WDS service never starts once DP PXE is enabled

Hi ,
I am facing issues with deploying OS through PXE. WDS stop working (not able to start the services) once I enable PXE point on distribution point. I have observed that RemoteTool\SMSBoot\x64 and x86 folders are empty. Its config manager 2012 R2.
If I remove PXE point, WDS start working again (service start). Any pointers will be appreciated. Thanks
Regards,

Hi,
Please check the following KB.
http://support.microsoft.com/kb/2905002
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

CUCM 8.6.2.20000 Pub & Sub DRF Local never starts when servers started

Anyone ever seen this? I'm running CUCM 8.6.2.20000 in my lab on Esxi5 VM's. Every time I gracefully shutdown the Pub and Sub, and turn them back on (this is a lab, hence the multiple on/offs) both Pub and Sub DRF local services never start. Never. DRF master starts, but not the two locals. I have to manually start them each and every time. Once they are started, no problems.

Hi,
Can you check whether you have any expired CAPF certificates in CUCM OS Admin page --> Security -- > Certificate management. If you do have you can delete the expired certs after confirming that there are valid certs available on the same page. Restart CAPF service after that.
We could also find the exact cause from the DRF local logs
Thanks,
Shenbagarajan

WDS won't start after ConfigMgr R2 upgrade

Hi guys,
After upgrading to R2 recently our Primary Site Server which hosts a DP will no longer PXE. I believe this due to the WDS service not starting. Other DP's are still functioning correctly.
I have done the following to try and resolve:
Applied http://support.microsoft.com/kb/2905002/en-us
Reinstalled wimgapi.msi
Removed and re-added the DP according to this:
http://social.technet.microsoft.com/Forums/en-US/775f96eb-011e-4b91-b9a1-264877a684da/after-upgrade-from-sccm-2012-sp1-cu3-to-sccm-2012-r2-pxe-service-role-crashes-wds-service?forum=configmanagerosd
Ensure that Microsoft Visual C++ 2008 Redistributable is installed
The server is a Windows 2012 VM.
Any suggestions for resolving this would be appreciated.
Regards,
Locust12

When you uninstalled WDS, did you remove RemoteInstall-folder? Also I think it is the best way let confmgr to install WDS. I´ve been fighting with many WDS/PXE problems, and what I´ve learned, that the action order is very important.
If you think you´ve done it ALL twice and you are at endless loop problem solving, you might try to clean your server OS with dism /online clean-image commands, but I really don´t know, is there any other risks what might stop working after that.

Problems with one of the front-end servers (service wont start)

Hi,
Having a pool with two front-end servers (Lync Server 2013 on Windows Server 2012) and I cannot get one of servers to work properly.
The Front-End service is not starting.
Have removed both servers from the topology and installed one at the time. When adding the second server to the pool the service never starts, its in starting state and a bunch of error messages appears:
- Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
- Pool Manager failed to connect to Fabric Pool Manager.
Cause: This could happen because insufficient number of Front-Ends are currently active in the Pool.
I have tried restarted one at the time, both at the same time...
Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery
Reset-CsPoolRegistrarState -ResetType FullReset
I have also had a look at the kb saying that there could be a certificate issue. So I have ran that script but no certificate is misplaced in any store.
I have removed the front-end certificates and requested new ones from the internal CA, I have also done the same to the OAuth certificates.
How to proceed?

Hi there,
if you are still receiving, the same error, please try to shutdown the first Front-End Server, and give time for the services to start, however I would like also to add that with Lync server 2013 the Enterprise pool requirements is to have 3 Front-End Servers
in a pool instead of 2, because of introducing the brick model architecture.
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Samba never starts with Boot?

