We dont have any refiners to show you
we dont have any custom refiners configured.but when users are searching in the site.they see a error we dont have any refiners to show you.How can I resolve this.please guide me.
HI Sri,As you said that there are no custom refiners but still seeing the issue.This is due to the default refiners are not able to load on the site.please check the below Thread that related to your issue.
http://expertsharepoint.blogspot.com/2014/03/we-dont-have-any-refiners-to-show-you.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
Similar Messages
-
i have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. only the downloaded new os x yosemite in the os x base system. please help
Please try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested. -
i have nework showing on my iphonw , but i dont have any signal , when i try to call it sying like callback can any one help me
If you mean you hacked it as opposed to an official carrier unlock (since it must have been carrier locked in order for you to need to unlock it), then you're on your own.
There's no telling what's wrong with it now that you've done that. -
after updating to iOS 8, all my music on my music downloading app are gone..and it's very frustrating to go to your music but YOU DONT HAVE ANY CUZ IT SOMEHOW GOT DEPTETED. Please help
Yes I updated via wifi. And no...everything seemed to work fine. But I alsa had a problem with my photos..mostly on my iPhone. I had like 900 or so photos saved on my photo stream..and I used that to hold all my photos, rightt? CUZ I could delete pics from my camera roll but they'd still be on my photo stream Well now after I updated. THEY ARE ALL GONE. And I'm really sad. I don't know how to get those pics Back.
-
I dont have any volume, I dont have any volume on an ipad 4 can you help me
I dont have any volume on an ipad 4
Hi Jlucseg,
If you are having audio issues with your iPad, you may find the following article helpful (it is aimed at the iPhone, but the steps should be similar with the iPad):
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
- Brenden -
Error connecting to OWBrepository "You dont have any repository to work on"
I am getting the message saying that "You dont have any repository to work on.OWB client will Exit now ",when i am trying to connect Repository using OWB 11.1.07 client.
Repository is available on my colleagues machine where also the database is running.
All login credentials are good, but it keeps giving me this error message.
Has anyone had this kind of error when connecting to an OWB repository with the 11.1.07 client?
Thanks for your helpError was given because we tried connecting using OWB client 11.1.06 (without patch-set) on a 11.1.07 repository
-
You dont have any repository to work on.OWB client will Exit now
I am getting the message saying that "You dont have any repository to work on.OWB client will Exit now ",when i am trying to connect Repository using OWB 9.2 client.
Repository is already available in Onsite server.
I have given all the login credentials to connect
username
password
Host
Port
Service name
Could you please advice me what will be reason for this issue?Error was given because we tried connecting using OWB client 11.1.06 (without patch-set) on a 11.1.07 repository
-
when updating itunes earlier this week i had an error and was unable to use itunes from that point on. I deleted itunes and reinstalled it and now i dont have any of my music. how do i link the two together i still have the same i.d. and password
You can redownload most itunes purchase by the following. What you can redownload depends upon where you are located.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I create my apple id from my boyfriend macbook and its says that I have to review my itunes information , when I get to the credit card number info etc. Its keep asking me for that I dont have any credit card and I dont want to put any , what should I do?
You cannot use that ID without a credit card. You did not create your account correctly. There is very specific way in which you must create your account if you do not want to use a credit card. If you don't have a credit card, you will have to start all over again.
1. You will have to sign out of that ID before you can create a new one. Settings>iTunes & App Store>Apple ID>Sign out.
2. You cannot use the email address that you used for the first ID that you created. You will need to use another email address now
3. You have to download a free app in order to start the new Apple ID process.
Read this before proceeding.
http://support.apple.com/kb/HT2534 -
I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD with OSX Lion as far as I know.
Ideally, you should clone your HD as Bimmer 7 Series explains.
However, if your computer originally shipped with Lion or Mountain Lion, a clone is not necessary to merely reinstall OS X. OS X Internet Recovery will create a recovery partition, download the installer package, and install it on a completely empty SSD or HD.
Even if your computer shipped with Snow Leopard, it may be eligible to download a firmware update that creates the same ability: http://support.apple.com/kb/HT4904 -
I dont have any Applecare registration number. I bought my Mac a year before and is still under the warranty. I dnt how to find or purchase applecare registration number. Please help
Enter your MBP serial number here and you will then be able to determine the warranty status.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Ciao. -
My ipod touch has been disabled and it says connect to itunes, and I dont have any access to the primary computer that i used first , what do I do ?
put it into recovery mode
See here
http://www.apple.com/support/ipodtouch/assistant/restore/
Then restore
http://support.apple.com/kb/HT1414
You'll probably lose all your data -
i backed up my ipod and i lost all my music. And its not letting me put my music back on my iPod and i also tried to buy a song from iTunes but it didn't download to my IPod. So now i dont have any music on my ipod now
What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod -
I have lost my iph4s which dont have any sim and it is blocked as well now how can i get my phoen.
<Personal Information Edited by Host>Look for it.
There is nothiong else to do.
You should probably change your passwords -
how could I turn on genius without credit card information? I dont have any credit cards ...
Unless the instructions on this page are followed when creating an iTunes account : http://support.apple.com/kb/HT2534
then credit card details will need to be entered before the account can be used to download any item from the store.
If you are getting a prompt to review your account when trying to use it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will need to create a new account, and use the instructions on that HT2534 page when creating it. If you want to use the same email address then you will need to replace it on that account first e.g. by tapping on it in Settings > iTunes & App Store on your iPad, via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com
(For future info typing all in capitals is considered shouting and makes posts difficult to read, and may mean that people are less likely to reply.)
Maybe you are looking for
-
Why I can no longer save videos (*.flv) from my cache folder?
Well, I don't speak English. I'm sorry. Até o Firefox 3.6.16 eu conseguia salvar um vídeo (*.flv), do Youtube por exemplo, a partir da pasta cache. Por que não posso mais fazê-lo no Firefox 4.0? A partir disso, desinstalei o Firefox 4.0, voltei para
-
Line item number and ledger item number posted differently
Hi Friends , I have a BAPI for posting the documents in SAP from another system.This BAPI is using the standard BAPI - 'BAPI_ACC_DOCUMENT_POST' to post the documents.But when I post the document using this BAPI the line item number and ledger item
-
Iphone 4 Bricked (DFU doesn't work)
Okay so I decided to update my Iphone 4 and for some reason it failed and I got an error. Now my Iphone doesn't go on at all unless plugged into a PC. So I've done a number of things to try and fix the issues of my Iphone with extensive research, i'v
-
I have run Mac Office fine for several months now. Then the other day when I tried to open Word I got this error: Application Launch Failure The application Word couldn't be launched because of a shared library error "< Microsoft Word > <Microsoft Wo
-
Refreshing only 1 column in MV (not the full MV)
Hi, I have a MView with several columns and I need to refresh only 1 column in it. Is there a way for doing that? I don't need to refresh complete the MView (which is very time-expensive in my case). Database: 10.2.0.3