WDS? Connect 'UFO' Airport EX to Linksys WAG354G WiFi Internet connection

Is this possible? My scenario is thus: I have a Linksys WAG354G connected to the Internet through ADSL (United Kingdom). This router is connected to the phone downstairs and works fine, sharing its internet connection with my Macs downstairs (wireless) without a hitch.
I have been given a UFO shaped Airport Extreme and I'm trying to use it in my office upstairs. I'd like it to use the Linksys's Internet connection, wirelessly, so that I can connect a PC to the Internet. I'm guessing this is WDS?
Can this be done and how? I've been trying to suss it out for the last couple of days and am going off my head working out how to do it!!!

No this can not be done.
The Airport Extreme will act as a wireless-to-wired bridge only when used in association with a base station on the following list:
- an Airport Express
- another Airport Extreme Base Station
- a Linksys WRT54G or WRT54GS
- a Belkin Belkin F5D7230-4 and F5D7231
- one specific model from SMC
- one specific model from Buffalo
- BT HomeHub 2091 (?)
For wireless routers not on this short list - not possible.
In particular, it will not work with any WiFi routers from D-Link or Netgear.

Similar Messages

Airport Time Capsule causing Dropping Wifi/Internet on other computers on my network

I have 2 gen time capsule thats causing all my other computers in house to loose wifi.
Its running the latest firmware.
At the moment i leave it unpluged whitch seems to work,but really would love to have it up and running.
any advice would be greatly appreciated.

Do a factory reset..
When you do the setup again, change all the names in the TC to short, 2-20 characters with no spaces and pure alphanumeric.
That does mean setting up wireless again on each device but that is one of the things that can help.
Make sure you use WPA2 Personal security with password of 8-20 characters.. more if you are paranoid type.
Again mix of upper and lower case and numbers but stick to pure alphanumeric.
If the clients still do the same thing, change the wireless to fixed channels.
Please also test by using a computer via ethenret to see that the TC is still actually working and it is only wireless that is affected.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.

Connecting to Airport Express via Linksys Wireless-G adapter

I am trying to use a linksys compact adapter (WUSB600N) to connect a Windows XP PC to my Airport Express- The linksys monitor CAN detect the Airport Express, but "cannot associate with the access point" for a few seconds, then "can associate... but cannot find the Internet"
I haven't had any problems connecting my MBP and a Vista notebook to my AX, just this PC using this adapter.
Can anyone help me?

To Connect your Computer to the Wireless Network you need to change some settings on your Router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...

Can't connect to Airport Express using Linksys WRE54g?

I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
Here's my setup.
I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
Now I bring macbook to living room. AE1 works!
What I intend to setup is,
1. WAG200G, macbook and external HDD in my studies.
2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
3. Control the playlist using iPhone Remote and listen music in living room.
Question:
1. Did iTunes connect directly to Airport Express without going thru network router?
2. How should I setup Airport Express in this case?
Appreciate anyone who can help me on this. Thank you.

pss.
actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

Creating a WDS with an Airport extreme

I wanted to see if it was possible to create a WDS with an Airport Extreme as the base station and a regular Airport (snow version) as the remote. If it is possible and I hardwire into the ethernet port on the remote station will that work?
Thanks for any help!

Yes, a second Extreme Base Station or Airport Express would do the job.
The disadvantage of using an Airport Extreme Base Station or Airport Express in this manner is that it cuts your overall wireless network speed in half. You might find that to be a completely acceptable, and un-noticeable, price to pay. However, there are other ways to connect non-wireless devices to a wireless network - many other companies sell wireless-to-ethernet adapters that will function on any manufacturer's wireless network.

