We are getting ODBC Error while connection to Universe?
HI,
While creating a report i am getting following error. Please give me solution for that.
Check your system ODBC Data source administrator.
Control panel-->administrative tolls-->ODBC Data source administrator.
If your data source not added earlier, then add now. You will not get any error.
Regards,
Chandrakanth.
Similar Messages
-
Getting the error while connection to SAP Server
Hi,
I am getting the below mentioned error while connection to SAP Sever using SAP.Net Connector. What could be the possible reason?
"<i>
<b>Connect to SAP gateway failed
Connect_PM GWHOST=ia2-ms.boi.hp.com, GWSERV=sapgw01, ASHOST=ia2-ms.boi.hp.com, SYSNR=01
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host 15.78.80.31, service 3301)
TIME Fri Feb 02 11:10:35 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8716
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER</b>
</i>"Hi
The gateway monitor is used to analyze and administer the SAP Gateway from outside the SAP System. The profile you assign to it must be the same as for the gateway. This process has different names:
UNIX: gwmon
Windows: gwmon.exe
more on this.. please go thru ..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/bb/9f13c24b9b11d189750000e8322d00/frameset.htm
hope this info helps!
with regards,
raj.
<i>pls, award points</i> -
Getting Java error while connect BEx query to WebI report (SAP BI4.0 )
Not able to connect BEx query to WebI report (SAP BI4.0 ) . Below is the error I get while creating a new BEx connection to BOBJ WebI report .
Please find the below error and help me ,
"Select a BW Bex query window box " displayed "Nothing to display " and server error as mentioned below
Java.uti.concurrent.executionException: Com.sap.sl.sdk.repository.service.repositor******
at Java.uti.concurrent.futuretask (Unknown source )
at java.swing.swing.timer.fireactionperformed(Unknown source )
at java.awt.event.invocationEvent.dispatch(Unknown Source)
Thanks ,
Pradeep GorpaduHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Getting An Error while connecting to SAP :InComplete logon data
Hi
I trying to get the tables of SAP using Sapproxy class ,but enable to get the table from SAP Table..
and also using SAP Connector 2.0.1 to connect the .net ,I got the SAP function and I write the code for it but enable to get the data in from the SAP
I am binding the data to the data grid
it is displaying the error like:
SAP.Connector.RfcLogonException: Incomplete logon data.
How to fix the problem ? suggestion please
Thanks1.check your hibernate.cfg.xml file and make sure you use "xwiki/xwiki" as the username and password.
2.make sure you have create "xwiki" tablespace in your oracle db.
B.R
Han -
Getting an error while connecting to Oracle10g
Hi ,
I have downloaded the latest Xwiki source code and build it using mvn.
I have deployed the .war file (which was generated in xwiki-platform-web/
folder) into weblogic server and i have changed the hibernate-cfg.xml file
in web-inf/ folder, and i placed the oracle driver in lib.
then i stared the server and run the url http://localhost:70001/xwiki/ and
clicked on "Xwiki home page" link then its giving the following error.
Error 500--Internal Server Error
com.xpn.xwiki.XWikiException: Error number 3 in 0: Could not initialize main
XWiki context
Wrapped Exception: Error number 3005 in 3: Migration failed
Wrapped Exception: Error number 0 in 3: Exception while hibernate execute
Wrapped Exception: Unknown entity:
com.xpn.xwiki.store.migration.XWikiDBVersion
at com.xpn.xwiki.XWiki.getMainXWiki(XWiki.java:250)
at com.xpn.xwiki.XWiki.getXWiki(XWiki.java:400)
at com.xpn.xwiki.web.XWikiAction.execute(XWikiAction.java:94)
at
org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at
weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
at
weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
at
weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at
com.xpn.xwiki.web.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:117)
at
weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3212)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1983)
at
weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1890)
at
weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1344)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
please help me out to solve this issue.
Thanks in Advance,
SAi kumar1.check your hibernate.cfg.xml file and make sure you use "xwiki/xwiki" as the username and password.
2.make sure you have create "xwiki" tablespace in your oracle db.
B.R
Han -
Getting "ORA-12514 error" while connecting first time
Hi,
Getting below error while connecting to the database first time.
ORA-12514: TNS:listener does not currently know of service requested in connect
apludc01dat25:e2cmpc1 > tnsping ora37_ap
TNS Ping Utility for Linux: Version 10.2.0.5.0 - Production on 26-MAR-2012 12:00:58
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
/grid/product/crs/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = apl11764clu01-scan-oravip.nat.bt.com)(PORT = 61901)) (CONNECT_DATA = (SERVICE_NAME = ORA37_ap))
OK (0 msec)
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:15 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
Enter user-name:
apludc01dat25:e2cmpc1 > sqlplus
SQL*Plus: Release 10.2.0.5.0 - Production on Mon Mar 26 12:00:22 2012
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Enter user-name: outln@ora37_ap
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
SQL>
Please help me out to resolve this issue.
