We are unable to complete your activation at this time
Greetings,
Today @ around 4:30PM PST on 4/20/11, right after doing the update to my iPhone4 to 4.3.2, from within iTunes I'm getting the following error, "We are unable to complete your activation at this time."
Is anyone else experiencing similar issues today? wondering if perhaps the activation server is down or something of the sorts.
Thanks.
Dario G wrote:
Just called customer support for iPhone's, the technician confirmed theactivation servers are down for maintenance, Seems odd since 4:00PM on aWednesday seems like a HORRIBLE time to do server maintenance.
It's more likely that the maintenance is to fix whatever problem caused the servers to crash
Similar Messages
-
Whe i conected my iPad 1 it says update and when i update to iOS 5.1.1 i cant activate because the iTunes says this
We are unable to complete your activation at this time. Please disconnect your iPad from your computer and reconnect it later and we should be able to activate it. We apologize for the inconvenience this causes. with iPAd 1 iOS 5.1.1
What can i do Apple?This is usually a symptom that the phone was hacked/jailbroken. Was it?
-
After downlaoding ios5 and installing I get the message "we are unable to complete your activation at this time" when trying to update iphone 3gs to ios5 using itunes. Can anyone help?
Hi David,
any luck later?
I'm experiencing the same issue and I see that you're also posting from China. Not sure is location-related but if you managed to activate you iPhone: how did you do it? Just keep on trying?
I'm a bit fed up of trying. It's already two full days...
Thanks, ciao.
Stefano, Shanghai -
Trying to send my iPhone 5 in for repair, keep getting this error:
"We're sorry, but we are unable to complete your request at this time.
Please try again in a few minutes or start over now.
(system.99)"
Tried using different browsers, and waiting few minutes, no joy : (
Any Ideas?Yeah, it kept doing it when I was trying to change the delivery address, changed it on my apple main apple profile adress and then it worked on the repair page.
-
We are unable to continue your activation at this time
my iphone is not working please urgently activation
dinesh jainI have the same issue... no SIM installed (using it solely for docked music etc over WiFi). Reset the phone, updated to ios6 and can't activate
-
How can i remove old device's from My Support Profile.
When i try to remove a device, then i see this.
We're sorry............................
It is not possible te remove.
Any one with a fix for this.
Thanks.Yeah, it kept doing it when I was trying to change the delivery address, changed it on my apple main apple profile adress and then it worked on the repair page.
-
We are unable to process your request at this time.......
After logging in , i get the following message when trying to access anything other than email via "My Verizon"
"We are unable to process your request at this time.
Please try again later. We apologize for any inconvenience."
the strange thing is my last login shows September 11, 2014, even though i have logged in today and previous days after this date.Your login procedure sounds different from mine.
Try this link:
https://www.verizon.com/foryourhome/myaccount/ngen/upr/nlogin.aspx
If you put your userid in the box provided, then select My Services on the pull down, then click on Sign In, and then enter your password to continue, does the problem still occur? -
My iphone 4s is saying we are unable to complete your activation....HELP!1
i have been trying since 2 oclock it is now quater to 8......it just wont work
PLEASE PLEASE PLEASE I BEG YOU ALL.....has anyone found a solution yet???
First I had the ''sim card failure'', which I managed to solve with one link on one of the forums (a pain in the *ss that I almost cried) AND NOW, AS IN TODAY, the message ''activation required'' appeared, and to make long story short: my iphone is a brick.....completely useless.....the only thing on my screen is this message: This device is not registered as part of the iPhone Developer Program.
''We're unable to complete you...''
Is my iPhone DEAD???.....I saved a lot of money to buy this device, PLEASE HELP ! ! ! !
(Im about to cry, again) -
I am tryhing to activate my new Ipad and am haveing no luck. I am hardwried tomy computer, have insured that I have the latest version of ITunes but when I turn the unit on, I can get through the language and the country selection, select "connect to ITunes" , after a minute or two, get an error message "Unable tocontunue with your activation at this time" I have been screwing around with this for several hours now and am beginning to think I have a $650 piece of junk
Hmm, well... iTunes trys to activate your iPod using the Apple server to make sure you have bought it legit.
