WDS Error Code:0xc1420127

I am trying to add a network driver to a 64 bit Windows 7 boot image.  I get the error:
Error Occurred while trying to execute this command.
Error Code: 0xc1420127
The driver is for an HP 8540p.  I was able to add drivers to it before but it seems like anything 64 bit won't take.  I've deleted and reinstalled the image to no avail.  I've tried adding drivers with dism and that hasn't resolved either.
Please help!

Hello!
Unfortunately dosen't work. As I think this is architecture problem.
Server Win2k8 R2 Enterprise SP1 RU.
WDS Role Installed. With Windows 7 Enterprise x64-based boot&install images WDS working very well. Network drivers (x64) was added succesfully into x64-based boot image. Also after oobe preparation vga-drivers (x64) was added successfully to install.wim
(with DISM /add-driver utility).
Now I need to deploy x86-based Windows 7 Enterprise. Boot and install images was added to the server without any probles. It is necessary to add  network x86 driver package to x86 Windows 7 Enterprise boot.wim. But I have problems during adding drivers:
Error Code:0xC1420127
As you can see x64 images can be added wery well. 
How can I resolve the promblem? Can anybody help?
Thank you.

Similar Messages

  • Error code 0x80070714

    Im imaging a laptop computer from my WDS server and received the following error message
    "Windows cannot install required files. Make sure all files required for installion are available, and restart the installation.  Error code: 0x80070714"   I have check some of the other posting and my procedure is really not complacated. 
    I syspre the built image without and unattended file and have it pushed up to the server.  When I start the imagging process (again with out an unattended file) it seems to go through just about the complete process then comes up with this error. 
    All my other images seem to work fine.
    thanks for you help
    Kris
    Kris Da San Martino

    Hi,
    Towards the error message you have received, it seems that you don't meet the prerequisite before installing the WDS server. I'm not sure about your server version.
    There are two articles for your reference with different OS (2003 & 2008):
    Title: Step-by-Step Guide for Windows Deployment Services in Windows Server 2003
    URL: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
    Title: Windows Deployment Services Getting Started Guide
    URL: http://technet.microsoft.com/en-us/library/cc771670(v=ws.10).aspx
    Please make sure that you have met the prerequisites before installing the WDS server.
    Regards,
    James
    James Xiong
    TechNet Community Support

  • DHCP WDS Error

    Hi. Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment'when booting from a standard WDS boot.wim image taken
    from a Windows 7 DVD.
    I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM.
    When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP?
    As per some fixes I have read I enabled RSTP on my switches but that didnt help.
    I have included the end of setupact.log to see if any of you have any ideas.Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG.
    I dont suppose theres any way of increasing the timeout?
    Thanks.
    2011-04-11 17:26:31, Info       [0x0b0022] WDS    StartNetworking: Trying to start networking.
    2011-04-11 17:26:31, Info                  WDS    Network service dhcp not running or could not be queried: 264d00 1 1
    2011-04-11 17:26:31, Info                  WDS    Network service lmhosts not running or could not be queried: 264e18 1 1
    2011-04-11 17:26:31, Info                  WDS    Network service lanmanworkstation not running or could not be queried: 264d00 1 1
    2011-04-11 17:26:31, Info                  WDS    Network service bfe not running or could not be queried: 264e18 1 1
    2011-04-11 17:26:31, Info                  WDS    Network service ikeext not running or could not be queried: 264d00 1 1
    2011-04-11 17:26:31, Info                  WDS    Network service mpssvc not running or could not be queried: 264e18 1 1
    2011-04-11 17:27:24, Info                  WDS    Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded
    2011-04-11 17:27:25, Info                  WDS    No computer name specified, generating a random name.
    2011-04-11 17:27:25, Info                  WDS    Renaming computer to MININT-VN2P876.
    2011-04-11 17:27:25, Info                  WDS    Acquired profiling mutex
    2011-04-11 17:27:25, Info                  WDS    Service winmgmt disable: 0x00000000
    2011-04-11 17:27:25, Info                  WDS    Service winmgmt stop: 0x00000000
    2011-04-11 17:27:25, Info                  WDS    Service winmgmt enable: 0x00000000
    2011-04-11 17:27:25, Info                  WDS    Released profiling mutex
    2011-04-11 17:27:25, Info                  WDS    Acquired profiling mutex
    2011-04-11 17:27:25, Info                  WDS    Install MS_MSCLIENT: 0x0004a020
    2011-04-11 17:27:25, Info                  WDS    Install MS_NETBIOS: 0x0004a020
    2011-04-11 17:27:25, Info                  WDS    Install MS_SMB: 0x0004a020
    2011-04-11 17:27:25, Info                  WDS    Install MS_TCPIP6: 0x0004a020
    2011-04-11 17:27:26, Info                  WDS    Install MS_TCPIP: 0x0004a020
    2011-04-11 17:27:26, Info                  WDS    Service dhcp start: 0x00000000
    2011-04-11 17:27:26, Info                  WDS    Service lmhosts start: 0x00000000
    2011-04-11 17:27:26, Info                  WDS    Service ikeext start: 0x00000000
    2011-04-11 17:27:26, Info                  WDS    Service mpssvc start: 0x00000000
    2011-04-11 17:27:26, Info                  WDS    Released profiling mutex
    2011-04-11 17:27:26, Info                  WDS    Spent 967ms installing network components
    2011-04-11 17:27:28, Info                  WDS    Spent 2247ms installing network drivers
    2011-04-11 17:27:38, Info                  WDS    QueryAdapterStatus: no operational adapters found.
    2011-04-11 17:27:38, Info                  WDS    Spent 10140ms confirming network initialization; status 0x80004005
    2011-04-11 17:27:38, Info                  WDS    WaitForNetworkToInitialize failed; ignoring error
    2011-04-11 17:27:38, Info                  WDS    GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set:   
    2011-04-11 17:27:38, Error      [0x0b003f] WDS    StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb]
    2011-04-11 17:27:38, Info       [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server
    on this network segment.]