WDS networking issue - Airport Extreme (802.11n) and remote Airport Express

*Background Info:*
Airport Extreme 802.11n (Fast Ethernet)
Version: 7.2.1
Wireless Mode: Participate in a WDS network (set as main)
Network Name: @Home
Wireless Security: WPA/WPA2 Personal
Channel: 1
Airport Express
Version: 6.3
Wireless Mode: Participate in a WDS network (set as remote)
Network Name: @Home
Wireless Security: WPA/WPA2 Personal
Channel: 1
Radio Mode: 802.11b/g compatible
Connect Using: AirPort (WDS)
Connection Sharing: Off (Bridge Mode)
Issue
Please help as I'm having issues with my WDS network. I've setup using both the wizard and manual and also hard reset on both units to setup again but cannot get them both to communicate to one another. Both units are showing green LED under their configuration. For my last attempt, I've tried adding the Airport ID (MAC) of the Airport Express to the Access Control and also DHCP Reservations on the Airport Extreme but still no luck.
The Airport Express (setup as remote) does not even show up in the Airport Extreme's Summary as Wireless Clients. In the WDS tab, the Airport Extreme is set up as WDS main, Allow wireless clients box checked and WDS Remotes has the Airport Express' AirPort ID in the list. On the Airport Express, WDS is set up as remote, with Allow wireless client box checked and the Airport ID of the Airport Express in the WDS Main.
I can connect clients to both units. Both units are configured using the same Network Name and have the same WPA/WPA2 security key. The Airport Extreme (main) however is connected to my broadband so any devices or clients connected to it are able to get outside. Connected devices or clients are assigned IP address via DHCP with IP 10.0.x.x. If wifi devices or clients connect to the Airport Express (remote) they are assigned a completely different IP addresses 169.254.x.x, they are not able to browse the internet or talk to other clients connected on the 10.0.1.x network. The Internet Connection configuration on the Airport Express (remote) is Connect Using Airport (WDS) and Using DHCP. I've even tried manually and entered the IP address 10.0.1.199 that I had assigned to the Airport Express from the Airport Extreme and Router Address as IP of Airport Extreme (10.0.1.1).
I think I've tried everything but I'm still having this problem. The remote Airport Express is not extending my existing Airport Extreme network. Any ideas???

Christopher,
This may or may not be helpful, or it may be something you've already tried or are aware of so I apologize if that's the case.
I have been researching ways to set up the Dual Band Network supported by the AEBS and came across your post. I've got an AEBS and (2) AirPort Express set-up currently (AEBS is main and the Express are participating in the WDS as remotes) and I'm trying to configure one of the Express to utilize a 802.11b/g compatible network while the AEBS runs a 5Ghz 802.11n Only network.
AAR, since the AirPort Express are 2.4Ghz 802.11b/g ONLY (no support for 802.11n), you have to be sure to set-up your AEBS first and select "802.11n (802.11b/g compatible)" in the Radio Mode drop-down on the AEBS before you attempt to connect an AirPort Express. The AEBS should be set-up as your "WDS main" and the Express should be set-up as a "WDS remote" for the network you established when you set-up the AEBS.
Bottom line here is the Express won't be seen by the AEBS unless the AEBS is 'looking' in the 802.11b/g 2.4Ghz frequency.
Hope this was helpful.

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have utility

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?

Do you mean an Airport Extreme Base Station connected to a Comcast Modem?

Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

David Why? wrote:
... How do you configure older Airports in OS X 10.7.5??
Use the technique described in this thread: I can't install airport utility 5.6
Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

Trying to connect my airport express to my home WIFI

Hi,
I have been trying to connect a airport express to my home WIFI connection for the purpose of wirelessly transmitting itunes to my Alfresco area using my iphone as a remote.
The problem i currently have is that the airport does not seem to pick up my wireless broadband.
My router is a Netgear dgnd3700.
The procedure i followed so far is : 1. Reset the airport back to factory settings.
2. Plug the ethernet cable in and open airport utility.
3. Tick the circle saying " join existing network ". Here's the problem, my wireless network does not show up.
I can type in the name of my network and also the password but the airport is not picking up the signal .... i cant choose a network.
I can create a new network no worries and connect devices to it but that's not what i'm after. I'd like to join my existing network so i can transmit itunes to my amp.
I've gone through the discussion forum but can't find an answer. I have also tried to manually set up the connection .. same result.
Any help would be great ... i'm about to give up and think it was abad idea ....

If it is the old G version Express you cannot use 6.3 utility.
You must use the 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Airport Express - need to run multiple internet connections from it.

My systems:
iMac
Airport Extreme
Airport Express
Currently, I use my airport express to wirelessly "feed" an internet connection to my Vudu box (movie download box). Right next to that box I would like to connect my Wii and DirecTV boxes to the internet using the airport express. The problem is that the airport Express has only one LAN line.
How can I share this one port with all three devices? I don't want to keep adding Airport Express boxes nor do I want to add an Airport Extreme at that location as I use airtunes on my stereo and Airport Extreme doesn't offer that. As you can tell I am not very computer literate so go gentle on me
any help is much appreciated.
Guy

Ok I need everyone's help. I just bought the AirPort Express I am running Windows XP Service pack 3 I have the ethernet connected to the airport express from our wireless router at the same time my computer is connected to the internet the same way. My computer has Internet just fine. After installing AirPort utility it is saying it is unable to find any Apple wirelss device. I am wanting to use my AirPort express with my IPhone when I travel Internationally. I know it works because fellow employess have done this. I have tried unplugging my Airport Expess and the light keeps blinking amber. How do I get to to flash green and how do I get the Utility to detect the Express so I can set everything up?

