We are moving to CF11 and setup 2 websites exactly and both website provide exactly same components - but one is giving error - 500 - 64 bit/34 bit issue
I think the WSCONFIG folder for other site is 2 and I created VD jakarta to point to 2. for the site I am seeing issue - it is pointing to 1 and seeing some restriction file.
I tried to create multiple times new site so it creates and point to new folder in wsconfig, but everytime it is pointing to 1.
is there anyway I can manually update ?
This site has .NET componenets, if I enable 32 bit - my CFM pages give above error, IF I don;t enable .NET is giving an error.
but, this issue is not there on the other site on same VM.
mu problem is similar to the below issue noticed in this forum, only thing is I have 2 websites and one is working properly - only the second one has this issue...is there any way without reinstalling IIS?
CF11 install problem on WIndows server 2012 R2
This question has been Answered.
rg25654200 Mar 24, 2015 6:26 PM
Similar Messages
-
I have an Airport Extreme, the light is only flashing amber and won't go solid green. I use my ipad 2 to try and setup the Airport and I keep getting "an unexpected error occured, try again." I've tried my iphone 4 with the same result. I've tried the utilty on my pc and same result. The airport is producing a great wireless signal and working to all devices. I really just want to get in and set the password.
eddiedaly wrote:
I have reset several times with no success.
When you did those resets, did you continue to hold in the reset button until the status light blinked several times? If you didn't, then you didn't do a full reset.
Here's what I do to reset an AirPort base station: I unplug it, press in the reset button, then, while continuing to hold in the reset button, I plug it in. (Yes, doing this can be easier for people with more than two hands!) I then watch the status light and wait until it flashes rapidly several times.
I have a Time Capsule that I couldn't configure at one point. To recover from that I had to unplug it for many hours. You might try unplugging your unit overnight.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your original message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that. -
I have two ipod nanos. And i have 2 itunes accounts and we are accessing both accounts from the same PC. One of my ipod works fine, it gets detected as a device and sync fine. The other one does not. Anyone knows what this may be?
The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one. -
My family has an Apple ID and I also have one and I got apps on an iPhone with my Apple ID but I'm giving it away and erasing it an I want to put my account on my iPod and keep my apps and progress from family Apple ID can I do this keeping family iCloud
Open itunes, connect iphone,select what you want, sync
-
have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem
Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 Do you see the AirPlay icon on the menu bar? If not, restart the router -
Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?
downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.) -
I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems. -
I really hoped you would fix the security policy issue in release 4. I have to close Firefox and use IE9 to maintain a website I built with Network Solutions and I'd much rather not have to endure the slowness of IE. I also have websites with Wix and WEBS and have no problems at all using cut and paste with them.
Did you have it connected to the library mac when it froze? If so, why? I would be hesitant to hook my ipod to a unprotected public computer since it may be infested with viruses or have unknown hardware problems.
In any case, if you can get it to an Apple store they can probably help you with it, it sounds like it needs replacing.
A certain percentage of any complex product will turn out to be defective and will have to be returned, it sounds like you were unlucky enough to get one. Looking over the forums here it may seem like the ipod is plagued with bugs, but don't forget that there are millions who never have a problem and so have no reason to pipe up here. Personally I think Apple deserves a thumbs up for continuing to host these forums in spite of how they may cast a negative light on thier products to the casual observer.
5G 60GB Black iPod Windows XP Pro -
[Solved] installation and setup question - gummiboot and EFI
Hi,
This is the first time i'm installing arch. i hit the below issues. hope someone can help me out. my understanding of uefi is just about an hour worth of reading or less..
(the wiki didn't mention the kernel requirement when I started installing it... now it does and i updated the beginner's guide wiki post.)
Problem
Gummiboot#Installing says that "If you are still running kernel 3.7 or have not booted in EFI mode, creating the boot entry will fail. You should however still be able to boot gummiboot as it copies the binary to the default EFI binary location on your ESP (/boot/EFI/BOOT/BOOTX64.EFI on x64 systems). "
the gummiboot part fails. gummiboot gives this error at install saying file system is not FAT EFI, so first I got gummiboot and gummiboot-efi both using pacman. then, I provided the --path to install and now it coughs up because the latest iso isn't 3.8 yet.
Failed to access EFI variables. Is the "efivarfs" filesystem mounted?