    Thanks for the reply. I have came across the post about removing setup.exe etc but thats a nasty hack and Id rather get the thing working properly.
    For my own testing to prove I had added the drivers correctly I booted off a base boot.wim with no drivers injected. There was no IP when running IPCONFIG. End of setupact.log shows
    2011-04-13 09:09:20, Info WDS Spent 936ms installing network components
    2011-04-13 09:09:23, Info WDS Spent 2355ms installing network drivers
    2011-04-13 09:09:23, Error [0x0b003e] WDS QueryAdapterStatus: no adapters found.[gle=0x000000cb]
    2011-04-13 09:09:23, Info WDS Spent 0ms confirming network initialization; status 0x80004005
    2011-04-13 09:09:23, Info WDS WaitForNetworkToInitialize failed; ignoring error
    2011-04-13 09:09:23, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set:
    2011-04-13 09:09:23, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb]
    2011-04-13 09:09:23, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while starting networking: a matching network card driver was not found in this image. Please have your Administrator add the network driver for this machine to the Windows PE image on the Windows Deployment Services server.]
    Next, I injected the latest Broadcom drivers into another base boot.wim file. IPCONFIG shows an IP address. End of setupact.log shows
    2011-04-13 09:17:38, Info WDS Spent 936ms installing network components
    2011-04-13 09:17:40, Info WDS Spent 2309ms installing network drivers
    2011-04-13 09:17:50, Info WDS QueryAdapterStatus: no operational adapters found.
    2011-04-13 09:17:50, Info WDS Spent 10140ms confirming network initialization; status 0x80004005
    2011-04-13 09:17:50, Info WDS WaitForNetworkToInitialize failed; ignoring error
    2011-04-13 09:17:50, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set:
    2011-04-13 09:17:50, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb]
    2011-04-13 09:17:50, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : minint-2eljtfg
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : correct.co.uk
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : correct.co.uk
    Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
    Physical Address. . . . . . . . . : 78-2B-CB-93-11-F8
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::a098:117a:a1fd:a4b9%2(Preferred)
    IPv4 Address. . . . . . . . . . . : 10.0.0.78(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : Wednesday, April 13, 2011 9:17:57 AM
    Lease Expires . . . . . . . . . . : Thursday, April 21, 2011 9:17:57 AM
    Default Gateway . . . . . . . . . : 10.0.0.66
    DHCP Server . . . . . . . . . . . : 10.0.0.21
    DHCPv6 IAID . . . . . . . . . . . : 41429963
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-37-93-19-78-2B-CB-93-99-F8
    DNS Servers . . . . . . . . . . . : 10.0.0.21
    10.0.0.6
    NetBIOS over Tcpip. . . . . . . . : Enabled
    See the difference? 'no adapters found' vs 'no operational adapters found'.
    However this time I did notice that when I typed IPCONFIG straight away after the error message poped up it only showed an IPV6 address. Then when I tried 1 second later it had picked up the DHCP address.
    Seems that the network card takes some time to initialize and the deployment setup is too impatient and falls over?

