WDY_CTLR_EXC getting the following warning message
Hi Guys,
I have transported my changes to UAT.In UAT iam getting the follwing warning message.
"no entries for WDY_CTLR_EXC will be imported in this step".
Kindly help if you people have came across these type of warning message.
Regards,
Vijay.
Hi Vijay,
I think the below links might be helpful for you.
How to check if repository objects or customizing was transported - Basis Corner - SCN Wiki
Use of SMODILOG table used to find the customer... | SCN
Problem while Importing Transport Request | SCN
Regards,
Rama
Similar Messages
-
I am getting the following error messages:
I am getting the following error messages:
May 29 15:31:42.404 utc: %SFF8472-5-THRESHOLD_VIOLATION: Gi1/1: Rx power high warning; Operating value: -2.0 dBm, Threshold value: -3.0 dBm.
May 29 15:41:42.974 utc: %SFF8472-5-THRESHOLD_VIOLATION: Gi1/1: Rx power high warning; Operating value: -2.0 dBm, Threshold value: -3.0 dBm.
What is the solution?Hi,
From the error decoder
Showing 1-3 of 3 results
Page: 1
1. %SFF8472-5-THRESHOLD_VIOLATION: [char]: [char]; Operating value: [char]There was a threshold violation as specified in the message.
Recommended Action: Contact your technical support representative.
Related documents- No specific documents apply to this error message.
2. %SFF8472-5-THRESHOLD_VIOLATION: [char]: [char]; Operating value: [char]There has been a threshold violation as specified in the message.
Recommended Action: Make sure that the port is active. If port does not need to be active, then transceiver ought to be removed. If port should be active, but is not, then make sure that the connection is appropriate. Sometimes, removing and reinserting transceiver might help. For all other issues, please contact technical support.
Related documents- No specific documents apply to this error message.
3. %SFF8472-5-THRESHOLD_VIOLATION: [char]: [char]; Operating value: [char], Threshold value: [char].The specified port is not connected, or it is connected to a damaged fiber optic cable.
Recommended Action: If the message relates to an enabled but unconnected DOM transceiver, shut the port to stop the alarm messages. If the alarm persists, or relates to an enabled and connected transceiver, contact your Cisco technical support representative.
Related documents- No specific documents apply to this error message.
Hope this helps
Regards
Alex -
When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.
Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I am having trouble downloading Itune, icloud etc onto my Windows 7 PC and keep getting the following error message "this installation pack could not be opened, verify that the package exists and that you can access it"
tried downloading the quicktime installer, I get the same message with it too
-
I have OSX 10.7 Lion. I set up a separate email account for my wife. All of a sudden when she tries to enter and website from email we get the following error message. JavaScript; The notnull validator has already been loaded. From there we can't seem to go any where. When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai. If you try and got directly to Safari you get the same error message and can't go any further. Please help.
What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??
The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?
I have advised McAfee's product team of the problem and this thread, and they're looking into it now.
-
Airport Express- No internet connection. I am getting the following error messages- No DNS Server and Double SAT. Can anyone walk me through a fix
Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.
Might also put them in the Airport Express, no idea what Double SAT is!? -
Hi , I am trying to update iPod that has iOS 2.2.1 to iOS 4.2 but I am getting the following error message, "the iPod could not be restored. An unknown error occured (-1)." I would appreciate if anyone could let me know what the problem is and if it is possible how to fix it? Thanks
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
I am getting the following error message "wireless network appears to have been compromised"
I am getting the following error message "wireless network appears to have been compromised"
Any information would be helpful.bclark173 wrote:
I am getting the following error message "wireless network appears to have been compromised"
Can you provide a screenshot of this message? Make a screenshot by following the directions here:
http://support.apple.com/kb/HT5775
Be sure no sensitive personal information is displayed. To add that image to a post here, click the camera icon in the post editor toolbar.
Maybe you are looking for
-
Memory Leaks Unresponsive Mouse
2009 8 core Mac Pro w/ 24 GB of RAM, ATI Radeon 4870, and a SeriTek PCIe eSATA card (card only has drives connected when running a manual drive clone). When running Toast 10 or Parallels 9, my RAM will fill up (I use a program called Menu Meters to
-
ITunes Doesn't Open with new CD
I have just tried to play a new CD on iTunes, when i load the disc it says i need to download new codecs, when i do this some different software plays the disc. Also, i don't get the option to burn it into my library! The CD properties show it as a C
-
Doubt in Firing Query with multiple opportunities UUID/IDs
HI Folks! I might have simple doubt but please help me on this! 1. I have a custom BO with association to opportunities. [DeploymentUnit(CustomerRelationshipManagement)] businessobject Sy_Trade { [AlternativeKey] [Label("Trade Id")] element tradeid :
-
Running copy functions in the background
Hello, Does anyone know how to run copy functions in the background? I am having an issue because you have to save after the CF are done.. How can you do this in the background? Thanks,
-
Status Profile: Multiple Active Statuses
I have created a status profile through BS02 and assigned to a couple of Sales Document Types. After implementing, I have found that there can be multiple active statuses. This is not a desired result. 1. Is there a way to control the profile, so t