We can able to add package and patch in Non-Golbel zone?

Hi Sun Gurus,
We have V890 server and it's configered zones.We are facing problem with package and Patch adding in Non-Golbel zone.
I want to confirm whether we can able to add package and patch in Non-Golbel zone?
Thanks in advance
Raja

If their sparse root zones, then you have to install the package and patch in the global zone. The non global zones will all pick them up automatically.
If you need to be able to install packages in only specific zones then you need to make them whole root zones.

Similar Messages

  • My employer wants me to be able to add/delete and otherwise edit her Contacts in iCloud.  Can she grant me access to do that?

    My employer wants me to be able to add/delete and otherwise edit her Contacts in iCloud.  Can she grant me access to do that?

    Yes, but only by giving you her password which would give you access to the entire account.
    Her best bet would be to create a new, separate, iCloud account and place all her contacts on that. Both of you could sign into in in the Control Panel (or System Preferences/Settings on a Mac or iOS) > Mail, Contacts and Calendars so the data would appear alongside the main account. You could have your own separate iCloud account but only access to her contacts and not the rest of her data (and vice versa).

  • Is it possible to patch Global Zone and only specific Non-Global Zones?

    Hi Champs,
    Is it possible to patch Global Zone and only specific Non-Global Zones? Idea is to patch DEV-zones only on the system & test applications and then patch only the STG-zones on same server!
    Not sure if it is possible but just throwing a question...
    Cheers,
    Nitin

    M10vir wrote:
    Yes, if you have branded (non-sparse) zone!Branded zones and sparse zones don't have the relation that you imply. In Solaris 10, native zones can be sparse or whole-root (non-sparse, as you say). Zones that are not native zones are branded zones. Branded zones on Solaris 10 include Solaris Legacy Containers, previously known as Solaris 8 Containers and Solaris 9 Containers. That add-on product allows you to run Solaris 8 and Solaris 9 application environments under a thin layer of virtualization provided by the brands framework. solaris8 and solaris9 branded zones can be patched independently of each other and of the global zone.
    Solaris 11 has no "native zones" - all zones use the brands framework. The "solaris" brand does no emulation and in that respect is very similar to native zones on Solaris 10. Solaris 11 also provides Solaris 10 Zones via the solaris10 brand. This allows zones or the global zone from a Solaris 10 system to be transferred to a Solaris 11 system and run as solaris10 zones. When running on Solaris 11, solaris10 zones can each be patched independently from each other and the Solaris 11 global zone. Technically, Solaris 11 doesn't have patches - it just has newer versions of packages to which the system is updated.

  • HT1368 My wishlist is not working on the app store i can not find the add to wishlish icon but it is working fine with the itunes store so i am able to add films and music but not apps does anyone know how to fix this

    My wishlist is not working in the app store on my ipad it is woking fine in itunes store so i can add films and music but the icon "add to wish list" is not available on the app store so does anyone know how to fix this 

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • Can't see add targets and devices in project explorer

    Hello!
    i think I have a strange query. i have Labview 2010 evaluation version. i am trying to add my cRIO 9004 to a project. I am just trying to follow the instructions in the getting started with cRIO manual. it says, add crio to the project by right clicking root project and selecting NEW>>ADD TARGETS AND DEVICES. The problem is I see the link for NEW but once i click that i dont see a sub-link "add new target or device" appear, INSTEAD i see the dialog box for  opening a NEW LABVIEW FILE appear. every where in the forum/knowledgebase/support trouble shooting and getting started articles have mentioned right-click root project>>select NEW>> select add target or device>> , as if it IS SUPPOSED TO APPEAR STANDARD in all new projects! But I dont see it! i dont get what I am missing. The software version i have are below:
    on cRio:
    NI VISA 5.0
    NI RIO 3.0
    LV RT 8.6
    and it matches with what i have installed on my host computer.
    I can communicate with the cRIO device both using MAX and also using ping command in windows command prompt.
    Any help would be great!!
    Thanks!
    Rajesh
    Solved!
    Go to Solution.

    well yes! it didnt strike me though that i had to reinstall my LV addon modules as you had mentioned drivers. anyways thank you!

  • Can I edit/add graphics and effects to Live footage?

    Ok-
    I know most people use FCP to edit, previously captured footage.
    But what I'm interested in knowing is something along the lines of:
    How does ESPN put graphics on their live footage of a NFL game which is then broadcasted via TV.
    Or
    How does the News put graphics over it's live footage?
    I know this is a broad topic but can FCP do anything like this?
    I have an opportunity to work with a smal scale local video production company that is broadcasting live video footage via the internet but they want to be able to incorporate graphics and some effects into the video.
    They already have the production in place and going (camera crew, director monitoring all cameras and footage, equipment, and server) It works really well, But they've never been able to incorporate graphics.
    How is this done? Anyone here know? Thanks.

