WE DEMAND CALL RATES BACK DURING THE CALL!!! 6.20....
Hi
this has been going for some time now, i reported this with Skype's second tier level support at [e-mail removed for privacy and security], i was being told that the DEVs will implement this very soon, this was May and August, YET this feature is not back.
Can someone else email them there please? They are nice answeering back but not much done for this since 5 months+.
I think is one of the MOST USEFUL FEATURES to have, that is when you call that in the window you will display call costs!
I recently upgraded to the very latest 6.20.0.104 yet the feature is not YET back!
I am quite disappointed and i think it's a technique so that people will not see what they are spending during the calls!
Anyone with me? Let's keep this thread active until someone at Skype does something!
thanks
Gabrio
It also annoys me that the call credit is no longer shown during calls. This was a helpful feature in a previous version of Skype, especially when overseas or when calling mobile numbers. As I top up the credit manually, its handy to know when one is reaching $0.00 while a call is in progress.
Bring back the call $ meter
[Removed for privacy]
Similar Messages
-
Iphone 5 with IOS 7.02 sensive to change facetime during the call
It was an issue when using Ipgone 5 with ios & above.
when talking it was so eassy to touch the screen and chnage to facetime or mute the call
as i remember from the previous time it need to press the button to call those manual out...
according to this new arrangement, I have more than 50% of call will drop during the call.
plesae help to how prevent thisHi cltbox,
Thanks for visiting Apple Support Communities.
If your iPhone does not connect to a Wi-Fi network, but other devices can, try these troubleshooting steps first:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Update your device to the latest version of software.
You can find the troubleshooting article with these steps here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers,
Jeremy -
Infos:
IPhone 4, 32 GB
IOS 7.1.2
Problem:
Videos, memos and other sound microphone using applications work without any problem. It just appears when calling or being called. Sometimes it starts during the call.
Situation:
I sent my damaged IPhone 4 to apple for reparation. I bought it for 180 € + 20 € for my retailer.
Some calls later this problem started (only at the new or repaired IPhone). My 3 month warranty is almost over (4 weeks left)
Steps to solve the problem:
- rebootet the IPhone several times
- made a backup (iCloud and ITunes) and recovered it again
- I set back all settings to standard.
--> Nothing changed
Then I went to my retailer, who sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Started at the second call I received. Now the warranty time is going to run out in 4 weeks.
Open Questions:
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. Do they want to cheat me, so my warranty runs out? Thanks for any helpI have the same problem.
IPhone 4
IOS 7.1.2
My retailer sent it to Apple, but I just received a sheet of paper where they said, they did nothing.
Surprisingly the problem still exists. Now the warranty time is going to run out in 4 weeks.
What else can I do? I have a not working IPhone and nobody want's to help me ?!? I feel lost and disappointed. -
my eraphone of my iphone 4s white unlocked make strange noises during the call and still doing the noise like an interference or saturing the spekaer
This is a common problem with iPhone 4s (and IOS 5) There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.
-
An exception occurred during the call of a business method
An unexpected exception occurred during the call of a
business method...Im calling the business object thru the business Delegate.Im calling the business method with an argument as hash table .. And Im using Oracle 9i application server.. Hash table contains data packed in the form of xml...
