WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?

Hi,
WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?
-I have an SCCM 2012 SP1 site on Windows server 2008 R2.
-I have an HP ElitePAD 900 with Atom x86 processor, and I have some problem to deploy an OSD image to the ElitePAD.
Do I need WDS on an Server 2012 to get PXE x86 UEFI support with KB2817245?
http://support.microsoft.com/kb/2817245/en-us
/Per Sai
/SaiTech

Is this why I get this error with 2008R2?
Windows failed to start. A recent hardware or software change might be the cause. To fix it... <blahblah>
File:\Windows\System32\boot\winload.efi
Status: 0xc0000359
Thanks,
Jason

Similar Messages

Windows Server 2008 R2 & Network speed

Today my server went slow. I've expreienced, that the network speed is very slow, and the average speed is around 200-500mpbs which is fine. Anyways from outside, the server is annoying slow, and speedtest.net shows quite good speed.
The game server is slow, website is slow, remote desktop connection, and the whole server is just slow, even the CPU usage is 0%, and RAM is around 9%
Specs: x4 Intel(R) Xeon(R) CPU X5355 @ 2.66GHz OS: Microsoft Windows Server 2008 R2 Standard 32GB DDR3 RAM
I'm running an MMORPG server on it. And I've never experienced such thing. I'm working with Windows Servers since 3 years.
I'm clueless now, and I don't know what's causing this annoying network issue. Do you have any ideas how to solve it?
Thanks.

Hi,
I don't think if there's any problem with my disk.
The whole system went slow, for example, now, my site takes around 30 secs to load, and before when I had no problems, it took max. 1 second.
Try out: http://4story.hitlan.net/index.php
Remote desktop, and the whole gameserver running on it are also slow. But there's 0% CPU usage:
http://i.imgur.com/ITzYGW7.png
The disk is also okay: http://i.imgur.com/jqyM5OR.png
If I ping the server, the average answer time is 62ms which is not the best, considering, that the server is located far away from me, it's OK.
I've asked the sponsor of my game server, and they says they doesn't see any problem.
And the most weird thing, that if I do a speedtest, it shows me around 200-400mpbs download speed, and the same upload speed.
I can't understand it how could it happen. Before everything was fast, and yesterday everything became slow. And not for only me, for everyone.
I really don't understand how it could happen, everything was fast, before, now everything went slow.

Windows Server 2008 R2 Network Unauthenticated

Hi all,
So I have an odd problem. Wanted to see if anyone had any ideas. I have a client network that has Three locations. HQ, Branch 1 and Branch 2. All connected over IPSEC VPN Tunnels.
Each Branch Office has 1 domain controller. The HQ location has 1 DC and 1 Exchange server.
All of a sudden I noted the network Connection on the HQ DC had gone to unauthenticated. I worked on the issue and tried many different things to get it out of this state. Removed Nic Card drivers, reboots, Reset TCP Stack and Winsock Stack, changed Adaptors.
Just several different things I could think of and things I found. Nothing...
So next, This DC has all the FSMO Masters, so I transferred them to one of the branch servers and then demoted this DC. After the demotion, it rebooted and Unauthenticated was gone. Back to the Domain connection normal. I thought Great! So I ran DCPROMO
again and once it installed AD, and rebooted, Back to Unauthenticated again....
So Next, I removed AD again and this time I waited. Changed the other two DC's to look at the other. I unjoined the HQ Server. Then I went through DNS and removed all record of this server.
Next .. I rejoined the server. Network was good. Then ran DCpromo, and back to unauthenticated again.
Everything seems to work ok so far, but I am still worried about it as it should not be happening.
Any Ideas about this from anyone ?
Thanks for your help!

Hi Chris,
Sorry for the delay.
Due to these servers are connected by VPN and Kerberos uses connectionless UDP datagram packets, these UDP packets may be dropped.
We can change MaxPacketSize to 1 to force the clients to use Kerberos traffic over TCP.
To do this, follow these steps:
Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.
Start Registry Editor.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\ Kerberos\Parameters
Note If the Parameters key does not exist, create it now.
On the Edit menu, point to New, and then click
DWORD Value.
Type MaxPacketSize, and then press ENTER.
Double-click MaxPacketSize, type 1 in the
Value data box, click to select the Decimal option, and then click OK.
Quit Registry Editor.
Restart your computer.
For detailed information, please click the link below,
How to force Kerberos to use TCP instead of UDP in Windows
http://support.microsoft.com/kb/244474/en-us
If issue persist, please try to run netlogon in debug mode. The debug log may give some hints.
For detailed information, please refer to the link below,
Enabling debug logging for the Net Logon service
http://support.microsoft.com/kb/109626/en-us
Best Regards.
Steven Lee
TechNet Community Support