Greetings to all.
Just an annoying problem I've noticed with my Quad, running 10.4.7 MOSX Server. Server was installed after the Quad had 10.4.2 installed via the restore disks using the post-install method package.
Samba/Windows Services never starts up on boot.
Serveradmin shows that the service is stopped.
Starting it via Serveradmin works just fine- no errors. Nothing in the logs ether.
Samba remains running until I reboot or poweroff the machine. It doesn't auto-launch like the rest of my services do under Serveradmin- I've got to start the bugger manually each time.
It's sort of annoying- just a quirk. I use VPN via the machine often, and sometimes Samba isn't running because I forgot to launch it when I've rebooted the machine, and it usually makes me stop for a minute and think something along the lines of "wth?".
Cheers,
-S'Captain

i tried to start mine too see if you could but without tsking it spasrt or casing damage im afrsid you need to just take it basck. excuse my tpos o need a better keyvboasrd.

WDS service will not start

this is a server 2008 sp2 and WDS roles was added after sp2 it worked at first but then just stoped working
i restarted the service and it just times out and refues to start
the DCHP is on another server
i have
wdsutil /uninitialize-server
wdsutil /initialize-server /reminst:D:\REMOTEINSTALL
makes no diffrance
have uninstalled and reinstalld and this makes no diffrance
in the events every time i try to start the service i get
257
an error occured while trying to start the windows seployment services server.
error information: 0x5
513
an error occured while trying to initalize provider WDSPXE from c:\windows\system32\wdspxe.dll. windows seployment server will be shutdown.
error information 0x5
265
An error occured while trying to initalize provider BINSVC. since the provider is makerd as
critical the windows deployment services server will be shutdown.
error information 0x5
261
an error occured while trying to inisalize provider BINLSVC loaded from C:\windows\system32\binlsvc.dll. if the provider is maked as critical the windows deployment services server will be shutdown.
error information 0x5
1811
an error occured while checking for exsitence or creation of service control point for BINLSVC provider
error information 0X5
below is the trace log i got just after reinstalling the service so there where no images attached but i was unable to start the service by command line or via the management consol
[2072] 08:50:51: WDS Diagnostics Initialized
[2072] 08:50:51: [Profiles] Initialized.
[2072] 08:50:51: [MCSCOPE] Address Range=239.0.0.1-239.0.0.254, Count=254
[2072] 08:50:51: [UDPPorts] Dynamic Port Range: 64001-65000.
[2072] 08:50:51: [RPC] Using Tcp Port 5040 for Rpc Calls.
[2072] 08:50:51: [RPC] Client Impersonation Logging=Disabled
[2072] 08:50:51: [RPC] Host Name: FBK-SR-GLaDOS.fullbrook.internal
[2072] 08:50:51: [RPC] NTLM/Kerberos Spn: ldap/FBK-SR-GLaDOS.fullbrook.internal
[2072] 08:50:51: [RPC] Initialized
[600] 08:50:51: [RPC] Server Started.
[2072] 08:50:52: WDS VSS Writer Pre-Initialized
[2072] 08:50:52: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[2072] 08:50:52: [BINLSVC] Provider Initialized.
[2072] 08:50:52: [296][WdsImgSrv] -> Initialize
[2072] 08:50:52: [312][WdsImgSrv] -> pInitializeManagement
[2072] 08:50:52: [406][WdsImgSrv] <- pInitializeManagement=0
[2072] 08:50:52: [406][WdsImgSrv] -> pWdsImgSrvRefreshSettings
[2072] 08:50:52: [562][WdsImgSrv] <- pWdsImgSrvRefreshSettings=0
[2072] 08:50:52: [WdsImgSrv][RPC][Ep={D8DEEB5A-EFFD-43B2-99FC-1A8A5921C227}] Registered
[2072] 08:50:52: [562][WdsImgSrv] <- Initialize=0
[2072] 08:50:52: [WdsImgSrv] Provider Initialized.
[2072] 08:50:52: [WDSMC][RPC][Ep={865BCE30-ACF1-410C-B5ED-142096663914}] Registered
[2072] 08:50:52: [WDSMC][RPC][Ep={6F13A317-3687-4B54-81A5-504DAA9062FA}] Registered
[2072] 08:50:52: [WDSMC] Provider Initialized.
[2072] 08:50:52: [1125][WDSPXE] -> CBannedGuids::Initialize
[2072] 08:50:52: [1125][WDSPXE] -> CBannedGuids::Shutdown
