WDS 2012 - Stopped pushing Drivers after disabling a Driver Group

Hi Guys,
i really would appreciate your help on this:
I have a WDS 2012 server which was working fine and pushing drivers ok to windows 7 clients
I have disabled a driver group in order to apply the image on a different hardware and re-enabled after i have finished.
WDS stopped pushing any drivers
Troubleshooting:
Restarted WDS
Deleted the Group and created a new one with a different name, added displaydrivers
Restarted the server just in case but no luck
I do not have any filters on
Could you please help
Thanks
Alex

Hi MJM,
Did you get any event error? Please enable the WDS log, then execute a deploy action, then post the error.
The related KB:
How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
http://support.microsoft.com/kb/936625
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Missing drivers after upgrade Hard drive of X31(2672)

Hi,
After upgrade my X31 hard drive(the old one is dying), my USB is not working anymore. Through PC doctor, I found both the drivers of Network Controller(code 28) and Universal Serial Bus controllers at USB/RootHUB (code 39)are missing. I don't have recovery CD. Do you know how to fix it?!
Thanks,
Yang

Install ThinkVantage System Update and let it pull down the drivers and apps for you machine and OS. Install the Win 7 version.
ThinkVantage System Update
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
B-rock

Yahoo email stopped pushing after ios6.0.1 update, has anyone else had this problem? Iphone5

Yahoo email stopped pushing the day the ios6.0.1 update came out. Managed to get it back Saturday night, but stopped again last night. I have tried every trick I found in the forums short of restoring my phone, but don't really want to do that if I can help it, since Yahoo push has been sporadic in the past with all my iPhones & don't know if it will even help. Just curious if anyone else has experienced this as well. Thank you.

I haven't tried anything as of yet. I just had this happen like an hour ago n haven't had time to troubleshoot. I did however do a soft reset but haven't written another email to see if its still going on. Im at work n dont have much time until morning.

ICal stopped pushing messages to Exchange server after upgrade to 10.6.4

Hi
I upgraded to 10.6.4 this morning and since then my iCal exchange calender has stopped pushing messages to the server. If I change an appointment on my iPhone or iPad it appears on my Laptop, but if I add/change an appointment on my laptop it doesn't appear on my iPhone, iPad or the web based exchange.
I've tried deleting my account and reinstalling.
Any other suggestions?
Many thanks
David

I have had the exact same issue.... It seems 10.6.4 broke something. Email using the same exchange account info continues to work without any problems.
My iPhone 3G has no problem using its Exchange calendar functions as usual.
-Tom

Windows Deployment Services 2012 - Driver Group filter by Model value not working - Drivers are not installed!

Hi,
I'm using Windows Deployment Services 2012 to deploy Windows 7 Pro x64 driverless images to different hardware models (drivers are injected using WDS). I already have organized the drivers in driver groups per
hardware model. I'm experiencing driver conflicts so I decided to start using driver group filters to make sure that the driver groups are available only available for the corresponding hardware model.
To get the correct values for the filters i have used the following method: (as described in this article: http:// technet.microsoft.com/en-us/library/dd759191.aspx)
so I checked msinfo32.exe
(System Manufacturer: Dell Inc. System Model: OptiPlex 790)
and set these values in the driver group filter:
Then fired up WDS using PXE booting on my OptiPlex but when finished: No drivers are installed! I investigated further and found on forums to use the following commands (which return the same values btw):
wmic bios get manufacturer
(returns: Dell Inc.)
wmic computersystem get manufacturer
(returns: Dell Inc.)
wmic computersystem get model
(returns: OptiPlex 790)
Values are the same so no problem there.
Then I checked the output of the following commands:
wmic bios get model (returned: error, invalid query)
wmic bios get /all (returned: all kind of information but no model value)
When I remove the value "OptiPlex 790" from the filter list the drivers are installed correctly. So this has to be some problem with the Model value.
Could someone please help me?
As a workaround I now disable all the driver groups exept the one that I need for the hardware. But as more new hardware models are added this is a lot of work to do everytime.
Extra info:
I'm using a WINPE 4.0 image (windows 7 media boot.wim file). 6.1.7.601
Windows Server version: Windows Server 2012 - version 6.2 (Build 9200) - All Windows updates are installed
Windows Deployment Services version 6.2.9200.16384
Having this problem on multiple systems
Questions:
- Does WDS/WinPE uses only the Bios values for determining system info? (then this problem could be with Dell in this example, because no model value is available)
- Is this the correct way to set up driver group filters? (then this is a problem with MS. Does anyone have solution??)
Thank you for your answers & help!