    How does ESPN put graphics on their live footage of a NFL game which is then broadcasted via TV.
    Or
    How does the News put graphics over it's live footage?
    With what are called SWITCHERS...or...some other technological term that I know Zebulun knows what it is called. Since he works in live sports broadcasting. Stuff designed for live TV. Used to be called a Chyron or CG (character Generator)...
    I know this is a broad topic but can FCP do anything like this?
    Nope...it is a NON-LINEAR editor...NOT a live switcher. Not at all what it is designed for.
    Google man...
    http://www.masternewmedia.org/videointernettv/live-video/broadcast-live-tv-online-with-mogulus-20070521.htm
    Shane

  • Can I upgrade patches to non-global zones separate from a global zone?

    Normally, one would assume that you want to keep global and non-global zones in sync. However, at the software company I work for we could potentially want to test on different patch levels of Solaris10 simultaneously. I can't bring down the global zone and change it's patch set everytime I would need this. My only option would be to have separate hardware and separate global zone for each patch set which kinda defeats the purpose IMHO.
    Anybody out there know if this is possible?

    Whole root zones allow you to have different levels of an application installed in different zones.
    But they don't really provide a good mechanism for testing different patch levels of solaris itself.
    Since theres really only one copy of solaris running, its just providing different views of itself.
    If you want to actually test solaris patch levels you need to do "real" virtualisation rather than para virtualisation provided by zones.
    So either somethig like ldoms on sparc hardware, or vmware or equivalent on x86.

  • Was told that hard drive crashed/failed. Apple support was able to retrieve downloads and docs but none of my pics or video. Help!!

    My 2011 MacBook will not boot past the gray screen with the apple. I took it in to Apple and was told that my hard drive failed. The specialist was able to retrieve all of my documents and downloads but none of my pictures and videos, which are the most important. I was told that I would have to send my notebook to a company in California to retrieve my pics and should plan to pay at least $1000-1200 for the service.
    Is there any way to get my pics and video aside from the above? How were they able to retrieve all of my other files but no pics? Can the hard drive be fixed?? I would like to replace the hard drive but am afraid to remove it from my notebook for fear of damaging it any further and not being able to retrieve anything else from the drive. Please help!!

    Salsgal,
    unfortunately, you’ve just found out the most important reason why it’s a good idea to make regular backups of your MacBook Pro’s internal disk. There are other data recovery services; call around and do price comparisons if there’s no time constraint on recovering your data, but as with any other specialist service, you’ll get what you pay for. What Apple was able to retrieve was dependent upon which part of the disk crashed; in your case, it sounds as though your picture and video folders were the ones to suffer physical damage. No, the hard drive cannot be fixed. Removing the damaged hard drive from your MacBook Pro will not damage it further, unless it is dropped, gets wet, or receives a static electricity discharge.

  • Netinstall  - Add Packages and Post-Install Scripts

    I used SIU to make a netinstall image, add 3 .pkg files to install after the restore completes, and apply some system configuration settings. I have had no issues restoring the image, but none of the post restore packages run, and the ByHost preferences are not being changed to match the client after install. The order of the workflow seems to be correct, so I am at a loss as to why I am getting the error "there was no software found to install" when the restore finishes, and the post process begin. Any help is greatly appreciated.
    I have also included a link to a screen shot of my Workflow.
    http://dl.getdropbox.com/u/12985/Screenshot%202008-09-24%2010h%2052m%2012s.png

    No, the server should be fine. I was trying to make sure that you didn't simply have an old version of the tools installed on some other system.
    You might try deleting the automator action cache files (~/Library/Preferences/com.apple.automator*.plist) on the server. Other than that, I have no simple ideas.

