WDS "windows setup could not configure Windows on this computer's hardware"

I use WDS on a 2008 R2 server to deploy Windows 7 Enterprise with SP1 64-bit custom images to a variety of devices within our enterprise. This has worked flawlessly for two years. I have three desktop models and three laptop models (all HP) that share
a common .wim image. I PXE boot a desktop and choose the image file to deploy. It deploys like magic - until this past week. HP sent us a replacement drive for warranty repair on one computer and on that one PC I started seeing the "Windows setup
could not configure Windows on this computer's hardware" message after deploying Windows 7. The image deploys just fine, the computer reboots just fine, services are set up, all devices are detected. As soon as "Setup is installing devices" hits
100% and the "Setup is applying system settings" phase begins, that message appears. After researching the error and pulling the logs that Microsoft's KB 2466753 describes, it seemed that my problem was related to an "Advanced Format"
disk in that new computer. What I don't get is that they state that this problem was resolved in SP1 (which is what I'm deploying!). So, I started downloading storage drivers to my boot image thinking that maybe a newer driver would fix things. Eventually
(many drivers later), I got the new hard drive to successfully take my Windows 7 image. Here's where it all went to pieces. No sooner had I corrected the problem on that ONE machine, that none of my other machines would successfully re-image. After
2 years of flawless operation, now all my computer models exhibit this same error (except the one with the new replacement drive). After recreating my boot image in WDS (being sure to pull it from a Win 7 SP1 DVD) and adding every driver in WDS practically,
I've gotten all but one particular model to successfully image. No matter what drivers I add (keep in mind, that no drivers have been removed
from WDS during any of this process), the HP z210 desktops I use will not accept the image. Microsoft suggests flipping BIOS settings but why the heck would I want to do that on every machine when their BIOS settings have never been a problem
before this? They also say I should only need to download special Intel drivers if my disks are set up with RAID - which they are not. Anyway, as a test, I inserted a standard Windows 7 Enterprise with SP1 64-bit DVD (same one I used to extract my boot.wim)
and installed Windows on that model with no trouble at all. I only get this error when deploying through WDS. I'm at my wits end and would appreciate any and all help at this point. Thank you!

Hi,
Based on my understanding, the current situation is all other computers deployment is fine but z210 desktops.
If so, it seems like you have the incorrect driver in WDS for that particular computer z210 desktops you used.
I suggest install it from WDS without driver for test.
In addition, you can post this issue in
Setup Deployment to check the WDS setting issue.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Windows setup could not configure Windows to run on this computer's hardware.

Just over a month ago, I purchased 6 identical Lenovo B5400 laptop computers for a small charity. Each is preconfigured with Windows 7 Professional, with a Win 7 recovery partition, and is supplied with a set of Windows 8 Pro recovery media (the charity
requires Windows 7 installed). I unpacked three laptops, configuring the first one as required by the charity, and using the second and third to experiment with the sysprep / imagex process before applying it to the configured system for migration to the other
laptops. After securing the second and third laptops by taking image backups, I applied sufficient configuration to the second to test the process, then sysprep'd it, and imagex'd it to a network drive, and to a USB stick. So far so good. After using imagex
to apply the custom .wim file to the third laptop, I found it booted up through the "updating registry settings", "starting services", and "installing devices" phases, but when it got to "applying system settings", it
displayed a messagebox titled "Install Windows", with the message "Windows Setup could not configure Windows to run on this computer's hardware". In the last few days, I have explored all the other incidences of problems with similar
symptoms found by a google search, including those on this forum, and tried numerous experiments without getting any further (in most cases not even getting as far)". The sysprep'd image on the second laptop boots ok, going through the same phases up
to "applying system settings", then reboots normally, requests username and PC name, etc, the only defect being that it loses the Realtek display driver (which only takes 2 minutes to restore). I have tried imagex /apply to put the custom .wim file
back on the same laptop it was taken off (the second laptop), and it works exactly the same as it did for the same system immediately after sysprep'ing. The only difference between laptops 2 and 3 is a serial number (QB07523967, and QB07524012). Is there any
reason that this should not work? If it will not, I'm faced with about 100 hours to configure the 6 laptops individually to the charity's requirement.