[2072] 08:50:52: [1125][WDSPXE] <- CBannedGuids::Shutdown=0
[2072] 08:50:52: [1125][WDSPXE] <- CBannedGuids::Initialize=0
[2072] 08:50:52: [1125][WDSPXE] [BINLSVC] GetDSSServer: Domain=
[2072] 08:50:52: [1125][WDSPXE] [BINLSVC] GetDSServer: Ldap Server=FBK-SR-001.fullbrook.internal
[2072] 08:50:52: [1125][WDSPXE] [BINLSVC] CLdap::Open: Server=FBK-SR-001.fullbrook.internal, Port=389, DN=
[2072] 08:50:52: [1125][WDSPXE] [BINLSVC] GetDSSServer: Domain=fullbrook.internal
[2072] 08:50:52: [1125][WDSPXE] [BINLSVC] GetDSServer: Ldap Server=FBK-SR-001.fullbrook.internal
[2072] 08:50:52: [1125][WDSPXE] [BINLSVC] CLdap::Open: Server=FBK-SR-001.fullbrook.internal, Port=389, DN=
[2072] 08:50:52: [1203][WDSPXE] [BINLSVC] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\binlsvc\binlprovider.cpp:151] Expression: , hr=2147942405 (0x80070005)
[2072] 08:50:52: [1203][WDSPXE] [BINLSVC] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\binlsvc\pxeprovider.cpp:124] Expression: , Win32 Error=5
[2072] 08:50:52: [1203][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxeprov.cpp:172] Expression: , Win32 Error=5
[2072] 08:50:52: [1203][WDSPXE] [BINLSVC] Initialization failed (rc=5)
[2072] 08:50:52: [1203][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxeprovhdl.cpp:481] Expression: , Win32 Error=5
[2072] 08:50:52: [1203][WDSPXE] -> CBannedGuids::Shutdown
[2072] 08:50:52: [1203][WDSPXE] <- CBannedGuids::Shutdown=0
[2072] 08:50:52: [1203][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxeprovhdl.cpp:598] Expression: , Win32 Error=5
[2072] 08:50:52: [1203][WDSPXE] [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\wdspxe\src\pxemain.cpp:201] Expression: , Win32 Error=5
[2072] 08:50:52: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:147] Expression: , Win32 Error=5
[2072] 08:50:52: [WDSPXE] Initialization Failed (rc=5)
[2072] 08:50:52: [1203][WDSPXE] -> CBannedGuids::Shutdown
[2072] 08:50:52: [1203][WDSPXE] <- CBannedGuids::Shutdown=0
[2072] 08:50:52: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:169] Expression: , Win32 Error=5
[2072] 08:50:52: [WDSPXE] Deleted.
[2072] 08:50:52: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:177] Expression: , Win32 Error=5
[2072] 08:50:52: [Udp] Listen Shutdown.
[600] 08:50:52: [RPC] Server terminated (rc=0)
[2072] 08:50:52: [RPC] Listen Stopped.
[2176] 08:50:52: [NetMon] Network Interface(s) Change Notification
[2072] 08:50:52: [BINLSVC] Shutting down
[2072] 08:50:52: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[2072] 08:50:52: -> CBannedGuids::Shutdown
[2072] 08:50:52: <- CBannedGuids::Shutdown=0
[2072] 08:50:52: -> CBannedGuids::Shutdown
[2072] 08:50:52: <- CBannedGuids::Shutdown=0
[2072] 08:50:52: [BINLSVC] Deleted.
[2072] 08:50:52: [WdsImgSrv] Shutting down
[2072] 08:50:52: [1218][WdsImgSrv] -> Shutdown
[2072] 08:50:52: [WdsImgSrv][RPC][Ep={D8DEEB5A-EFFD-43B2-99FC-1A8A5921C227}] Closed
[2072] 08:50:52: [1218][WdsImgSrv] <- Shutdown=0
[2072] 08:50:52: [WdsImgSrv] Deleted.
[2072] 08:50:52: [WDSMC] Shutting down
[2072] 08:50:52: [WDSMC][RPC][Ep={865BCE30-ACF1-410C-B5ED-142096663914}] Closed
[2072] 08:50:52: [WDSMC][RPC][Ep={6F13A317-3687-4B54-81A5-504DAA9062FA}] Closed
[2072] 08:50:52: [WDSMC] Deleted.
[2072] 08:50:52: [d:\longhorn\base\ntsetup\opktools\wds\wdssrv\server\src\ifmonitor.cpp:174] Expression: , Return Value=1 (WSLE=10038)
[2072] 08:50:52: Timer Queue deleted successfully.
[2072] 08:50:52: WDS Vss Writer Shutdown
[2072] 08:50:52: WDS Diagnostics Shutdown
i have added images back but it makes no diffance
in the registry
HKLM>control>services>SDSserver>Providers>WDSPXE
iscritical=1 if i change this to 0 then the service will start but it is not loading the pxe provider
the REMOTEINSTALL folder as the secrity setting that it should
if i turn off the firewall it makes no diffrance
AD rights are inplace for the server
GPO for DNS is there in the AD
i have read alot of info but now seem to be going in circles, has any one got any ideas on what i should try next