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Running oracle database xe (express edition) on windows server 2008 r2

Is it supported to run Oracle Database XE on Windows Server 2008 R2?
Database XE is only supported as 32-bit. Current builds of Windows Server 2008 only come in x64 configurations.
Here are the Database XE system requirements for windows:
[http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm]
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).
See:
- [Wikipedia page about windows server 2008 with info on R2|http://en.wikipedia.org/wiki/Windows_Server_2008#Windows_Server_2008_R2]
- [Wikipedia page on "windows 32-bit on windows 64-bit"|http://en.wikipedia.org/wiki/WOW64]
Thanks,
Matt

Hello Matt,
Is it supported to run Oracle Database XE on Windows Server 2008 R2?No.
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.So this means that only 32bit versions of 2008 will be supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).Which is probably why 2008 R2 is not supported.
You can either take the VM approach and install a 32 bit Windows or 64 bit Linux host, or you can queue in the list of persons waiting for a 64 bit Windows release. See the following thread for details (and the queue) for the latter: {thread:id=2277728}
-Udo

BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice.

Regarding crystal report runninv problem in windows server 2008

My name raja gupta.i want to clarify my issue.I used crystal reports 2005(10.0 version).I am accesing that reports in windows server 2008(64 bit) operating system.But i am unable to see the reports,reports was not working and not opened.Give me reply asap.
Thanks & Regards,
Raja.

I would advise to check if windows server 2008(64 bit) is listed as a supported platform.
If you need urgent support, you can always contact Customer Interaction Center (CIC) and purchase a Single Support Case.
The CIC contact information you can find in the following SAP note:
Note 560499 - Global Support Customer Interaction: Telephone/fax/e-mail
u2026.
Business Objects customers:
Contact information for Business Objects # new support telephone numbers, all numbers available 24 hours 7 days a week
If the toll-free telephone number listed below is not available for your Customer Interaction Center or Support Advisory Center, call the following emergency numbers:
- EMEA Region:                                  +353 91 404395
- North and Latin America Region:               +54 11 5129 3717
- China, Hong Kong, Japan, South Korea
Singapore, Taiwan:                              +86 411 3963 1129
- Malaysia, Philippines, Thailand:               +91 80 4139 9216
- Australia, New Zealand:                        +61 2 9935 4660
America
CIC & SAC Center     Contact information
USA     T: 1 866 8907686 (toll-free)
     E: [email protected]
Canada     T: 1,866 6603577 (toll-free)
     E: [email protected]
APJ
CIC & SAC Center     Contact information
Australia     T: 1800 081 923 (toll-free)
     E: [email protected]
China CNC     T: 10800 7490097 (toll-free)
     E: [email protected]
China Telekom     T: 10800 4900088 (toll-free)
     E: [email protected]
Hong Kong     T: 800 964 865(toll-free) or +852 25391948
     E: [email protected]
India     T: + 91 80 4139 9217
     E: [email protected]
u2026

Using drag and drop in remote desktop on windows server 2008

we running an application on windows server 2008 terminal services .. this application was support drag and drop functionality .. i understand that terminal services on windows 2008 is supported to drag and drop but is not happening !! even when i run remote desktop connection on this server the drag and the drop is not working !
i need to enable the drag and drop for windows 2008 terminal services ..
Thanks in advance

Hello Ayman,
If your requirement is to drag and drop files between local and remote sessions, Danny is right. Drag-and-drop feature is not supported in Windows Server 2008-based Terminal Server, which is a by-design behavior hard-coded in the current version of the Remote Desktop Protocol.
As a workaround, I recommend you to use copy-and-paste function instead of drag-and-drop. To enable the copy-and-paste between local and remote session, please enable the clipboard redirection in Windows Server 2008-based RDC. (In Windows Server 2003 environment, local drive redirection is needed.)
Hope it helps. Thanks.
Best Regards,
Lionel Chen

BPC 7.0 on Windows Server 2008

Ok, so I've read that SAP does not support BPC 7.0 on Windows Server 2008. However, BPC 7.5 will support Server 2008. Are there any plans in making BPC 7.0 compatible with 2008? I ask this because of support conerns with Windows Server 2003. I fear Server 2003 will lose support from Microsoft before BPC 7.0 loses support from SAP. Please advise.
Also, if Windows Server 2003 is required, can it be the 64-bit Standard Edition, or does it need to be Enterprise? If so, why?