My Airport Extreme is constantly dropping my internet connection on all of my computers. Any help?

My Airport Extreme is constantly dropping my internet connection on all of my networked computers. It starts up again in about 2 minutes, but in the meantime, I've lost my websites and kept my clients waiting. Any help?

I had the same issue in version v5.6 but after upgrading the airport extreme firmware to latest 6.1 it solve the issue...

Problème de connection Airport Express avec réseau wifi

Bonjour,
J'essaie de connecter mon airport express à mon réseau wifi numéricable.
Petite spécificité de celui-ci: lorsque je veux me connecter à mon réseau avec un nouvel ordinateur.iphone... je dois saisir le nom du réseau car il ne me le propose pas de lui-même dans la liste des réseaux disponibles.
J'effectue donc le paramétrage normal (j'ai quand même du inscrire moi-même mon nom de réseau car il ne me le proposait pas) mais au moment du redémarage de mon airport après la programmation de celle-ci, j'ai un message d'erreur disant que ma borne n'arrive pas à déceler le réseau wifi, à quoi est ce du selon vous?
Merci de votre aide.
Louis

Bonjour,
Air port capsule revient au voyant lumineux orange après 3 ou 4 jours de fonctionnement au vert. Je le débranche et il fonctionne à nouveau pendant 3 ou 4 jours. Que se oasse-t-il?
Avez-vous reçu des réponses qui me permettraient de résoudre mon problème?
Merci
René Blouin

HT4259 i connected two airport extremes by extending a wifi network. wifi seems weak...help

i connected two airport extremes by extending a wifi network. all my lights are green, and airport utility confirms connections are excellent. but the extended base station hasn't improved my wifi range in the area i set it up in.

If you have a Mac laptop handy, run the test that I have outlined below to find out if the remote AirPort Extreme is really extending the signal at all.
Here, I assume that both of your AirPort Extremes are the newer "square" versions....not the older "round" version.
Locate your Mac laptop close to the "main" AirPort Extreme
Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen
Look for the BSSID and jot down the last few characters
The BSSID is the AirPort ID of the AirPort Extreme
Now, move the laptop close the "remote" AirPort Extreme and perform the same test
If you see the same BSSID as the "main" AirPort Extreme, your Mac is picking up from the main AirPort...and the remote AirPort is not configured correctly to extend.
If you see a different BSSID near the remote AirPort, that indicates that the Mac is picking up a signal from the remote AirPort....which is exending the signal correctly.

MacBook keep disconnecting from LinkSYS WAG325N WiFi Modem/Router

Hello,
I've been using my MacBook for a really long time. Over 1.5 years I had no Wi-Fi connection problems until my US Robotics 9106 Modem stopped working. I bought a nice LinkSYS WAG325N Modem. From that moment on, my MacBook started to disconnect from LinkSYS's WiFi constantly. I used every wep/web2 etc. security protocols possible. Nothing worked.
With my US Robotics I used MAC Filtering which worked perfectly. I did the same settings to LinkSYS as you can guess that didn't help at all...
I did firmware update to my modem, it even got worse so I downgrade my modem to previous version.
I read almost every forum out there, no one has came up with a solution.
If anyone has any idea how to fix this problem, please do so, I need urgent help or else I need to take my modem back before 15th day of using it is over. And try to find some modem that my MacBook would like...
Thank you.

Hello,
Yes I tried with US Robotics, worked perfectly.
It worked at all caffe's wifi spots (I have no info about their modem/router)
Strange enough, I realised that, if I place my old wifi modem next to this one just connecting the power and turning the modem on, somehow macbook connects fine !? it is too weird, and nearly impossible to explain. but if I place these two modems together and connect with linksys, and the other is just on, no connection no nothing just its wifi is on, MacBook connects... but if I leave the room and go to the living room the problem occurs again.
And since all the other windows laptops connecting from living room has %85 signal power this modem is wonderful. But for a MacBook, it is nothing but pain.
If I get a chance, I'll ask a friend to bring his macbook here which is newer (core2duo) mine is core duo and see what happens.

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

WDS? Connect 'UFO' Airport EX to Linksys WAG354G WiFi Internet connection

Similar Messages

Maybe you are looking for