WDS , Server 2012 R2 and eUFI boot

Hi,
Setup WDS on Server 2012 R2 , PXE boot is working if I disable secure boot and enable legacy boot.
PXE boot working only in legacy mode, and if I install the OS anyways in legacy mode, then enable the Secure boot, machine not able to boot (because uefi support was disabled)any thoughts why?
N.A.Malik

Use your boot menu option on the client to verify you are actually doing a UEFI PXE boot.
I always make sure to use the client's boot menu to verify I am attempting to boot the system with the correct option. This picture shows a system that has UEFI boot enabled and legacy boot disabled. If you have both enabled, you would see UEFI prefixed
and normal options. NOTE: your PC's boot menu may appear differently.
Hello and thanks for reply.
Actually I am pressing F12 to get the PXE boot.
And I have disabled the legacy support in BIOS.
N.A.Malik

Similar Messages

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

I have windows server 2012 R2 and install active directory

My question is I install active directory in windows server 2012 R2 and create Group Policy. ( These set-up is only for test)
Have not registered domain only install active directory to test.
So the problem is when I created Group policy for my user and put software restriction policy but its affected to my administrator accounts too, No when I open VMware (install Virtual Machine windows XP) and start os then its shows you can not user this
software as you restricted from installing software (Something like that don't know exact Error). I could not start installed Virtual Machine.
Please give me a solution for this.
This is the setup for a test use only so their not big environment connect with my pc.
Thanks in advance.
Regards,
Krunal

Hi,
The following article is talking about creating and managing Group Policy on a Windows Server 2012:
http://www.thomas-krenn.com/en/wiki/Creating_and_managing_a_Group_Policy_on_a_Windows_2012_Server
As Darren Blanchard mentioned, if you want to apply the GPO, you could link it to an OU that contain the computer or user.
Group Policy Overview
http://technet.microsoft.com/en-us/library/hh831791.aspx
Please feel free to let us know if you need further assistance.
Regards.
Vivian Wang

Hyper-v Role in Windows Server 2012 foundation and Essentials

Hello,
I have seen that the two low cost version of Windows Server 2012 essential and Foundation) will not support hyper-v. Can you please tell me what it means exactly :
Can you please tell me what is possible :
-The server can not be installed as a hyper-v guest (probably yes)
-The hyper-v role can not be installed on the server (so I have to rely on vmware)?
- Hyper-v role can be installed but there is no free license included with the server.
Thank you
Marc

I suppose then, you would have to install Windows 8 and Hyper-V as your guest or core.
Then run your Server 2012 Foundation under Win8. which has 512GB Memory Limit.
It seems asinine that you cannot install this role on Foundation, but seemingly you could work around it with Win8. (Or Sun Virtual Box (free) (or VmWare(Free).
So load up a dozen Win8Pro virutal sessions on that Win8 VirtualBox with up to 512GB Memory and Create your own Ghetto Remote Desktop Server with Foundation and Windows 8. ;)
What good is it if your can't run Hyper-V and Remote desktop services? Those are the two apps small business need most. But Microsoft strips it out, calls it a DEAL (Essentials and Foundation) , yet if you want the good stuff, you're gonna
have to buy Server 2012 Standard anyhow, + the CALs.
So you are hooked into this "deal" by Microsoft Special Offer. Its special alright, because you get to buy it twice. The stripped down version that come with your server, then the full version when you discover Foundatoin and Essentials gives
you AD, and thats it. Nothing Else. No "deal"
Remember:
All you get with Foundation or Essentials is AD and Group Policy.
You cannot load RDP on Foundation or Essentials
You cannot load Exchange on a DC, or Foundation or Essentials
You cannot load Exchange and RDP on the same box.
You cannot have Remote Web Apps if you load RDP on your DC.
You cannot win with Microsoft. No worthwhile "deal" has ever come out of the city of Redmond.
The internet is a one-way money pipeline to Microsoft.
Its three times the work, three times the cost and requires three servers licenses to do with 2012, what you could do with one 2008R2 license.
Might as well purchase 2 Server 2013 Standard Editions if you want:
1.) Active Directory
2.) Remote Desktop and Remote Apps
3.) Your own Exchange Server
You are better off installing a NAS if all you need is a file server.
Why bother with Foundation or Essentials? Its a "Gimmick-ware"