Hi,
Please refer to the following articles:
http://technet.microsoft.com/en-us/library/cc726736(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc726644(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc726729(WS.10).aspx
http://technet.microsoft.com/en-us/library/cc726735(WS.10).aspx
Tim Quan - MSFT

WDS service will not start Windows Server 2012 R2 with Update

Greetings,
After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
Any suggestions? Am I missing a Win-PE boot Image? Should I do something else?
Please assist,
Bob Hessenauer

All,
The problem was a conflict between DHCP and WDS. Followed the instructions in this article and all is now fine:
https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
Just so you know,
Bob Hessenauer

Windows 2008 R2 WDS service is not start.

Hi,
Windows 2008 R2 WDS service is not start.
I am facing the below error on it.
Please help to resolve.
-Thanks
Ashish Dubey

Hi Ashish,
Before going further, we can open Event Viewer to see whether some related error events were logged.
For now, we can refer to the article and thread below to troubleshoot the issue.
Microsoft WDS Error "the service did not respond to the start or control request in a timely fashion
http://linkdottech.wordpress.com/2011/12/04/microsoft-wds-error-the-service-did-not-respond-to-the-star-or-control-request-in-a-timely-fashion/
Please Note: Since the web site is not hosted by Microsoft, the link may
change without notice. Microsoft does not guarantee the accuracy of this information.
Windows Deployment Services Error: The service did not respond to the start or control request in a timely fashion.
http://social.technet.microsoft.com/Forums/en-US/5f71f652-ac73-4290-817e-5a251b7852b4/windows-deployment-services-error-the-service-did-not-respond-to-the-start-or-control-request-in-a?forum=winservergen
Besides, if the server has more than 20 logical processors, the Windows Deployment Service cannot be started and we apply the hotfix in the following article to fix
the issue.
The Windows Deployment Service cannot be started on a computer that has more than 20 logical processors and that is running Windows Server 2008 R2 or Windows Server
2008
http://support.microsoft.com/kb/2121690/en-us
Best regards,
Frank Shen

WDS Service failed to run

Hi All,
In lab environment, I have DHCP, DNS, ADDS , SQL Server and SCCM 2012 on one box (physical machine not virtual).
Whenever I enable PXE, WDS service failed to start. What I have done so far to disabled the PXE >Reboot >Delete RemoteInstall >Delete Windows\temp directory >Reboot >Enabled PXE >Reboot >Test >Failed
This failed or didn't helped either:
wdsutil /set-Server /UseDhcpPorts:No
Any thoughts?
N.A.Malik

