WDS with wired network

[IMG]http://i107.photobucket.com/albums/m291/justinjja/Setup-1.jpg[/IMG]
That is the setup. Right now the Extreme N is extending the time capsule. they all have the same ssid and key. If i enable the WDS with a wire connecting the BG Extreme what would be the result.
If I should not enable WDS what channels should i be using for every thing.

justin, Welcome to the discussion area!
If i enable the WDS with a wire connecting the BG Extreme what would be the result.
WDS does not apply to a wired connection.
If I should not enable WDS what channels should i be using for every thing.
Use the channel with the least amount of interference.

Similar Messages

Cannot log into T61 from remote computer with wired network and Windows Explorer.

Hi,
I am using a T61 7662-cto with Windows 7 Professional
When the T61 is connected on the home network with the wired network, I am not able to log into it remotely from another computer. On my second computer, I see the T61 with Windows Explorer but instead of getting the login window, it appears a Network Error with the message:
“Check the spelling of the name. Otherwise, there might be a problem with your network.” With a error code 0x80070035, “The network path was not found.” I tried the “Diagnose” button but it doesn’t give solution.
When the T61 is wireless connected, there is no problem. I can access it from my second computer.
I never have problem to connect to the second computer from the T61 with any connection type . I just updated the Intel Wireless LAN (bg, abg, abgn) for Windows 7 – ThinkPad, with the drivers required but it changes nothing.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73611
Do you have a hint for this issue why the wired network gives problem?
Thanks

Open this post, go to the flagged message. On its right is a button
to turn off the flag.
I went to the site. The only problem I had was one has to sign in
to see anything. Even the main page had a very large ''Please
Sign In'' covering the window.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

NAC GUEST WITH Wired Network

I wonder if you can set up without the use of the ACS, the visitor wired network?

ok, so I bought the AX because it seems that I should be able to do what I want. I plugged it into my network, but when Airport Admin Utility tries to scan for AX, nothing shows up. Any clues?
Thanks,
Mario

AirTunes cut-outs with wired network (solved)

To whom this may be helpful,
There are several discussions about Music cut-outs when using the AirTunes, but all of these discussions were focussing on a wire-less connection.
In my case, however, I have a wired Ethernet connection from my Mac to a 4-port-router, to which the AirPort Express is also connected. I got the first cut-outs about a year ago and it has been gradually getting worse, up to the point where it would cut out after every 5-10 seconds, pausing for 5 seconds. This is when I gave up using AirTunes.
Next, nothing much happened until I noticed a few weeks ago that my network had become notoriously slow. I first suspected a degrading ADSL connection, but I changed my mind when my router died. It turns out that my network performance was gradually degrading due to problems in my router (probably bad memory, forcing it to drop packages when the checksums were incorrect).
After having replaced the router, the network is up and running again as before and AirTunes runs smoothly again. With that in mind, you might like to test other units in your network!
Mac G4 Mac OS X (10.4.9)

I buyed 2 of the Airport Extreme, never got them working fine, till yesterday...
I have A Zyxel ADSL WLAN Router Switch. WPA-PSK as I wanted a secure Network. Both of the AX were connected with static IPs. WLAN was always working fine, but I had many cut outs with airtunes. I wanted a solution with lossles streaming audio with the possibility to connect my Receiver digitally. That's why I bought my first Apple hardware, as I was always told, Apple=Plug'n play. Very frustrating!
I tried other switches, Routers, WLAN adapters and cards, nothing worked. Airfoil does not support multiple speakers yet, so it's useless for me.
In the FAQ of the Airtunes, Apple mentioned to use lower security, as some Computers probably do not have enough power to stream music flawlessly. But my Computers really do have enough power! I think the AX does not have enough power to do that. So I created another wireless network with one of my AX. I set the security to WEP-40bit key and joined this new Network with my other AX. Not the best solution, as I'm now connected to the Internet or to the AX to use Airtunes. Cables could fix that problem, but then I could use a wired system instead...
I use Channel 11 for the AX WLAN (the only clean channel in my area), Multicast to 11, only G mode for Wireless and a 5 characters WEP-40 key and no WDS. Seems to work at the moment.
I hope this will help others with the cut or drop out problem

Airport express with wired network

Hello,
I am looking to play my itunes library through my receiver in my living room. There is an ethernet connection there. My mainMac is in another room, also connected to the network. Can I just connect the airport express with airtunes to an outlet in the living room with the ethernet wire into it? (and then the receiver connected to the audio out, of course) My mainMac does not have a wireless card.
I would appreciate some help. Thanks.

ok, so I bought the AX because it seems that I should be able to do what I want. I plugged it into my network, but when Airport Admin Utility tries to scan for AX, nothing shows up. Any clues?
Thanks,
Mario

How can i connected with wired network(Lan) ?

