We had a lovely opening, largely blank page that had the little fox logo and above it, a search block, I want it back.
I called our ISP (Exede/WildBlue) about problems with connections and speed. My wife tells me I should have expected this, but their "help" - a woman with an accent that was decidedly Indian - told me it was because of Firefox. I followed her directions, and now I have the same problems with connections and speed, but my start page is gone. It was largely a white page, with a search block in the center and the little fox/world logo below it. There was a bar across the top that had a pull down for accessing certain (I guess frequently-used) sites. That's still there, but the search block no longer offers what I had typed in previously.
I am hating this "help" person. I am pining away for my old start page. What do I do?
Thanks,
Dave Walker
Madperson:
You are a god. I was wrong about the positioning of the logo. It's actually above the search block.
I didn't mean to imply that I have any particularly bigotry-based dislike for Indians. I have a problem with thick accents and when coupled with my virtually complete computer illiteracy, it's a rough road.
In any case, my opening screen is back. Thank you so much.
Dave
Similar Messages
-
Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas re fixing this? Problem remains even when I open an earlier version on the previous version of Pages
It has always been that the upgrade tries to be the "master" over the older version.
Anyway in Pages 09 you have probably the Comments field showing, making all contetn to move to the right.
Go to View menu > Hide Comments. -
After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....
If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.
-
I deleted the top toolbar by pressing the x on the side and now I don't know how to get it back!
Hi Emily,
In Pages '09, I'd suggest trying the View menu. I don't know how that corresponds to Pages for iOS.
Regards,
Barry -
So here is the situation, my company uses a third party scanning software, that puts documents scanned or created onto a webserver. We use a program that grants a user access to view the documents on the webserver. The user will have to log into the system
using credentials, we have Kerberos doing this. Once the user is logged onto the system they navigate to the document they want to view or edit. So the user wants to view a .pdf file, they click the document they want, and it is supposed to open in the default
program associated with file extension. ie: .doc would open Word, .xls would open Excel. When the document is loading in the default program Internet Explorer opens a blank page, this page is supposed to prompt the user if they want to open or save the document.
(I changed the registry to have the files selected to automatically open without this prompt.) The blank screen generated is still staying open, this screen is supposed to close automatically after the prompt or close automatically after the document is opened.
So when a user is looking at several documents, this floods the screen with all these blank Internet Explorer pages. This problem is only occurring for users that have Windows 7 PC's, XP users do not have this problem at all. My PC is the only one in the company
that is Windows 7 64-bit, and working properly with the IE blank page automatically closing. I'm wondering what can be done to fix this problem, is it as simple as registering some .dll files or do I need to make a registry change? Any help would greatly be
appreciated.What is the registry change exactly? Sounds like one which is supposed to avoid the prompt. I know
that there used to be such a thing, before the new prompt and I know that some users think that there should be such a thing for any program but I'm not sure if that expectation is valid or not. I think this may also be related to a concurrent change
in the OS. E.g. in XP we had File Types Options editor but starting in Vista that was removed. You might get some more clues on this tack from NirSoft's FileTypesMan utility.
The registry change that I did was to remove the open and save prompt. I will be sure to look into that. Our company
isn't worried about the user's automatically opening the files since they are all trusted. They also do not have the ability to install anything, so if they were to download a potentially harmful file they could never install it. We monitor downloads as well,
if they download files off the internet that aren't work related we remove their download capabilities.
Sounds like a scenario for using ProcMon to take two traces and compare them for their essential differences.
I talked to my boss about using this tool and he is worried about using it. I'm only an intern at my office and do not have the authority to use a program without their knowledge or consent. I will run the idea by them again and see if it's okay I use this.
I'll maybe make some presentation about how it can help us with our problem and how much time and money it will save. Because I really want to get down to the bottom of this.
Probably the most significant thing is going to be the Content-type that the files are being served by.
You could use the Developer Tools, Network Capture to check on that and ProcMon could help explain what happens after that. A related workaround to change the symptom when the Content-type is not what is expected is to disable MIME Sniffing (e.g. in
Security options, Miscellaneous section). In fact, perhaps that could explain your machine's difference with anyone else? MIME Sniffing is a default, previously known as "save according to type not extension" (or some such wording).
Okay I will be completely honest I have no idea how to use Developer Tools (F12), yes I could google it, when I tried using it on the blank pages it would never work, I also have no idea what I'm looking at. I should mention that I do not have access to
the web server. Our programming and development side only has access to our AS400, which is where the web server is located. I do have MIME Sniffing enabled and so does everyone else. I may be wrong but, I believe it is needed in order to open the file extension
in the correct default program, yes? I thought MIME Sniffing would see a .docx file and then find the appropriate program to open that .docx file in. I may be wrong but I know it's used somehow along these lines. -
When opening a new tab, IE9 opens a blank page, not the new tab page
I change my settings to open a the new tab page when I open a new tab. This works for one boot of Windows. Second boot, the settings have magically changed back to opening a blank page.
