We get many report with same computer in the SCEP alerts.

Hi,
We get many report with same computer in the SCEP alerts.
I have an email sent to support desk for "Malware detection", but same computer ends upp severaltimes long time after it have been cleand with success. I dont have "repeated malware detection" alerts enable.
So why same alerts reported several times even if it have been removed?
/SaiTech

Hi,
Please refer to the link below:
How to Configure Alerts for Endpoint Protection in Configuration Manager
http://technet.microsoft.com/en-us/library/hh508782.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • BI: Virtual Provider for ECC Report with same selection parameters

    Dear all,
    I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
    Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
    It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
    As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
    Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
    Please mention if i miss any point in explaining problem.
    Feel free to ask for any query.
    Many thanks.
    Hoping for positive and quick responses.

    please create 2 reports as given below.-
    REPORT  ZSZP_00007.
    parameters a(5) .
    parameters b(5) .
    parameters c(5) .
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
    IF screen-name = 'A' or screen-name = 'B' .
      get parameter id 'aaaaaaaaaaa' field a.
      get parameter id 'bbbbbbbbbbb' field B.
    screen-input = 0.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    start-of-selection.
    your logic
    REPORT  zszp_00005.
    PARAMETERS a(5).
    PARAMETERS b(5).
    START-OF-SELECTION.
      SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
      SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
    your logic
    SUBMIT zszp_00007 VIA SELECTION-SCREEN.
    i hope this approach will solve your problem.
    thanks
    Swanand

  • Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

    Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

    See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
    Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
    It depends on how amicable the split is...
    tt2

  • I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out".  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record.  Although when I play the same song over again, the "miss" occurs in a different location during the song.  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • Access Connections - Many APs with same SSID (Again)

    I have a W520 running Access Connections 6.11 (release December 2013) on Windows 7 Pro 64-bit.  Access Connections is still broken in regards to dealing with multiple Access Ponts having the same SSID.  It keeps hoping from one access point to another regardless of signal strength of the AP.  
    The most desirable strategy would be if Access Connections would find and lock on to the best signal strength AP and stay there.  However, it doesn't do that.  It acts almost randomly.  It also keep shifting around.  The rate is almost random as well.  Sometimes it will stay locked on to an AP for up to 10 minutes, at other times it shifts in as little as 30 seconds.
    Other laptops, from other manufacturers like HP, Toshiba, and Apple do NOT exhibit this behavior on our campus.  Other Lenovo machines running Access Connections DO exhibit this behavior.  The problem is NOT machine specific (ie, not hardware or some weird idiosyncracy of the particular W520 i'm posting about).  The problem is Lenovo's Access Connections.  The problem is also not a configuration issue with the campus.  I have a network at home running Airport Extremes all having the same SSID's and the W520 in question does exactly the same behavior there.  Totally different hardware at home vs campus and same behavior.  I cannot change the names of the AP as a fix.  This is not a capability in the configuration of the AP's.  Even if it were, I shouldn't have to do it.  Campuses are often configured in this way.  Campuses that are large commercial users who I believe are the most lucrative Lenovo customers.
    This problem has been going on for literally years with different versions of Access Connections.  Here are two threads in the Lenovo Community I found in under 30 seconds.  Neither was solved correctly.  In other words, Lenovo never fixed the software, and people had to either give up or resort to kludge solutions in their campus configurations.  
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/Is-it-possible-to-default-to-a-specific-Access...
    http://forums.lenovo.com/t5/ThinkVantage-Technologies/Access-Connections-Many-APs-with-same-SSID/m-p...
    Lenovo has actually made the problem progressively worse over time instead of fixing it.  They have done this by removing the abilty to prioritize AP's by MAC address.  Initially, Lenovo allowed you to configure 5 MAC addresses in order.  Then, Lenovo removed that capability making it possible to only give a single MAC address as preferred.  Finally, in recent iterations, Lenovo removed that capability alltogether.  The box is still there in the UI, but it's greyed out.  It is very frustrating to have this kind of thing happen.  The prioritize capability is fundamentally a kludge, but at least it's something to give a bit of a workaround.  Now we don't even have that.
    Can a lenovo engineer please look at this issue and give me a timeline for resolution?
    BTW, It is still not possible to configure Access Connections with a blank SSID either.  I bring this up, because if you're going to fix the Access Connections code for multiple SSID's, you should be aware of the blank SSID problem as well.  I imagine they are both in the same part of the Access Connections codebase, at least from a logical standpoint.
    Thank you.

