCalibrationInit
    XRLaptopSDK --> XRCalibrationLidTurnOffNotification
    [di 20. aug 00:26:32 2013] Error Code [7]. Error Turning off laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:43
    isAvailable(): Failed to get device - 5
    isAvailable(): Failed to get device - 5
    XRLaptopSDK --> XRCalibrationInit
    XRLaptopSDK --> XRCalibrationLidTurnOffNotification
    [di 20. aug 00:26:55 2013] Error Code [7]. Error Turning off laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:43

Maybe you are looking for

  • Unit of measure EA allows transactions in decimals ? Is EA indivisible?

    Unit of measure EA allows transactions in decimals ? Is EA indivisible? There are two scenarios. While creating a Bill of material - based on the configuration (see below) if you enter a quantity with decimals for a part number for which the Basic UO

  • Pages are not loading properly and can't perform simple functions like forwarding e-mail, whats wrong?

    When I sign into my Yahoo account the mail page doesn't load correctly and prompts me to turn off automatic updates. I can't send or forward any e-mails in the mail section. When I sign into Facebook I can't poke people back, look at mail friend requ

  • Creating the receiver file name dynamically

    Hi Friends Here I have a scenario IDOC to File, I am not using any mapping or creating any repository objects. My requirement is to pass the sender IDOC to receiver in an xml file format. While posting the file at receiver file directory I suppose to

  • Tips on making my iMac 7.1 run faster?

    I've tried cleaning (with Clean My Mac), moving files to external hard drive, not opening applictions on launch, etc. Still painfully slow... If I re-start it works faster for a while, then seriously slows down if I have more than 3 or 4 applications

  • The launching time of integration builder is extremely longer

    Dear XI experts I will tell you our story. When I execute Demo examples (Chapter 5.1.3 Executing and Testing – XI 3.0 Demo Examples Configuration) We got the error “STRING_BAD_REF dump when starting BSP application”, I found out the solution : SAP No