We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 vid

We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 video servers. We have tried multiple scenarios and cannot get the captions to display.
Whenever I export, it becomes a 608 stream, and will not play on their servers.

Hello there,
I'm sorry to hear you are having a problem. Thank you for taking the time to post here.
Here are some questions:
1. What version of PPRO are you using? MAC or WIN?
2. Is the caption data you are embedding a 708 caption stream?
3. When you re-import the MXF with captioning embedded back into PPRO, does it show 708 closed captions in PPRO?
PPRO will embed 708 caption streams to MXF -- I just did this, re-imported the embedded MXF to PPRO, and I see the captions in the MXF.
If you could share one of your files with me, I could take a look.
Take care and thanks again,
CM

Similar Messages

Subtitle workflow. Is it possible to import srt files into premiere and then export to Encore?

Hi, I'm editing a series of short documentaries that wil be published in DVD with subtitles, and I'm wondering if there's any way to import srt files into Premiere and then export the project to Encore.

You can easily (and better, IMHO) do what you want in Adobe Prelude. It's part of the CC subscription, and may have been included with CS6.
Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips. Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting. Don't select the Transcode option.
Cheers,
Jeff

BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next?

BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition

Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others.

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!

Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update.

Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
Is there an easier way to do this, bypassing iDVD?
Some DVD players will play a disc containing jpeg images

If I delete my songs from my "Downloads" folder, have them in my "Trash" and then delete them from my "Trash", will I still be able to play the songs on my iTunes or will they be deleted on my iTunes as well?

I want to clear some space on my Mac since it is filling up and I don't have much room left on it. I want to delete all my songs from my "Downloads" folder and then delete them from my "Trash" to free up space however, I'm worried that if I do this then iTunes will not play any of the songs I deleted.
Will I still be able to play my songs on iTunes even if they are not in my "Downloads" or "Trash" folders?
Thank you.

All tracks in iTunes (if you use default settings) should be in various artist and album folders in the main media folder in the iTunes folder. You can right click a track to reveal its location in Finder. If there's a copy there then it doesn't really matter what you do with other copies.
I have never downloaded from iTunes but I thought it placed files directly in the correct locations, or is this some other downloads folder to which you are referring?
Normally if you download a file from another source and add it to iTunes by dragging it there, or using the Add To menu item, it places a copy of the file in iTunes. You can discard the original, but if you're concerned you can check which copy iTunes is actually using as above.

Do i get a worldwide warranty for macbook pro ? As i live in india and order my mac from canada , will i be providede with the warranty services in india as well ?

I want to order my macbook pro from canada and will take it to India . but i was wondering if the warrranty would be worldwide ?
and any extra charge for transportation will be applicable ot not ?
Also if any other issues are likely to come if i do so . Please help me with them ..
Thanks
saurabh

The MBP has a worldwide warranty.

Can I scan line art (B&W drawings) into Elements and then fill them with color?

In Photoshop CS I could do this. Can this be done with Elements? All I see under "IMPORT" is importing from a camera. Can I import something I have scanned as well?

I see you’re in Tiger and I’m running Leopard. If I remember correctly, in Tiger it’s something like Print > PDF > Quartz Filter > Gray Tone. In Leopard, it”s
Print > PDF > Open PDF in Preview > Save As > Quartz Filter > Gray Tone.
If Quartz Filter doesn’t directly follow PDF there may be a menu that says Filter and then Quartz Filter. My memory, to quote Henric, is “porous.”
Walt

Are there any known issues with the epub plugin causing firefox to revert search engine back to yahoo and then disabling the ability to change search settings?

My wife recently added a plugin, epub reader. Upon starting up Firefox the next day she noticed that the default search engine was changed back to Yahoo after we previously fixed this. Furthermore the ability to change search settings was grayed out. After epub reader was removed the problem was solved. I am surprised that I am unable to find anything written to this end about epub reader. Is this a tool promoted and distributed by Yahoo?
Incidentally, how much would each user need to contribute to get mozilla away from Yahoo? Yahoo is, in my opinion, little more than an advertising vehicle, and not a real search engine.

I went to Costco today and asked long known VZW Kiosk rep re what phone would he recommend...DX, DI or Fascinate.
Not to my surprise, I was told that DX is the best of those three. Given the fact that all three is the same price $199, it indicates that is has nothing to do with price.
When I acquired him about how Fascinate sales going, rep told me that since that phone went for sale this Thursday, local Costco only sold 10 Fascinate but that not all...7 of them were returned back to Costco by Saturday. That is a 70% return rate which seems to be way too high for the high level smartphone.
At the same time, local Costo VZW kiosk can't keep up with demand of the DX, they are being sold out as soon as they are getting them. I am not advertising for DX here as I am myself briefly owned DX as soon as it was released and its problem with reboot forced me to return it as I didn't want to deal with replacement as I had bad experience in the past two years with VZW replacing my phones every two to three month with replacement phone being worse then the one that is being replaced.
There is no such a thing as a perfect smartphone (sorry to all iPhone fans) but VZW should take a special "achievement" award for screwing up such a wonderful phone as Galaxy S.
I can only hope that either DX with 2.2 will be better than the one with 2.1 or I will wait for what is coming up with HTC in November.

My mom was able to call verizon and then was able to stop my phone from working with the network. The phone itself works but it cannot send messages or use the data. How can i "turn it back on"?

