We have 2 ipads. What do we need to do to play each other in game center

We have 2 ipads. What do we need to do to play each other in game center.

You don't play in Game Center. Game Center is just a tool you use to connect to other users. You first need a game that offers multiplayer action between devices, and then you connect to the other user(s) via whatever instructions the game provides. Some use Game Center while others use some other system, often their own.
For information on Game Center, if your game does use that, see:
http://support.apple.com/kb/ht4314
Regards.

Similar Messages

  • HT1937 I have lost my ipad and alr bought a new one but somebody still uses my game center ID to play my game even I have alr changed my password for GC.what can i do to stop them to use my one? Thank you

    I have lost my ipad and alr bought a new one but somebody still uses my game center ID to play my game even I have alr changed my password for GC.what can i do to stop them to use my one? Thank you

    I need answer from anyone can do too.

  • HT5616 when someone sends me a message with imessage I only get it on either iphone or ipad, what do I need to do to get the message on both iphone and ipad

    when someone sends me a message with imessage I only get it on either iphone or ipad, what do I need to do to get the message on both iphone and ipad

    You need to make sure that the setting You can be reaached by iMessage at: is the same on both devices or at least have a common entry.

  • HT2311 My computer is asking me to close itunes when installing the upgrade. I think I already have! What do I need to do?

    My computer is asking me to close itunes when installing the upgrade. I think I already have. What do I need to do to close itunes after closing it?

    Welcome to the Apple Support Communities
    First, open Activity Monitor (it's in /Applications/Utilities) and kill "iTunes" and "iTunes Helper". Then, run the installer. If it doesn't work, restart your computer and install the update again, and if nothing works, start your computer in safe mode (holding the Shift key while your computer is starting) and install the update

  • HT3775 hi, what do i need to do to play AVI file on my new macbook pro

    hi, what do i need to do to play AVI file on my new macbook pro

    Try installing Perian.
    (66938)

  • My two iPads share an Apple ID.  How can I create a separate Game Center account so they can play each other?

    My two iPads share an Apple ID.  How can I create a separate Game Center account so they can play each other?

    1. This is a year old post.  Things have changed, the answer is no longer accurate due to how the OS functions now.
    2.  You can't have a second Gamecenter account tied to the same Apple ID, because the Apple ID is the game center account.  They are not separate things.
    3. The OP said they had 2 iPads, which means they can use a different Apple ID for Gamecenter on the second iPad.
    4. You can still creare Apple ID's specifically for game center without changing them for the other services on the other devices.
    ronjack wrote:
    I have the same issue.  Young children who cannot get Apple ID's but we all want separate Gamecenter accounts.
    You need to get Apple ID's for them.  They aren't getting them, you are. You can manage these new ID{s yourself. You can even make sure they have no credit card and are not associated with any other service on the device. So essentially they are Apple ID's for GameCente only.

  • How can I have two PDFs open at the same time next to each other?

    How can I have two PDFs open at the same time next to each other?

    Moved to Adobe Reader for iOS.
    The only way I know how to do that is with two iPads.

  • I'm trying to find an addon that I used to have. It had blue and pink stickman people fighting each other's colored teams on the screen.

    I'm trying to find an addon that I used to have. It had blue and pink stickman people fighting each other's colored teams on the screen.

    This didn't help!

  • AirPrint has stopped working from my iPad; what do I need to do to get both printing wirelessly again?

    Air print has stopped printing on both my I Phone & I Pad!  What do I need to do so I can print again from both devices?

    Have you tried the troubleshooting included here:
    iOS: AirPrint 101

  • I have ipad 2 16gb wifi, recently it starts autorestart and crashs out of games and apps, more than 20 times aday- tried to restore, updated to the latest 7.0.4 but still the same problem

    i have ipad 2 16gb wifi, since 3 months it started to autorestart and crash out of games and apps, more than 20 times aday- tried to restore-install as new ipad- soft and hard reset-, updated to the latest 7.0.4 but still the same problem
    plz help....