Dear Apple,
I have brought a Thunderbolt to Gigabit Ethernet from Apple Store in Hong Kong, New Town Plaza, DG. I have Bootcamp to window 7 before in my mac Book Pro, i plug the adapter in the window 7, but it seems like it is not working. However the wire is warm. I think it is the problem of Window 7 does not support the adapter. I really hope that you can help me solved the problem.

The TB-to-Ethernet adapter creates a PCI bridge, on my Windows 7 installation,
The Ethernet driver used to provide connectivity is...

Help with small wired network?

My office has 7 iMacs and 3 MacBooks using ethernet cables to connect via a hub. I'm trying to establish a wired network between these, so as to allow full browsing and read/write access among them while preventing access to any computer not physically connected.
I understand I can set the home folders to shared, but a few problems present:
1. This seems to establish wireless sharing, whereas we need a wired-only network.
2. I understand how to share between accounts on a single computer, say, accounts A and B on computer X. But how to add permissions for accounts on other computers (e.g. account Y on computer Z)?

Yep, I realize that, and it's where I'm stuck at. I'm only seeing two possibilities, neither of which is helpful...
A. allow permissions for "Users & Groups" on the same computer, which ignores the goal of networking users from other computers.
B. allow "Everyone" with a wireless connection, which ignores the goal of creating a network between only the office computers.
So the Receptionist computer wants to allow access to users from the Front Office computer, Technicians computer, and Back Office computer. Back office wants to allow users from the Technicians computer, Front Office computer, and so forth.
But for example, all I can figure out now is how to allow users on the Receptionist computer to allow other users on the Receptionist computer, or else to allow all users from any computer with a wireless connection...

Setting up wifi for ipad with an existing hard wired network

Greets all.
Got my aged mother in law an ipad so her bad eyes could read ebooks. Only way she can download new books is with a wifi connection. Trouble is, at her house My aged father in law had a hard wired dsl connection to the internet with Windows PCs. Can I install a wifi network in her house and still leave the existing hard wired network (all commputers connected via cat5) intact? I only need the wifi connection for the ipad. That said; what do I need to make this happen besides a wireless router. Ive heard the Airport Extreme gets good reviews. I only have pc experience and have a linksys router at my own house for my wifi network. So please...can the wifi ipad connection and hard wired dsl connection peacefully coexist and if so how do I go about setting it up? Thanks much!

Thank you! Thank you! Awesome! I've been trying to find an explanation for this is laymen's terms (I'm new to Mac and wi-fi networks) and this answered my question exactly. I have an iMac I want to keep its wired connection, and the iPad to run off wi-fi. Sounds like the Airport Extreme is the way to go, but I only say that because it's an Apple product.
What would be the advantage/disadvantage with going with something like DLink or Linksys? Or as long as I buy something with the 10/100 802.11b/g support, should I be okay.
Thanks again!

ACS 5.4 with DACL over wireless and wired network

Hi my name is Ivan, I have a question
I have a deployment in my network wired at this way:
Profile 1: corporate's users are working with 802.1X to authenticate computers and users with eap peap mschap v2 and Mac Filtering configuring in the Cisco WLC. My ACS 5.4 is integrate to the Active Directory.
Profile 2: Telephonies IP authenticate with MAB. All the Mac Address are registered in to the ACS locally.
Profile 3: user guest authenticate with portal web from Cisco Wireless Lan Controller over the wired network, and the account exist in to the WLC Lobby Ambassador
A my deployment in the wireless network is in this way:
Flex Connect with central authentication and local switching to connect 15 sites over the wan network.
SSID 1: users corporate working with 802.1X to authenticate users with peap mschap v2 and Mac Filtering configuring in the Cisco WLC. My ACS 5.4 is integrate to Active Directory.
SSID 2: users guest working with portal web from Cisco Wireless Lan Controller over the wireless network, and the account exist in to the WLC Lobby Ambassador.
I would like to configure in the Cisco ACS 5.4 Downloadable Access List (DACL) to use in my network wired and wireless.
How can I do it to my scenary?
Please could you help me?
Regards
Ivan.

Hello. To avoid confusion, let's divide the WLC based upon the operating system.
There are WLCs who run AirOS. That includes WLC 4400, but also includes WLC 5500.
There are WLCs who run IOS-XE. That includes the new Catalyst 3850-X and WLC 5700. (also I think can run AirOS too).
IOS-XE fully support DACL. On the other hand AirOS support DACL partially.
From ACS point of view, when you configure DACL for IOS you configure not only the name of the access-list, but also the access-list entries. That way the IOS devices don't need to have the ACLs pre-configured. This is great because you only need to create and update the access-list entries from only one place (which is ACS) and deploy easily to hundreds of switches.
On the other hand, when ACS configures DACL for AirOS it can only specify the name of the access-list. The AirOS device needs to configure the access-list with a name exactly as configured on the ACS. Sadly, each AirOS device also needs to configure all acess-list entries.
It seems you want to configure DACL along with other attributes. If you explain me a little more your requirement I can show you what to configure.
Best regards

I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

Disable all Firewalls & Anti-Virus software...try again.

