We are currently having troubles with our iTunes. Playing different songs and randomly it changes the name of the song to pink time after time. We could go through 5 songs before it will change the next one to song title time after time and artist pink

Hi I am having trouble with iTunes! Randomly when I click on a song in iTunes it changes the song title to time after time and the artist is pink.
I could click on 4 songs and they will be normal but then the 5th one will change the info to time after time.
I haven't done anything different or new, it started doing it all of a sudden, well that I have noticed anyway. Please help.

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

Similar Messages

  • TS1292 I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have-repeatedly. How can I redeem my iTunes voucher?

    I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have…repeatedly. How can I redeem my iTunes voucher?

    If the card was issued in the same country as you and your account are based and the page that you posted from doesn't help, then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • I am having trouble with my iTunes recognizing my iPad. It recognizes my iPhone just fine, and I have gone through the entire troubleshooting section. Anyone have any possible solutions?

    I am having trouble with my iTunes recognizing my iPad. It recognizes my iPhone just fine, and I have gone through the entire troubleshooting section. Anyone have any possible solutions?

    Device not recognized by iTune
    http://support.apple.com/kb/TS1591

  • EntaOk, I am atuallually having troubles with my itunes music card. I accidlly scratched a letter off. i want to get my card to work. how? thank you.

    Ok, I am actually having troubles with my itunes music card. I accidentally scratched off a letter. how can i get my card to work without the actual code? thank you.

    Yu can try contacting iTunes. See the iTunes Cards abd Code topic of:
    Apple - Support - iTunes

  • Having trouble with my iTunes/apps

    Having trouble with my iTunes/apps

    How did you fix it cause with mine I bought an iTunes card to get music and apps and it's telling to give a credit card.

  • I am currently having trouble with an attached PDF fill-able form created in Acrobat being non savable in Reader

    Hello, I was wondering if you would be able to help me out?
    I am having trouble with my attached PDF fill-able form, I am creating a form that has a limit of one page so in order for more room in a certain field I have added a Hyperlink to an additional fill-able(secondary) form within the Parent document (primary fill-able form. The secondary form is inserted as an attachment into the Primary form. My problem is when I open this document up in Adobe Reader, the Primary fill-able form is savable but the attached Secondary form for which the hyperlink leads to is non-savable and is a must print only. Is there a way to make the Secondary form savable as well within the same document? or is there another way I could execute what it is I am trying to achieve?
    Trying to save other as extended reader has not worked, also if I save the attachment file as an extended reader first I am unable to attach a return hyperlink back to the Parent document,
    Help would be greatly appreciated please and thank you!

    I can't say for certain without looking at the actual PDF but it does appear that they created one large text box over multiple lines. For a fillable form it may have been smarter to remove the lines and create a box with smaller text that supports multiple lines.
    At any rate, nothing you can do about it with the free Reader (and depending on the security, maybe nothing with Acrobat either.)

  • I am currently having trouble with an attached PDF fill-able form...Help Please

    Hello, I was wondering if you would be able to help me out?
    I am having trouble with my attached PDF fill-able form, I am creating a form that has a limit of one page so in order for more room in a certain field I have added a Hyperlink to an additional fill-able(secondary) form within the Parent document (primary fill-able form. The secondary form is inserted as an attachment into the Primary form. My problem is when I open this document up in Adobe Reader, the Primary fill-able form is savable but the attached Secondary form for which the hyperlink leads to is non-savable and is a must print only. Is there a way to make the Secondary form savable as well within the same document? or is there another way I could execute what it is I am trying to achieve?
    Help would be greatly appreciated please and thank you!

    Here is the code, thought I had put it in the first time, guess not heh. Anyway, I converted the arrayList(accountList) to a String so that I could see the that element I am trying to index is in there, which it is. I also checked the file that i'm populating the arrayList from and it also has the element in it.
    public static void getAccountNumbers() {
              accountList = LoadStoreAccounts.readCollectionObject();     
              accountInfo = accountList.toString();
              JOptionPane.showMessageDialog(null, accountInfo);
              acctNumIndex = accountList.indexOf(accountNumber);
              acctIndex = String.valueOf(acctNumIndex);
              JOptionPane.showMessageDialog(null, "Index of accountNumber    is: " + acctIndex);

  • Having trouble with synching (iTunes/iPhone) & Security software

    I use ZoneAlarm Security Suite on my PC.  Ihave been using iTunes/iPhone successfully for a couple of years with this software, but after the most recent iPhone o/s upgrade I get communications errors that prohibit my iPhone from syching properly.  It often comes up saying that I need to restore my iPhone.
    Any suggestions on firewall settings that may be causing these issues?

    Find a new friend. If you don't have access to the last computer your phone synced with, you will have to force your phone into recovery mode & restore it as a new device to remove the passcode. All data on your phone will be lost:
    Turn the phone off using the Sleep/Wake button, then the slide to power off. If you are unable to do that, press and hold the Sleep/Wake and Home buttons at the same time. When your phone turns off, release the Sleep/Wake and Home buttons. Then, leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, you will only be able to restore as new.

