WDTV Live Medi Player - remote will not work unless I unplug and replug media player

Hi I know somebody may have answered this on another thread but I could not find it. I was wondering: Has anybody found the solution to the remote not working until I unplugged and replug the power adapter of the media player? It seems to me that something either gets reset in the unit to cause this and we just have to reset it by stopping the power from going to the unt and it somehow resets it back. I have the latest firmware on it, 2.0.32 I think. ansj64

Ansj64 wrote:I have the latest firmware on it, 2.0.32 I think.dont think, check Setup > About

Similar Messages

I am using a USB keyboard and everytime I wake the iMac from sleep the keyboard will not respond unless I unplug and replug the keyboard. I am using a mid-2010 iMac with OSX 10.6. Any help would be appreciated.

I am currently using a USB keyboard (PC Model) and everytime I wake the computer from sleep the keyboard no longer responds unless I unplug and replug it. The USB mouse I am using works fine with no issues and I have already gone through the prompt to identify the keyboard in the settings. If anyone know of a setting I can use to permenantly enable the keyboard so I no longer have to unplug and replug it that would be appreciated.
Thank you.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

Cconnect it to your computer with the latest version of iTunes installed.

My iphone will not work unless i plug it into my wall charger. but it is fully charged! When I turn it on (only turns on while plugged into wall) it says it needs to be My iphone will not work unless i plug it into my wall charger. but it is fully charged

My iPhone will not work unless I plug it into my wall charger, It is fully charged but only works when it is plugged in to wall charger. When it is turned on it say "Restore needed iphone can not make or receive calls' i tried plugging it up to Itunes but it will not turn on to sync.

First try a hard reset, press and hold the power button and home buttons until the phone restarts and displays the Apple Logo, then let go.
If that doesn't work...
Try forcing recovery mode and then restore with iTunes.
HT1808 iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

HT201263 I just bought this iphone not even a month ago. It will not work unless it is plugged into the wall. It will not turn on plugged into a computer. Am I SOL? I do not have insurance.

I just bought this iphone not even a month ago. It will not work unless it is plugged into the wall. It will not turn on plugged into a computer. Am I SOL? I do not have insurance.

You do not have insurance.
You do have a one year warranty on workmanship and materials.
Call Apple and set up an appointment to have them look at it.
They should fix it ot replace it for you.
Allan

I started working for ChaCha, and now firefox will not work unless I manually close it in the process tree every time I want to use it. I also cannot open more than 1 page at a time.

I started working for ChaCha 11/26/2010, I had to download a program to take incoming questions.
Ever since then, Firefox will not work correctly, even if I am totally logged out of ChaCha, and the page is closed, if I try to open my browser using Firefox, it will not open, I have to go into the processor tree and manually end Firefox, then it will work, but it will only let me open 1 page at a time. For example I have Firefox open now, but if I go and click on the icon to open it in a new browser, it will not open, I either have to close this, or use IE-I HATE IE lol.
I cannot use the ChaCha add on you have because it is not for the new version of Firefox, please help, I love Firefox, but not being able to open more than one window/page at a time does not cut it, nor does having to manually stop it from processing. I have tried re-installing it too.
Thank you, Melinda

I should add that I face the same problem with Safari and Google Chrome.

CC will not work-uninstsll run cleaner and will not install

W7 CC will not work or update. Uninstall from control panel. Run CC cleaner app. turn off antivirus. try installing- still will not install.

Please follow the steps in :
Error code 50
https://forums.adobe.com/message/6801531
This error code is common, please let us know if it worked
Regards
Rajshree

Internet will not work unless connected to wifi

The other day i noticed my internet would not work unless i was connected to wifi. I have tried EVERYTHING
- i changed my mobile data network settings
- i reset network settings
- i rang up vodafone (useless)
- i updated my phone
- i reset my phone to factory settings
- i took my battery out and put it back in again
i am literally ripping my hair out here, i want to cry, my phone is my life..literally :| i use it for everything!
someon please help me :'(!!!

"- i took my battery out and put it back in again"
How did you do that? Are you sure you have an iPhone?

My apple tv worked fine till i got new Panasonic 55 plasma. now the tv doesnt recognized the hdmi unless i unplug and replug the apple tv.

my gen 2 apple tv worked fine on my 5 yo Panasonic Viera with HDMI cable.
i bought new 55 inch Panasonic and new hdmi cables.
the apple tv works fine but...if i turn off the tv and leave it off for a while, then try to watch apple tv, the apple tv is off and no signal seen at the tv
if i unplug and replug the apple tv it reboots and works fine on the tv
i tried with three diff hdmi cables and three diff ports on the tv.. all same problem
help

After successfully logging onto your network, your tv screen should display a 5 digit passcode for you to enter into your mac. Does it do this.
The tv should now have appeared in your device list in itunes and by clicking on the device you should be able to enter the passcode to register with itunes. Can you do this.
I suspect you can do neither from what you have said but whilst I wouldn't be surprised if the later didn't happen, I'd be surprised that the former didn't.