It worked to start with. I only just reinstalled Windows on this computer. Then a few days ago I didn't get my most recent sites when I opened a tab. Changed the settings. Next boot. They had reset.
It seems as if the settings do not save. I had this problem on my older computer as well. Never found a fix.
To clear up misunderstandings (there are some similar posts), when I select a link to open in a new tab, it always works.Hi ,
In order to clarify the issue clearly, I would like to ask the following questions:
Did you make the steps below to set “When a new tab is opened” to open your first home page?
Open a new tab to your home page in Internet Explorer
http://windows.microsoft.com/en-us/windows7/Open-a-new-tab-to-your-home-page-in-Internet-Explorer
Will the home page change back after the second boot?
Is this setting able to be saved?
Is this your home pc?
What’s the operation system?
Generally, this issue will not persist after reinstalling the Windows.
I would recommend you to perform the steps mentioned below and check if it helps:
1. Temporarily disable all the third party security programs and boot in
Clean Boot to test the issue.
2. I would suggest you to optimizing the internet explorer for better performance and check if it helps.
How to optimize Internet Explorer (Also applicable for IE 9)
http://support.microsoft.com/kb/936213/ro
Note: Resetting Internet Explorer’s settings is not reversible. After a reset, all previous settings are lost and cannot
be recovered.
Tracy Cai
TechNet Community Support -
How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.
Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab? -
I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.
Your previous tabs will not re-open or be available to re-open when starting Firefox if:
*your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
*you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
*you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?
That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark -
-Why when I open same PDF in Photoshop in opens as blank page (all the graphic info disappears)???
-And why when I'm trying to measure a page in the "image size" (in order to send to client, for example) the graphic info disappears as well??Hi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian -
Usually the browser will take the user to info pages when a click on blue text is done. My browser just opens a blank page and has "search history and bookmarks and then just sits there. I can change that so it will do nothing and the message is "type a web address". It used to work fine. How can I fix this.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
When I search for a web sites, it gives a list of connected web site.
If I click a particular web site, it immediately opens a blank page and says"done" at the bottom of the page. The opened web address is wrong even though the link property shows the correct address.
What is wrong?
Chandra DhasPublish your site to a local folder and launch it in your browser by double clicking the index.html file to see if the problem exists there.
-
How to make firefox open a blank page every time i open a new tab
Due to the recent update of Firefox to version 16.0 it opens my most visited websites every time i open a new tab i want it to do what it used to do all the time i want it to open a blank page every time i open a new tab.
thank you.hello yon1000, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.
-
Why does caps lock on every time I open new blank page
Every time I open a new blank page, the Capitalization switches on. It doesnt happen with the other pages I choose. Just the blank document page. This annoying habit continues as I start a new line, and sometimes the underline and Bold format pops on also. I have to keep going into the format header and keep switching them off. After a lot of experimenting, I believe this malfunction is what is screwing up my uploads to the web, by messing with the script. Has anyone encountered this problem or know how to fix it? It only happens with the darkroom template blank page which is the one that my site is built with. I've tried clearing the cache, rebooting ect.
Message was edited by: kelly12
Message was edited by: kelly12The first two text boxes in the Darkroom page are all caps. But any new text box will be both upper and lower case. It's designed that way. If you want to use lower case then delete those boxes and add new ones in their place.
You can try reinstalling iWeb but I don't think it will help. I'm on a new iMac and that's how the Darkroom theme works on all the pages. The top text box and the next one down.
OT -
When I open firefox 4.0 from task bar it opens 10 blank pages all at once real fast.
When I click the Firexfox 4.0 icon from my task bar it suddenly opens 10 blank pages all at once so every time I open it I have to close 9 pages to get back to one.
Very frustrating and a big time waster.Check the Home page setting.
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
This can also be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore
Maybe you are looking for
-
I have a question about AP payment, when I create a new payment, the payment status is always "negotiable" which means I'll see it in the bank statement in Cash Management Module to clear it. but the case here this payment is cash, and I don't need t
-
IMac vs Mac Pro for Graphic Design Studio
We are upgrading the macs in our in-house graphics department (3 mac users) and wanted to see if anyone had advice on weather to choose a high end iMac or the new 2014 Mac Pro. To help here is what we do on our macs (currently 20inch iMacs). Photosho
-
I have a new MacBook Pro with Iphoto installed when purchased. When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation. However, after leaving Iphoto and shutting down the computer, and
-
Multiple Queries on Same/Different Table?
Hello all, I have started to learn how to integrate java with databases using JDBC. However I have a question that would make my life much easier. From what I've learned everytime I want to do a query, I have to create a new statement and new result
-
hi at the time of register updation system is giving one message (lower the darte range performance will get effected.) all entries entered in register is correct it is warning message.