Thank you.
Regards,
DasarathHi,
We are getting this error while connecting remotely.
PFB output of listener status and services
apl11764a001:ORA37a > lsnrctl services LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:06
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:2 refused:0 state:ready
LOCAL SERVER
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: apl11764a001, pid: 25970>
(ADDRESS=(PROTOCOL=tcp)(HOST=apl11764a001)(PORT=10862))
The command completed successfully
apl11764a001:ORA37a > lsnrctl status LISTENER_ORA37
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 26-MAR-2012 12:18:20
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_ORA37)))
STATUS of the LISTENER
Alias LISTENER_ORA37
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 26-MAR-2012 12:15:17
Uptime 0 days 0 hr. 3 min. 2 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /grid/product/crs/network/admin/listener.ora
Listener Log File /grid/product/crs/log/diag/tnslsnr/apl11764a001/listener_ora37/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_ORA37)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.4)(PORT=62037)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.25.169.7)(PORT=62037)))
Services Summary...
Service "ORA37_ap" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37_ap_XPT" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
Service "ORA37aXDB" has 1 instance(s).
Instance "ORA37a", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you.
Regards,
Dasarath -
Hi,
We are getting the error while connecting the database.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
IBM AIX RISC System/6000 Error: 2: No such file or directory
Error persists only for second or two & again connection comes back.
NOTE-- When this happens only new connection recives the error while existing connection work properly.
On metalink the error description is.
Cause: Unable to locate shared memory realm
Action: Verify that the realm is accessible
also I have checked
SQL> select resource_name,current_utilization,max_utilization,limit_value from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION LIMIT_VALU
processes 1044 1091 1100
sessions 1052 1097 1400
enqueue_locks 208 437 17404
enqueue_resources 248 335 UNLIMITED
ges_procs 0 0 0
Kindly advice urgent.IBM AIX 5L
10.2.0.3
Client OS is Windows XP & oracle client using is oracle 8 & 9i client.
TNS Entery of client
AIX.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1521))
(ADDRESS = (COMMUNITY = tcp.world)(PROTOCOL = TCP)(Host = 192.168.16.50)(Port = 1526))
(CONNECT_DATA =
(SID = ORCL)
There is only one oracle home on the client mechine
entries in sql* net are
names.directory_path = (TNSNAMES)
names.default_domain = world
name.default_zone = world
names.default_domain=world
erro in the listener log is
18-MAY-2009 16:42:25 * (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=UdyogGrid.Exe)(HOST=Windows NT PC)(USER=vmittal))) * (ADDRESS=(PROTOCOL=tcp)(HOST=221.135.27.180)(PORT=2021)) * establish * ORCL * 0
18-MAY-2009 16:42:33 * ping * 0
WARNING: Subscription for node down event still pending.
NOTE-- Problem started from the day we have set the password for the listener.
Kindly advice.
Edited by: Sachin A on May 18, 2009 10:08 PM -
ERROR WHILE CONNECTING COMPANIES TO SERVER IN VISTA CLIENTS
Hi All !
We upgraded one of our client to 2007A. Only 2 client machine are getting an error while trying to connect them to server. Connection Error. SQL state 08001. Error de SQL Server: 21. Microsoft SQL Native Client No se admite el cifrado del cliente. Thanks
Regars
claudiaHi:
The complete error is the following: Error en la Conexión. SQL state 08001. Error de SQL Server: 21. Microsoft SQL Native Client No se admite el cifrado del cliente. Error en la Conexión. Error de SQL Server: 21. Microsoft SQL Native Client El cliente no pudo establecer la conexión.
Error en la Conexión. SQL state 08001. Error de SQL Server: 0. Microsoft SQL Native Client Error al establecer la conexión con el servidor. Cuando se conecta SQL Server 2005, la configuración predeterminada de SQL Server 2005 no permite conexiones remotas.
REGARDS
CLAUDIA -
Error while connecting to HTTPS WebService through Jdev
I am having issues while trying to connect to a webservice that require SSL. Has anybody seen similar exception below or any suggestion/best practice docs of how to setup the cert?
WARNING: Unable to connect to URL: https://itsolutions/AppIntegration/org/test/sendRequest.jpd due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
java.rmi.RemoteException: ; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested targetDear All,I am getting this error while connecting to ASDM Please help.Your ASA Image has a version number 8.2.1 which is not supported by ASDM 6.1(3)Show Version.....User Access VerificationPassword:
Type help or '?' for a list of available commands.