Hi,
Just tried that link, it works. You need send hotfix request by sending e-mail. Here is what I have received:
Before you install this hotfix
If you decide to install this hotfix, please note the following items:
Do not deploy a hotfix in a production environment without first testing the hotfix.
Back up the system or the computer that will receive the hotfix before you install the hotfix.
Additional hotfix information
NOTE For your convenience, we send the hotfix location to you in a hyperlink. To connect to this hotfix location, you can click the hyperlink in the "Location" field that is listed in the table at the end of this e-mail
message to have your Web browser open that location. However, sometimes e-mail program settings disable hyperlinks. If the hyperlink in this e-mail message is disabled, please copy the hyperlink in the "Location" field and then pastes it into the
address box of your Web browser. Make sure that you include the exact text (without spaces) between the parentheses in the http:// address.
Package:
KB Article Number(s): 3026739
Language: English
Platform: x64
Location: (http://hotfixv4.microsoft.com/ConfigMgrV5/nosp/ConfigMgr_2012_R2_CU4_KB3026739_ENU/05.00.7958.1501/free/482009_ENU_x64_zip.exe)
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

WDS won't start

Ran into an issue were WDS wouldn't start, so I found a page recommending a uninitialize/reinitialize.
The first half worked, but when I try the second half:
C:\Windows\system32>wdsutil /initialize-server /reminst:E:\RemoteInstall
Windows Deployment Services Management Utility [Version 6.3.9600.16384]
c 2013 Microsoft Corporation. All rights reserved.
An error occurred while trying to execute the command.
Error Code: 0x7B
Error Description: The filename, directory name, or volume label syntax is incorrect.
This topic first appeared in the Spiceworks Community

When you uninstalled WDS, did you remove RemoteInstall-folder? Also I think it is the best way let confmgr to install WDS. I´ve been fighting with many WDS/PXE problems, and what I´ve learned, that the action order is very important.
If you think you´ve done it ALL twice and you are at endless loop problem solving, you might try to clean your server OS with dism /online clean-image commands, but I really don´t know, is there any other risks what might stop working after that.

Trying to create a service that starts at boot

People,
I'm trying to create a service that will start at boot (in single-user mode, actually). I am up and running but I do NOT want to run the service now. I only want to run the service when the machine reboots.
I've been rummaging around all day trying to figure this out but I'm stuck. I can create a service that runs. I can create an XML file in /var/svc/manifest/site/patch-install.xml that will be read when I boot- because after I boot, I can list the service:
svcs -a | grep patch
disabled       18:23:23 svc:/site/patch-install:defaultI have inserted the following in my xml:
<create_default_instance enabled='true' />and also
<create_default_instance enabled='false' />but it makes no difference. Anyone have any idea? What is the purpose of create_default_instance? I don't understand; item 9 on http://www.sun.com/bigadmin/content/selfheal/sdev_intro.html seems rather opaque to me.
Also, what exactly is the purpose of /var/svc/profile/ ? I tried putting some code to enable my xml but it didn't do anything. Just wondering if this might fit into the picture.
BTW, I do not want the login prompt to appear until my method is complete.
Thanks.
-mschwage
Here fyi is my /var/svc/manifest/site/patch-install.xml file:
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
<service_bundle type='manifest' name='Patches:patch-install'>
<service
        name='site/patch-install'
        type='service'
        version='1'>
        <create_default_instance enabled='false' />
        <single_instance />
        <dependent
                name='patch-install_single-user'
                grouping='require_all'
                restart_on='none'>
                <service_fmri value='svc:/milestone/single-user' />
        </dependent>
        <exec_method
                type='method'
                name='start'
                exec='/var/tmp/S92delay'
                timeout_seconds='86400' />
        <exec_method
                type='method'
                name='stop'
                exec=':true'
                timeout_seconds='0' />
        <property_group name='startd' type='framework'>
                <propval name='duration' type='astring' value='transient' />
        </property_group>
        <stability value='External' />
        <template>
                <common_name>
                        <loctext xml:lang='C'>
                        Install patchset upon boot.
                        </loctext>
                </common_name>
        </template>
</service>
</service_bundle>