Hi,
This issue can be caused by hard disk settings in bios or DVD drive or bad SATA cable. Please try those steps below:
Upgrade the BIOS to the latest version; go into the BIOS and activate "Load Fail-Safe Defaults".
If you connect the SATA drives, please set the SATA controller to compatible mode in BIOS.
For more information about this issue, please refer to the article:
http://support.microsoft.com/kb/2466753
Andy Altmann
TechNet Community Support

Installation problem because errer message of "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE"

Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.

Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu

"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT

Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
Tony

Tony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards

Windows setup could not configure windows to run on this computer hardware

As I was trying to reinstall win 7 on my HP Pavilion dv6-7028tx Enterta laptop, upon competition, I was given this message by win7 saying that " windows setup could not configure windows on this computer's hardwear".
I did some research on this issue, it appeared to be the lack of SATA drivers on my computer.　
Could you please advise me which intel SATA driver should I installed to fix the problem?
If this method doesn’t work, then can you please tell me how to change the BIOS hard disk drive setting to AHCI or IDE?
Many thanks
This question was solved.
View Solution.

Hi:
You can't change the drive controller setting in the BIOS on any HP consumer notebook made in the last 5 - 6 years or so.
See if this works...
Download the drivers from this link below (first file listed -- 64 bit).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
Extract (copy) the files onto a usb flash drive without any folders.
With the flash drive and W7 installation media in the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.

Windows setup could not process the Catalog setting

Hi, I'm trying to deploy an image of Windows 8 Embedded using WDS (Windows Server 2012) and I find this message in client machine. It appears while boot image is loading...
I'm using an *.xml file to make an unattended installation, that I select from Client tab on my WDS server.
If I don't use any file installation is performed correctly.
Full message is "Windows setup could not process the <Catalog> setting in the unattend answer file.
See setup log files under [X:\Windows\panther] for details."
However, when I check this folder in Windows Server there isn't any updated log file...
My unattend.xml file contains:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UILanguageFallback>en-US</UILanguageFallback>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>
<Disk wcm:action="add">
<CreatePartitions>
<CreatePartition wcm:action="add">
<Order>1</Order>
<Type>Primary</Type>
<Size>25000</Size>
</CreatePartition>
<CreatePartition wcm:action="add">
<Order>2</Order>
<Extend>true</Extend>
<Type>Primary</Type>
</CreatePartition>
</CreatePartitions>
<ModifyPartitions>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Format>NTFS</Format>
<Label>System</Label>
<Letter>C</Letter>
<Order>1</Order>
<PartitionID>1</PartitionID>
<Extend>false</Extend>
</ModifyPartition>
<ModifyPartition wcm:action="add">
<Active>true</Active>
<Extend>true</Extend>
<Format>NTFS</Format>
<Label>Media</Label>
<Letter>D</Letter>
<Order>2</Order>
<PartitionID>2</PartitionID>
</ModifyPartition>
</ModifyPartitions>
<DiskID>0</DiskID>
<WillWipeDisk>true</WillWipeDisk>
</Disk>
</DiskConfiguration>
<WindowsDeploymentServices>
<Login>
<Credentials>
<Domain>*********</Domain>
<Username>Administrator</Username>
<Password>*********</Password>
</Credentials>
</Login>
<ImageSelection>
<InstallImage>
<ImageGroup>ImageGroup1</ImageGroup>
<ImageName>TCImage</ImageName>
<Filename>Install.wim</Filename>
</InstallImage>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
</ImageSelection>
</WindowsDeploymentServices>
</component>
</settings>
<cpi:offlineImage cpi:source="wim:c:/discwin8e/sources/install.wim#Windows Embedded 8 Standard" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Anyone know how to fix it?
Regards

Well, the setuperr.log contains (Check next image link, I can't add it using hyperlink or image):
http://oi61.tinypic.com/sxkjt5.jpg
I have tried to add a Catalog component, but I don't know that I should write in "sourceLocation".
Regards

"Windows could not start because of a computer disk hardware configuration problem. "

My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........