  • GoldenGate ADD SCHEMATRANDATA and Patch 10423000

    Hi,
    I want to enable supplemental logging just for a certain schema, so I issued:
    GGSCI> ADD SCHEMATRANDATA MySchema
    The response was:
    ERROR OGG-01783 Cannot verify existence of table function that is required to enable schema level supplemental logging, failed to find function.
    I couldn't find any information about this error code. Checking the documentation, I found that a patch must be applied:
    "Apply Oracle Patch 10423000 to the source Oracle database."
    I downloaded the patch from My Oracle Support (Patch 10423000 description: "TRACKING BUG FOR OGG SCHEMA LEVEL ALLKEY SUPPLEMENTAL LOGGING"), but when I try to apply it, I get:
    $ opatch apply
    Invoking OPatch 11.1.0.6.6
    Oracle Interim Patch Installer version 11.1.0.6.6
    Copyright (c) 2009, Oracle Corporation. All rights reserved.
    Oracle Home : /u01/app/oracle/product/11.2.0/dbhome_1
    Central Inventory : /u01/app/oraInventory
    from : /etc/oraInst.loc
    OPatch version : 11.1.0.6.6
    OUI version : 11.2.0.1.0
    OUI location : /u01/app/oracle/product/11.2.0/dbhome_1/oui
    Log file location : /u01/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch2011-08-24_17-28-30PM.log
    Patch history file: /u01/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
    ApplySession applying interim patch '10423000' to OH '/u01/app/oracle/product/11.2.0/dbhome_1'
    Running prerequisite checks...
    Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
    The details are:
    Patch ( 10423000 ) is not applicable on current platform.
    Platform ID needed is : 46
    Platform IDs supported by patch are: 23
    ApplySession failed during prerequisite checks: Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
    System intact, OPatch will not attempt to restore the system
    OPatch failed with error code 74
    The patch is for Oracle Solaris on Sparc (64-bit). Any idea? Thank you in advance.
    Valentin

    >
    ApplySession failed during prerequisite checks: Prerequisite check "CheckPatchApplicableOnCurrentPlatform" failed.
    >
    This typically indicates you downloaded the patch for the wrong platform.
    opatch apply error : "CheckPatchApplicableOnCurrentPlatform" failed (Doc ID 782903.1)
    Pre-requisite "CheckPatchApplicableOnCurrentPlatform" failed. (Doc ID 452633.1)
    HTH
    Srini

  • Why can't I add tasks and reminders manually with iOS7?  The   has disappeared.

    I just upgraded to iOS 7 and went to add a new task in the reminders app.  I realized that the + has disappeared and I am unable to manually add a task. Is this intentional? Is this a miss, or am I missing something? This is happening both on my iPhone 4S and my iPad 2.

    Same concern and request. Scrolling to the bottom of the Task list is a pain - I typically have 30 or more as part of a GTD-lite technique. Siri workaround is partly useful in the right circumstances / surroundings. And better if you are on a walk or something like that. Pls restore the +, or provide a "down arrow" to get to the bottom of the Task or Reminder list. Or put the blank "next line" at the top of the list (like Outlook has done for years). Makes me wonder sometimes whether Apple designers and execs actually use their software? Or, whether their beta tester did not come across this obvious limitation / regression. Please try harder!

  • Why can't I add email and send a file.

    I have a file to send and I can't type in the email address on the bar where it says To... Also, when I click address book blue icon I'm rerouted to buy the monthly subscription. I've emailed small things before. What am I missing here?

    When you click the Share icon and choose E-mail Document, you should be taken to the default Mail client.
    It should be no different than if you opened Mail and started a new document.
    Mail is totally NOT part of Adobe Reader. I'm really not sure what you have done. Mail can't be directing you to buying a subscription.
    Try sending an email from a different PDF file to confirm what I'm saying. Also, refer to the Help file in Reader for instructions.

  • When will I be able to add Google and Yahoo tool bars to Firefox 5. These are well used toolbars which were available with Firefox 4, why have we lost them?

    Why did we lose the ability to use Google and Yahoo toolbars when Firefox 5 was introduced.

    same problem but with ff6 this time UNFORTUNATELY it updated automatically to ff6 from ff5 and it was a disaster now I cant use yahoo toolbar either I am switching everything to IE9. I dont know if its google, yahoo, or Mozilla who is at fault but its the consumer that ends up suffering.

  • I can't download applications because of freaking credit cards can't find the click and buy or none there's only 3 options visa MasterCard and Amex can anyone help me please........

    Can anyone please help solve my problem regarding the credit card option so I can download free application from app store there no options for clickandbuy or none Thera only 3 options VISA,MasterCard and Amex.....please I really need help here".........

    This page explains how to create an account without a credit card (I'm not sure whether it's possible in all countries) : http://support.apple.com/kb/HT2534

  • Can't add packages

    I'm using SIU in Leopard (10.5.2) and once I add any packages to the "Add Packages and Post-Install Scripts" action, it will no longer let me save the workflow. I click "Save" and it just immediately comes back again with the Save dialog.
    If I remove the packages from the action, then it lets me save no problem (but I need to add packages .

    This is a bug that was fixed in 10.5.2. Your automator cache is probably still holding copies of the old "Add Packages" action.
    You can try holding down the option key when you launch Automator, this will refresh the cache, but it can be tricky to get the key down after you launch it, but before it starts (to early, you trigger "Hide other apps" too late, you miss the check in Automator).
    You can also manually remove:
    ~/Library/Application Support/Automator
    ~/Library/Caches/<any thing with automator in it> (should be 1 or 2 files)
    ~/Library/Caches/com.apple.server.systemimageutility

Maybe you are looking for