WDS Multiple x64 Images for Windows 7 & 8.1

Hi all,
I wanted to know, what would be the best way to setup my WDS so that I can incorporate both windows 7 & 8.1 x64 boot and capture images.
The reason I ask this, is because I added the Windows 8.1 boot image, created a capture image and then after sysprep'ing a machine with windows 8.1 64 bit, I tried to capture it but ended up with the 0xc000000f error which has knocked out all of my
capture images.
I've only just attempted the dism mount & dismount method to see if it has fixed it, but I would appreciate if anyone knows an error free method so that I can have both windows 7 & 8.1 capture images to work together.
Thanks,
Hasan

Hi Hasan,
You can use the following similar thread solution to fix this issue.
Image Capture Boot Image Fails with 0xc000000f
https://social.technet.microsoft.com/Forums/windowsserver/en-US/a164b948-1778-42bd-8d77-9cef1ca70866/image-capture-boot-image-fails-with-0xc000000f?forum=winserversetup
If your WDS server are integrate with DFS please confirm the DFS has sync complete then to start deploy.
More information:
0xc000000f after reboot
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/0xc000000f-after-reboot/5da88257-837d-4475-ad6e-9ea8968826f4
MDT 2012: File: \boot\BCD Status: 0xc000000f error
https://social.technet.microsoft.com/Forums/en-US/e8d30795-bda8-4162-80bb-2af6b90f1365/mdt-2012-file-bootbcd-status-0xc000000f-error?forum=mdt
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Setting multiple album images for a group.

I want to put multiple images for CDs that I have (Front, back, inside of booklet, etc). Can I do this for an entire CD or do I need to do each song separately?

You can add multiple album artwork images to multiple tracks at the same time, but not through the Multiple Song Get Info pane. Each time you drag an image onto the Artwork box in this pane, the previous image is erased.
To add multiple images, select your tracks in the main iTunes Window, and make sure that Artwork box under the Source Menu is visible. Then just drag the image you want to add to the tracks onto this pane, but make sure you FIRST add the image you want to appear FIRST. There isn't any way to reorder the images in a group of tracks - that has to be done in the individual track's artwork pane (Get Info>>Artwork tab).
Lita

Adobe Premiere Elements 7 - Selecting Multiple Still Images for Time Stretch

Hi,
I have Adobe Premiere Elemetns 7. I would like to be able to select multiple still images on the timeline so that I can timestretch them all at the same time.
I understand that you can do this when you drag the photos over to the sceneline, then get the dialog box that asks for the time duration or transition duration. I would like to do this after they have been placed on the timeline though.
I would like to put say an hour of music on the music line, then drag over say 400 photos, then timestretch the photos such that thier time matches the music timeline. Smartsound does not seem to find the music on my computer to do this, I would like to use my own music.
Any help would be appreciated, thanks.

Tonight why don't you download the free 30 tryout of Premiere Elements 8, check out the feature of interest in particular, and determine if it is worth it. Check out it's stability in your computer environment. You do not have to uninstall Premiere Elements 7. When you install Premiere Elements 8, the installation process detects prior versions and tells you that you do not have to uninstall them, just use one at a time.
Depending on how things go, get on the phone to Adobe Customer Service Monday morning and be pleasant but determined, express your need for the new feature(s), and request an exchange, the new for the old. As a last resort, request your money back for version 7.
Please update us on your progress. But, in the back of your mind, keep the old thought of "be careful what you wish for". You may win one with the duration feature but lose some ground with stability and other features.
ATR

Multiple Library Manager for Windows

I want to create multiple music libraries - one for wav files (for streaming to home stereo) and one for Apple Lossless files (for synching with iPod). Can someone recommend a good iTunes Library Manager for Windows? And where to get it?

iTunes is the only library manager for iTunes.
Use the shift key depressed while opening iTunes option. This allows you to pick a library for use during that session.

Is Firefox x64 (Minefield) for Windows compatible with the x64 Java 7 Beta?

Firefox x64 (Minefield) on Windows 7 crashes with the Beta x64 Java 7 (it works on 64 bit windows, and the 32 bit java 7 works in 32 bit firefox). It works fine with any newer version of Java 6 x64 however. Is this a firefox or Java bug?

I was having this problem myself until just recently.
However, it works for me with the following:
Nightly x64 6.0a1 builddate 05222011 and
Java 7 x64 b143
Earlier versions causes crashes, so try updating to the latest JRE7 and the latest Nightly.