Windows Server 2012 Standard and Essentials User CAL's

I've been running Windows Server 2012 Essentials in an organization that until recently stayed within the 25 user 50 network device limit specified by the license. Eventually we've grown beyond that. Since the Server 2012 Essentials machine had a non-transferable
OEM license I decided not to waste it by doing an in-place migration to Server 2012 Standard, and instead set up a new server with freshly purchased Server 2012 R2 Standard and migrated Active Domain roles to it, leaving the original server as a part of a
fail-over cluster.
We purchased 30 User CAL's for the 2012 R2, as required for 25+ staff members.
Now I am curious. The 2 servers that we have right now (2012 R2 Standard and 2012 Essentials) both maintain the same Active Directory and manage the same pool of users and workstations. Does that mean that the primary server with 30 User CAL's takes dominance
and sets the limit as to how many people are allowed to access the network. Or does it become a combination of purchased 30 CAL's + 25 Users hard-wired into the 2012 Essential edition?
Do these servers have to run separate domains with segregated pools of users in order to be license compliant for 30+ users or can they exist within the same same domain preserving individual user limits? What if the 2012 Essentials server maintains
one office location with fewer than 25 staff and the Standard R2 2012 server runs another office with fewer than 30 staff, while both offices are linked via a VPN for the purpose of sharing 3rd party licenses? Do individual user limits apply, or is it still
30 users max?
To sum up the question, I'd like to know whether I'd need to buy more user CAL's when we reach more than 30 staff at 1 or possibly 2 office locations.
Oh, and the device limit! 2012 R2 Standard under user CAL licensing scheme has no machine limits. Essentials is always capped at 50. When running one active directory, what's the legally allowed number of devices on the network? I assume it's unlimited.
Thanks.

Thank you for the reply.
My question then is how to transition while preferably keeping both physical servers.
Should a 2012 Standard key be purchased additionally for an in-place transition of 2012 Essentials machine to 2012 Standard (which at this point is as good as a fresh install)? Until then, should the Essentials 2012 server be taken offline entirely?
What about the situation where I described both servers running segregated networks with their own pools of users, only connected via a VPN for 3rd party license sharing? Is that configuration supported?
Also, if the configurations is unsupported, why are the servers able to share roles in first place? Why isn't there a software mechanism preventing interaction? What configuration do the servers themselves assume is in place?
Thanks again.

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

Hi,
Agreed with DonPick.
Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
More information regarding Internet Explorer 11, please check:
Internet Explorer 11 - FAQ for IT Pros
http://msdn.microsoft.com/en-us/library/dn268945.aspx
Best regards
Michael Shao
TechNet Community Support

Just FYI, Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide in Word format in the TechNet Gallery

The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllece

hello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer

Server 2012 R2 and DPM 2012 (ocsetup not recognized)

I am trying to install DPM 2012 on Server 2012 R2 and unalbe to get past prerequisties check. When I try the command "OCSetup.exe SIS-Limited" it comes up that OCSetup is not recognized. How do I install (SIS) on Server 2012 R2?

