We are unable to discover

Hi there,
We run CiscoWorks LMS3.2, and recently upgraded our old routers 2600 series to 2900 ( 2921 ). However for some reason CiscoWorks does not seem to recognize these new devices. We have tried removing a device and rediscover it but we are still having the issue. Are there any patches or is there anything we can do to fix the problem ??
Any assistance will be greatly appreciated ..
Regards,
Vlad

Vlado, what do you mean by "not recognising" the device? In which part of CiscoWork (CiscoView, RME, Campus Manager, DFM, Common Services) device has issue?
Also, please run snmpwalk with oid=.1.3.6.1.2.1.1 against the problematic devices and post the results.

Similar Messages

Unable to discover Why No Join Predicate

Please help me, I have this query:
select pc.Val,
PC2.Valstring as valstring,
pc.ValString as MessageType,
pc2.Val as Port
from dbo.tblproperty p with(nolock)
inner join dbo.tblpropertycfg pc with(nolock) ON p.pkPropertyID = pc.fkPropertyID
inner join dbo.tblpropertycfg pc2 with(nolock) ON p.pkPropertyID = pc2.fkPropertyID
where p.pkPropertyID = 5
and pc.Concept = 'PBX'
and pc2.Concept = 'PBXIP'
I am attaching the Excution Plan, this plan showing "No Join Predicate" Warning, I am unable to discover where is the problem, please help.

Hi SathyanarrayananS:
Thank you for your support, when you say "are there any chance they are UDF or View" you mean if I could create and UDF or View with those tables?, because both tables are physical.
I am already readed the link and IMHO my query does not meets on any of examples provided.
As you can see, the first joins using the table, does not cause NJP, but when we apply the third join is when the NJP arise.
Do you need additional information about my schema?
Best regards.

Unable to discover local disks in T5220

According to http://docs.oracle.com/cd/E35328_01/E35332/html/vmusg-storage-types.html#vmusg-storage-local
I should be able to use extra disks in a T5220 to store VMs:
Local storage consists of hard disks installed locally in your Oracle VM Server. In a default installation, Oracle VM Server will only use the first disk (/dev/sda), leaving other disks available for storage.
As long as no partition and data are present the device will be detected as a raw disk. The choice is yours to use the local disks either to provision logical storage volumes as disks for virtual machines or to install a storage repository. If you place a storage repository on the local disk, an OCFS2 file system is installed.
But I am unable to discover these disks using Oracle VM Manager 3.2.2.520, managing a host running Solaris 11.1 with latest version of VM Server for SPARC:
# pkg list | grep ldom
consolidation/ldoms/ldoms-incorporation     0.5.11-0.175.1.9.0.4.0   i--
system/ldoms    0.5.11-0.175.1.9.0.2.2    i--
system/ldoms/ldomsmanager    3.0.0.4-0.175.1.9.0.4.0    i--
I suspect that it is because "partition and data are present" on the disk, but I don't know how to delete partitions with the format command, only change them to unassigned and zero length, and that didn't work:
partition> p
Current partition table (original):
Total disk cylinders available: 46873 + 2 (reserved cylinders)
Part      Tag    Flag     Cylinders         Size            Blocks
0 unassigned    wm       0                0         (0/0/0)             0
1 unassigned    wm       0                0         (0/0/0)             0
2     backup    wu       0 - 46872      279.38GB    (46873/0/0) 585912500
3 unassigned    wm       0                0         (0/0/0)             0
4 unassigned    wm       0                0         (0/0/0)             0
5 unassigned    wm       0                0         (0/0/0)             0
6 unassigned    wm       0                0         (0/0/0)             0
7 unassigned    wm       0                0         (0/0/0)             0
I can't make slice 2 size zero, otherwise when I run label to write the changes I get an error. Can anyone tell me what I'm missing? Thanks!

The reason you can't do this, is that the currently shipping support for Oracle VM Manager on SPARC systems is only for NFS. The paragraph you are quoting is from the base Oracle VM manual and that section applies to x86. /dev/sda is a Linux convention, not Solaris, so it wouldn't apply here.
If you go to the Oracle VM Server for SPARC documentation at Oracle VM for SPARC Documentation and then select View Library for Release 3.0 at
http://docs.oracle.com/cd/E37707_01/index.html
you will see a page with all the documents for the current release. Pick the "Oracle VM Manager 3.2: Quick Start Guide for Managing Oracle VM Server for SPARC" at http://www.oracle.com/technetwork/server-storage/vm/ovm3-sparc-quick-start-guide-1900072.pdf
You are running the correct version of Solaris 11 and the logical domains manager, so you should be able to discover the server, networks, and file-based repositories, but you'll have to wait till a later release provides support for local disk, FC SAN, and iSCSI. I hope this helps explain the situation.
Jeff

Bluetooth Unable to Discover/Pair Up

Why is my iPad unable to discover/pair up with other Bluetooth accessories???