Hushpuppy wrote:
People,
I'm trying to create a service that will start at boot (in single-user mode, actually). I am up and running but I do NOT want to run the service now. I only want to run the service when the machine reboots.I'd probably create the service now (by importing the manifest manually rather than waiting for the reboot), then set general/enabled in the default instance to be be true with svcprop. That should tell it to start at boot, but not enable it immediately.
I've been rummaging around all day trying to figure this out but I'm stuck. I can create a service that runs. I can create an XML file in /var/svc/manifest/site/patch-install.xml that will be read when I boot- because after I boot, I can list the service:Yes, that's the default. Or you can load it immediately to create the service now.
# svccfg import patch-install.xml
I have inserted the following in my xml:
<create_default_instance enabled='true' />and also
<create_default_instance enabled='false' />but it makes no difference. Anyone have any idea? What is the purpose of create_default_instance? I don't understand; item 9 on http://www.sun.com/bigadmin/content/selfheal/sdev_intro.html seems rather opaque to me.There's a difference between a "service" like network/smtp or console-login and an "instance" like network/smtp:sendmail or console-login:default. In most cases, you just want a single "default" instance of your service. The above line sets the default instance 'enabled' property to true or false. When I import your manifest as is, the service comes in as 'disabled'. If I set it to true, it comes in as 'maintenance' (almost certainly because it was enabled, tried to start, and couldn't find the start method on my machine).
Also, what exactly is the purpose of /var/svc/profile/ ? I tried putting some code to enable my xml but it didn't do anything. Just wondering if this might fit into the picture.'profiles' are loaded exactly once, and they are mainly used to set certain services to enabled or disabled.
3 of them are loaded if present, platform.xml, generic.xml, and site.xml. The last is not generated by the OS, but left for you to use. But it's usually only useful as a "first boot" type thing. Because if you make changes to it, it will not be reread. This isn't usually a problem because after first boot you're in control of the services. The usual thing is that at first boot the manifests load to create services, then the profiles are loaded to set then enabled or disabled. This isn't possible before that point because there's no service to modify yet.
BTW, I do not want the login prompt to appear until my method is complete.Any login prompt like a network login, or only the console login prompt? If the latter, then you'll want a dependency so that system-console-login depends on your service. But if your service has a problem at boot time, you'd make it difficult to log in.
Darren

Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

Hi everyone,
Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
The main problems are as follows:
There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
Service.
The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long... It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
I receive an error in the Event Log regarding RPC over HTTP Proxy
to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
this post
The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
for over chatty warnings about disk space (the warning is that we have loads of space...)
This is a brief outline of the environment:
Exchange 2007 SP3 RU13
UK - Two physical locations in a stretch LAN (100Mb WAN)
4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
2 x Virtual Windows 2003 R2 - Hub Transport Servers
2 x Virtual Windows 2003 R2 - Client Access Servers
1 x Virtual Windows 2003 R2 - Unified Messaging Server
1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
US - One physical location
1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
Exchange 2013 CU5
UK - Installed into same site along side Exchange 2007 servers
1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
Problem 2 Error Message - Please note, server names and domain name changed:
Log Name:      Application
Source:        MSExchange Front End HTTP Proxy
Date:          18/07/2014 10:00:37
Event ID:      3005
Task Category: Core
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EXC2013.domain.local
Description:
[RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
Event Xml:
<Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
<System>
    <Provider Name="MSExchange Front End HTTP Proxy" />
    <EventID Qualifiers="32768">3005</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
    <EventRecordID>64832</EventRecordID>
    <Channel>Application</Channel>
    <Computer>EXC2013.domain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>RpcHttp</Data>
    <Data>EXC2007CAS1.domain.local</Data>
    <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
    <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
</EventData>
</Event>

Hi Off2work,
I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
I will see if UM drops out of that list once I've configured it shortly
Thanks for taking the time to respond (and that goes to DareDevil too)