Hi Microsoft,
I still have no answer to my Questions.
Thank you for your answers & help!

Catalyst Control Center stopped working properly after widows update

When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7). Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7). Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

My IPhone stopped working right after I did the most current update, yesterday. The screen has a picture of the usb cord, pointing towards the ITunes logo. I cannot use the phone at all. I have tried turning it off and on.ITunes won't recognize device

Hi there,
Can someone please help. My IPhoneS stopped working right after I did the latest update which was yesterday. Now, the phone does not work at all. When turned on, the screen shows a picture of USB cable pointing to the ITunes logo. I have tried just about everything, and cannot get it working. It's like it is frozon. My ITunes does not recognize my device. Cannot dial out either. I desperately need to get it working. Can someone please help me.
Thanking you in advance for your help. :-)

The update did not do anything.
AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

Issues After Disabling IPv6 on Your NIC on SBS 2008

If you uncheck the IPv6 protocol from your network interface card on your Windows SBS 2008 server you may see the following issues after a reboot:
Microsoft Exchange services fail to start
Server hangs at “Applying Computer Settings…” (can eventually logon after 30 – 60 minutes)
Network icons show as offline
Some or all of the following events
Application Log Events
Source: MSExchange ADAccess
Event ID: 2114
Task Category: Topology
Level: Error
Description:
Process MAD.EXE (PID=2088). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185,
“Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
Source: MSExchange ADAccess
Event ID: 2601
Task Category: General
Level: Warning
Description:
Process MSEXCHANGEADTOPOLOGY (PID=952). When initializing a remote procedure call (RPC) to the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the SID for account <WKGUID=DC1301662F547445B9C490A52961F8FC,CN=Microsoft Exchange,CN=Services,CN=Configuration,…>
– Error code=80040a01.
The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.
Source: MSExchange ADAccess
Event ID: 2102
Task Category: Topology
Level: Error
Description:
Process MAD.EXE (PID=2088). All Domain Controller Servers in use are not responding: SBS.sbs2008.local
Source: MSExchange ADAccess
Event ID: 2105
Task Category: Topology
Level: Warning
Description:
Process MAD.EXE (PID=2088). Exchange Active Directory Provider failed to obtain DNS records for domain sbs2008.local. DNS Priority and Weight for the Domain Controllers in this domain will be set to the default values 0 (priority) and 100 (weight).
Source: MSExchange ADAccess
Event ID: 2114
Task Category: Topology
Level: Error
Description:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=952). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
Base article 218185, “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
Source: MSExchangeFBPublish
Event ID: 8197
Task Category: General
Level: Error
Description:
Error initializing session for virtual machine SBS. The error number is 0x80040a01. Make sure Microsoft Exchange Store is running. Also, make sure that there is a valid public folder database on the Exchange server.
Source: MSExchangeTransportLogSearch
Event ID: 7005
Task Category: General
Level: Error
Description:
Microsoft Exchange couldn’t read the configuration from the Active Directory directory service because of error: Failed to load config due to exception: Microsoft.Exchange.Data.Directory.NoSuitableServerFoundException: The Exchange Topology service on server
localhost did not return a suitable domain controller.
System Log Events
Source: Service Control Manager
Event ID: 7044
Task Category: None
Level: Warning
Description:
The following service is taking more than 16 minutes to start and may have stopped responding: Microsoft Exchange System Attendant
Source: Service Control Manager
Event ID: 7022
Task Category: None
Level: Error
Description:
The Microsoft Exchange Transport service hung on starting.
Source: Service Control Manager
Event ID: 7024
Task Category: None
Level: Error
Description:
The Microsoft Exchange Information Store service terminated with service-specific error 0 (0×0).

