We detected a possible vulnerable UPnP device in your network. WAG200G

I have problem with my WAG200G Router http://n2.netalyzr.icsi.berkeley.edu/summary/id=36ea240d-31773-bb1edfd8-4df2-45c3-b23b#upnpProbing
How to fix this ? I cant auto reconnect in online games and programs. Support from League of legends said "Please, update the software on the device running at address: 192.168.1.1
Currently it uses UPnP / 1.0 may have problems."

This model modem is old and now out of date and has been discontinued and no longer being developed for FW updates. I recommend that you replace this modem with a new and up to date model modem. Ask your ISP what they support for BYOM and buy accordingly. 

Similar Messages

  • I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services.   Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

    Not sure if I am doing this right. This is my first time in the support community.
    I imagine what I put in my heading was supposed to go in here.
    I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
    Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

    Why do ISPs insist upon making things so difficult for their customers?
    If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
    http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
    Scroll down to DHCP Settings
    You will need to log in with proper "technician" credentials. They are provided in the above link as
    Username: tech
    Password: t3lu5tv
    ... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

  • Another device on the network is using my computer's ip address

    My computer is saying "another device on the network is using your computer's ip address". What does it mean?

    Hello,
    It means that another device on your network (wireless or Ethernet) has the same IP address as your computer.
    An IP address is A Internet Protocol address, a numerical label assigned to each device (e.g., computer, printer) participating in a computer networkthat uses the Internet Protocol for communication.
    If this happens you would need to change your the IP address of the device, you can check what device by going to your  router admin web page. Details depends on what router you own.
    You can check your PowerBooks IP address by going to system preferences and network. If you connect by Airport check the IP address of the Airport card, else check the IP address of the Ethernet if that's how you connect to the Internet.

  • " LogicPro has detected a possible conflict error "

    Hi All,
    I know this has been flagged before as a known issue but I cant see a specific answer based on my set up.
    Error message :
    " LogicPro has detected a possible conflict between one or more third party midi or audio drivers "
    Background :
    I have two macs, a macbook pro and a mac pro. On my macbook pro ( older system ) I have both Logic 7 & Logic Studio, On my macpro I only have Logic Studio.
    I had a completed track on Logic 7, when trying to open in logic 8 I got the mentioned error, But when I copied the track to my new mac pro system i got the same error again, the mac pro is a recent buy and a fresh install.
    Can some one please advise on how to resolve this issue, do i need to remove all automation data from the original copy within logic 7 then transfer across ?
    Really keen to sort out as planning to wipe my macbook pro and re-start from scratch when snow-leopard is released
    Hope someone can advise
    Cheers
    Andy

    I guess I'd search for all drivers, and see what comes up. Delete al that aren't Core audio, and make sure I have the current M-Audio driver for your device and re-install it. Just a guess, really...

  • My iphone icon shows in itunes but is missing from my computer desktop. It is detected as a iphone camera device. I have tried everything from unistalling-reinstalling, disabling-enabling, and updating. Still no iphone icon showing in my computer desktop.

    My iphone icon shows in itunes but is missing from my computer desktop. It is detected as a iphone camera device. I have tried everything from uninstalling-reinstalling, disabling-enabling, and updating. Still no iphone icon showing in my computer desktop. I have been troubleshooting this for 7 days with no luck! Please help?

    yes, I dony know what else to do?
    thanks

  • Forefront TMG detected a possible SYN attack and will protect the network accordingly

    Hi ,  Some times here internet is not working for using through TMG 2010. but Local Host Internet is working. then it should restart the 
    Microsoft Forefront TMG Control with related Services. then again users can access the Internet  through TMG.
    I check the Event Viewer in Server. it shows below Error Log.
    Forefront TMG detected a possible SYN attack and will protect the network accordingly
    what should for this ?
    Regards, COMDINI

    Hello,
    An offending host attempts to flood Forefront TMG with half-open TCP connections by sending numerous TCP SYN messages to a Forefront TMG server and not completing the TCP handshake, leaving the TCP connections half-open.
    Please enable logging to identified this hosts and then check if it is infected by viruses or malware programs.
    Please see the value of the number of Maximum half-open TCP connections in Flood Mitigation settings for more information.
    Once your problem is solved, you have to see "Forefront TMG is no longer experiencing a SYN attack." message.
    This
    posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Microsoft Student Partner 2010
    / 2011
    Microsoft Certified Professional
    Microsoft Certified Systems Administrator:
    Security
    Microsoft Certified Systems Engineer:
    Security
    Microsoft Certified Technology Specialist:
    Windows Server 2008 Active Directory, Configuration
    Microsoft Certified Technology Specialist:
    Windows Server 2008 Network Infrastructure, Configuration
    Microsoft Certified Technology Specialist:
    Windows Server 2008 Applications Infrastructure, Configuration
    Microsoft Certified Technology Specialist:
    Windows 7, Configuring
    Microsoft Certified IT Professional: Enterprise
    Administrator
    Microsoft Certified IT Professional: Server Administrator
    Microsoft Certified Trainer

  • "Logic has detected a possible conflict "" -- HELP!

