WDS won't start after ConfigMgr R2 upgrade

Hi guys,
After upgrading to R2 recently our Primary Site Server which hosts a DP will no longer PXE. I believe this due to the WDS service not starting. Other DP's are still functioning correctly.
I have done the following to try and resolve:
Applied http://support.microsoft.com/kb/2905002/en-us
Reinstalled wimgapi.msi
Removed and re-added the DP according to this:
http://social.technet.microsoft.com/Forums/en-US/775f96eb-011e-4b91-b9a1-264877a684da/after-upgrade-from-sccm-2012-sp1-cu3-to-sccm-2012-r2-pxe-service-role-crashes-wds-service?forum=configmanagerosd
Ensure that  Microsoft Visual C++ 2008 Redistributable is installed
The server is a Windows 2012 VM.
Any suggestions for resolving this would be appreciated.
Regards,
Locust12

When you uninstalled WDS, did you remove RemoteInstall-folder? Also I think it is the best way let confmgr to install WDS. I´ve been fighting with many WDS/PXE problems, and what I´ve learned, that the action order is very important.
If you think you´ve done it ALL twice and you are at endless loop problem solving, you might try to clean your server OS with dism /online clean-image commands, but I really don´t know, is there any other risks what might stop working after that.

Similar Messages

  • Mac air won't start after attempt to upgrade OS to Maverick

    I was prompted by APP store that a new OS Merverick was available so I decided to install.
    I downloaded the OS via APP shop (therefore no disc) and check for the updates for other software before restarted the Mac.
    Since then, it won't start up the system and keep stack on the grey screen with a apple mark.
    Having checked some forum in the Apple Support Communities, I managed to open a disc utilities and tried to repair.
    At the first instance, there were some error occurred, but after few attempt with the disc utilities it now says that HD is fine.
    However, main HD which is displayed on the left side of disc utilities is gray and I can repair permission.
    It also says that HD (journalled) which terminology that I have no idea what this means.
    Several attempt with the disc utilities, when I tried to restart "Apple symbol" appeares and several second later the "NO ENTRY" symbol appears and get stuck.
    At this point, I decided to re-install OS X Lion from the CD, but when I try to select the HD is says that HD is locked.
    I am completely lost to what to do next.
    I have several files on this MAC which I would like to rescue if possible.
    I have never had any issue with HD and I can only deduce that this was caused by the new OS installation.
    Could someone help please?
    Thanks.

    How to create an OS X Lion installation disc
    How to prepare your Mac for OS X 10.7 Lion
    OS X Lion Unable to download OS X Lion wireless
    Lion Installer reports This disk cannot be used to start up your computer
    Lion Recovery Disk Assistant
    Mac OS X v10.6, OS X Lion Cannot install Mac OS X
    OS X Lion About Lion Recovery
    Try Lion Community, and MacBook Pro
    Lion Mac OS X Communities
    MacBook Pro

  • Mac won't start after failed OS upgrade

    I attempted to upgrade from Leopard to Snow Leopard using an installation disc. The installion failed and now my mac won't start. It hangs on the apple logo screen for about 2 minutes then dies. I've tried booting from the disc and using the repair disk utility but I get an error saying the disk can't be repaired and instructing me to back up my files and erase the disk. Problem is, I can't get to my files because all I can do is boot from the disc drive. Can anyone suggest a way get the installion to work, or a way to back up my files?
    iMac is 3 years old, 4 Gb ram and 2.66 Gh processor
    Any help would be much appreciated.

    Possibly we can save some of the files.
    When booted from the Install Disc...
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    Hopefully you have another external drive and can Image the whole internal drive to an external.

  • Boot Camp won't start after OSX Yosemite upgrade

    Like so many others, I installed OSX Yosemite this morning and now Boot Camp no longer works.
    After I updated to Yosemite I restarted my computer, held down  alt, and was presented nothing but a Macintosh HD. I followed “Loner T’s” instructions…
    ndiskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo fdisk /dev/disk0
    Enter you password when prompted.
    …and now a windows option is available during startup. However, when selected, all I get is a black screen with "A disk read error occurred" notice.
    I’m in serious trouble if I cannot repair this issue. PLEASE HELP.