  • Install Updates step fails in Build and Capture (error code 87D00272)

    Hello,
    I was really hoping someone could help me with this.
    Background information:
    - We have a CM07 server in a production environment.
    - I've set up a CM12 RTM server, following the guides in this forum, with the hopes of migrating soon.
    - I wanted to do OSD from scratch to learn more and to take advantage of new features in CM12.
    - I have a few virtual machines running for testing OSD/apps (these are the only clients managed by my CM12 server).
    - Since it's not possible to have two WDS servers running at the same time AFAIK (without using registry tweaks, the F11 trick, that by the
    way doesn't work for me) I have created a bootable TS media that I mount on the virtual machines whenever I want to test OSD.
    Now, to my problem:
    I can't figure out why my Build and Capture TS is failing on the Install Software Updates step. smsts.log file says: Failed
    to RefreshUpdates, hr=087d00272, followed by: Failed to run the action: Install Software Updates. Component is disabled (Error: 87D00272; Source: CCM).
    I have read about similar issues occurring in CM07 capture task sequences since the machine is joined to a Workgroup. The proposed solution was adding SMSSLP=FQDN to the client installation properties, but since that functionality is moved to the MP in CM12,
    it should be enough to specify SMSMP=FQDN in my case. It's not working anyway. Tried it to a Deploy TS also, where the machine is domain joined, but I got the same error.
    The error code 87D00272 returns no results on Google. This stumps me, as someone surely has had the same problem? Here are the relevant portions
    of the smsts.log file
    If someone had the chance to look at this, I would greatly appreciate it. Thank you!
    Refreshing Updates InstallSWUpdate 2012-06-13 10:15:33 228 (0x00E4)
    spInstall->RefreshTargetedUpdates( spCallback, &bAlreadyCompleted ),
    HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
    \installswupdate.cpp,467) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
    Failed to RefreshUpdates, hr=0x87d00272 InstallSWUpdate 2012-06-13 10:15:34 228
    (0x00E4)
    RefreshTargetedUpdates(spInstall, spCallback, bAlreadyCompleted), HRESULT=87d00272
    (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
    \installswupdate.cpp,1295) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
    RefreshUpdates(), HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment
    \installswupdate\installswupdate.cpp,906) InstallSWUpdate 2012-06-13 10:15:34
    228 (0x00E4)
    InstallUpdates(pInstallUpdate, tType, sJobID, sActiveRequestHandle),
    HRESULT=87d00272 (e:\nts_sccm_release\sms\client\osdeployment\installswupdate
    \main.cpp,248) InstallSWUpdate 2012-06-13 10:15:34 228 (0x00E4)
    Setting TSEnv variable SMSTSInstallUpdateJobGUID= InstallSWUpdate 2012-06-13
    10:15:34 228 (0x00E4)
    Process(pInstallUpdate, tType), HRESULT=87d00272 (e:\nts_sccm_release\sms\client
    \osdeployment\installswupdate\main.cpp,304) InstallSWUpdate 2012-06-13 10:15:34
    228 (0x00E4)
    Process completed with exit code 2278556274 TSManager 2012-06-13 10:15:34
    912 (0x0390)
    ---------! TSManager 2012-06-13 10:15:34 912 (0x0390)
    Failed to run the action: Install Software Updates.
    Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
    10:15:34 912 (0x0390)
    MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
    2012-06-13 10:15:34 912 (0x0390)
    Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
    Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
    Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
    Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
    Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
    CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
    /ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
    Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
    Set a global environment variable _SMSTSLastActionRetCode=-2016411022 TSManager
    2012-06-13 10:15:35 912 (0x0390)
    Set a global environment variable _SMSTSLastActionSucceeded=false TSManager
    2012-06-13 10:15:35 912 (0x0390)
    Clear local default environment TSManager 2012-06-13 10:15:35 912 (0x0390)
    Let the parent group (Setup Operating System) decides whether to continue execution
    TSManager 2012-06-13 10:15:35 912 (0x0390)
    The execution of the group (Setup Operating System) has failed and the execution has
    been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows) TSManager 2012-06-13
    10:15:35 912 (0x0390)
    Failed to run the last action: Install Software Updates. Execution of task sequence
    failed.
    Component is disabled (Error: 87D00272; Source: CCM) TSManager 2012-06-13
    10:15:35 912 (0x0390)
    MP server http://CFGMGR-SRV.zenit.brummer.se. Ports 80,443. CRL=false. TSManager
    2012-06-13 10:15:35 912 (0x0390)
    Setting authenticator TSManager 2012-06-13 10:15:35 912 (0x0390)
    Set authenticator in transport TSManager 2012-06-13 10:15:35 912 (0x0390)
    Sending StatusMessage TSManager 2012-06-13 10:15:35 912 (0x0390)
    Setting message signatures. TSManager 2012-06-13 10:15:35 912 (0x0390)
    Setting the authenticator. TSManager 2012-06-13 10:15:35 912 (0x0390)
    CLibSMSMessageWinHttpTransport::Send: URL: CFGMGR-SRV.zenit.brummer.se:80  CCM_POST
    /ccm_system/request TSManager 2012-06-13 10:15:35 912 (0x0390)
    Request was succesful. TSManager 2012-06-13 10:15:35 912 (0x0390)
    Launching command shell. OSDSetupHook 2012-06-13 10:15:45 1932
    (0x078C)
    executing command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
    10:15:45 1932 (0x078C)
    executed command: C:\WINDOWS\system32\cmd.exe /k OSDSetupHook 2012-06-13
    10:15:45 1932 (0x078C)
    Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:
    \nts_sccm_release\sms\client    asksequence    smanager    smanager.cpp,756) TSManager
    2012-06-13 10:16:57 912 (0x0390)
    Task Sequence Engine failed! Code: enExecutionFail TSManager 2012-06-13
    10:16:57 912 (0x0390)
    TSManager 2012-06-13 10:16:57 912 (0x0390)
    Task sequence execution failed with error code 80004005 TSManager 2012-06-13
    10:16:57 912 (0x0390)