What accessories are you talking about? The iPad only pairs some bluetooth devices like most keyboards and headphones. It does not pair with headsets.

To be unable to discover a Nexus 5548 wirth DCNM 5.2(2e)

Hello,
I am unable to discover 2 Nexus 5548 with the SAN client of DCNM 5.2(2e)
These Nexus are used like LAN and SAN switch. Each Nexus is a SAN fabric. I would want to use DCNM in order to configurate the zone/zoneset via GUI. These Nexus 5548 run 5.1(3)N2(1b) release.
The Nexus ARE NOT managed via the Mgmt interface (OOB) but they are managed via an interface vlan (InB)
I could not configure rightly
- the snmp-server user (SNMP user V1/v2 or V3 + group ? ) CLI on Nx
- to configure the discovery in order that DCNM discover each fabric either from web GU interface or java SAN client
Please help !

I believe DCNM requires an ssh login to the Nexus and not SNMP.
DCNM uses Netconf over SSH protocol. See this earlier posting.

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

I am unable to complete Synching with my IPhone 4S as it tells me reason is that Apps are unable to be determined on my phone however all of them Purchased from I Tunes. Can someone assist me with a Solution

You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

You are unable to log in to the user account at this time

I am facing this problem for some time now. Can anyone give some hints?
By the way. Excuse me for my English. I am not a native speaker.
I have a MacMini with Snow Leopard Server (10.6.7 since yesterday) wired to two iMacs (10.6.7), two PC's running Windows and a Time Capsule/Airport (7.5.2) which is wirelessly connected to a MacBook Air (10.6.7), iPad and iPhone.
The PC's use file sharing (SMB) which works fine.
The Server has some network accounts. Home dir is on the server.
At one iMac, I can log in to a network account. E-mail, iCal on Server, sync with iPad and iPhone. Works fine.
At the second iMac, I can NOT log in to any network account. Window shakes, saying "You are unable to log in to the user account at this time" and "Logging in to the account failed because an error occurred". In Terminal window, I can reach /Network/Servers/do.main.name/Users. Using the Finder, I can access all my files. If I shut down the first iMac, I can log in.
At my MacBook, I can not log in to my network account. In Terminal window, I can Not reach /Network/Servers/do.main.name/Users. I get "Users: Host is down". But using Finder, I have access to all my files. Shutting down both iMacs doesn't help. Airport settings see to be correct.
Where do I have to look. On the Server side? Using Server Admin and Workgroup Manager (from any client) I can not see anything strange. In WGM, multiple login for the network accounts is enabled. I even have Guest Access enabled for AFP (both in the sharepoint and in AFP settings).
Anyone?
Gr. Barend

Solved.
see: http://discussions.apple.com/thread.jspa?messageID=13288063&#13288063
Gr. Barend

Few users are unable to sign in after we added 2 more front end servers in existing pool?

Hello,
We have recently extended the Lync 2010 Enterprise pool with 2 Front end servers. Now we have totally 6 Front end servers.
After this change some users are unable to login. Error message: "Cannot loggin as server is temporarily unavailable"
Captured, client logs and received the following:
ms-diagnostics: 4004;reason="Credentials provided are not authorized to act as specified from URI";
We have the following security settings on the newly added front end servers:
Network security: Minimumsecurity for NTLM SSP Based clients - set to - Require 128-bit encryption
In other existing front end servers, it has been set to - No minimum.
Questions:
1. Is that the issue for signin failure?
2. Do we need to change this option to - No minimum in new servers and reboot it?
Please advise. MUCH THANKS.

Hello
Those clients running in Windows 7 OS. And the error is different:
"Cannot loggin as server is temporarily unavailable"
Thanks

E72 unable to discover BH-216 headset?

Greetings!
I have just bought a Nokia E72 to replace my old Nokia 6120c. Now, the 6120c was a great phone, but lacking a full keyboard as well as WLAN and GPS made me go for the E72.
Now, I have a strange problem: The E72 is unable to discover my BH-216 BT headset, that was previously paired to the 6120c, and works perfectly with the old phone.
The E72 however is unable to even detect the BH-216, and I do not know why? I already deleted the pairing on my 6120c, but I don't think this has any effect? Do I need to do anything special to get this to work?
I'm puzzled by this problem...
Thanks!