    Yes, here they are...
    James-iMac:~ SIGMA$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            572.0 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data                         102.9 GB   disk0s4
    James-iMac:~ SIGMA$ diskutil cs list
    No CoreStorage logical volume groups found
    James-iMac:~ SIGMA$ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1117208056      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      1117617696     1269544      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1118887240   633737912        
      1752625152   200898560      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1953523712        1423        
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header
    James-iMac:~ SIGMA$ sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 - 1117208056] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [1117617696 -    1269544] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [1752625152 -  200898560] HPFS/QNX/AUX
    James-iMac:~ SIGMA$

  • Software licensing service won't start after sql server upgrade

    having issues with windows server 2008 sp2 64 bit OS where the software license service do not start. and see the server as not genuine.  when i run net start slsvc, I got a system error has occurred. system error 34 has occurred. the wrong diskette
    is in the drive. insert *** (volume Serial Number: ***) into drive ***.
    I try chkdsk and sfc/scannow. nothing seems to work.
    thank you for your help
     

    Hi,
    Please try the steps below to resolve the issue:
    1.net stop slsvc (select yes) in my case it was already stopped.
    2.in command prompt type: 
    3.cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
    4.rename the tokens.dat file: ren tokens.dat tokens.old
    5.still in the command prompt type  cd %windir%\system32
    6.type net start slsvc
    7.type cscript slmgr.vbs -rilc (this may take a long time)
    8.Then reboot the machine twice !!!
    9.slmgr.vbs –ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (assuming you have a MAK key, not a KMS key)
    10.To activate your OS, just type: slmgr.vbs –ato
    If there any other error message?  You could refer to the article below to troubleshoot the issue:
    How to troubleshoot Volume Activation error codes in Windows 7, in Windows Server 2008, and in Windows Vista
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;938450
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

    Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

    This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
    http://support.mozilla.com/en-US/questions/880170

  • C3-01 won't start after charging

    I'm so angry right now but I will try and be cool about this!
    I bought C3-01 mobile phone about four months ago and it is already causing me problems.
    The mobile phone simply won’t start after charging. Last time i charged it, it miraculously came to life only, and only after annoying me for about hour and a half. Now I fear it is completely dead!
    Battery was not completely empty so the phone should still start even if the wall socket is broken. Which is not, wall socket works perfectly.
    Nothing helps! I tried removing the battery and then restart. Removing the battery then removing the sim card, memory card and that piece of “advanced technology” simply won’t start!
    I didn’t buy my new phone so that I can use my old Motorola mobile, which btw., still works after 4 years of intense usage.
    I will never buy Nokia again!

    Hi,
    Sorry to hear that your phone is not starting after charging.
    I would suggest one more thing, which maybe helps. If you have another battery, please try.
    If not,  i would recommend to visit Nokia Care Point in your area.
    To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
    Br
    Mahayv

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon

    HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon, when I see the process in task manager Firefox is there but after a second it will end processing automatically, I have tried ff7 and ff6 and have the same problem, even re installing the Firefox doesn't fix the problem, any one know the reason? I'm using a win7 64bit, and bitdefender internet security

    Hi All,
    This is not a virus . I used this website & I found it very useful & you can remove it through the following steps.ar.hao123.com 1- Then right-clicking on the icon Mozilla Firefox on the desktop, then choose "Properties", as shown in the picture: 2- Select Tab "shortcut", and then delete the text after. Exe in "target" as shown in the following picture, then press "Ok" 3- Open Firefox, and then choose "options" from the list of "tools" 4- Select the tab "general", and in the list "when Firefox starts" then select "show my homepage" and in the box "homepage" then enter any other link and then press "OK"
    you can visit [http://ar.hao123.com/report/ar-feedback.html Hao123] hao123
    ar.hao123.com

  • Firefox won't start after update - nothing in support pages helps

    windows 7 - firefox won't start after update - no support pages are relevant

    -> [[Firefox will not start]]
    Check and tell if its working.

  • Firefox won't start after google chrome imported all data(bookmarks,passwords,history,etc) from firefox

    firefox won't start after i import the data to google chrome.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

    My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

    Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

  • Assistant NET8 and DBCA won't start after installation HELP

    HEllo,
    I've installed oracle 9.01 and later on 8.1.7 i cannot use the assistants net 8 and dbca after installation. Does anybody have the same problem. I think is has something to do with jre versions.
    I alse got the same problem when i installed db9.0 and oracle appserver 1.2.2.2 on the same machine. SOme config assistant won't start after install.
    ALready tnx.
    Francus

    Hello, yogendra k saini
    I'd installed oracle90 and 1.2.2 in different oracle homes. There was no error message. When i pressed the icon. Nothing happens.
    Yesterday i installed also a 8.1.7 database on the same machine as the 9.0.1.4 database. After a reinstallation of appserv 1.2.2a everything seems to work fine.
    but it is still a mystery for me why, because when i only install a 9.0.1.4 database and appserv 1.2.2.2 something goes wrong. Maybe APpserv 1.2.2. doesn't work fine with 9.0 database. That's not exactly true because i used appserv 1.2.2 for forms en reports...
    gr.
    Francus

  • Safari won't start, after installing X Lion

    Safari won't start, after installing X Lion

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Maybe you are looking for