Generic object services (GOS) - Start workflow box is allways empty

Dear colleagues,
i have installed a brand new IDES ERP 6.0 successfully but when entering a number of standard transactions like mm02, va03, fb03 etc and trying to execute the GOS toolbox, I can never start any workflow. I click on the 'start workflow' button of the GOS-toolboy but the selection box is allways empty. Did I miss anything? Since there are so many BOR objects that apply to the objects of the standard transactions, there should be at least something to start. For example BOR BUS1001 (material master): When in MM02, why does the GOS-toolbox for workflows not show the related workflows that use BUS1001?
Thank you very much for your answers
Best regards
Daniel

Udo,
You should start a new discussion - you'll get more responses.
Anyhoo, to make a workflow appear in the GOS 'start workflow' list, just follow these simple rules:
- confirm which BOR object is involved in your transaction (eg BUS1001006 for MM03)
- make sure that the BOR object is a mandatory input of your workflow
- make sure that there are no other mandatory inputs
- make sure that the workflow (WS*) is set to 'General Task' (nb this is client dependent)
Once all these things are done, refresh the buffer (SWU_OBUF) and it should work.
cheers
Paul

SQL Server Reporting Services not starting automatically

Hi,
I have Reporting Services configured on my SharePoint 2010 Foundation server and the service is set to start automatically under a domain account. However, the service does not in fact start automatically and requires me to manually start it otherwise when
I try to use SharePoint to read some Reports, it doesn't work. Once I start the service, it works.
Is this normal behaviour? The service will remain started until the server is restarted (Windows Updates for example). I would like the service to start automatically when needed i.e. requesting to read a Report on SharePoint site.
Many thanks

Service should start automatic then, are you using some third party firewall that could block service?
And if you are using domain account for service, make sure it has log on as a service rights on local machine.
What is your event viewer saying?
In our domain environment we had similar problem with SQL and SSRS service, when I changed form of account for starting service from
domain\account to account@domain, problem was solved. I still don't really know how this helped.

NW2004s Sneak Preview Java install never starts up

I've installed NW2004s Sneak Preview Java on Windows XP Media Centre Edition with 2Gb RAM and 8Gb swapfile but the server never finished starting up properly.
I've tried with JSDK 1.4.2_09, _11, _12 and with the recommended Sun JDK parameters but always the same problem.
The MMC reports the server has started up completely, with all green icons, but when I open a browser and point at http://localhost:50100/irj or anything else I get a 503 Service Unavailable or 503 The Application Is Currently Stopped errors.
The CPU usage of the J2E service processes keep chugging away at about 70% CPU utilisation, and I left it going for 24hrs but it never finishes.
There dont seem to be any errors in the logs that indicate why it doesnt finish starting up.
Has anyone managed to do an install on XP Media Centre Edition, or any version of XP?
Any suggestions?
Steve