AmitNandha wrote:
My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........
Here's the problem XP will not install and work correctly that is why your getting that message.....Stay with the O/S that came with the laptop if you want to have stability in software and hardware operations.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.

Full message that pops up
"The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.
To authorize this computer for items purchased from iTunes Store, choose Store > Authorize This Computer."
I am unable to sync my music, applications, movies, etc. to my iPod touch. The only way I am able to bypass the message that pops out when I try to sync (the one in the title) is by clicking "Apply" instead of "Sync". To do this, I make changes to Apps, Music, or Movies (...) and the buttons "Revert" and "Apply" will replace the button "Sync".
My problem is most likely not due to using many accounts because I only have one and it is the only one that I use. I do not share accounts with my family members. Still, I have tried everything here, nothing has worked for me. Since I don't often listen to Podcasts, I have deleted them from my iPod. I have no idea why I am unable to sync and no one seems to have the same problem as me.
Thank you for your help in advance.
Details
iPod touch, 5th generation
iOS 8.1.2
iTunes 12.0.1.26
Windows 8
Purchases
Pre-ordered album "Froot" purchased from the account that is authorized to my computer
Podcast "Not Too Deep with Grace Helbig" also purchased from the account that is authorized to my computer

Try backing up to iTunes and restoring from that backup

This iphone could not be synced because this computer is no longer authorised but i try again and it says already authorised

I am trying to sync my iphone 4 to my computer ( Windows 7 64 bit ) so I can update my apps. when I connect my phone to the computer, a window pos up with the following . . . . . . . . .
this iphone 'colin's iphone' could not be synced because this computer is no longer authorised for purchased items that are on this phone
to authorise this computer for items purchased from the itunes store, choose store > authorise this computer OK.
I click on Store, authorise... type in apple id... type in password... click on authorise
It then says.... this computer is already authorised.... including this one, you have authorised one computer out of your available 5.
I unplug my phone and plug it in again and it does exactly the same again???
I'm just going around in circles???

I found the solution to this problem
the apple service helped me actually
the best and the esiest way is to solve this problem :
create a new account (as an administator recomended)
Bonjour servises must be enabled ( go to control panel > administartive tools> sevices> Bounjour services (change the category to large icons if you dont see administartive tools )
install itunes
sign in
authorize
SYNC
it must sync normally
but if the meesage pops up that points on a particular items that could not be synced ( to ur itunes because you are not authorized for this items ) REMOVE THEM
creating a new user account shows the items wich dont let you sync your iPhone
after you REMOVE those **** items that were not authorised , you can go to your old user account and SYNC it as old kind time
was having this problem 2 weeks , and nothing helped except this was. not deleting the SC Info folder, now copying apple folder to some other mobile divce folder
REMEMBER the problem is in your iPhone , it is about the items that are in your iPhone
Thanks to Apple service
for anyone who needs othe heple you r welcome to ask
will hepl you with a pleassure cause i know how I felt this days:)

The iphone could not be synced because this computer is no longer authorized for purchased items 2014

the iphone could not be synced because this computer is no longer authorized for purchased items

Hello 7283,
Thank you for providing the details of the issue you are experiencing with syncing your iPhone. It sounds like you computer is not authorized for some of the purchases on your iPhone.
I am not sure if you have authorized your computer, but I recommend trying that first. If you have purchases from multiple Apple IDs on your iPhone, you will need to authorize all the Apple IDs used to make purchases. Use these steps:
Open iTunes on the computer you want to authorize.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
If you have already authorized your computer, I recommend reviewing the following article for additional assistance:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Installed Xl Pro but get message Serial Number you provided is valid, but a qualifying product could not be found on this computer