Dammit.
Next time I should really read the freaking manual...
Obviously, the BH-216 stores its pariring. Switch BH-216 off, then back on (hold on/off button for 6 seconds until green LED starts to flash rapidly) => Device open for discovery and new pairing.
Haha.
My fault.

I recently got an iPhone 4 out of nowhere it has decided to go to connect to iTunes screen/emergency calls only when I plug into iTunes it states we are unable to continue with your activation at this time please try again later, or contact customer care

I have recently got an iPhone 4 out of no where it has decided to think that my headphones are in and they are not but does work with headphones in.
Then later on within the same day it after turning my phone on and putting it on charge it comes to the screen stating to connect to iTunes/emergency calls only/no service so I connect it iTunes and it says we are unavailable to continue with your activation at this time. Please try again later, or contact customer care.
HELP!

the same problem but i used it already for 3 years my iphone 4, when i update to ios 6.1.3 version, now is failure like said.
we are unable to continue with your activation at this time please try again later, or contact customer care
any help please. i am here in saudi arabia city of jeddah.
thank you very much in advance
pabs

When i go to sing into apple id it says "We apologize but we are unable to verify your account information online". When i go to "Not sure if you have an Apple ID?" It says "We apologize but we are unable to verify your account information online"

When i go to sign into apple id it says "We apologize but we are unable to verify your account information online". When i go to "Not sure if you have an Apple ID?" It says "We apologize but we are unable to verify your account information online" When i try to sign in with my email it says "you already have an account????

Might I suggest a password reset?
Maybe you can click on the Reset Password link instead of trying to log in at appleid.apple.com.
I'm not sure if that would work, but its worth a try.
~Lt. Leviathan

Windows Server 2012 R2 RDS: RDS Users are unable to delete files from their desktop

Hello,
We are working with Windows Server 2012 R2 RDS. We also implemented User Profile Disks. This is all working fine without problems. The only issue I have is that normal users are unable to delete files from their desktop. They are getting a message:
you'll need administrator permission to delete this file, with the prompt for administrator access.
They can edit, copy, rename, cut and paste files. But they cannot delete a file from their desktop.
I checked the security permissions of the files on the desktop (for example a normal self-created PDF file) and the users are owner and have "Full Control" over the files.
I checked the file permissions and took a look under "Advanced", selecting the specific domain user and checked the "Advanced Permissions" and the user has the "Delete" option checked. So he should be able to delete the
file.
I am guessing this is UPD related issue, or something in GPO. But I already unlinked the GPO objects, that I felt could be the source of this problem, but without results.
Could someone give me a hint on where to look? It's kinda annoying to users, that they can't delete their own files.

Hello Bria,
What you should check first, is the NTFS permissions on the User Profile Disk to begin with. See if the user has full control over the items that are in the UPD.
Also check the GPO's that are enabled for the user and computer account. You can check that by running: gpresult /h <path>\gpresult.html
There are two GPO settings that could prevent the user from deleting his/her own items:
User
Configuration\\Policies\\Administrative Templates\\Windows Components\\Windows Explorer\
Hide these specified drives in My Computer
Prevent access to specified drives in My
Computer
There might be other GPO settings, that block deleting items on the UPD, but can't think of any out of my head.
I can only think NTFS and GPO settings that might prevent the user from deleting items. In my case it was a GPO setting, that I didn't suspect.

PC Users are unable to check Outlook while my (mac) Mail is open

Ever since I upgraded to 10.4, whenever I have my Mail application open, the PC users are unable to check their IMAP mail through Outlook. The PC Users and myself are all using different accounts, but are checking the same server.
At first, this seemed like it was a coincidence... but then I shut my powerbook and they could check their again. I have to use a web mail client to check my email when I am on the network at work.
Any ideas to resolve this issue? Mail is set to check every 5 minutes.

AA8 and AA9 allow Reader Rights so the user can save the form. This is restricted by the license to 500 uses. In the long run, the only advantage of the Reader Rights is for your users, not for you. You can always import the data into the form and have the same result as they had in the form. It is not necessary to transmit the full form to you, only the data. If you were developing a web form that would likely exceed the 500 uses, you would have to negotiate a price with Adobe for Reader Rights (thousands of $$ should be expected).
If saving is important in a company environment, not online, then you may want to read the EULA carefully as to the exceptions. You will still have to have at least AA8.
I guess the printing problem was answered.

We are unable to discover

Similar Messages

Maybe you are looking for