    I found that there is a setting in the Intel driver (15.9.1.2, released 8/22/2013) for the wireless card (Centrino Advanced-N 6205).  The setting adjusts the "roaming aggressiveness".  I can only guess this means how often the driver goes out and tries to find a "better" signal and/or bandwidth.  The card supports a/b/g so the calculus is complex as to what constitutes "better", and I have no idea how sophisticated the algorithm the driver uses is.
    That said, if I set the "aggressiveness" to the most aggressive setting, things work somewhat better.  They are still not as a good as other wifi managers bundled with competing products (specifically HP, Toshiba, and Apple so far), but it helps.  It does appear that more of the time now, the AP having the best signal appears to be the AP the laptop is attached to.
    Lenovo, please consider that forcing your customers to dig around in arcane driver settings and relying on the whims of driver writers and hardware companies to do things correctly and well, is a recipe for failure.  Your customers are just going to get annoyed and say to their colleagues, "My old Toshiba seemed to do a better job of WiFi connections. I think next time, I'm going to have IT get me one of those again."   And, of course, that colleague will look a lot harder at buying the Toshiba instead of the Lenovo, as well.  Wifi connectivity is a very big deal for people who have to move around - and lets not forget, this is a laptop we're talking about, which is explicitly designed to, well, be moved around.
    I apologize for being so pedantic, but it often takes such measures to get managers in these companies who control programmer time, to take these issues seriously and allocate the programmer resources to fix these problems.
    The problem I am having is still not considered "fixed."  I would very much like to hear any other solutions that work better.  I would love to hear from Lenovo on the matter.  Still waiting.
    Thanks.

  • Getting corresponding report with respect to the specific uitlity

    Hi
    I have 7-reports with same columns but for different 7-utilities(seawater,portable water, gas consumption ...etc). If suppose user enters one utility(seawater) in the selection screen then he/she needs to get corresponding "SEAWATER" report .
    Samiliary for other utilities also.
    so how can user gets corresponding report with corresponding with specific uility.
    pls let me knw
    regards
    kumar

    Hi Kumar
    Do you mean that
    1. You want 7 reports for 7 utilities with the same column Structure and how can user get these?
    If this is the case, create 7 Queries and use the same re-usable structure in the Columns. Then go ahead and rsestrict the Utilities with the specific utilities in Free Char. Give the name as per the Utilities, so that the user can distinguish between these queries.
    OR
    2. You want one report and user has the choice which utility he wants to run the report for, then....
    Create on report with the rows/columsn that you want. Create a variable on the Utilities Info-Object and restrict the Utilities Info-Object with this variable. So user will be prompted to enter this variable for utility and corresponding report will be generated.
    Does this answer your question?
    Cheers
    Abhishek

  • REPORT WITH CHANGING ITEM ON THE SAME COLUMN

    Hi to all,
    i'm trying to build a report with different item in the same column.
    Is that possible in any way using other Oracle technique?
    i'm not doing anything specific here, only i would like to know if the following possibility exist or not and how can i let apex render the htmldb_item fields 'dynamically'.
    Using this CODE inside a PL/SQL function body returning sql query I obtain the following report content. Such the code of htmldb_item.fields is written, as a field value the HTML_ITEM is not rendered, so only the description of them appear in the report.
    Does somebody know some tricks to make it work?
    Thanx a lot
    1     2     LAST_CALL     htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,'dd/mon/yyyy') VALUE
    21     1     AGE     htmldb_item.text(4,FLD_VALUE,10,10) VALUE
    create or replace FUNCTION FNC_GEN_GUI_ITEM(ITEM_TYPE NUMBER) RETURN VARCHAR2 AS
    STRHTMLDITEM VARCHAR2(4000);
    BEGIN
    CASE ITEM_TYPE
    WHEN 1 THEN STRHTMLDITEM:=' htmldb_item.text(4,FLD_VALUE,10,10) VALUE ';
    WHEN 2 THEN STRHTMLDITEM:=' htmldb_item.date_popup (4, ROWNUM, FLD_VALUE,''dd/mon/yyyy'') VALUE ';
    END CASE;
    RETURN STRHTMLDITEM;
    END FNC_GEN_GUI_ITEM;
    MY TABLE AS FOLLOWS:
    CREATE TABLE "NEWPROJ"."DINFIELDGUI"
    (     "ID" NUMBER NOT NULL ENABLE,
         "FLD_TYPE" NUMBER,
         "FLD_NAME" VARCHAR2(4000 BYTE),
         "FLD_VALUE" VARCHAR2(4000 BYTE),
         CONSTRAINT "DINFIELDGUI_PK" PRIMARY KEY ("ID"));
    Message was edited by:
    Marcello Nocito

    Hi to all,
    i've solved, is very simple using decode inside the select:
    SELECT
    ID,
    FK_HTMLDB_ITEM, DECODE(FK_HTMLDB_ITEM,1,HTMLDB_ITEM.DATE_POPUP(3,rownum,VAL,'dd-mon-yyyy'),2,HTMLDB_ITEM.TEXT(3,VAL)) VALORE
    FROM TESTID
    my table is:
    CREATE TABLE "DEV"."TESTID"
    (     "ID" NUMBER NOT NULL ENABLE,
         "FK_HTMLDB_ITEM" NUMBER,
         "VAL" VARCHAR2(4000 BYTE))
    Bye Bye

  • How to export 2 different report with a link at the same time

    Hi,
    Do anybody know how to export 2 different report with a link at the same time. I currently create a report which link to another report. But when I want to export the 1st report I also want the 2nd report also be exported.
    Thank you very much.
    Best Rgds,
    SL Voon

    Export all the three components individually.
    It will generate 3 script files. Now run them from SQL>
    null

  • My IPod will not sync with my computer.  The word IPod appears in the bar at the top right area of the screen, then a message box appears stating that my IPod could not be found.  Any suggestions?