Hi,
Based on your description, it seems to be the same as the following blog.
Issues
After Disabling IPv6 on Your NIC on SBS 2008
Did you mean that encounter the same issue? If so, there is a resolution in that blog, please check if can
help you solve the issue.
If any other issue exists or any update, please don’t hesitate to let me know and provide more details. It
will help me understand clearly.
Best regards,
Justin Gu

Sql server service wont start after disabling TLS 1.0 and SSL 3.0 on windows

We have been hardening our servers for some time now and recently we disabled SSL 3.0 because of the poodle attack. When I did this on one of our test servers SQL Server failed to start up after the restart.
I have been able to reproduce this on Windows Server 2012 and Windows 7 by disabling TLS 1.0 and SSL 3.0 through the registry. I am using SQL Server 2012 on the server machine. On my windows 7 machine sql server 2012 and sql server 2005 will not start with
those disabled.
These are the event log errors I get:
Application Logs:
(28/10/2014 8:38:54 AM) SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
(28/10/2014 8:38:54 AM) Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
(28/10/2014 8:38:54 AM) TDSSNIClient initialization failed with error 0x80090331, status code 0x1.
(28/10/2014 8:38:54 AM) TDSSNIClient initialization failed with error 0x80090331, status code 0x80.
System Logs:
(28/10/2014 8:38:54 AM) The SQL Server (MSSQLSERVER) service terminated with service-specific error %%-2146893007.
(28/10/2014 8:38:54 AM) A fatal error occurred while creating an SSL server credential. The internal error state is 10013.
Done anyone know have we can keep SSL 3.0 and TLS 1.0 disabled and get SQLServer server to start?

Hi Don,
I already have TLS 1.0 Disabled to prevent the BEAST exploit. So the values I have for:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
1.0\Server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
1.0\Client
Both have enabled set to ("Enabled"=dword:00000000).
If change both of these back to ("Enabled"=dword:00000001)
to enable TLS 1.0, and restart then SQLServer is able to start again. But we are now vulnerable to the BEAST attack once again.
If I keep server enabled and disable the client or vice versa and restart. Then SQLServer starts but I
am unable to connect to it. When I check the Event logs I get the same errors as my original past.
With your last post, do you mean to backup SCHANNEL and delete it so it gets recreated? If that is the case it will probably work because if I re enable SSL 3.0 or TLS 1.0 from here it fix's the issue, but I then I won't have the exploits patched and
we need this for some of our customers.
This is my SCHANNEL Export:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:00000000

AMD GPU fan runs constantly even after disabling DGPU

I have a HP-Pavilion dv6 6121TX, with AMD 6770m gpu.
The fan of the gpu runs constantly even after disabling it using the following command
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
the output for "cat /sys/kernel/debug/vgaswitcheroo/switch" is as follows
0:DIS: :Off:0000:01:00.0
1:IGD:+:Pwr:0000:00:02.0
It shows that the DGPU is off and yet the fan for the same runs continuously at full speed.
Would be really grateful for any suggestions.
Thank you.

You might also try a different battery if you have access to one. Unfortunately, many of the replacement batteries being shipped by Apple are defective. They don't fit properly into the battery bay. I suspect that if the quality control is this poor, then it seems likely that other problems will arrise as well. Check carefully that the battery itself is not overheating. Another possibility which also happened to me is that after installing the last upgrade to the operating system, one or more of the third party widgets became problematic, causing the same problem you describe. After removing all third party widgets, the problem stopped. Good Luck

TS1470 Since very recently whenever I connect to Whatsapp and a few other Apps I get the following message " CONNECT TO I TUNES TO USE PUSH NOTIFICATIONS" After connecting to I Tunes I am unable to find any solution there

Since recently whenever whenever I check any application especially WhatsApp, before it opens I get the following notification:
: CONNECT TO I TUNES TO USE PUSH NOTIFICATIONS: After connecting to I Tunes I find no solution there?

