We are 2 to use itunes at my house but i'm not able to sync my ipod on itunes because it's always the music and the info of my grand father ...

i try to syncronise my ipod but it's not wor; i just see the music of my grandfather and his account! i don't want to go on itunes store i want to see my music and my ipod's informations on itunes. help me please im discouraged

Refer here:
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495

Similar Messages

  • HT2305 My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    My iPod is not being read by iTunes. What do I do to be able to sync my iPod if iTunes is not starting the setup wizard for the iPod when it is connected to a Dell PC? I am new the iTunes and iPods.

    Hello, BAHannebaum.
    The article below should resolve any device not being recognized in iTunes issue that you are experiencing.  The most common issues are the Apple Mobile Device Support driver or iTunes is outdated.  Start with the first step and test the results after each step processed. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • I'm not able to sync my Ipod with Itunes.  It's there, but even manually there is an error saying syncing didn't work.

    A while back I had to restore my laptop to factory settings due to a virus.  Until that time, I was able to sync my newer Ipod Touch 4th Generation.  Now, even though when I connect my Ipod, it shows it there, I am unable to sync it with my Itunes on my laptop.  Therefore, I cannot get all my music onto the Ipod.  I tried to troubleshoot.  It said to go under my Ipod and manually sync, but when I clicked the "sync" but, after a few minutes an error came up saying "Could not sync.  Sync failed to start."  Anyone know what I can do?

    i have the same problem . help, anybody

  • HT2729 i am not able to sync my ipod to itunes

    whenever i connect my ipod to my pc..pc does not recognize it.ipod doesn't get charges as well.i  updated all itunes softwares buut no avail. please help me out asap.neither the ipod shows that it s connected t pc.operating system-windows xp.service pack 3
    <Edited By Host>

    Can you try another 30 pin USB dock connector cable if you have one lying around or know somebody you could borrow one from temporarily. 
    Another good test at this point would be to connect the iPod to another PC or Mac with that same cable to verify if it's a problem with the cable or your own Mac/PC.
    B-rock

  • I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    I've downloaded the newest version of softwear to my iTunes libary (iOS 10.5 i believe) iTunes store now dosn't function right and i'm not able to sync. my iPod 4G with my libary. i've tried to reinstall iTunes, but for no use. help please.

    well i have to be honest, but i don't know if it the vista you use has any significance for this. but you can try.
    okay follow:
    1: click "start" on the status line on the buttom of your screen.
    2: then click on "all Programs" and find "Accessories" and find the "command prompt"
    3: Right click with your mouse "command prompt" and click on "run as administrator"
    (as you has click'd on "run as administrator", "command prompt" should appear.)
    4: when it appears you need to type this "netsh windsock reset"
    5: wait for your computer to registrer the command you gave it, and restart your computer.
    then erverything should be pretty much as good or better then new.

  • I recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !!

    i recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !! i have tried everything i.e. reset iphone /hard reset/network setting reset /sms service no i have also changed but i am still not able to send sms.. please help me as i am really worried .. thank you !!

    I had the same problem.  Kept getting message of waiting for activation or check network connections.  I also tried every solution out there and nothing worked.  This did though:  I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work).  It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer.  I let itunes find it, did a complete backup in icloud, then did a restore.  Entire process took a couple of hours, but I now have imessage and facetime back.  I was about ready to give up on Apple and go get a different phone ~

  • I am not able to sync my ipod 4g with itunes.

    I am not able to sync my ipod 4g with itunes. Says unable to "load data class"!!!! Please help!!!!! SOS!!! I have tried every possible trick present in google!!! But nothing helped!!!!
    Below is what I tried from the threads on google!
    I do not have a folder called "SyncServices" in my HDD!
    Sync process is not shown in the task manager!
    I have tried renaming/copying the "sqlite3.dll" but yet nothing worked!
    I reinstalled i tunes 8 times!
    I degraded itunes ASWELL!
    I tried restoring!
    I tried erasing Sybc history!
    (You may noe have an idea how ****** I may be!!!)
    Please for gods sake help me fixing this out!! I can wait to sync my stuff!