The exception thrown is
java.lang.IndexOutOfBoundsException int java.io.ObjectInputStream.read(byte[], int, int) ObjectInputStream.java:1808 void oracle.xml.io.XMLObjectInput.ensureCapacity(int) XMLObjectI nput.java:347 byte oracle.xml.io.XMLObjectInput.peekByte() XMLObjectInput.java :163 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1800 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1797 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1797 void oracle.xml.parser.v2.XMLNode.readChildNodes(oracle.xml.io.XM LObjectInput, oracle.xml.comp.CXMLContext) XMLNode.java:1797 void oracle.xml.parser.v2.XMLElement.readExternal(java.io.ObjectI nput) XMLElement.java:1574 int java.io.ObjectInputStream.inputObject(boolean) ObjectInputS tream.java:1212 java.lang.Object java.io.ObjectInputStream.readObject(boolean) ObjectInputSt ream.java:386 java.lang.Object java.io.ObjectInputStream.readObject() ObjectInputStream.ja va:236 void java.util.Hashtable.readObject(java.io.ObjectInputStream) H ashtable.java:799 java.lang.Object java.lang.reflect.Method.invoke(java.lang.Object, java.lang.Object[]) native code boolean java.io.ObjectInputStream.invokeObjectReader(java.lang.Objec t) ObjectInputStream.java:2214 int java.io.ObjectInputStream.inputObject(boolean) ObjectInputS tream.java:1411 java.lang.Object java.io.ObjectInputStream.readObject(boolean) ObjectInputSt ream.java:386 java.lang.Object java.io.ObjectInputStream.readObject() ObjectInputStream.ja va:236 java.lang.Object com.evermind.server.ejb.EJBUtils.cloneObject(java.lang.Objec t, com.evermind.server.ejb.AbstractEJBHome)Carol,
The file is not being read by the programmer.
The problem seems to be coming when the code tries to return from an ejb call A hashtable is returned while coming back. In this hashtable, the data is present in the form of XML DOM Object(oracle implmentation, because oracle xml development kit is used). I think this exception is coming when EJB tries to serialise the object to send it back.
So, this exception is compeletely stemming from internal classes of Oracle
The code is part of a web project.
regards,
Amol Behrani -
Decision popup on click of a custom toolbar button during the call
Hi,
I created a custom button in the CTI toolbar to open up a decision popup. The popup opens fine when i am not in the call whereas if i am in a call the popup doesn't open.
Is this the standard behaviour? If that is the case is there any workaround to open a popup during the call?
Thanks
SelvanIF param1-value EQ 'ZPOPUP'.
DATA lo_popup TYPE REF TO if_bsp_wd_popup.
lo_popup = me->comp_controller->window_manager->create_popup_2_confirm(
iv_title = 'Test Popup'
iv_text = 'Test Popup'
iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_yesno ).
lo_popup->open( ).
RETURN.
ENDIF. -
Popup on click of a toolbar button during the call
Hi,
I created a custom button in the Interaction center toolbar to open up a decision popup. The popup opens fine when i am not in the call whereas if i am in a call the popup doesn't open.
Is this the standard behaviour? If that is the case is there any workaround to open a popup during the call?
Thanks
SelvanIF param1-value EQ 'ZPOPUP'.
DATA lo_popup TYPE REF TO if_bsp_wd_popup.
lo_popup = me->comp_controller->window_manager->create_popup_2_confirm(
iv_title = 'Test Popup'
iv_text = 'Test Popup'
iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_yesno ).
lo_popup->open( ).
RETURN.
ENDIF. -
Reporting errors or exceptions back to the caller
I'm u sing OracleAS 10.1.3 and I'm exposing some of my PL/SQL procedures as web services. I was wondering what the convention is for reporting errors back to the caller. I read a little bit about Soap faults and some lack of support in the current JDev release.
Are soap faults the standard way of reporting handled exceptions? What about returning a record like:
type r_ws_response_string is record (
result varchar2 (4000),
return_code number,
error_message varchar2 (4000)
);... and having the caller check the return_code. Bad idea?
Any resources you can point is is appreciated (books/sites).
-Vahid PazirandehHi Toby,
Yes, I've come up with a working solution.
Essentially, I've made use of PL/SQL's OUT parameters and always reporting a status to the caller. At minimum, any procedure or function that I expose as a web service will have two out parameters: status, error_msg. The benefit of having a status being returned is that the caller can build logic based on different problems encountered, rather than just saying "an error occured". The error strings that you define are textual error codes, so they shouldn't change once you decide on an API.
The caller will always check for the value of status, if it is not 'SUCCESSFUL', then something is wrong. They can then log the value of error_msg so that their developers can figure out what went wrong later.
What's also nice is that the XML that's generated by JDeveloper looks clean when we're using one or more OUT params.