I just bought and installed Adobe Acrobat XI Pro, but when I open it, or access a PDF file, I get the error message "Serial Number you provided is valid, but a qualifying product could not be found on this computer."
The list of products on the drop down list that comes with this message includes Adobe Acrobat XI Standard and Adobe Acrobat X Pro Macintosh, but doesn't include Adobe Pro XI for Windows. Selecting either of those, and using my serial number, fails, of course. As a result, I can't run my newly purchased program, or access any PDFs.
Please tell me what to do.
Chuck Poland
[email protected]

Chuck you have placed Order for Acrobat Upgrade if you don't have any previous version of Acrobat than you need to cancel this order and need to buy a full version.

I receive message "Serial number you provided is valid, but a qualifying product could not be found on this computer" when I try and install Acrobat XI Standard

I have a PC with windows 7 installed. Acrobat X reader and Acrobat XI Pro trial version run fine. I have purchased Acrobat XI Standard and there is a serial number in my account. Acrobat XI Standard installs fine but I receive the error message after putting my serial number in, "Serial number you provided is valid, but a qualifying product could not be found on this computer."

The message identifies that you have purchased an upgrade version of the applications and it is asking you to identify the previous version of that application that you are upgrading from and then to provide its serial number.
If you did not intend to purchase an upgrade version then you probably need to cancel that and purchase it at full price.

The HP software required for Scan to Computer could not be located on this computer.

No scanning from the HP front panel. Get this from the HP utilities "The HP software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again." I've downloaded, deleted and downloaded the drivers and i tried to let my mac get drivers from the printer. I have to go to the web do scan my flat bed.

Hello @wfreker,
Welcome back to the HP Support Forums! I understand you are not able to use the Scan to Computer feature with your HP Officejet 8625. Please follow the steps listed below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline

When I select “Update existing software in QuickTime Pro I get an error message saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
This has persisted for several weeks. Any help will be welcomed as I do not know how to contact QuickTime support via Apple.
I am using Windows 7 64 bit.
Many thanks

I was able to download and install the latest version of iTunes (10.6.3.25) without a hitch. After the reboot I tried again to update my exisitng Quicktime Pro software as described in my original posting and got exactly the same error message.
If it happens that there is no software to download because I am already running the latest version, surely a message to that effect would appear and not the one saying “A connection to the QuickTime server could not be established. This computer may be having trouble accessing the Internet or the server may be offline”
Still seeking advice if possible
Cheers

The iPhone could not be synced because this computer is no longer...

This is not about wanting to manage music, etc. It's about my work. I have an app in development and need to load the latest IPA for testing, a process performed through iTunes, like syncing anything else. When I try and sync I get the message, "The iPhone could not be synced because this computer is no longer authorized for purchased items that are on this iPhone.
I did the research on the internet and haven't found an adequate answer. I've tried:
— Being sure I'm logged into the same iTunes account as the iPhone.
— Deauthorizing then Authorizing the computer, after which I get an alert saying the computer has been successfully authorized, resulting in the same error message again when I again try and sync.
— Removing the SC Info folder, as found in this article: http://support.apple.com/kb/TS1389 . I guess I have the only Mac that has no trace af any such "SC Info" folder anywhere in the system (OS 10.6.8).
— Logged in under every conceivable account configuration (computer admin, device account, etc...) to no avail.
I have to get this IPA imported into the iPhone. It's the same process as syncing anything else. If anyone has a solution, please send it along. Clock is loudly ticking.
Many thanks.
Cayce

Same problem. Did you guys find the solution?

WDS "windows setup could not configure Windows on this computer's hardware"

Similar Messages

Maybe you are looking for