    My IPod will not sync with my computer..The work IPod appears in the upper right area of the Itune window, then a message box appears stating that 'download could not be copied to the IPod because it could not be found'.  Any suggestions?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reboot the computer
    - try another cable
    - Try another USB port
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • New Windows 8.1 Connected to company NAS, now switching identities with another computer on the NAS

    So I recently installed a new Windows 8.1 computer and mapped a network drive to the company NAS.  Now, this new computer (let's call it Joe) has switched certain features with another computer on the NAS (let's call it Marie).
    - Joe and Marie have switched histories in Chrome
    - Joe has Marie's Chrome bookmarks
    - Marie can see and access Joe's mapped network drives
    - Joe's Chrome automatically brings up Marie's saved IDs and password for email and online databases
    However
    - Joe's computer identity remains Joe in computer properties
    - Other software besides Chrome are acting in the normal, separated fashion
    "Joe" has been using the computer a bit since I installed it, so I don't know everything that has been done to the computer.  What would make PCs partially switch identity like this, and how do I fix it?  Is there some way that
    Windows 8 maps network drives differently?  Is this a virus (both computers have BitDefender)?

    I will have to double check again to make sure I'm telling the truth (I've gone through so many iterations in the past weeks I can't remember which way is up :-)  but I believe that the drive was showing in offline files, but that attempting sync (even
    repeatedly) did not bring the drive contents back.  Which also begs the question, if the user has not made the drive "available offline" why would it be acting like it is?  I've considered actually making it available offline, but I don't want
    all of that data on his laptop and I'm also concerned that we'd then have more problems as he continues to work for hours and days on his offline copies.
    I should also add that I was able to work with the client on Friday and we were able to determine that the VPN is NOT dropping as we're able to ping devices on the LAN side immediately once the files disappear.  
    Cheers,
    Mike

  • Problem opening reports with a user in the Oracle Directory.

    I have already followed all the steps in the user's guide to run reports with a user in the Oracle Directory.
    I accessed the enterprise security manager and created the mandatory xml publisher roles, besides I created another role. I added user A to the new role I created.
    I accessed then the administrator tab in XML publisher. I went to roles and the role I created was there. When I tried to add a folder. I'm able to add the folder there. I click on apply and then when I enter in the security Settings again the folder is not there anymore.
    I get the following error in the log:
    [021207_103218621][][EXCEPTION] oracle.apps.xdo.servlet.resources.ResourceNotFoundException: /opt/oracle/infra2/j2ee/home/xmlpublisher
    /Admin/Security/security.xml
    When I access xml publisher with the user A, who belongs to the new role I'm working with, I'm not able to see any folder, nor anything else.
    Do you have any ideas about what could be going wrong?
    Thanks,
    Joaquin

    Can you replay how? I have been facing this problem for nearly 3 months without any solution. Please help me.
    Debarati

  • I am new to this. How do I get my movie from my computer to the tv. I have apple tv.  I am really dumb when it comes to this stuff.

    I am new to this. How do I get my movie from my computer to the tv. I also have apple tv.

    In iTunes turn on homesharing.
    On your ATV turn on homesharing.
    The ATV should then see your computer as long as you enter the same id on both machines.
    Your content should then appear under the computer setting on the ATV, then watch away...

  • TS1398 I can no longer sign in to my home fi (bt hub) with my iphone 4. Yet I can get on wireless with my laptop so the hub is working. The only thing Ive done different recently is download and use an app called Onavo mobile ltd which Ive now deleted, he

    I can no longer sign in to my home fi (bt hub) with my iphone 4. Yet I can get on wireless with my laptop so the hub is working. The only thing Ive done different recently is download and use an app called Onavo mobile ltd which Ive now deleted, help pls?

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation

    I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation of 12, which I am removing. How do I correctly unstall the old Elements 12, and install the new elements 12 from disk, and retain all albums and libraries from the old Elements 12?

    You're welcome.  It was not an answer, it was a question, and it could lead to being helpful if you explain why you think you need to uninstall.
    As far as uninstalling goes, you will uninstall it like you do for any program, which depends on what kind of operating system you have.  If you wish to retain albums and whatnot, maybe the following link can provide some guidance.
    Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#ma in_Special_notes_if_you_restore_a_catalog_from_a_previous_version_of_Photoshop_Elements

  • I cannot sync my iphone with my computer.  The error message says the ipone sync fails to start,how do I correct this?

    I cannot sync my iphone with my computer.  The error message says the ipone sync fails to start,how do I correct this?

    try a reset on your iphone
    make sure you have latest version of itunes
    try updating your iphone over wi-fi before connecting to your itunes
    reconnect ,try other usb ports
    good luck

Maybe you are looking for