ISO image for windows

I wonder if anyone can help.
I have a game that is for windows that i want to run on my Macbook air through bootcamp. however as i dont have a CD/DVD drive on the Air i cant as it always has to be inserted to play. I am trying to create an ISO that can be used on window using Disk Utility but it says its corrupt on Windows.
Any experts here know how i do this ?
iv tried youtube and google but no luck yet
Thanks

Copy the contents of the games install CD/DVD to your Windows partition and install the game from that location. then when you start the game it will look at the Install Location to find the files it need to run and they will be on your Windows partition and not on a CD or DVD disc.
Since you don't have a DVD drive you would need another computer to copy the contents of that CD/DVD to a USB thumb drive then copy that your your Windows partition. It would be best to place those files in a folder in the ROOT of the C drive.

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

What is the right way to do a sysprep Image for Windows 7 and 8

Hi,
i´d like to know which way is the right one to do a sysprepp from an System with Windows 7/8.
Is it ok when I install the system with all drivers/patches etc. and after that I will open a command prompt with admin rights and choose the settings OOBE and Genrealize and Shutdown.
After that I create an Image with ImageX or Acronis and I´m ready to deplay it right? The local user which I created during the installaton should stay as an Supportuser.
So is ok or is there something wrong. Microsoft itself shows this way here:
http://technet.microsoft.com/en-us/windows/ee530017.aspx
But they write a lot of other faq´s where they discribe other ways. So what is now right and wrong?
Please don´t le my die stupid ;)
Regards,
The Core

Hi,
Any update here? Have you checked the links above?
Regarding your concern, it is OK to install the drivers or patches before you Genrealize the image. And if we want to keep the drivers during sysprep in order to use it on the computers with the same hardware configuration, we should specify
PersistAllDeviceInstalls to true.
Important: When you set up your reference computer, Windows Setup installs drivers for any detected devices. By default, Windows Setup removes these drivers when you generalize the system. If you're deploying the image to computers that
have the same hardware and devices, you'll want Windows Setup to reinstall these same drivers. To keep these drivers on the computer during system generalization, set the Microsoft-Windows-PnPSysprep |
PersistAllDeviceInstalls setting to true.
The video shows the general steps using sysprep and imagex to capture the image. If you have no special requirements for drivers, or some applications need to be specific, just follow the steps. OOBE is a simple booting process, and audit mode is a process
to specific the image. More information, see:
Customize Windows in Audit Mode
Any other concerns?
Best regards
Michael Shao
TechNet Community Support

PrintWindow() API does NOT get an image for Windows created by Java?

Hi
WinXP added the PrintWindow() API that allows one application to take an image copy of another app's window, even if the window is off-screen or obscured, ie beyond the scope of a simple BitBlt. (PrintWindow seems to be a cross-process "extension" of the WM_PRINT message).
But PrintWindow doesn't seem to work when I "point" it at any Java-based apps. That is, for a few java-based apps (including the Java Control Panel) running on XP, the return from PrintWindow includes the non-client area, but the client area is just blackness (not a render of what would be displayed) - the apps do flicker and seem to redraw on the screen instead. Note, I'm not looking for help in using PrintWindow() in a Java app - rather this is perhaps a problem with Java responding to windows painting messages.
I've tried JRE 1.5.0_07-b03 and 1.6.0_01.
Is this a bug in the Java implementation? I'm a bit surprised I can't find any reference to it. Is there a work around?
For a source-code (C++) example of PrintWindow in a small app see http://www.codeguru.com/cpp/g-m/gdi/capturingimages/article.php/c11231

PS
I wasn't able to find a forum that seemed to cover this type of issue. If I've posted in the wrong place could someone more knowledgeable tell me where it should go. Thanks.

Adjusting an image for window minimization

We have an image that we are posting directly to the page instead of calling it from an html portlet for performance reasons. Does anyone know how we can set our image to adjust if someone minimizes the window. Right now if it is minimized, everything adjusts but the image and you can scroll over and see the ugliness. Thank in advance for any suggestions!

why dont you try to use a <table> and width and height use % like 90% not a fixed number.
Regards.

Accounting for Multiple Cygwin Paths for Windows Hosts

Hello everyone,
We are using EM12cR2 (installed on RHEL) but need to monitor a number of Windows hosts. For most Windows hosts, Cygwin is installed in the default path (C:\cygwin) but we also have Citrix XenApp servers that we would like to monitor but they do not have a C: drive, just M:. I've seen the settings file that allows someone to change the Cygwin path but I can't find information on whether or not you can add multiple paths to that line and what that syntax would be. I've also seen an older Citrix plug-in but I don't see anything stating it's compatibility with this version of EM. If I could, I would test out a number of scenarios in a lab environment but we don't have that option.
Does anyone know if it's possible to add multiple Cygwin paths (and what the syntax is), if the Citrix plug-in is compatible with EM12cR2, or if there's another way to do this that I'm not thinking of?
Thank you,
EMS