Hi.
DPM 2012 SP1 is not supported running on Windows 2012 R2. Please decide on one of the following.
A) Install DPM 2012 R2 on the Windows Server 2012 R2 or other
supported operating systems.
B) Install DPM 2012 SP1 on Windows Server 2012 or other
supported operating systems.
FYI for Windows server 2012 R2 the new command is:
dism /online /enable-feature:SIS-Limited
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

MDT 2013, WDS, Server 2012 R2 multicasting not working rc = -1073740940

Hi,
I have been reading all over the internet and not able to find an issue that we are having. We have setup MDT 2013 and WDS on a Server 2012 R2 server. Unicast has been working fine for us and we have the PXE boot working great too. We have
recently tried setting up Multicast. Every time we try and deploy an image we receive the following error when the client tries to run the multicast. I have pulled this error from the ltiapply.log on the client. The error is:
Multicast transfer could not be completed, rc = -1073740940, falling back to using \\mdtserver\deploymentshare\operating systems. We have also made sure we have IGMP enabled on all our switching and VLan's. We have tested with mcast.exe
and Wireshark and the packets are hitting the machine for multicast but we always seem to get this error. Any help would be great.
Thanks,

MDT logs the output from the wdsmcast.exe command itself within the bdd.log file.
A quick scan reveals:
Multicast transfer to directory: C:\MININT\Operating Systems\BaseWin7x64_6_17_2014
<Message containing password has been suppressed>
Command has been started (process ID 776)
Console >
Console > Windows Deployment Services Multicast Client [Version 6.3.9600.17029]
Console > Copyright (c) Microsoft Corporation. All rights reserved.
Console >
Console >
Console > Operation Failed. [0x80070523].
Console >
Console > The name provided is not a properly formed account name.
Console >
Console >
Return code from command = -1073740940
"Not a properly formed account name"?!?!? What?
MDT will pass the user account credentials to the wdsmcast.exe command using the USERID value.
SO... What is UserID set to?
Property USERID is now = vdl-mdt\helpdesk ZTIGather 7/29/2014 8:27:55 AM 0 (0x0000)
Whoops! UserID should not contain the domain name, instead it should just contain the user name.
USERID=Helpdesk
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Fresh install of Server 2012 R2 causes inaccessible boot device on first Reboot

Hello Everyone,
Doing a fresh install of Windows Server 2012 R2 on a SuperMicro X9DRT-HF+ motherboard based server. The server is using iSCSI boot, setup detects the iSCSI disk and copies its files, finishes the "Getting files ready for installation" "Installing
Updates" phase, reboots, takes a while and eventually gives a Blue screen with Inaccessible Boot Device error. I have tried some changing options in the BIOS, I've had Nimble (storage array) support on the phone and they confirmed the setup is correct
but for some reason after the first reboot Windows can no longer find its install files and gives a BSOD.
Additional Information:
Server: SuperMicro X9DRT-HF+ (no internal disk)
Storage: iSCSI disk provided from Nimble CS220 Array
Windows 2008 R2 Server installation will proceed without any problems.
I checked the \Windows\Panther\Setupact.log / CBS.log file and there doesn't seem to be anything indicating a problem.
I have googled a number of times to find solutions but most articles reference a similar problem after installing a particular KB (which shouldn't be the case here). Need some help :)

Hey Tim,
Thanks for your reply, since the start of this post I have also installed MDT to try a different approach to installing the OS. Using MDT I have injected the Intel I350 driver into the installation so it should be restarting with the driver loaded.
The odd thing is that when the server reboots the Windows startup screen loads for about 4 minutes before it gives the INACCESSIBLE_BOOT_DEVICE error. This would indicate to me that it sees the disk and tries to boot from it but then something goes wrong.
Other than the \Windows\Panther location is there another place I should be looking for log files during this part of the Windows install? I have reviewed all the locations listed under the TechNet library article "hh824819" (I can't post
a link to the article but a google search brings it up) but I can't seem to find a log of when the server crashes what it is doing at that point.