    I finally solved this problem my self!!
    There is no other way to get this sorted than to re-install windows. It may be some corrupt windows file that causes this error.
    TIP- If you do not want to erase all the data on your PC reinstall windows on another empty drive thus making your computer run on dual OS's.

  • HT1386 my itunes does not recognize my ipod. I am not able to sync anything because it is not found. What can i do to be able to sync my ipod with itunes?

    I need help, my ipod touch is not being recognized by my itunes. I am not able to sync anything cause it is not found. What do i do?

    If the unit has NEVER been jailbroke, first try a system reset.  It cures many ills and it's quick, easy and harmless...  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • I need to use agilent34970A with serial cable;but i'm not able to build a routine.

    Hi, i'm learning labview and i'm not able to build a routine to communicate with my Agilent34970A with serial cable only and to use the data. Anyone can help me? thanks. lucky

    Are you using the driver from the LabVIEW Instrument Driver CD or that you downloaded from here? If you are, what problems are you having? Are there error codes generated and what are they? Have you verified that the serial cable is correct and the the comm parameters (baud rate, stop bits, etc.) are the same in the program and the instrument?

  • I recently had to reinstall iTunes, and now it won't recognize my iphone so Im not able to sync my phone to iTunes.  How do I fix this?

    I recently reinstalled iTunes, and now it won't recognize my iphone so I'm not able to sync the phone with iTunes.  How do I fix this?

    It has been shown there are problems with the latest update of iTunes and Windows computers. What you need to do is remove and reinstall iTunes, and make sure that you follow the steps in this support document exactly. http://support.apple.com/kb/ht1923. If you do not follow them exactly, you will just compound your problems. Once you do this, you should have no trouble having the phone recognized in iTunes.

  • Not able to sync my iphone with itunes

    hi,
         i am having problem in syncing my iphone to itunes,at first the auto sync process starts as i connect my iphone5(ios 7) to my itunes(latest version).it says"the iphone could not be synced because this computer is no longer authorised for the purchases items that are on the iphone (authorise this computer from store> authorise thi computer)."
    when i authorise my computer is says " this computer is already authorised". when i again try to sync my phone it gives me the same error..

    I found the solution to this problem
    the apple service helped me actually
    the best and the esiest way is to solve this problem  :
    create a new account (as an administator recomended) 
    Bonjour  servises must be enabled ( go to control panel > administartive  tools> sevices> Bounjour services (change the category to large  icons if you dont see administartive tools )
    install itunes
    sign in
    authorize
    SYNC
    it must sync normally
    but  if the meesage pops up that points on a particular items that could not  be synced ( to ur itunes because you are not authorized for this items )  REMOVE THEM
    creating a new user account shows the items wich dont let you sync your iPhone
    after you REMOVE those **** items that were not authorised , you can go to your old user account and SYNC it as old kind time
    was  having this problem 2 weeks , and nothing helped except this was. not  deleting the SC Info folder, now copying apple folder to some other  mobile divce folder
    REMEMBER  the problem is in your iPhone , it is about the items that are in your iPhone
    Thanks to Apple service
    for anyone who needs othe heple you r welcome to ask
    will hepl you with a pleassure cause i know how I felt this days:)

  • My songs are missing in the music and the used memory doesn't change. Is it a bug for IOS7? How can I fix it?

    I plugged my ipod touch 5 via usb to the pc and browsed my music on itunes. And suddenly i played some music and there's a exclamation point before the song. I haven't deleted that song or moved. And the whole album was gone. And i checked the number of songs on my ipod and it decreased without change in memory used. Is it an another BUG for ios7? is there a way to fix it?

    That indicates the song files are not corrupted.
    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    What is the Other on my iPhone and How to Remove It
    An large "other" usually indicates that the "other" includes corrupted files.
    First try:
    "First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
    as recommended by:
    How do I get rid of "other" storage: Apple Support Communities
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • I am not able to sync my ipod touch with itunes.