    I can add that I've looked at the Site Status in the Monitoring tab, and everything looks green apart from some Warnings about User and System Discovery. In Component Status, I have a warning about the Distribution Point on C$. I thought placing a NO_SMS_ON_DRIVE.SMS
    file in the root of C: would mean no stuff was placed there? I can't see anything SCCM related, but it seems that it has placed a DP on C:?
    The error message about DP is: 
    Distribution Manager has not tried to install IIS component of operating system to distribution point "["Display=\\CFGMGR-SRV.zenit.brummer.se\"]MSWNET:["SMS_SITE=PS1"]\\CFGMGR-SRV.zenit.brummer.se\". You should install and configure IIS manually. Please
    ensure RDC is also enabled.

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Report generation failed----​error code:-1720​5; Access Denied.

    Hi, All
        i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
        detail:
        An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
    Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
    The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility. 
        error code:-17205; Access Denied.
        locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
        How to fix it?
        Thanks a lot.
    BR

    Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
    CTA, CLA, MTFBWY

  • There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

    I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

    Do a clean (re)install
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    From https://support.mozilla.com/en-US/questions/764376

  • My ipod touch is not list as a device on itunes.  When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

    My ipod touch is not listed as a device when connected to my computer.  As suggested I attempted to download the latest of itunes.  I got an
    ox8007054f error code and the down load will not complete.  I have also tried to restore my computer to an earlier setting, but it will
    not accept the change.

    Have you looked at this completed previos discussion. It discusses 0x8007054F.
    Re: Error message when trying to install iTunes

  • Capturing oracle error codes into a variable

    Hi
    Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
    How do I achieve this?

    user633278 wrote:
    How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
    SQL> declare
      2      x number;
      3  begin
      4      x := 1/0;
      5    exception
      6      when others
      7        then
      8          dbms_output.put_line('Error code: ' || SQLCODE);
      9          dbms_output.put_line('Error message: ' || SQLERRM);
    10  end;
    11  /
    Error code: -1476
    Error message: ORA-01476: divisor is equal to zero
    PL/SQL procedure successfully completed.
    SQL> SY.

  • Error Code:942 While Scheduling a report in BI Publisher

    Hi All,
    I am trying to schedule one report in BI Publisher.
    After Clicking Submit Button while scheduling report,i get following error:
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
    Kindly Help me in resolving this issue
    Regards
    Amrita Singh

    i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
    I would recommend, you to install the scheduler in another schema or another db.
    Re-installing the scheduler schema tables will fix this.