Task Sequence Windows Server 2012 format and partition issue when using MDT2012

Hi all,
Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
attached.
We've configured multiple format and partition disk steps to create the following partition layout:
Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
Disk 1: 40GB Programs
Disk 2: 40GB Data
Disk 3: 25GB User
When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
letter D.
The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
<![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
<![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
type="1" thread="776" file="commandline.cpp:827">
<![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
<![LOG[Diskpart.exe STDOUT:
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: SRV03
Volume 1 is the selected volume.
DiskPart successfully removed the drive letter or mount point.
The volume you selected is not valid or does not exist.
There is no volume selected.
]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
This is the output in the diskpart_script.log file:
select volume D
remove letter=D
select volume D
remove letter=D
select volume E
remove letter=E
select volume F
remove letter=F
select volume H
remove letter=H
select disk 0
select partition 1
assign
select disk 1
select partition 1
assign
select disk 2
select partition 1
assign
select disk 3
select partition 1
assign
It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
all looks ok showing no errors in the smsts.log file.
I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk.
Anyone seen this behavior?

I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?

New Windows Server 2012 install won't boot after installing Hyper-V role.

I have just installed Windows Server 2012 onto a Dell PowerEdge R310. Everything worked okay until I installed the Hyper-V role. After that, when it tries to boot, I get "Your PC ran into a problem and needs to restart. We're just collecting
some error info, and then we'll restart for you. (0% complete)" for a split second, then the system reboots into Automatic Repair mode.
In Automatic Repair mode, my options are Refresh your system (which tells me the drive that Windows is on is locked), Reset your system (which tells me there is no partition), and Automatically Fix your PC (which tells me it can't fix it).
I have updated to the latest version of the BIOS (1.11.0, which Dell states adds Windows Server 2012 support).
I'm at a loss.. I've tried everything I can think of. Has anyone run into this issue and figured out a solution? The only references I can find to this issue talk about Gigabyte motherboards with USB 3.0, but this server pre-dates USB 3.0 by
quite a bit.

Hi,
Not only the BIOS but the iDRAC and storage part also need to ne up date check, have a look at the following list to see what you need for Server 2012:
http://en.community.dell.com/techcenter/os-applications/w/wiki/3868.dell-bios-support-for-windows-server-2012.aspx
If any info was collected during the error then have a look in the event viewer or look for a kernel/memory dump file so you can try to find the issue, in many cases a driver, anti-virus sofware or 3rd part service can cause these kind of issues.
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
MCSE:Server Infrastructure, MCSE:Desktop Infrastructure, MCSA Server 2012, Citrix CCIA & CCEE, Cisco CCNA, VMware VCP 3/4/5 Blog: http://www.citrix-guru.com and http://www.rds-support.eu Twitter: @dnyvandam

DirectAccess Client not connecting without error code on Windows Server 2012 R2 and Windows 8.1

Hello,
we are currently migrating from Windows Server 2012 to 2012 R2 and are not able to get the new Direct Access Service up and running. Our goal is to establish DirectAccess connection for a handful of clients using the IPHTTPS-adapter on the default port 443.
Errors:
There is actually no error showing up. It seems the infrastructure tunnel cannot be created but none of the IPv6-transition adapters is connecting (teredo and 6-to-4 are down) and the IPHTTPs adapter gives no informations about a problem:
>Get-DAConnectionStatus
Status : Error
Substatus : CouldNotContactDirectAccessServer
>Get-NetIPHttpsState
LastErrorCode : 0x0
InterfaceStatus : Failed to connect to the IPHTTPS server; waiting to reconnect
Setup:
Our setup is a virtualized Windows Server 2012 R2 Standard running on Hyper-V. It is located behind a NAT having the Port 443 mapped to the server. The only role installed after the basic install is RRAS including DirectAccess and VPN. The assistants completed
successfully (running the configuration for DirectAccess and VPN). Operation Status says everything is green und working (for multiple days in the meanwhile). A previous direct access installation (on a different machine running Windows Server 2012) has
been removed before installing the new server. The new installation is using a different router, so this might also be the cause of a problem.
The client is a Windows 8.1 notebook located outside the company network accessing the internet through another NAT-device. The client has been able to connect to the previous DirectAccess setup but has never been able to establish a connection after the
setup of the new Direct Access server. The device has no outbound constraints concerning the NAT-device and is only running the integrated Windows Firewall.
Diagnosis:
So far I've done some basic DNS and connectivity checks. The DNS-name can be resolved correctly and the router even responds to pings. The port forward is working and HTTPs connections are generally possible (temporarily routed the port to
access the NLS-Website located on the server, which worked fine).
Network monitor shows that both computers are communicating, traffic on the expected Port 443 is incoming on the server and responses from the server reach the client.
Opening the IPHTTPs-url and in an endless page load. Sometime the browser page closes but I've never seen any result. Using telnet on the port shows that the server is accepting connections. I've even build a small test application that does a GET-Request
on the URL returning HTTP-200 and no content.
I'm currently running out of ideas what to do and since no error occurs this is kind of a bit frustrating. Any help appreciated.
Regards
Matthias