Rich,
Thanks for the reply. I still get the same problem. MMC reports SDM, Server0 and Dispatcher all running, and http://localhost:50100/index.html gives:
503   Service Unavailable SAP J2EE Engine/7.00
Cannot process a request for dynamic resources.
Details:   Web Container service is currently unavailable.
fter another 10 mins or so the error message is:
503   Service Unavailable   SAP J2EE Engine/7.00
Application stopped.
Details:   You have requested an application that is currently stopped
There are now a few hundred error messages in defaulttrace, which indicate 70 services failed, although it doesnt explain why. This is the first error in defaultTrace while starting:
Date : 07/04/2006
Time : 14:19:59:781
Message : Tue Jul 04 14:19:59 BST 2006 Thread[Thread-1] initiated a full thread dump due to: Timed out services:
Service com.sap.portal.prt.sapj2ee > hard reference to service adminadapter.
Service naming > hard reference to interface log.
Service connector > hard reference to service naming.
Service com.adobe~DataManagerService > hard reference to service iiop.
Service com.adobe~TrustManagerService > hard reference to service iiop.
Service ejb > hard reference to service connector.
Service cafumrelgroups~imp > hard reference to service naming.
Service webservices > hard reference to interface naming.
Service developmentserver > hard reference to interface naming.
Service ssl > hard reference to service keystore.
Service prtbridge > hard reference to service jmx.
Service com.adobe~PDFManipulation > hard reference to service iiop.
Service adminadapter > hard reference to service jmx.
Service tcsecsecurestorage~service > hard reference to service naming.
Service cafeuer~service > hard reference to service applocking.
Service jmsconnector > hard reference to service naming.
Service pmi > hard reference to service tcsecdestinations~service.
Service com.sap.portal.pcd.gl > hard reference to service jmx.
Service MigrationService > hard reference to interface container.
Service security > hard reference to service com.sap.security.core.ume.service.
Service licensing > hard reference to service ts.
Service jms_provider > hard reference to service security.
Service sld > hard reference to service locking.
Service jmx > hard reference to interface security.
Service DQE > hard reference to service jms_provider.
Service rfcengine > hard reference to service ejb.
Service tceujwfuiwizsvc > hard reference to service cafeugp~model.
Service tcsecsaml~service > hard reference to service adminadapter.
Service com.adobe~LicenseService > hard reference to service naming.
Service com.adobe~DocumentServicesConfiguration > hard reference to service naming.
Service telnet > hard reference to service shell.
Service deploy > service deploy start method invoked.
Service locking > hard reference to interface log.
Service cafeuodimnuacc > service cafeuodimnuacc start method invoked.
Service failover > hard reference to interface naming.
Service com.adobe~DocumentServicesDestProtoService > hard reference to service naming.
Service webdynpro > hard reference to interface naming.
Service cafeugpmodel > hard reference to service tcsecsecurestorageservice.
Service cafummetadata~imp > hard reference to service applocking.
Service cafeugpmailcf > hard reference to service naming.
Service tcsecvsiservice > hard reference to service tcsecdestinationsservice.
Service tceCATTPingservice > hard reference to interface naming.
Service ts > hard reference to service naming.
Service tcsecdestinationsservice > hard reference to service tcsecsecurestorageservice.
Service dsr > hard reference to service security.
Service keystore > hard reference to service security.
Service applocking > hard reference to service ts.
Service monitor > hard reference to service jmx.
Service com.sap.security.core.ume.service > hard reference to service dbpool.
Service http > hard reference to interface log.
Service cafruntimeconnectivityimpl > service cafruntimeconnectivityimpl start method invoked.
Service CUL > hard reference to service jmx.
Service tc.monitoring.logviewer > hard reference to service jmx.
Service tc.CBS.Service > hard reference to service dbpool.
Service apptracing > hard reference to service deploy.
Service com.adobe~XMLFormService > hard reference to service naming.
Service shell > hard reference to interface security.
Service tcsecwssecservice > hard reference to service tcsecsecurestorageservice.
Service servlet_jsp > hard reference to service naming.
Service com.adobe~FontManagerService > hard reference to service iiop.
Service iiop > hard reference to service ts.
Service bimmrdeployer > hard reference to interface container.
Service classload > hard reference to service security.
Service com.adobe~DocumentServicesLicenseSupportService > hard reference to service naming.
Service log_configurator > service log_configurator start method invoked.
Service com.adobe~DocumentServicesBinaries2 > hard reference to service naming.
Service configuration > hard reference to interface log.
Service basicadmin > hard reference to service jmx.
Service dbpool > hard reference to service connector.
Service appclient > hard reference to service naming.
Severity : Error
Category : /System
Location : com.sap.engine.frame.Environment
Application :
Thread : Thread[Thread-1,5,main]
Datasource : 1152021720729:D:\usr\sap\J2E\JC01\j2ee\cluster\server0\log\defaultTrace.0.trc
Message ID : 02004C4F4F5000000000001600000E38000417C15F2CAABB
Source Name : com.sap.engine.frame.Environment
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction :
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives : /System
Resource Bundlename :
Session :
Source : com.sap.engine.frame.Environment
ThreadObject : Thread[Thread-1,5,main]
Transaction :
User :
Steve

WDS service never starts once DP PXE is enabled

Similar Messages

Maybe you are looking for