My remote will not work with my TV @nywhere card, Please help.

I have just installed my TV @nywhere card and it works great. I have all the cables plugged in right but I can't get the remote control to work. I even tried a new battery. I'm running windows XP pro. Any Suggestions?

What's wrong with it is it's broken. The power button is broken. The dock port may be broken. The battery may have reached the end of its useful life.
Make an appointment at the genius bar of your local Apple Store and have it checked out. There are no words that will fix failed or broken hardware other than "here is my credit card"...
An out of warranty replacement for an iPhone 4 is only $149.

Adobe Flash Player Installer Will Not Work

As the title suggests, my adobe flash player will not install on my Mac Book Pro.
About 3 weeks ago my computer started saying I needed to upgrade my Flash Player for it to watch videos. So I tried.
I went to Adobe.com and tried installing the Flash player, the file its self downloads fine, but when I try to run the installer It gets stuck at 30% every. Single. Time.
I tried uninstalling Flash player, turning plug ins on and off, no luck.
I was running 10.8.5 OS the other day on my mac, and decided to upgrade to OS Yosemite today to see if that would solve the issue, no luck.
I'm all out of ideas, please help.

Try the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

Nano will not work unless plugged in

Hello.
I have searched through the help section and through the forums, but I can not seem to crack this problem.
My inlaws told me there iPod nano would not work anymore. They simply told me that they could not get it to come on. I thought I could fix it rather easy. Turns out that it isn't that easy.
The nano will only work when I have it plugged up. It says it is fully charged. When I unplug the nano, the screen dims out for a second and then goes to gray as if it were off. I can not get it to come back on however. When it is plugged in, I can navigate through the nano as if there are no problems. As soon as it is unplugged however it acts dead.
Any suggestions? I've tried resetting. Doesn't work unless plugged in...and didn't solve the problem. I've done the five r's. No problems with the hold button...
I am lost on this one guys.

I would say that it's a dud battery.
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.

Firefox will not work, it suddenly stopped, and I have tried uninstalling and reinstalling

Last week firfox suddenly stopped working. I have uninstalled and reinstalled but still will not repsond. But when I have tried to uninstall it says it can't because it is running, but in task manager there is no indication in the window firefox is running.

Perform the suggestions mentioned in the following article:-
-> Software Update not working properly
* http://kb.mozillazine.org/Software_Update#Software_Update_not_working_properly
Check and tell if its working.

Firefox will not open unless i reboot and the "send Link" option no longer works

after firefox is opened it works fine for awhile and then when i close the browser the desktop icon is unresponsive to o pen again unless i reboot. also, the "send Link" option, that always worked before, now does not.

I had tried this before, but went ahead and tried this again.
I clicked on "reset Firefox". Firefox closed, but did not come back up. When I tried to open it again, I did receive a message that said Firefox is running but is not responding, that I couldn't open another window without stopping the processes on the other page.
I never got a window that showed me the information that was imported, or a place to click finish.
Since I don't believe this completed, I don't believe my problem will be solved.
Debra

Macbook 2009, will not work properly, is slow and music is jumpy any help or advice is appreciated

i bought my macbook pro in the summer of 2009, it worked perfectly fine for pretty much a year and now its messed up
music on itunes will stop every 10 to 30 seconds for 2/3 a time
laptop will freeze (shows the loading disc) most of the time im on it
will not play any games eg sims medeval, same as itunes it pauses every 30 or so seconds
if anyone has any ideas on what i can do to sort it out would be much appreciated!
i have tried resetting it and loading everything back on, it didnt work
thanks leozmck

update, after another reformat and reinstall of the drive and OS, the macbook is running (not shutting down anymore) but only on A/C, and still does not recognize the battery. I installed Snow Leopard, checked to make sure I had latest firmware updates (did) then updated to the latest Snow Leopard version, about a 1.26 GB download, then used my USB install key for Lion and upgraded. No shutdowns during all of this, looks like a clean Lion install, but still does not see the Battery.
Any of you experts have any ideas?

WDTV Live Medi Player - remote will not work unless I unplug and replug media player

Similar Messages

Maybe you are looking for