Airport Express and wired network with static IPs

I have a wired network with static IPs. I have a block of free IPs I can use to connect to this network. Manually setting any of one IP from this block on my MacBook Pro via ethernet works great - full network connectivity including internet.
What I wish to do is add an Airport Express in between my MBP and the network, so that I may have greater freedom (wireless opposed to wired). Is the AX capable of this? If yes, what are the correct settings? Keep in mind there is no DHCP server on the network.
I have tried giving the AX an IP manually and then accessing it from the MBP having the AX share IP (effectively becoming it's own DHCP server?). This gives internet connectivity, but I can't see any of the servers on the network. I assume because I'm now on a new subnet.
So I then changed the AX settings to not distribute an IP and gave the MBP another IP from the block (different from the AX). This gives me the network, but no internet.
What am I doing wrong?

Okay, I made a mistake and forgot to set the DNS servers manually. It seems the second method works fine. I've set up WPA2 security as well - I'm assuming this is okay in this situation. What is the correct term for this setup? A wireless access point bridge? Is there anything more I should know about this setup? TIA

Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

I also thought that this was the case, but that is incorrect. Please see my previous post below:
I was having the same problem with an iPhone 4 and Windows XP. I finally fixed the issue! I read several posts over the past month telling me to make sure that both the PC and iPhone were on the same network. I thought that both were on the same network; however, I was using my "Guest network" to connect my iPhone to my Airport Base Station. In order for both devices to be on the same network, the first 3 numbers of both IP addresses must match. For example, if the PC's IP address is 199.167.1.X, the iPhone's IP address must be 199.167.1.Y. I signed onto my password-protected network from the phone just to see what IP address it would use. As soon as I logged on, my iPhone started to sync wirelessly. I don't know if this will work for anyone else, but I would suggest comparing the IP addresses of your PC and iPhone before doing anything else. For those posting that the PC and iPhone must be on the same Wireless network, my PC is hard-wired to the Airport Extreme and it still works!
My Setup:
iPhone 4 (running IOS 5.0.1)
Dell PC (running Windows XP SP3) (no wireless network card)
Airport Exteme Base Station (5th Generation & updated firmware)

Airport Express Problem with Wired/Wireless networks simultaneously

Hello,
I'm having trouble maintaining a connection with my AX (2012) in a work environment. Basically, I have a Win 7 laptop connected via ethernet to the internet/corporate net. I have configured the AX to create a separate wifi network that does not connect to the internet. In order to connect to the AX, I have to disable both the Ethernet adapter and the WLAN adapter, enable the WLAN adapter, connect it to the AX's network, and wait for it to show up in the utility. Only then can I re-enable the ethernet adapter for internet access. Then, inevitably, the connection dies within 15 minutes and I have to repeat the whole process.
Can anyone tell me what's going on here? Is the wired network interfering with the wireless network? Is something configured wrong? Below is the output from ipconfig/all, if that helps. The AX is configured with a 169.254 range. IP address and behaves the same way whether the IP address is auto or manual, and there is no difference if the signal roams channels or is fixed to a single channel (I've played with them all).
Thanks in advance for your help.
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : DW1501 Wireless-N WLAN Half-Mini Card
   Physical Address. . . . . . . . . : 68-A3-C4-0C-CE-5B
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.0.1.2(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 2:32:22 PM
   Lease Expires . . . . . . . . . . : Friday, December 07, 2012 2:41:43 PM
   Default Gateway . . . . . . . . . : 10.0.1.1
   DHCP Server . . . . . . . . . . . : 10.0.1.1
   DNS Servers . . . . . . . . . . . : 10.0.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : XXX.com
   Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connecti
on
   Physical Address. . . . . . . . . : 5C-26-0A-40-37-A9
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 3.197.129.227(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 2:42:43 PM
   Lease Expires . . . . . . . . . . : Thursday, December 13, 2012 2:42:42 PM
   Default Gateway . . . . . . . . . : 3.197.128.1
   DHCP Server . . . . . . . . . . . : 3.156.134.20
   DNS Servers . . . . . . . . . . . : 3.156.130.30
3.156.130.130
3.23.190.40
                                       3.23.192.43
   Primary WINS Server . . . . . . . : 3.156.130.30
   Secondary WINS Server . . . . . . : 3.156.130.130
   NetBIOS over Tcpip. . . . . . . . : Enabled