Hi Nathan,
It is a plan to provide support for Windows 2008 and also Windows 7 for BPC client.
I cannot share with you any date but until end of the year it will be provided a patch for SP7 providing support for 2 platform mentioned.
SAP BPC application server 7.0 doesn't support 64 bits and it is no plan for support 64 bits.
For SAP BPC database server you can use Windows 2003 64 bits Standard Edition.
Regarding SE or EE for Windows SAP BPC doesn't have any limitation but you have to be aware by Microsoft limitation regarding the memory supported by each version.
For Example Windows 2003 32 bits SE support maximum 4GB of RAM.
So if you would like a single server installation is working but probably you will no t be able to have more than 4 users into system.
So the constraints are not coming from SAP BPC/ They are coming from Microsoft regarding maximyum amount of memory supported or maximum of processors supported.
Regards
Sorin Radulescu

HP Enterprise Integration Module for SAP - Windows Server 2008

Is there a download for the HP Enterprise Integration Module which will run on Windows Server 2008 for QC Version 10? HP Support has directed me to SAP Support for the Integration Versino 2.5 and above.

Hello John,
now I have a resolution.
I have deinstalled the MS SQL 2008 and install MS SQL 2005 plus SP2 at windows 2008 64bit VMware.
After reinstall HP Quality Center everything works fine.
( SQL 2008 is not official supported )
But there is another problem with the HP Enterprise Integration module 2.50 for SAP Solution Manager 7.0 EhP1,
the installer has a problem and does not work at windows 2008.
- this is a known HP problem and they should be published a newer version without the installer problem.
Today (april 6) I can't find an update, takes a while ... the "bad" version "setup_win.exe" has 132.327 kb.
you can only download the package from:
http://update.external.hp.com/qualitycenter/qc100/ent/enterprise_integration/index.html
you can find all add-ins at:
http://update.external.hp.com/qualitycenter/qc100/index.html
You should patch HP QC 10.00 with patch 10, see note 1329891 for details, takes 10 minutes or so.
With reards,
Michael

Windows Server 2008 R2 - You might not have permission to use this network resource. The request is not supported.

Hello !
I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
Well, is very crazy.
I view network shares by network computers and devices,
but not \\domain_controller or \\IP_domain_controller.
I execute ping for succeed for all servers.
Follow error bellow:

irectory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine SRVMTZDC01, is a Directory Server.
Home Server = SRVMTZDC01
* Connecting to directory service on server SRVMTZDC01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 12 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SRVMTZDC01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Advertising
The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
The DC SRVMTZDC01 is advertising as an LDAP server
The DC SRVMTZDC01 is advertising as having a writeable directory
The DC SRVMTZDC01 is advertising as a Key Distribution Center
Warning: SRVMTZDC01 is not advertising as a time server.
The DS SRVMTZDC01 is advertising as a GC.
......................... SRVMTZDC01 failed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... SRVMTZDC01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... SRVMTZDC01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... SRVMTZDC01 passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... SRVMTZDC01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
......................... SRVMTZDC01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
* SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :LDAP/SRVMTZDC01.shcorp.local
* SPN found :LDAP/SRVMTZDC01
* SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local
* SPN found :HOST/SRVMTZDC01
* SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
......................... SRVMTZDC01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC SRVMTZDC01.
* Security Permissions Check for
DC=ForestDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=shcorp,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=shcorp,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=shcorp,DC=local
(Domain,Version 3)
......................... SRVMTZDC01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\SRVMTZDC01\netlogon
Verified share \\SRVMTZDC01\sysvol
......................... SRVMTZDC01 passed test NetLogons
Starting test: ObjectsReplicated
SRVMTZDC01 is in domain DC=shcorp,DC=local
Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
......................... SRVMTZDC01 passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... SRVMTZDC01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14100 to 1073741823
* SRVDC01.shcorp.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 11600 to 12099
* rIDPreviousAllocationPool is 11600 to 12099
* rIDNextRID: 11737
......................... SRVMTZDC01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... SRVMTZDC01 passed test Services
Starting test: SystemLog
* The System Event log test
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 12:55:01
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 13:11:54
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A warning event occurred. EventID: 0x80001083
Time Generated: 05/02/2014 13:18:00
Event String:
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
from a given local endpoint to a given remote endpoint.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:20:41
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:21:03
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
......................... SRVMTZDC01 failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (serverReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on
CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
are correct.
......................... SRVMTZDC01 passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : shcorp
Starting test: CheckSDRefDom
......................... shcorp passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... shcorp passed test CrossRefValidation
Running enterprise tests on : shcorp.local
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
PDC Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
KDC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
......................... shcorp.local passed test LocatorCheck
Starting test: Intersite
Skipping site SAO, this site is outside the scope provided by the
command line arguments provided.
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
Skipping site CWB, this site is outside the scope provided by the
command line arguments provided.
Skipping site POA, this site is outside the scope provided by the
command line arguments provided.
Skipping site RIO, this site is outside the scope provided by the
command line arguments provided.
Skipping site VIX, this site is outside the scope provided by the
command line arguments provided.
Skipping site SSA, this site is outside the scope provided by the
command line arguments provided.
Skipping site FOR, this site is outside the scope provided by the
command line arguments provided.
Skipping site BHZ, this site is outside the scope provided by the
command line arguments provided.
Skipping site BSB, this site is outside the scope provided by the
command line arguments provided.
Skipping site RCF, this site is outside the scope provided by the
command line arguments provided.
Skipping site BEL, this site is outside the scope provided by the
command line arguments provided.
......................... shcorp.local passed test Intersite