    Hi,
    Whenever i try to sync my ipod touch with itunes. I get the an error "The ipod could not be synced because the sync session failed to start".
    The sync process could not be started.
    I am facing these issues from the day when i upgraded my ipod touch to ios 5.0.1
    itunes version on my PC: 10.5.1.42
    Operating system: Windows XP SP2
    Please let me know how can i overcome this problem.

    Take the old hard drive and try one of the data recovery programs like Data Rescue 3 and others.
    Apple didn't in the past support re download of purchased material.
    And there are so many ways to backup data, clone a drive, archive, from the free to the built-in to the more expensive.
    I keep the OS on one drive, media files and data on another drive, and a good 1.5TB drive today costs $109. Paragon has backup, clone (makes a full boot drive, not an 'image' such as Acronis or Ghost) so you can use it almost like a daily or weekly mirror.
    Depends on the software and data lost and cost of recovery programs and services, but it may be possible. Put the drive in a USB case perhaps and a new drive to recover the files to.

  • Problem: not able to sync photo's from iTunes 9.1.1 to my iPhone

    In iTunes version 9.1.1 no tab appears with the name 'photo's'. How am I able to upload photo's from my computer to my iPhone? Is it a error in the software or something else? I already removed iTunes from the computer and reinstalled it. It doesn't make any difference.
    Can somebody help me?

    I am concerned about that. However, iTunes did sync all photos to the ATV including some of the photos in question before it stopped. There are about 25 photos I imported to get the iPhoto library up to date. Tonight, I will delete the 25 photo's and see if that fixes the problem.
    FYI- during the import of the 25 photo's, my wife closed iPhoto prior to ejecting and turning off the camera. I was hoping that was the reason but the 25 photo's all work properly in iPhoto????

  • I have a new iPad Air but I am not able to sync any non-iTunes purchased movies between my Mac and the iPad. My old iPad still syncs correctly.

    I have tried all the advice from the forums such as editing the info in iTunes, adding playlist, changing the info categories, ensuring there is adequate iCloud backup space,  but to no avail. I suspect the issue is with an iPad setting or with iCloud as this is only a problem for the new iPad and not the old one but cannot see where anything differs from the old iPad settings. Any dieas welcome.

    gomozzie wrote:
    Hi Demo, I am back, so here is my result.
    On my PC I signed out of itunes and deleted the software and then downloaded again.
    It appears, at this stage to be working OK. It has allowed me to do a restore and backup, fingers crossed xxx.
    That is a very good sign.
    The happy result is, I have not been arrested and my computer is intact, so far.......
    Thanks for trying to help..
    I'm happy to hear this news. Sorry that I couldn't help, but you are quite welcome anyway.

Maybe you are looking for

  • Linking existing Essbase Cube to Planning

    My business team created an Essbase cube, and now they want us to link that cube to Planning. I opened an SR and I was told the following: 1. Ensure you have a test environment to create this new Planning app before moving to production. 2. Create a

  • Why can't I log out of Itunes on my ipod

    My ipod has two itunes accounts on it. One I know the password to and the other one I don't. After I tap log out of itunes on my ipod and go to update my apps it still says that im still logged into the account that I dont know the password to.

  • Project server online workflow using visual studio

    hi sir, I am working on project online 2013(office 365).I have create a workflow with sharepoint designer also.but i have need to create workfow in project online using visual studio.please suggest me.and deploy as it wsp file. vijay

  • Materiazed view with fast refresh

    Hi All, I want to create a Materialized view with fast refresh. I think for fast refresh we need to set up a materialized view log first before the MV gets created. Can someone please provide the steps and the syntax to do this? I am new to MV creati

  • Group Policy Printer Error

    I am getting the following warning in my Application Log: Code Snippet The user '<Printer Name>' preference item in the 'Default Domain Policy {31B2F340-016D-11D2-945F-00C04FB984F9}' Group Policy object did not apply because it failed with error code