I can see efivars but this is asking for efivarfs.
so instead I did,
# cp /usr/lib/gummiboot/gummibootx64.efi /boot/efi/EFI/gummiboot/gummiboot.efi
# efibootmgr -c -d /dev/sda -p 1 -w -L "Gummiboot" -l '\EFI\gummiboot\gummiboot.efi'
how do I set this up? I'm afraid if I overwrite /boot/efi/EFI/BOOT/BOOTX64.EFI windows might not boot.
after the installation (of course without gummiboot stuff) now when I reboot, I don't see any gummiboot menu at all because i didn't copy it to EFI/BOOT. it goes straight to windows 8 boot. during boot if I press F12 and see the menu option on thinkpad, I see gummiboot as the first entry(must be because of efibootmgr) followed by windows boot manager. When I select the gummiboot and enter, it just circles back to the same menu. I have setup the loader.conf and arch.conf as described in the wiki.
how do I set gummiboot to work? i dont mind pressing F12 and then going to gumiboot-> arch until 3.8 is out.
If this isn't possible, can I install rEFInd without messing gummiboot? looking at the dir structure of FAT EFI I think it should be possible but not 100% sure until i try it out. Also, to get rid of gummiboot, i should delete the directories, uninstall using pacman and get rid of the efibootmgr change I made, right?
Last edited by lobo2 (2013-03-15 04:07:47)srs5694 wrote:
sidneyk wrote:Maybe not, I use rEFInd and mount ESP on /boot/efi and copy over updated kernels and initramfs. Maybe if you are mounting ESP at /boot the kernel and initramfs get written to both places at once, I don't know. I also don't know if /boot is where gummiboot expects them to be.
I realize this has been at least partially addressed by others, but I want to make two points very explicit:
In Linux, partitions (or more precisely, the filesystems that most of them contain) are accessed by mounting them at a mount point (a directory). Thus, when you mount the ESP at /boot, the contents of /boot are the ESP. Put another way, mounting the ESP at /boot means that to read or write the ESP, you read or write files and directories under /boot. You can test this yourself by mounting and unmounting a partition that's not basic to the minute-to-minute functioning of the computer. The ESP will actually work fine for this. Unmount it from /boot or /boot/efi and then issue a mount command to mount it elsewhere (say, "mount /dev/sda1 /mnt"). Then check the files under your temporary mount point, and even copy a file there. You can then unmount it and mount it back where you normally do and look for the file you copied -- it should be there. Play with this until you fully grok it.
Gummiboot runs before Linux, and it has no conception of Linux mount points. Thus, whether you mount the ESP at /boot, at /boot/efi, at /home/fred/abadmountpointforanesp is irrelevant, so long as the files on the ESP are laid out in the way that gummiboot expects. The trickiest aspect of this for those unfamiliar with the Linux mount system is that you do not include the Linux mount point in filename references for pre-boot programs like gummiboot. That is, if you mount the ESP at /boot and place the kernel at /boot/vmlinuz, then in gummiboot, the kernel would be \vmlinuz.
Yeah, I figured this out based on the OP's response to that and thinking it through, I just never really thought about it much before now. But I will argue that the mount point /boot and the EFI partition are indeed 2 different locations. I know that once the ESP is mounted at /boot that this distinction disappears until it is umounted and something written to /boot, but while mounted as such, /boot and ESP are virtually the same, at least to the Linux system. I realize the EFI programs are ran before any OS and therefore don't really care about any OS specifics.
I wonder if the OP has confused the info between gummiboot and rEFInd (possibly from the Beginners Guide) because to me, after reading the gummiboot wiki, it just seems that it would be much simpler to just give gummiboot what it wants, i.e. ESP mounted at /boot, whether it's a separate partion or not. I'll have to take a look again at the Beginners Guide to see again the order of things there, but if it isn't, maybe it should be having the user ensure that pacman has completely updated the new system and then go on to the boot loader specifics. I was just thinking though, that the way the install medium is now, that it was automatically pulling the latest stuff down as part of the install process. I know it's not pulling testing or multilib without user intervention, but the core, stable stuff it is. That seems to be part of the confusion here maybe, 2 different versions of gummiboot with gummiboot changing some things between the 2 and maybe the kernels, too.
[EDIT] I took another look at the Beginner's Guide and it says that most users will probably want to use the [core], [extra], and [community] repos, which are enabled by default. It goes on to recommend that [multilib] be enabled for users wanting to run 32 bit programs and then reminds you to run #pacman -Sy to update the package lists, but not #pacman -Syu which would apply any changes from the repos since starting the install. Shouldn't matter much, even if the [multilib] repo was enabled because at that point no 32 bit libs have been installed, but it would matter if a user decided to enable the testing repos.
I wouldn't ordinarily recommend it, but in this case, if the OP is comfortable with the risk, then it might be useful to, at least temporarily, enable the [testing] repo and do #pacman -Syu to pull in the 3.8 kernel. Note that this is likely to also pull in other packages from [testing], but if you haven't installed X yet or any desktop environment, then what is pulled in shouldn't be too overwhelming. He can then immediately go back and disable [testing] if desired. I'm currently using testing without any issues, but there are risks to doing so.