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

PT 8.53 Windows Server 2008 R2 Error on booting domain.

Hi all,
We are setting up a test environment for PT 8.53 on Windows Server 2008 R2. Everything in the installation went correctly then we try to boot the domain in PSADMIN for the first time we are getting an error when trying to:
exec BBL -A:
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: WARN: No BBL available on site <server name>.
Will not attempt to boot server processes on that site.
Tuxedo info: Oracle Tuxedo, Version 11.1.1.2.0 with VS2010, 64-bit, Patch Level 056
Just seeing if anyone else has come accross this or has any ideas we could try.
Thanks.
Edited by: 991229 on Mar 1, 2013 7:15 AM

Interesting, when you did the configure step in psadmin, did BBL start then or does it fail there as well? I've not installed 8.53 yet anywhere, but in my 8.52 env, doing a reconfig will start the BBL to ensure things are shut down. My guess is it fails, which I think would cause your configuration to not occur maybe?
Command to execute (1-10, q) : 4
This option will shutdown the domain.
Do you want to continue? (y/n) [n] :y
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 067Booting admin processes ...
exec BBL -A :
process id=12818 ... Started.
1 process started.
Attaching to active bulletin board.
What if you get all your env variables set, and try to run tmadmin by hand?
set TUXDIR, PATH, PS_MACH, PS_HOME, PS_CFG_HOME, PS_SERVDIR, PS_SERVER_CFG, TUXCONFIG, LD_LIBRARY_PATH, NTSYMBOL_PATH, APPDIR (I think that's all of them, I'd have to look again)
then from cmd prompt run tmadmin
at the tmadmin prompt run boot -y
that would extract psadmin from the process, if that fails to find BBL, then I think you might need to pull out Process Monitor from sysinternals, and trace the tuxedo start process, which will show you what path BBL is really being looked for in, and possible help you solve this. You can also use Process Explorer to review what environment variables are set for what processes (such as psadmin or tmadmin).
Let me know what you find, as I'm interested in knowing what is causing this.

Dual boot windows server 2008 R2 with windows 8.1 UEFI

Dear all,
i was trying to dual boot in UEFI windows 8.1 and windows server 2008 R2 but every time windows server 2008 R2 separately before installing windows 8.1 was working after this windows 2008 R2 gives me blue screen immediately even if i installed windows 8
first then windows server 2008 but for all case windows server 2008 R2 works with debug mode .
i could not understand the reason

Hi,
What is the STOP error while BSOD occurred? You could try to troubleshoot BSOD with the following method.
How To Fix a Blue Screen of Death
http://pcsupport.about.com/od/fixtheproblem/ht/stoperrors.htm
In addition, have you tried to use Native Boot to make a dual boot? For details, please refer to the following articles.
Understanding Virtual Hard Disks with Native Boot
http://technet.microsoft.com/en-us/library/dd799282(WS.10).aspx
Add a Native-Boot Virtual Hard Disk to the Boot Menu
http://technet.microsoft.com/en-us/library/dd799299(WS.10).aspx
Native Boot To VHD Part I of IV - Overview
http://blogs.technet.com/danstolts/archive/2010/03/29/native-boot-to-vhd-part-i-of-iv-overview.aspx
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Dual boot Windows Server 2008 R2 and RHEL 7 Server?

Do someone know how can I setup dual boot of Windows Server 2008 R2 and RHEL 7 Server?
I've tried to install Windows first, then shrink, then install RHEL there.
But GRUB2 loader doesn't offer to start Windows, only Linux in the menu. (probably Windows partition need to be added to grub2 somehow)

Hi Oleg Vazhnev,
Please refer to following article and check if can help you.
How
to add Vista/Windows 7 partition to Grub 2 (Ubuntu 9.10, Karmic Koala)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, please also refer to following video and check if can provide you more details of installation.
Install RHEL 7 in Legacy Mode (Dual Boot Windows Server
2008 R2)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?

Similar Messages

Maybe you are looking for