Two things come into my mind:
1) Your iTunes can't access the internet.
2) Apples activation servers are down.
That's just my cents, maybe anyone else has an idea. -
when i try to activate itunes on my iphone it continues to say "We're sorry, we are unable to continue with your activation at this time." and now my phone has stuck. what happened?
Hello mzpartia,
I found an article from Apple that specifically outlines how to try and troubleshoot this issue. It's called iPhone: Troubleshooting activation issues found here: http://support.apple.com/kb/ts3424.
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
Take care,
Sterling -
Attempting to restore Iphone 3 to factory deafalut, to finish "unlocking" the Iphone 5.
Moving the phone from one cellular carrier to another (in this case Rogers to Bell in Canada).
Rogers "unlocked" the phone on their end for $50.00, sent an email to Apple requesting serial # to be released from their network, and to provide "unlocked" status.
Next step was to restore phone to "factory default" in I tunes, and wait for phone to reset and show "unlocked" status.
Upon phone resetting in Itunes, after the "factory default", received the following error message"
"we are sorry, we are unable to unable to continue with activation at this time Please try again, or contact customer service".
I contacted Apple customer service whom confirmed that the phone is showing as "unlocked" in their system.
New carrier that I am attempting to hook phone up states that the phone is still locked.
What is the solution or workaround?Hello mzpartia,
I found an article from Apple that specifically outlines how to try and troubleshoot this issue. It's called iPhone: Troubleshooting activation issues found here: http://support.apple.com/kb/ts3424.
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
Take care,
Sterling -
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
when i connect my iphone 3Gs to itunes in my computer they say, they have an update for my iphone ios 5 to ios 6.1, this is the message that apear in my itunes, We're sorry, we are unable to continue with your activation at this time.Ask your question. what should i do for now for iphone didnt activate of itunes?
Ask the person who owns the iPhone.
Which version of Cydia appears on the iPhone - the one
with the black and white icon or a different one?
If it was jailbroken, contact the developers of the jailbreak.
Not all jailbreaks can be completely removed.
Google may provide some direction. -
Mi iphone is not we're unable to complete your activation ios 5.1
we're unable to complete your activation ios 5.1
Can you specify where exactly in the activation process you are getting stuck? For example: with a new phone after connecting to a network.
I assume you are using the iPhone 4 for development? Since the current latest version shipped is the 5.0.1. Version 5.1 is still in a Beta 3 phase. -
We're sorry, we are unable to continue with your activation at this time, We're sorry, we are unable to continue with your activation at this time
i cant complete the restor my phone, becouse this message alway in wel come scree. what i do for that... please help about thatWas your phone ever locked to a different phone carrier than the on your currently on now?
If it was how did you get your phone unlocked?
Maybe you are looking for
-
Changing Portal Theme for HTMLB elements
Hi I want to change css of the portal theme and use different styles. I downloaded the portal theme used and found css files in "its" folder. Is it useful to change the css files in it or how can i change style of theme?
-
Hi all, I want the good explanation about the MM Claasification view. I am new to the sap. I have to update the classification view. But In bapi_material_savedata, there is no provision for that. First i need to understand the classification and tabl
-
VA01 user-exit to modify net price of line item...
Hello Experts, Is there a user-exit to modify the net price value of a line item upon 'ENTERING' in VA01 transaction? Hope you can help me guys. Thank you and take care!
-
Can't update ADOBE after many attempts. Why won't it work?
Keep getting messages saying I must update ADOBE. Keep following directions for update. Then I'm disallowed access to anything that requires ADOBE update and a red typed message appears again saying I need to update ADOBE. Why won't this work ? I am
-
I didn't realise there was such a wide range of RAW files