Here goes - read this through completely and see if it makes sense:
1. Reset the Express to factory settings by unplugging it and plugging it back in while holding in the reset button - release the button when the light starts blinking - then wait for the light to blink slowly indicating factory default.
2. Disable the wireless and enable the ethernet on the laptop and connect an ethernet cable to the WAN port (the circle of dots) of the Express and use the AU toset it up in bridge mode to create a wireless network with a name of your choice - you don't really need a password but you can assign one if you wish - if you do not use a password you will have to choose to ignore the error message for no security.
3. Accept all other defaults and ignore any messages about not having an internet or ethernet connection and update or finish the setup - if you get a blinking amber light, open the AU and correct any error messages.
4. You can now disconnect the ethernet cable and disable the ethernet on the laptop and enable the wireless so you can stream iTunes to the Express - the laptop must stay wireless to do this - you can not accesss both at the same time - you can also use an iPhone or iPad or iPod to use Airplay and then you can use the laptop via ethernet for the internet.
5. To access the Express from now on, you have to use the AU wirelessly from the laptop.
The above is assuming that you don't currently have wireless in your office - the other alternatives are:
1. To hardwire the Express and have it create a wireless network and access the internet - you could then use your laptop wirelessly or wired to connect to the Express and use Airplay and your pc at the same time.
2. If your office has wireless, you can set up the Express to "join" the existing network - you can then do the same as in number 1.
I hope this helps - everyone's situation is different - the above scenarios work for me - you might have to do some tweaks but the info is there - let me know if you have any questions.

MacBook Air with external monitor and wired network

Hello,
I'm investigating the possibility to buy a MacBook Air 13", but I have a big doubt: most of the time I work in office, with wired LAN and an external DVI monitor.
I've seen that I can buy an USB to LAN adapter and a DisplayPort to DVI to connect to the Thunderbolt port, but in this case I will have only one USB port free a no other Thunderbolt.
Is anybody advising a different set of periferals to deal with this environment?
I haven't found any Thunderbolt "HUB" around, does this exist, to multiply the Thunderbolt port?
Thank in advance for any advice
Massimiliano

Naturally yes .. The problem is not the USB itsself, but the fact that original adapters from Apple (LAN and DVI) are made from a Thunderbolt connector, and they do not replicate the port where they are connected to.
Others party LAN adapters that comes on USB port are only 10/100 Mbs, whilst the Apple's one is a Gigabit. This is why I asked for some sort of Thnderbolt hub, or any other experinced advice..
I know that the MacBookAir comes with a good 802.11n integrated wireless, but as you know (or can imagine), when you are in the office a Gigabit connection is another movie, especially if you are tranferring large amount of data or are connected to huge centralized databases.
I was preferring a MacBook Air to the pro for it's monitor: for me a 1440x900 is much more better than a 1280x800 when I'm out of office. On the other hand, the version with the retina display is at the moment too expensive for my budget.
The final solution could be a MacBook pro 15", but I was preferring the 13" when in mobility, for its form-factor.

Bridging Wired Network with AE?

Hi All,
I've got a wired network without DHCP service, so all IP addresses of the connected computers / printers are assigned manually. The range of available IP addresses runs from 192.168.30.1 to 192.168.30.139.
What I would like to do is add a wireless component to this LAN by means of an Airport Express basestation. I've connected the ethernet port of the AE to the existing wired network, and used the Airport Admin Utility to configure the unit:
Internet tab
Connect Using: Ethernet
Configure: Manually
IP address: 192.168.30.10
Subnet mask: 255.255.255.0
Router address: 192.168.30.1
DNS servers of ISP
[No Domain name]
WAN Ethernet Port: Automatic (Default).
Network tab
Distribute IP addresses: DISABLED
Network configuration on the laptop (12' Powerbook G4, MacOS X v. 10.4.8):
TCP/IP settings:
Configure: Manually
IP address: 192.168.30.120
Subnet mask: 255.255.255.0
Router address: 192.168.30.1
DNS servers of ISP
[No Domain name]
From the laptop I can log onto the wireless network, but there is no way to get a connection to the internet (through the specified router). What am I doing wrong? (Is this possible at all?)
Please help!
Alexander - Amsterdam- The Netherlands.
Pb g4 12' Mac OS X (10.4.8)

System Preferences/Sharing/Personal File Sharing will give access to the Public folders on the Macs for those users who don't have an account on those Macs. It will give complete access to the entire internal hard drive (except for other users' home directories) to those who have an account on those Macs.

WDS with wired network

Similar Messages

Maybe you are looking for