She called some number and stopped it from using the network. How can i make it work again?

>Posted edited to remove instructions that could lead to a fraudulent act< But if she's paying the bills, she's going to see that you turned it back on and I'm guessing you're probably going to get into even bigger trouble (especially if you managed to impersonate her or speak on her behalf). Best bet, talk to your mom about what she wants from you in order to get it turned back on.
Good luck!
Message was edited by: Verizon Moderator

What is the best workflow procedure for importing DV SP 16x9 footage into FCP7 and then exporting the best quality 16x9 to standard DVD so that it looks great (or at least good) on a 50" Samsung LCD TV ?????? Please help! anybody?? Thanks!

We are using a Sony HDV-Z7U camera for acquisition. We recently recorded an event using the camera's non HD capabilities. We set the camera to record "DV SP" 16x9 settings on both Mini-DV tape and CF card.
To import the DV SP footage into FCP7 we chose the "DV NTSC anamorphic" setting in the log and transfer settings window. After a successful transfer from the CF card (the CF card held approximately 83 minutes) we checked the size of the file and found it to be 16 Gigs! Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
We need to burn DVDs of this show - we sent it to compressor and got horrible quality.
What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def. footage and what is the best method for exporting for outputting this footage to DVD that preserves the original quality of the DV SP footage?? Anyone? Many thanks

> Why so big? An 83 miniDV tape shot in SD should easily fit on a standard 4.7 gig MPEG2 DVD.
No it doesn't. DV is 13GB per hour.
In any case, a Video DVD uses the MPEG 2 codec, not DV.
>What is the best setting to use in FCP7's log and transfer settings window to import DV SP 16x9 standard def.
DV NTSC anamorphic.
>what is the best method for exporting for outputting this footage to DVD...
Use the Compressor DVD preset "Best Quality 90 mins".
>...that preserves the original quality of the DV SP footage?
Not going to happen, you are compressing by a factor of 1:4. Shooting as HDV would have given you better quality material to start with. DV is at the bottom end of the scale.

I can't get the intial sync done. It says it cannot find many songs and then stops. Horrible first Apple experience! Help please.

My first taste of this Apple is horrible! I cannot do the inital sync successfully. Its gets to the 4th stage of syncing where it is copying songs and tells me there are over 100 songs it cannot find. Why not? They show up in my Itunes media file so why can they not be found? Then the syncing ends with a message "Attempting to copy to the disc "Doug's Ipod" failed. An error occurred while reading from the device"
This is very frustrating.
Thank you for your help.

Hi Bblairjones,
If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
Apple Support: iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Regards,
- Brenden

HT1351 I have been regularly receiving video tutorials from Addicted 2 Salsa and synching these to my iPod but recently I have been unable to do so. I overcame this problem in the past by making an ipod version or loading them on to iMovie and then sharin

I have been regularly receiving video tutorials from Addicted 2 Salsa and synching these to my iPod but recently I have been unable to do so. I overcame this problem in the past by making an ipod version or loading them on to iMovie and then sharing them but this method no longer works. THere is no problem viewing them on my computer and everything else synchs okay to the iPod so what is going on and how can I overcome this problem?

Double check to make sure podcasts are configured to sync to your device from under the iPod's Podcast configuration tab.
To access the Podcasts tab for your iPod, plug your iPod in and click on it from under theDevices section in the left hand pane of iTunes. This will bring you to the Summary tab. Along the top you should see a Podcasts tab, so go ahead and click on it. Here you can configure how and what podcasts sync to your iPod.
If you do make any changes to do this tab, make sure to hit the Apply button in the lower right hand corner to apply the update changes to your device.
Otherwise, are you getting any error messages when you sync your iPod Classic with iTunes?
B-rock

All the apps on my MacBook Pro have been transferred to the Trash. Any idea how I might get them back into my iTunes?

I recently noticed that all the apps stored on my MacBook Pro are now in the Trash. This is the computer from which I synch all my devices. I'm not sure what I did to make that happen, but I'd like to transfer them back into my iTunes. I have tried to drag and drop them back into iTunes, and I have tried to right-click them to see if there is a good option. Any ideas?

If the applications have got a IPA extension, they are apps for the iPhone, iPad and iPod touch. First of all, open iTunes and go to Applications to check that your applications are still there, because iTunes removes the old app version when it is updated, so you may have an old version in Trash. In this case, you can empty it.
If not, open a Finder window, select the Go menu (in the menu bar) -> Go to Folder, and type:
~/Music/iTunes/iTunes Media/Mobile Applications
When you are in the folder, open the Trash and move your apps to this folder.

We use a doc template to create a purchased part spec document and then save them as pdf formatted files. These part spec documents are also appended with the datasheets for these purchased parts. When we want to update/revise the document, is there a m

We use a doc template to create a purchased part spec document and then save them as pdf formatted files. These part spec documents are also appended with the datasheets for these purchased parts. When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
Also, our resulting pdf documents aren't searchable. How can we generate pdf documents that are searchable? I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
Can you assist?

Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

We are trying to close caption our telecasts. We get the captioning files done out of house, pull them back into Premiere, and then embed them. The TV station requires .mxf files with the file embedded as a 708 stream, to play on their Grass Valley K2 vid

Similar Messages

Maybe you are looking for