Dropbox is virtually disabled on my phone now because of these messages, and most other apps are now difficult to use. I have rebooted the phone several times, reset network settings and restored factory settings (and had to make all my adjustments again) but nothing worked. My phone is now almost totally useless.

CONTAINS clause still works after disabling fulltext index on a table

I disabled the fulltext index on a table using the below query:
USE <dbname>;
GO
ALTER FULLTEXT INDEX ON <table_name> DISABLE
Per BOL, "The table will not support full-text queries while the index is disabled.", I would expect the CONTAINS clause to stop working but I can still return rows from the <table_name> as before.
SELECT top 10 *
FROM [dbo].[table_name]
WHERE CONTAINS(<column>, N'test');
The above returns 10 rows before and after disabling the index.
Do i need to do something else?
I even tried DENY permissions:
DENY CONTROL, TAKE OWNERSHIP, ALTER, REFERENCES, VIEW DEFINITION ON FULLTEXT CATALOG::<catalog_name>
TO <some_database_roles including public>
Please help.
Thanks
Thanks

Charles,
Do you have any DDL Triggers on your server that might affect whether the full text index could be disabled?
Any Policies that might likewise affect your results?
RLF

Smpatch analyze gives different result after disabling Sun Connection Host

Hi all,
after disabling the Sun Connection Hosted functionality due to the EOL announcement I get a smaller number of patches from 'smpatch analyze' for a brand new jumpstarted server (227 patches before vs. 106 patches after).
Trying e.g. a individual analysis for 126651-01 (Synopsis: SunOS 5.10: tar patch) results in
Error: One or more of the updates specified do not have entitlement permissions.
BTW: I ran the analysis for patch 126651-01 before without any problem.
The entitlement file
/var/sadm/spool/cache/entitlement/https%3A%2F%2Fgetupdates1.sun.com%2F%2Fentitlement_client
looks like
----START-ENTITLEMENT-TOKENS----
Solaris10Security
SolarisSecurityUpdates
SolarisDataIntegrityUpdates
SolarisHardwareUpdates
SolarisUtilityUpdates
Public
-----END-ENTITLEMENT-TOKENS-----
And we do have a service plan!
Any ideas?
Kind Regards
Marco

Hi Shen,
thanks for your reply. I tried this procedure from your thread
Try re-registering the patch server after running these commands:
# cacaoadm stop
# cacaoadm status
# rm -r /var/sadm/spool/cache/*
# /usr/lib/cc-ccr/bin/eraseCCRRepository
# rm /var/scn/persistence/SCN*
# cacaoadm start
# /usr/sbin/sconadm register -a -r registrationprofile.properties
But unfortunately the problem persists. The entitlement file looks the same as before. The registrationprofile.properties files looks like
userName=<username>
password=<pw>
hostName=<hostname>
subscriptionKey=<key>
portalEnabled=false
proxyHostName=
proxyPort=
proxyUserName=
proxyPassword=
We use a direct connection to sun's update server without a SunUC proxy. (I disabled the proxy, because I had some trouble with it in the past).
'smpatch get' gives
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""

Stopping a recording after each track

I have an odd request...Is there any way to stop a recording after each track? Such that there are three tracks on a recording, after each track I would like the CD to stop. After it has stopped, I would like to be able to push play and move to the next track. That is, I put the CD in the player, push play, the CD plays track 1, and then stops; I push play again, and the CD begins playing track 2, and so on. I have Logic Pro and iTunes, which I have used to create the tracks and compile onto a CD. Using these can I create a CD with these parameters? Any advice would be helpful, and thanks in advance for your time.

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

WDS 2012 - Stopped pushing Drivers after disabling a Driver Group

Similar Messages

Maybe you are looking for