I don't know what the best way is to deal with this problem, but this works for me. :) Here's an example:
g_status_success := 'SUCCESSFUL';
g_status_bad_password := 'ERROR_INVALID_PASSWORD';
g_status_file_not_found := 'ERROR_FILE_NOT_FOUND';
g_status_unknown_error := 'ERROR_UNKNOWN_EXCEPTION';
procedure give_me_file(password varchar2,
status out varchar2,
error_msg out varchar2,
file out blob)
is
begin
if bad_password(password) then
status := g_status_bad_password;
error_msg := 'You entered the wrong password friend!';
return;
end if;
file := get_top_secret();
if file is null then
status := g_file_not_found;
error_msg := 'Your file could not be found';
return;
end if;
status := g_status_success;
exception
when others then
status := g_status_unknown_error;
error_msg := 'An unknown error occured. Please file a ticket.';
end;Regards,
Vahid Pazirandeh -
Disturbing sounds during the calls / impossibility to finish the call then
Dear Apple,
always when any message comes or alarm is set upetc and I am having a phonecall at this moment, always all these sounds are disturbingme during this call. And the biggest problem is to finish the call then – i cantclick on „Finish“ because of previously incoming notifications shown on thescreen. How to solve this situation? Is there any chance not to be bothered bysounds during the calls?
Thanks for your help. PavelFlip the ring/silent switch while on a call.
-
Caller doesn't hear a ring back if the call is ringing on agent phone
Hi team,
can anybody help me? Here in Germany there are a lot of customers that don't understand why the caller doesn't hear a ring back when the call is ringing on agent phone for instance with UCCX 8. I read some discussions here for that issue but the only solution for that should be to change the MOH on CUCM. This is not a very good solution when the call in queue is set to hold he will hear the ring back tone in the queue as well :-(
Has anybody another solution for that issue???
All the discussion I've read was for IPCC version 4 or so. Is there another solution for this issue in version 8.x
In one discussion I found the following solution:
Yes, To resolve this issue,Set up a Send H225 User Info Message service parameter for Cisco CallManager service in CallManager. Perform the following steps:
In Cisco CallManager Administration, select Service > Service Parameter.
Select the correct server from the drop-down list.
Set the service to Cisco CallManager.
In the Send H225 User Info Message field, under the Cluster Wide Parameters (Device - H323) section, select H225 Info for Ring Back.
Reset the H.323 voice gateway.
After completing this procedure, the caller hears ring back when the agent phone is ringing.
Does it realy work?
Need you help!
Thanks in advance.
TobiasHi Tobais
you right one of the solutions is to change the MOH to the ring back one
however there are two types of MOH that you need to select
use MOH is the music to be played while the call on hold/ in queue
use Network MOH which is the oneyou need to change to the ring back MOH source file so when the call get transferred to an agent ring back MOH will be played
these options under the CTI ports in UCCX
also you can search the forum here and there are many discussions about this topic
HTH
if helpful Rate -
Sending data during the call with java enabled mobile devices
hi every one ,
this is the problem :
i have 2 mobile phone with java enabled os , i want to call (dial) from phone1 to phone2 with java code , (this will be done by platformRequest("tell:123456"))
AND then i want to for example press key '1' in phone1 during the call some program send this key to phone2 and in phone2 i want to switch this key and understand that was key '1' ...
how can i send this data for example a key pressed event to another phone with J2ME ???
i am developing it with netbeans Mobile Application by the way ...
could you please tell me your opinion and help me in this ,
Thanks a lot ,
OmidHi Kanagaraja L,
Thanks for you response.
No I haven't created Created RFC Destination , this RFC destination will be of my JAVA system ???.
I have tried creating the partner logical system in WE20 and dine the following steps:
1. Partner No. IDES800 Ides 800 System - Sender System
Partn.Type LS Logical system
2. The tab Post processing : permitted agent is filled with default parameters.
3. Then in the outbound parameter table control I have pressed the add record button and got a new screen in
which I have made the following entry :-
Partner No. IDES800 Ides 800 System - Sender System
Partn.Type LS Logical system
Partner Role LS Logical system
Message Type SYNCH ALE:Dummy Message Type for De
Message code
Message function
Under tab Outbound options :
Receiver Port = A000000008 (This I have selected from F4 help)
Basic type = SYNCHRON
Saved it with the above data.