  • I am having trouble with updating Itunes

    Hi can anyone help me out with this. The other day I tried to update my Itunes from 11.1.3 to 11.1.4. The update wasn't successful. I then tried to update via the Itunes website however that led me to a error message. That message said "Service apple mobile device. (Apple Mobile Device) Failed to start. Verify that you have sufficient privileges to start system services."
    Another thing that I tried was restarting my computer and that didn't help with the issue. I uninstalled Itunes and I am still getting the above error message when I am attemping to reinstall it.
    Has anyone else had this issue? If so is there anything that was done to resolve the issue? Everything with my itunes was working fine until I tried to update it.

    Hello, JRA24ever. 
    Thank you for visiting Apple Support Communities. 
    I think the best option would be to completely uninstall all components of iTunes in the order specified of the article below.  Once this is done attempt to install iTunes again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    If the issue persists, try the steps in the article below. 
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/ts1567
    Cheers,
    Jason H. 

  • I am having trouble with our Comcast e-mails. Going thtough the internet oprion they are fine, but not through your website.

    When using your website to access Comcast and our e-mails the e-mails are disorganized and words above them are out of line. If I access Comcast through internet explorer the inbox and e-mails are normal. I have re-booted the computer countless times and reset the modem to no avail. It appears that the issue is with Firefox.
    == This happened ==
    Every time Firefox opened
    == Yesterday, 5/3/10.

    Same issue, not sure of resolution, have downloaded latest version of firefox.

  • I am having trouble with my iTunes acct

    my itunes acct will not take my credit card information. It keeps tellimg me my secuirty card is invaild, and i really need to update my apps.

    Hopefully, you waited a bit.
    Theres one way to truly make sure you are in the clear when you delete iTunes. Open up iTunes, the go to the top left under File. Click on it, the go to Library. What you will want to do is backup your Library by Consolidating the files (it will make a new folder in the Music section on your Computer), and you'll want to keep the original files where they are, but go with the option at the top (1st one it should be actually). If anything goes wrong, you'll still have all of your music, and you'll just need to add the folder(s) to your new library.
    -This Guy

  • Having trouble with updated iTunes - iPod Nano 1st Gen.

    My iPod Nano [1st Generation] won't update or anything with iTunes 7.0!!! It worked with iTunes 6, but I downloaded 7 and it messed up my iPod - I tried deleting iTunes 7 and redownloading 6, but when I finished doing that, and I tried to get 6 to load, a window popped up that said "'iTunes Library.itl' cannot load because it was created on an updated version of iTunes" or something along that line. So now my songs are completely gone, I have NOTHING on my iPod because I had to delete iTunes 7... WHAT DO I DO!?!?!?!?!?!

    I tried to get 6 to load, a window popped up that said "'iTunes Library.itl' cannot load because it was created on an updated version of iTunes"
    the following post might be of some help with that:
    b noir: Re: How can i access my itunes library now ive gone back to 6.5 from 7?

  • I am having trouble with old Itunes account on my new computer

    All of my new music will not sycn onto my computer's itunes account. The itunes account is not even recongnizing my iPod. What do I do from here?

    RR,
    Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
    Jerry

  • Was having trouble with my itunes recognizing itouch.

    My i touch shows the usb plug and the itunes symbol but itunes on my macbook wont recognize that ive plugged it in. i did the whole sleep and home button thing to get to the plug symbol but still nothing.  I checked and my itunes is up to date, my other apple products are recognized like iphone and ipad also.

    Try here:
    Place the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Do you have OSX 10.5.8 or later?
    These may help but i doubt it since the computer sees the other iDevices.
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Hello, i'm having trouble with installing iTunes.

    There appears an error, saying - 'policy.8.0.Microsoft.VC80.CRT.type="win32-policy".version="8.0.50727.6195".pub licKeyToken="1fc8b3b9a1e18e3b".processorArchitecture="x86"
    I\ve tries everything, but nothing helps(

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Maybe you are looking for

  • Getting Back Values from Shift Register from Other Loop (FPGA)

    Referring to the picture above, both while loops are inside one while loop (not shown in picture). Problem is im trying to execute the numeric control once only and use the value from the second loop after that. I tried many ways and still have no id

  • Error in running package with config file

    I have a 2012 package and it is referring to a config file which has the DB connectionstring. This config file was created through the "Package Configuration Organizer". When I execute the package through VS 2012, it works fine(Reads the config from

  • Markup problem with special characters

    Hello everybody, I'm using Oracle 8.1.5 with InterMedia Text. The search is fine, the markup is basically fine, too. But sometimes search words are not marked up: query="wurde%20als" -> correct result: "wurde als" is highlighted (incl. the space) que

  • Exactly what can I display on my TV using the Apple Composite AV Cable?

    I bought a set of composite AV Cables to hook my iPad2 up to an older TV to watch movies that I had downloaded or ripped and installed on my iPad when I was travelling. I am curious to know if there it is possible to duplicate the iPad's screen on th

  • Alerts in interaction center

    Hi Friends, I am working on alerts now,help me what are the configuration settings involved in interaction center for alerts. currently working on CRM 7.0 Regards Kishore Moderation: Please, check help.sap.com Edited by: Joaquin Fornas on Feb 16, 201