Hi ,
you have to update the following properties in $OMS_HOME/oui/prov/ssPaths_msplats.properties to reflect the new cygwin installation location.
eg.
From
SSH_PATH=C:/cygwin/bin/ssh.exe
SCP_PATH=C:/cygwin/bin/scp.exe
MKDIR_PATH=C:/cygwin/bin/mkdir.exe
SH_PATH=C:/cygwin/bin/sh.exe
CHMOD_PATH=C:/cygwin/bin/chmod.exe
TRUE=C:/cygwin/bin/true.exe
To
SSH_PATH=M:/cygwin/bin/ssh.exe
SCP_PATH=M:/cygwin/bin/scp.exe
MKDIR_PATH=M:/cygwin/bin/mkdir.exe
SH_PATH=M:/cygwin/bin/sh.exe
CHMOD_PATH=M:/cygwin/bin/chmod.exe
TRUE=M:/cygwin/bin/true.exe
thanks,
Prakash

Multiple target images for disjoint rollovers

I have one large image on the left that serves as the target
(area?) and 4 smaller images on the right that should serve as four
separate triggers. When moused over, each trigger should cause a
separate image to appear in the trigger area.
I've been successful using Fireworks to make that happen for
one trigger but can' only get on trigger/target to happen.
Can someone help me with this.

> Can someone help me with this.
Don't do this in FW. The HTML that FW writes is really only
suitable for
proptyping. For production work, do such things in DW.
There is a good disjoint tutorial here -
http://www.dwfaq.com/tutorials/basics/disjointed.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"c15202" <[email protected]> wrote in
message
news:g6v1pc$n4j$[email protected]..
>I have one large image on the left that serves as the
target (area?) and 4
> smaller images on the right that should serve as four
separate triggers.
> When
> moused over, each trigger should cause a separate image
to appear in the
> trigger area.
>
> I've been successful using Fireworks to make that happen
for one trigger
> but
> can' only get on trigger/target to happen.
>
> Can someone help me with this.
>

Norton Ghost or Drive Image for Windows XP

Has anyone tried the above backup softwares to backup your Windows XP drive? Did it work at all? So how anyone backup your XP drive and restore it in case of drive failure? Thanks.
Nathan

Hi Nathan,
You can try Winclone http://www.twocanoes.com/winclone/
It's relatively new and up to now I only have made one backup of my BC/Windows partition, and restored it back to another drive and it work.
For it to work your Windows must use the NTFS disk-format, as it will not work with FAT32-format.
If your Windows is using FAT32 you can make a backup with Disc Utility from Apple.
Found one Thread for backing up FAT32 Windows:
http://discussions.apple.com/thread.jspa?threadID=717201&start=0&tstart=0
Have Fun
Stefan

Windows 7 Prof CIS and GE image for T420

Dear Lenovo,
I have a question: I have Lenovo Think Pad T420 with preinstalled Windows 7 Prof OA CIS and GE
I recently format it, and now I need Windows 7 image to reinstall system. Where I can get it?
May I use MSDN image for Windows 7 Prof RU and activate it using product key which I have on my laptop?
Solved!
Go to Solution.

Yes. Download the .iso, burn it to disk or USB key, and install.
It will activate on the Certificate key found under the battery.

MULTIPLE place image import...& "save as.." multiple layers to multipage PDF

Hello,
just some suggestions I`d like to see to speed up my set up and output..
i`d like to import multiple placed images into illustrator CS4. So open dialogue box place, and multiple select images for placing.
regards output save as...
Can we output multiple layers into a single PDF in illustrator? Or multiple layers into single JPEGS from illustrator with one command instead of individually saving out each layer... would be a huge time saver for me.I create different artworks on different layers..
Currently I output each completed layer individually and then right click those outputted jpegs in their output folder and choose "combine supported files into acrobat..." to make a single acrobat file..i`d like to do this right in the illustrator "save for PDF" dialogue box. Adding something in the Save for PDF output dialogue box to save layers to one PDF as multiple pages would be a helpful time saver..
I`d also like to be able to CTRL click multiple layers and go " save as..." only those layers get saved out...

, bridge -FILE/PLACE into ai, goes to separate layers in AI as placed.
in PS, bridge/tools/ps/load files into ps layers.. CS4.
just using right click in explorer on individual PDF docs from layers saved from PS to combine to PDF. but cannot output multiple pds from layers in AI in CS4.

WDS Multiple x64 Images for Windows 7 & 8.1

Similar Messages

Maybe you are looking for