  • ORA-00600: internal error code, arguments: [ktsircinfo_num1]

    While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
    . . exporting table TEST4
    EXP-00003: no storage definition found for segment(29, 371385)
    SQL >Drop table test4 cascade;
    ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
    sql> Desc test4;
    ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
    I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

    hi
    read metalink ID - 153788.1
    CHeers

  • Transport control program tp ended with error code 0212

    Hi all,
    I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                           service: transport service
                                                                           start : online
                                                                           Function: TMS_TP_SHOW_BUFFER
                                                                           message: TP_REPORTED_ERROR
    In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
    Can you tell me how to resolve this issue?

    dev_tp contains:    
    This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
    unicode enabled version
    usage: R3trans.exe [<options>] <control_file>
    The control_file describes what R3trans has to do.
    The following options are possible:
    -c f1 f2 : Copy file f1 to f2 with character set conversion.
    -d       : DB connect. Test if SAP database is available.
    -i file  : Import from file without using a control file.
    -l file  : List the contents of file to the log file.
    -m file  : List the contents of file to allow tp to create a cofile.
    -t       : Test. All database changes are rolled back.
    -t4      : Trace level 4. Switch on developer trace.
    -u <int> : Unconditional modes. See below.
    -v       : Verbose. Write more details to the log file.
    -w file  : Log file. The default log file is 'trans.log'.
    -x       : DB connect without access on any SAP table.
    R3trans.exe finished (0012).
    & the slog file is not there in the trans/log directory

  • While activating a request in DSO getting error code 10

    While activating a request in DSO getting error code 10
    Hi All,
    I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
    Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
    I have checked the formula in Transformation and it works fine. Still I am not able to load data.
    Please help.
    Thanks and regards
    Vishal Pardeshi

    Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
    Otherwise you can check the error from the monitor screen of the request in Details tab.
    Veerendra.

  • Some data in ... could not be read or written. (Error code -36).

    Hello.
    I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
    'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
    So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
    But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
    So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
    But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
    And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
    Thanks.
    Mac mini   Mac OS X (10.4.3)  

    I experienced a problem in a familiar way.
    After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
    Somehow the proces stopped prompting an -36 error over some files.
    When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
    Any-one a solution?
    Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

  • "the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

    Hi all,
    I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
    It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
    "the finder cannot complete the operation because some data in [name of
    iMovie file] could not be read or written (Error Code 26)" or the
    message "A project file is missing. The file [name of the QuickTime
    movie inside the project.dv] couldn't be opened and is being skipped."
    This happened suddenly, I was able to save a backup version numerous
    times while working on the project.
    I followed some of Karl Petersen's advise on apple discussions. I opened
    the package contents, and everything seems to be there. The source file
    (original QuickTime movie) is there and can be opened and played. I
    replaced the current project file with the backup in the package
    contents, but that did not change anything. I was able to export the
    movie timeline into a new project as a single clip, but would like to be
    able to copy the current project.
    Thanks for any ideas..

    Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

Maybe you are looking for

  • Hanging Report Builder and Runtime-6i

    Hi The Reports 6i Builder and Runtime screens are taking 15-20 minutes to open in Win NT Environment.Earlier they used to work just fine.In this 'vaccum' time the task list shows Program not responding but eventually after 10-15 minutes ,the window o

  • Newsletter 5-30-04

    Arch Linux Weekly Newsletter *Jason Chu and Ben Mazer*   Opening Welcome to the Arch Linux Newsletter. This attempts to give you an ``at a glance'' look at the world of Arch Linux.   News     Front Page News    1. There's a new glibc in the Testing r

  • Can Not Get 7.2 Version Downloaded

    I have Tried & Left PC Running to Download the Latest update but Keep getting: "The iTunes application could not be opened. An unknown error occurred (0x666D743F)." What Should I do? I have Done The Troubleshooting It Never Downloaded? Why?

  • Internet activity causes audio cracking

    Here is my problem. I own a Toshiba Satellite pro L300-EZ1004x. The laptop is pre loaded with windows XP professional, and I decided to upgrade to Vista Business with SP1. When loading webpages or downloading, My audio/music will crack up until the w

  • How to perform dbx. extract?

    Yesterday my outlook express messages were damaged by a virus. I need to make dbx extraction.