Last edited by sidneyk (2013-03-14 18:13:43) -
Hope you all are doing good.
I have a business issue to be implemented in ODI 11G. Here it is. I am trying to load a target table from two sources having same coulmn names. But one source is in file format and other is in Oracle Database.
This is what i think i will create two mappings in the same interface using Union between the sources. But i am not sure how the interface would connect to different logical architecture to connect to two different sources.
Thanks,
SMYou are on the right track, this can all be done in a single interface. Do the following
1) Pull your file data model into the source designer and and your target table model to the target pane.
2) Map all the relevant columns
3) In the source designer create a new dataset and choose the UNION join type (this will create a separate tab in the source designer pane)
4) Select the new dataset tab in the source designer pane and pull your source oracle table data model into the source designer. Map all the relevant columns to the target
5) Make sure that your staging location is defined on a relational technology i.e. in this case the target would be an ideal candidate as that is where ODI will stage the data from both file and oracle source and perform the UNION before loading to the target
If you want to look at some pretty screenshots showing the steps above take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/ -
I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else. I tried turning off using both buttons...nothing. Any suggestions?
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Above from:
http://support.apple.com/kb/TS3694#error1611
Note it could be a hardware problem -
i tried to reinstall the smc from the list apple provides, http://support.apple.com/kb/HT1237 but the install says i dont need too wont even let me reinstall, yet the console has many smc errors,
i know my hardware is fine
ive tried removin any software that might affect the smc but this doesnt resolve the problem. and there are still smc errors in the console
PS dont want to go to apple store as its far away and im poor and dont want to get charged the earth for repairs or wipe my mac,it seems to happen more when idle also if thats any help
-
string wire = " Persist Security Info=False; server=xain; port=3307; database=test;username=root;password=";
string query = "insert into test.server_base values('" + textBox1.Text + "', '" + textBox2.Text + "')";
MySqlConnection condatabase = new MySqlConnection(wire);
MySqlCommand cmd = new MySqlCommand(query, condatabase);
MySqlDataReader myreader;
try
condatabase.Open();
myreader = cmd.ExecuteReader();
MessageBox.Show("Good");
condatabase.Close();
catch (Exception xe)
MessageBox.Show(xe.Message,"na g na");
/*server=xain is a server name assing in which database is install */Hi sohail.
As you title mentioned wamp server, for WampServer is a Windows web development environment. It allows you to create web applications with Apache2, PHP and a MySQL database. This is third-party software. I
am afraid this is out of our support. I would suggest you to ask in their
official forum. Thanks for your understanding.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
When i open a website, i get two tabs with the same address but different icons?
when i open a webiste, i use google, another tab for the same website appears but with a different logo. macafee says it's not a virus, and to contact firefox.
i am not a computer person and i don't know how to get rid of the second tab
appreciate any help! :-)Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
This problem seems to affect all CDs. I've tried selecting and deselecting the 'error correction' box on the import settings but this makes no difference. I'm running W7 Home Premium with SP1. iTunes Version is: 11.1.3.8 Diagnostics confirms all CD/DVD Drive tests are successful.
As I say, iTunes will play the CD without ny problem. Has anyone experienced this and what's the fix?Thank you so much! I was in the same situation (iTunes library stored on external hard disk). Strangely, iTunes knew where my music was stored (i.e. if I clicked a song it would link to the library location and play with no problems). But in the "Advanced" settings, the location of my iTunes Library was blank. So I just pointed to the correct location and now everything is working OK! Thanks again.
Maybe you are looking for
-
Safari 3.0 beta unexpected crashes
i seem to have this problem that when i open the new downloaded Safari 3 beta, it just crashes while it is launching. I tried uninstalling it and installing it again but it is the same - crashes before i even see the window. please someone help me ou
-
How do I sync iPad and iPhone on iCloud?
How do I sync iPad and iPhone on iCloud?
-
IPod touch 4g is not recognized in my computer as a portable device, help?
I have an iPod Touch 4th generation (4.2.1) and the computer it was initially synced with (a Dell Inspiron laptop) is no longer working. I would like to update the iPod software via iTunes, and I have already transferred purchases and backed up my i
-
'FROM keyword not found where expected'error while Inserting into Text file
Hi, I have created a simple interface for testing purpose. All it has to do is to Read the data from a Source Text file and put it into another text file (exactly the same headers as that of source) ... I am using Oracle as my staging area. But at 'I
-
I am trying to configure a scored simulation so that if the learner performance an incorrect action, they do not receive credit for the point(s) assigned to the associated interaction. I am working with click boxes and the issue I'm having is that if