Hi,
In addition, have you disabled the DA client components on the DA client? If no, please also check
the settings on the Name Resolution Policy Table.
More information:
DirectAccess
Client Location Awareness – NRPT Name Resolution
In addition, error 0x4C9 means the remote computer refused the network connection. It may be due to the invalid
registry or corrupt drivers. For more detailed information, please refer to the link below:
Error 1225 - Error Code 0x4C9
Note:
Microsoft is providing this information as a convenience to you. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Best regards,
Susie

Remote Desktop Gateway on Windows Server 2012 R2 and IPAD

Hi guys,
Would love some help with an issue I been struggling for a couple of days now.
I have a RDS 2012 R2 Gateway configured and it works great with all Windows clients both internal and external communication. The problems comes now when my I want to use IPAD
from APPLE. I installed latest RD Client from Microsoft and it works great from the internal network but as soon the device is moved to an external network the client get an error while connecting. Gateway is located in the domain network.
The error is “Failed to parse authorization Challenge”,
This is what I see in the log file from the RD Client.
[2014-Mar-06 16:53:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-06 16:53:49] RDP (0): lo0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-06 16:53:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-06 16:53:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-06 16:53:49] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip0 af=2 (AF_INET) addr=10.25.216.171 netmask=255.255.255.255
[2014-Mar-06 16:53:49] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): pdp_ip4 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): en1 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): ap1 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): en0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): awdl0 af=18 addr= netmask=
[2014-Mar-06 16:53:49] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-06 16:53:49] RDP (0): Not using any proxy
[2014-Mar-06 16:53:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-06 16:53:54] RDP (0): Resolved 'MB-RDS-01.contoso.LOCAL' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-Mar-06 16:53:54] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-06 16:53:54] RDP (0): Final rdp configuration used: {
    activeUsername = " Contoso\\User01";
    arcTimeout = 1800;
    cacheId = 12BF328DD1C8B841;
    certificatesUseRedirectName = 1;
    configurationVersion = 8;
    font = 1;
    gatewayId = F2EE288CD1C8B841;
    gatewayMode = 2;
    gwAutodetectState = kConnectionGwAutodectedForceGW;
    host = "MB-RDS-01.CONTOSO.LOCAL";
    label = "Murbiten - Terminal Server";
    loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.Contoso_-_Termi";
    mouseMode = "-1";
    port = 3389;
    temporary = 1;
    type = rdp;
    useAlt = 0;
    utilityBar = "-1";
    webFeedVersion = "Windows 2008 R2 or newer";
    connections =     (
       F4BF288CD1C8B841,
        12BF328DD1C8B841
    host = "remote.customer.com";
    id = F2EE288CD1C8B841;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
[2014-Mar-06 16:53:54] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Mar-06 16:53:54] RDP (0): lo0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Mar-06 16:53:54] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Mar-06 16:53:54] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Mar-06 16:53:54] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip0 af=2 (AF_INET) addr=10.25.216.171 netmask=255.255.255.255
[2014-Mar-06 16:53:54] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): pdp_ip4 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): en1 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): ap1 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): en0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): awdl0 af=18 addr= netmask=
[2014-Mar-06 16:53:54] RDP (0): --- END INTERFACE LIST ---
[2014-Mar-06 16:53:54] RDP (0): Not using any proxy
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Mar-06 16:53:54] RDP (0): Resolved 'remote.customer.com' to '194.71.11.69' using NameResolveMethod_Unknown(0)
[2014-Mar-06 16:53:54] RDP (0): Resolved 'remote.customer.com' to '194.71.11.69' using NameResolveMethod_Unknown(0)
[2014-Mar-06 16:53:54] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 346
    User Message : Failed to parse authorization Challenge
[2014-Mar-06 16:53:54] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 346
    User Message : Failed to parse authorization Challenge
[2014-Mar-06 16:53:54] RDP (0): Error message: Failed to parse authorization Challenge(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Mar-06 16:53:54] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Mar-06 16:53:54] RDP (0): ------ END ACTIVE CONNECTION ------
en → en
authorization
Adam Bokiniec