    The full error message is, "Logic has detected a possible conflict between one or more third party MIDI or audio drivers. Be sure to install the latest drivers for all audio and MIDI equipment connected to your computer, and remove any older or unused drivers."
    OK, where exactly on my mac do these older or unused drivers live???

    I've looked through some old threads on this issue and some seem to have been produced by track automation, which wouldn't be causing my issue as none of my tracks have automation.
    Everything has worked perfectly up until just today; the only thing that changed was I installed the 3.0.1 version of Guitar Rig 3. I thought it might have something to do with the driver for Rig Kontrol hardware, so I deleted and reinstalled... Same Conflict message. So I force-quit Logic and opened a track that was all software instruements -- same problem.
    Can anyone help me? I am desperate here!!!

  • I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can  any one help

    I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can  any one help

    try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

  • The wireless system has detected a possible intrusion attack by signature..

    We are getting the following "critical" alert with the following:
    Description
    NULL Probe Response - Zero length SSID element
    Message
    {controller} IDS 'NULL probe resp 1' Signature attack detected on AP 'AP Name' protocol '802.11b/g' on Controller 'x.x.x.x'. The Signature description is 'NULL Probe Response - Zero length SSID element', with precedence '2'. The attacker's mac address is 'xx:xx:xx:xx:xx:xx', channel number is '6', and the number of detections is '1'.
    Help
    The wireless system has detected a possible intrusion attack by signature detection for a specific attacker. Immediate attention is required.
    I'm trying to find more information on this and am wondering if this is a false/positive.
    Thanks for help in advance.

    I would point more towards a false positive alert here.
    NULL Probe Response - Zero length SSID element:
    Some frames are permitted to carry a null (zero length) SSID, called a broadcast SSID. For example, a station can send a probe request that carries a broadcast SSID; the AP must return its actual SSID in the probe response. Some APs can be configured to send a zero-length broadcast SSID in beacon frames instead of sending their actual SSID. However, it is not possible to keep an SSID value secret, because the actual SSID (ESS name) is carried in several frames.
    As far as how to modify the IDS sensor in the WLC:
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008063e5d0.shtml
    HTH

  • Re: Is it possible for one device to discover another?

    Hi,
    Yes it is possible to discover devices and establish communication between devices through bluetooth. There are some J2ME devices that supports Bluetooth(JSR 82).
    Check the latest devices that supports JSR 82.
    http://www.benhui.net/modules.php?name=Midp2Phones
    There are few bluetooth applications available in www.benhui.net

    If you want to use the same account there are a number of possibilities:
    1. Set both Aperture and iPhoto to Do Nothing when a camera is connected. Then each one can launch their preferred app themselves. It's just one extra click.
    2. Use [Cameras|http://www.flexibits.com> to configure what happens when different cameras are connected.
    Regards
    TD

  • Connect to iTunes my disable iPhone to restore but the computer cannot detect my device due to network settings pls helpw

    mu iPhone was disabled I  followed the instruction   On how to restore but the computer cannot detect my device due to network settings problem . is there anybody can Help .

    iOS: Device not recognized in iTunes for Windows

  • GarageBand has detected a possible conflict between one or more third party

    I have 200 computers that when you launch GarageBand 3.0.5 it comes up with the error:
    GarageBand has detected a possible conflict between one or more third party MIDI or audio drivers
    Our image is basically 10.5.6 with mainly Adobe CS 3 suite. No other sound programs or anything sound or video related was installed besides iLife 06 and I'm not sure what is causing the issue. I have tried reinstalling iLife 06 and run all updates available from Apple and repairing permissions. I have went through the plugins in /Library/Audio folder and haven't had any luck at all.
    What gets me is under the admin account I have it working fine by removing the default emagic plugin in /Library/Audio/ etc.. but if I log in as a regular user without admin privileges i get the error.
    I have tried deleting pref files in the users Preferences folder, but I just can't find a workaround.
    It kinda seems to be like a permissions issue since the Admin account works, but I have tried pushing permissions 777 to /Library/Application Support/ and to /Library/Audio and to /Applications/Garageband.app and still no results.
    I was blaming an Apple update because things worked fine before, I'm not sure what caused it. I reinstalled the combo update and that didn't help either.
    I reformatted and installed 10.5 and upgraded using the combo updater to 10.5.6 and installed iLife 06 and installed all available updates from Apple like I have in the image and things work fine.
    But I need to get this working on our image.........Anyone have any ideas as to what could possible be the issue and might know a fix????
    Google searches the solutions I have found are repairing permissions and deleting plugins. I have tried repairing permissions and have no plugins besides the defaults, but I have already removed the emagic one and nothing else is in there.
    Thanks!!