ASA-PT> en
Password:ASA-PT# show verCisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.1(3)Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"ASA-PT up 12 days 0 hoursHardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KBEncryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 0024.14d2.1582, irq 9
1: Ext: GigabitEthernet0/1 : address is 0024.14d2.1583, irq 9
2: Ext: GigabitEthernet0/2 : address is 0024.14d2.1584, irq 9
3: Ext: GigabitEthernet0/3 : address is 0024.14d2.1585, irq 9
4: Ext: Management0/0 : address is 0024.14d2.1581, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
<--- More --->ThanksTabrez
Hi Tabrez,
ASA5520 version 8.2.1 is supported with ASDM 6.2(1 and above). Recommended: 6.2(3).check out the below link hope that c;ear out your query !!
http://www.cisco.com/en/US/docs/security/asa/compatibility/asamatrx.html
If helpful do rate the post
Ganesh.H -
Error while connecting to DB's - java.lang.NullPointerException
I am getting this error while connecting to any db using SQL dev.
1. I was able to connect to all before something happaned (unrealted install/uninstalls)
2. I also have two errors in the "Logging Page- Log" window
I have seen this errors in other threads, but dont think thay have a resolution to this.
Let me know if any other info is required and I will append to this thread.
-MAIN ERROR-
java.lang.NullPointerException
at oracle.dbtools.raptor.conntypes.RaptorClassLoader.findClassLoader(RaptorClassLoader.java:48)
at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnectionImpl(RaptorConnectionWrapper.java:213)
at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:171)
at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:202)
at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:68)
at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:1004)
at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:876)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
at java.lang.Thread.run(Thread.java:619)
-Two ERRORs in the log window-
1 ------------------
SEVERE 88 0 oracle.jdbc.driver.OracleDriver Error while registering Oracle JDBC Diagnosability MBean.
2---------------
SEVERE 95 63 oracle.ideimpl.extension.AddinManagerImpl Failed to create addin oracle.report.addin.ReportAddin
Thanks
-SJInterestingly when I go to Preferences/Database I get this error:
Internal Error when attempting to create this panel: - Do you think I should just reinstall the whole thing?
java.lang.NullPointerException
at oracle.dbtools.raptor.config.AdvancedInfo.onEntry(AdvancedInfo.java:40)
at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:921)
at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:894)
at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:104)
at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1343)
at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1211)
at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1205)
at javax.swing.Timer.fireActionPerformed(Timer.java:271)
at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:177)
at java.awt.Dialog$1.run(Dialog.java:1045)
at java.awt.Dialog$3.run(Dialog.java:1097)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Dialog.show(Dialog.java:1095)
at java.awt.Component.show(Component.java:1422)
at java.awt.Component.setVisible(Component.java:1375)
at java.awt.Window.setVisible(Window.java:806)
at java.awt.Dialog.setVisible(Dialog.java:985)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:202)
at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:795)
at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:580)
at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:47)
at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:265)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:571)
at oracle.ide.controller.IdeAction$2.run(IdeAction.java:804)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:823)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:521)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1220)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1261)
at java.awt.Component.processMouseEvent(Component.java:6041)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5806)
at java.awt.Container.processEvent(Container.java:2058)
at java.awt.Component.dispatchEventImpl(Component.java:4413)
at java.awt.Container.dispatchEventImpl(Container.java:2116)
at java.awt.Component.dispatchEvent(Component.java:4243)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4322)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3986)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3916)
at java.awt.Container.dispatchEventImpl(Container.java:2102)
at java.awt.Window.dispatchEventImpl(Window.java:2440)
at java.awt.Component.dispatchEvent(Component.java:4243)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:121) -
I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.
There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices -
Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
KrishnaYS,
Here are my time profile settings
Level Name Display Horizon - Past Display Horizon - Future
1 Monthly -6 11
2 Quarterly -2 3
3 Yearly -1 2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna -
I am getting error while connecting to sqlplus by using apps account in 11i
i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
[applmgr@appsc05t01 admin]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Raoyes.
login as: gorantla
[email protected]'s password:
Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
[gorantla@appsc05t01 ~]$ sudo su - applmgr
[applmgr@appsc05t01 ~]$ ora_setup
Available databases:
x = ATUXX
y = ATUYY
z = ATUZZ
Select database: \c
y
ORACLE_SID=ATUYY
IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
APPL_TOP=/apps/ATUYY/atuyyappl
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$
[applmgr@appsc05t01 ~]$ tnsping ATUYY
TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
OK (0 msec)
[applmgr@appsc05t01 ~]$ sqlplus
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: apps
ERROR:
ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
Enter user-name:
Thanks
Rao -
While updating my iphone 4 to 5 I'm getting an error message 'connection is timed out. please check your internet settings' whereas my connection is very much active. Any suggestions!