Hi Jeremy,
I found a solution, thanks for you effort. The solutions is the following.
First thing that needs to be done is either solution from options below, I did the Solution 1 in my case and added a NPS server to AD. (https://blogs.technet.com/b/networking/archive/2010/01/14/remote-desktop-gateway-client-fails-authentication-with-your-user-account-is-not-authorized-to-access-the-rd-gateway.aspx)
Solution 1
Register the NPS server in Active Directory:
In Server Manager, browse to the following location: Roles\Network Policy and Access Services\NPS (Local).
Right click on the NPS (Local) node and choose Register server in Active Directory.
Click OK to authorize the server when prompted.
Solution 2
Open Active Directory Users and Computers on any Domain Controller of the same domain as the Remote Desktop Gateway.
Add the Computer Name of the Remote Desktop Gateway to the RAS and IAS Servers group.
Situation B
Restart the RDS host and Gateway server.
Secondly and the most important is to configure an alternate address that match your public certificate. My public certificate CNAME is “remote.domain.se”.
All commands need to be run as administrator in PowerShell
To show you current configuration run the following commands:
CollectionName is the Collection Name you created for the RDS deployment.
To get your collection name type
Get-RDSessionCollection
When you got the collection name type
Get-RDSessionCollectionConfiguration -CollectionName "RDS - Terminal Server" | FL *
The default configuration will look like this:
CustomRdpProperty     : use redirection server name:i:1
No to add you public domain name that match the certificate run the following command
Set-RDSessionCollectionConfiguration –CollectionName " RDS - Terminal Server " -CustomRdpProperty "use redirection server name:i:1 `n alternate full address:s:remote.domain.se
Run again to verify your settings
Get-RDSessionCollectionConfiguration -CollectionName "RDS - Terminal Server" | FL *
Now it show look something like this
CustomRdpProperty     : use redirection server name:i:1
                         alternate full address:s:remote.domain.se
IPADs and iPhones can now connect to your environment.
Adam Bokiniec

Direct Access on Windows Server 2012 R2 and IPV6

I have a question about IPV6 and Direct Access in Server 2012 R2. Without using UAG is it still mandatory to have IPV6 enabled in the intranet?
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

Hi,
DirectAccess uses IPv6 with IPsec to create a secure connection between DirectAccess client computers and the internal corporate network.
However, DirectAccess does not necessarily require connectivity to the IPv6 Internet or native IPv6 support on internal networks. Instead, it automatically configures and uses IPv6 transition technologies to tunnel IPv6 traffic across the IPv4 Internet (6to4,
Teredo, IP-HTTPS) and across your IPv4-only intranet (NAT64 or ISATAP).
For detailed information, please view the link below,
Plan the DirectAccess Infrastructure
http://technet.microsoft.com/en-us/library/jj574101.aspx
Hope this helps.
Steven Lee
TechNet Community Support

WDS , Server 2012 R2 and eUFI boot

Similar Messages

Maybe you are looking for