    To get me through the year I deleted a bunch of Microsoft Office Receipts in /Library/Receipts and it fixed the issue.
    I have no idea why, deleting a receipt from another app shouldn't affect anything, but it worked. I spent many hours trying to figure out a solution and this worked!
    We are running iLife 09 now and no issues so far!

  • The driver detected a controller error on \Device\Harddisk1\D

    Hope someone can help, yesterday in the event viewer I encountered the following error
    "The driver detected a controller error on \Device\Harddisk1\D
    ....I have added no new hardware for months, I checked this out on the microsoft website but they recommend changing the cable!
    I ran diagnostics on the hard drives and they found no errors at all ....I got a feeling it the motherboard, frustrating as this is the second board Ive had!
    Can anyone advise  on this error?
    My setup is as follows
    P4 3.2GHZ
    1GB Transcend Memory
    1 NEC 2510 DVD Wrtier
    1 IDE 120GB Maxtor Diamond Max
    2 X SATA HDD
    450 watt Thermaltake Butterfly PSU

    This seems to be a common problem between ICH5 chipsets and SATA NCQ drives. Apparantly a BIOS update will be able to fixed the problem but I'm not sure which BIOS you should use. I suggest that you check MSI's website to look into your mobo's BIOS release notes to find out more first.
    Please also note that there's an amount of risk to flashing your mobo's BIOS as and improper flash will caused the mobo to die immediately or having multiple errors due to bad flash. I would recommend that you flash through a floppy bootdisk which seems to be the best method till date.

  • I have an ipad 2 an iphone 4 and run a windows pc i want to push all my current emails and folders if possible to both devices using icloud or any other option available

    i have an ipad 2 an iphone 4 and run a windows pc i want to push all my current emails and folders if possible to both devices using icloud or any other option available

    Will you be the person paying for apps on both accounts?
    Are you the only person that will use both of the iPads?
    Is there a chance students will be using the work iPad and if so, do you want personal data stored on it?
    If you're the only one using it I'd keep the same account just to have the flexibility of having access to everything on all devices. If your students will be using it or if the school is paying for the school apps I'd keep separate accounts. It all depends on how often you will use school apps from home, and home apps at school. Just some things to consider...

  • IMac cannot detect ANY usb mass storage device.

    iMac Core 2 Duo (White) cannot detect ANY usb mass storage device including iPod. Only Mice and Keyboards work via usb. Any solutions? OS X shows absolutely nothing when any usb device is connected.

    Try resetting the PRAM. Hold down Option-Cmd--P-R together at the startup chime. Wait for two more chimes, total three, then let go to finish booting.
    Try an SMC Reset. Shutdown, unplug from power, wait ten minutes, still unplugged, hold power button in for five seconds. Reconnect to power.
    Run the Hardware Test in extended.
    http://support.apple.com/kb/ht1509
    Tried a different USB port, tried a different device besides the iPod?
    Some other ideas
    http://reviews.cnet.com/8301-13727_7-10328879-263.html

Maybe you are looking for

  • I recently installed an app CARTOON HD. I stupidly clicked install as I read that it wants access to my protected data. How can I see what it wants access to and how do I delete it

    I recently installed an app CARTOON HD. I stupidly clicked install as I read that it wants access to my protected data.... I think.  How can I see what it wants access to and how do I delete it

  • Bad Performance Ipad 3

    I have expierienced following Problems: 1. when opening the smartcover the code field freeses sometimes.     Works after using On/Off button. 2. Slow Keyboard (Typing ) -sometimes 3. changing the wallpaper takes ages. 4. 1-Finger wipe with delay -som

  • Skype Keeps Quitting Unexpectedly

    Hi, ever since today my skype application just decides to keep qutting unexpectedly on me as soon as i open the application up. Here is the error code. Can someone please help me fix this problem. Thanks Process:         Skype [645] Path:           

  • Canvas on Android

    I guess still no point asking about the use of canvas on Android yet? I nearly forgot about the limitations, has anyone got canvas to work somehow - in a web view that is cheers Alistair

  • I cloud restore from ios 7 to ios 8

    I have an Icloud backup from ios7 iphone4 and trying to restore it to my new ios8 iphone5 using only icloud (can not use iTunes), it does not allow me to use this backup, only shows me other apple devises backups which i do not want. Help?