Check to see if you anti-virus software running, that will at times interfere with the connection with the Apple server.
-
Getting error while connecting Utility Customer E-Services
I am getting the following error while connecting to Utility Customer E-Services through the browser.
Error: Your user master has not been created correctly. Contact your system administrator.
Please advise some fix for this problem.
Thanks in advance.
Regards,
NitinHi Mattia,
yes, I had resolved this problem. It requires some configuration in ume database of the WebAS, where UCES application is hosted.
1) Create a user in ume.
2) Assign group "Everyone" and "Authenticated Users" to the user
3) Within Customized Information tab, create the mapping between your web user, reference user and business partner.
fscm_refuser: Use reference user id. ( user id to login to ISU system )
objtype_0: BUS1006
objkey_0: User business partner details ( business partner number in ISU)
If there is no customized Information tab, then open visual administrator and do the following.
1) Navigate to Services->Configuration Adapter
2) Click on Runtime tab -> Display configuration
3) Navigate to cluster_data -> server -> cfg -> services -> Propertysheet com.sap.security.core.ume.service
4) Add the following in ume.admin.addattrs.
com.sap.security.core.user.refuser:fscm_refuser;com.sap.security.core.user.references:objtype_0;com.sap.security.core.user.references:objkey_0;com.sap.security.core.user.references:objtype_1;com.sap.security.core.user.references:objkey_1;com.sap.security.core.user.references:objtype_2;com.sap.security.core.user.references:objkey_2;com.sap.security.core.user.references:objtype_3;com.sap.security.core.user.references:objkey_3;com.sap.security.core.user.references:objtype_4;com.sap.security.core.user.references:objkey_4;com.sap.security.core.user.references:objtype_5;com.sap.security.core.user.references:objkey_5;com.sap.security.core.user.references:objtype_6;com.sap.security.core.user.references:objkey_6;com.sap.security.core.user.references:objtype_7;com.sap.security.core.user.references:objkey_7;com.sap.security.core.user.references:objtype_8;com.sap.security.core.user.references:objkey_8;com.sap.security.core.user.references:objtype_9;com.sap.security.core.user.references:objkey_9;com.sap.security.core.useces:objtype_10;com.sap.security.core.user.references:objkey_10;com.sap.security.core.user.references:objtype_11;com.sap.security.core.user.references:objkey_11;com.sap.security.core.user.references:objtype_12;com.sap.security.core.user.references:objkey_12;com.sap.security.core.user.references:objtype_13;com.sap.security.core.user.references:objkey_13;com.sap.security.core.user.references:objtype_14;com.sap.security.core.user.references:objkey_14;com.sap.security.core.user.references:objtype_15;com.sap.security.core.user.references:objkey_15;com.sap.security.core.user.references:objtype_16;com.sap.security.core.user.references:objkey_16;com.sap.security.core.user.references:objtype_17;com.sap.security.core.user.references:objkey_17;com.sap.security.core.user.references:objtype_18;com.sap.security.core.user.references:objkey_18;com.sap.security.core.user.references:objtype_19;com.sap.security.core.user.references:objkey_19;
5) Save the changes, exit visual administrator and restart the server.
Now. your application will work perfectly fine.
Maybe you are looking for
-
Table date format - How can I display Week 1, Week 2, instead of the date?
I would like to creat a table for my Gantt, that displays the week number unit, as I have as the middle tier in my timescale on the Gantt side of the view. I cannot find how to do this anywhere. I know I can change the way the date is displayed, fo
-
Error during creating a work center
Hello everyone, I am creating a work center and i get the error , activity type not set up in cost center ( error message cr061) . I tried doing all the possible settings , tried in kp26/kp27 . but didnt work . Can anyone give me the solution . thank
-
My iPhone 4 is Turning of and changing dates. How I can solve it?
My iPhone 4 is turning off and changing dates Aline also. How I can fix it ?
-
LXDE panel menu does not display in regular user mode
Hello All, Running arch on eeepc 1000HE. Running openbox with lxde. The menu on the panel does not display when in a regular user mode, but does display when in su mode. The button for the menu displays but when pressed the menu is blank. It seem
-
Outlook does not have any duplicates in Contacts, Calendar, or Notes yet when synced to IPhone get duplicates in all three Reset Phone, delselected all three and resynced no help. Removed all three from Outlook and synced and all three were now empty