Now I am not able to understand how to do the things you have mentioned in 3rd step in your reply.
What are all the things I have to do kindly tell , as I am very new to Idocs so don't have much knowledge.
Edited by: Rachit Khanna on Dec 7, 2009 1:49 PM -
my iphone is a 3g and I was updating it's sofware from 4.1 to 4.2 when an error called 1604 occured during the restoration. what should i do?
Shifaau wrote:
now an error code by 1015 comes up.
Again...Search the forums or Google for the error message appearing and follow the troubleshooting steps provided. -
How to delete keypad log made during the call???
Well , i am facing this problem that i m unable to clear the key pad log made during the call.
i tried to reboot the system ,but still the problem persists.
every time i call ,the last time dailled number flash
please helpHello nandan1989,
You may need to reset your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If you're still seeing the last dialed number flashing on the screen, you may need to restore your iPhone.
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Cheers,
Allen -
HTML-DB 1.6 (Apex) calling an URL and go back to the calling page
Hi everybody,
Is there somebody who can help us ?
We have a button in your page which call an URL link. This link creates operate a job that will make an XML document. We try to use target....blank to open a new window and after the job is finished to close this new window; but it doesn't work, no new window have been created.
But, we want to go back to the calling page after doing the XML document creating job. We can't go back to our calling page, the application is gone.
How, we can do this?
Thanks. Bye.Hi Timiche,
Firstly, create a new region on your calling page and add in the following as the region's Region Source:
<script language="JavaScript" type="text/javascript">
function exportList(page)
var url;
url = 'f?p=&APP_ID.:' + page + ':&APP_SESSION.';
w = open(url,"winExport","Scrollbars=1,resizable=1,width=100,height=100");
if (w.opener == null)
w.opener = self;
w.focus();
</script>
<a href="javascript:exportList('n');">Export XML</a>
Replace n with the page number for your xml export. Notice that I've added an A tag here - you can style this to look like a button if you like.
I have also set a branch back to the calling page, but this should not be used by the A tag as it doesn't submit the page - I've just included it on my page for completeness.
Secondly, on your page containing the xml export, make the following settings:
In the Page Attributes, set the Page Template to "Popup"
In the Region's Region Definition, set the Template to "No Template"
In the Region's Report Attributes, set the Report Template to "export: XML"
And, here's my working example:
http://htmldb.oracle.com/pls/otn/f?p=42012:1
Regards
Andy -
My iphone 5C touch wont works some times , mostly during incoming call i cant take the call or some times password inputs wont works.
Greetings naseem770,
It sounds as if you are having an intermittent issue with touchscreen response on your iPhone. I would suggest that you troubleshoot using the steps in this article -
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L
Maybe you are looking for
-
Can I format a paragraph in illustrator, with multiple text sizes?
Hi, I have a number of paragraphs in illustrator that have the following... a title = Arial bold 18 pt. body text =Arial reg 14 pt. and indents with bullets It seems that illustrator only supports one font, size, color, etc. for each Paragraph style.
-
I have a report that includes a few multi-select fields which are associated with LOVs. On the report, I have the fields with LOVs set up to have a Column Filter Type of Use Named List of Values to Filter Word Contains. When there is only one value i
-
Videos won't stream (eg youtube) and safari very slow
Hi, I have 2 problems and would really appreciate any help 1 - safari very slow to open pages and has been like this for weeks. I have seen a solution to change to 'opendns' under System preferences > network > advanced tab but I cannot see an option
-
My 5700 camera, problems when i want to capture a ...
when i switch to video mode it shows me an error: general: system error! and i cant capture any video just photos or panorama. do anyone knows whts the problem!??? Attachments: New Image.GIF 22 KB
-
MOVED: my laptop (GX70-3BE) keeping having blue screen recently PLEASE HELP~
This topic has been moved to GAMING Notebooks. https://forum-en.msi.com/index.php?topic=250543.0