    Vinayaka-
    After all you've tried, Dah*veed is probably right about needing warranty assistance.
    But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
    Try unplugging your WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect to your WiFi.
    Fred

  • How to resolve on my iPad: Unable to connect to server error when trying to log into Game Center?

    When I try to log into the game center, i get an error message that says: unable to connect to server due to an error communicating with the server.
    I have logged off iTune and any other app I was logged in, I have done a hard reset of my iPad, I have reset my modem, but nothing had any impact and I am now frozen out of my game center.
    Anybody has an idea of how to resolve this?
    Thanks,
    J

    1) May be there is a mismatch with the jar file name and the filename in the jad properties ( happens only if you rename the jar file)
    2) Check hollywood jad properties and the ringtone jad properties. May be the complete url is required for the jar file.
    3) If you are using any restricted APIs in your midlet, then make sure your jad properties has the required permissions.

  • BODS / SAP : what set-ups are required for communicating with each other ?

    Hi.
    There is a new SAP system
    And there is a new BODS installation.
    Both on independent server machines but on the same lan network.
    On the test system of BODS. We tried to see how the communication happens with SAP.
    While we try some test jobs by trying to pull a simple table on SAP R/3
    In Dataflow, we used simple SAPR/3 ABAP flow. And put it into target database thro query transformation.
    In the datastore,
    We used the Generate and Execute option,
    with a path on the local directory of BODS server for creating the ABAP program and the dat file.
    However,
    We are always getting error on batch job schedule.
    Although the user is having rights on the R/3 table
    And can login into SAP R/3 system and check the table.
    Still we get an error saying Databstore unabel to connect to R/3 system. Check for user login etc.
    For anyone whose login we use. We get the error.
    However, if i directly generate the code on the ABAP flow (without running the job),
    make the program available on R/3 system.
    and then run the job as execute preloaded
    this works fine without any error.
    and we are able to see the data in the target table.
    Now both the systems are new.
    And am not aware of the initial set-ups which are required for communication between SAP / BODS.
    Are WE missing something on the SAP side setups - for generate and execute option to be used?
    Is there anything specific to be done for ease of the communication between SAP server and BODS server in this regard.
    Can anyone share some inputs on this.
    Actually for any user with full admin rights too, on the sap side, if we use the user login for R/3 connectivity for this particular "generate and execute" option,  it errors out after nearly 10 minutes. Then the error says, login info not correct.
    So basically, the communication channel by itself between SAP R/3 and BODS seems to be locked somewhere.
    If anyone with SAP admin expertise - can help or advise on this.
    Many thanks
    Indu
    Edited by: Indumathy Narayanan on Sep 13, 2011 9:20 PM

    Getting data out of R/3 requires two distinct setup tasks, and they don't have much to do with each other.
    The first basic task is to get the little ABAP extraction programs loaded and run in R/3.  You can pre-load them and then call them, or generate, upload, and execute them all on-the-fly, at BODS runtime.  During development, use "Generate and Execute" for your ABAP.
    Once that's done, you have four different choices to get the data back: "Direct download", "Shared directory", FTP, and "Customer Transfer". Normally, you'll use either FTP or "Shared directory".  Refer to the documentation (the BODS SAP Supplement) for a description of all this.
    In all cases (or at least, quite certainly, using the FTP and Shared Directory methods), the ABAP extraction programs are directed to plop their output as flat files in the "Working directory on SAP server."  For testing, you can look in that folder to see if any flat files are appearing when you submit an ABAP data flow.  If not, then either 1) your ABAP program isn't getting in there (a Basis admin should be able to tell you), or 2) it's not running (ditto), or 3) it's running but unable to generate the output file (ditto), because a) SAP isn't permitted to write to that folder, or b) the folder doesn't exist (it needs to be defined from the perspective of the SAP server).
    If you do see files appear in the "Working directory on SAP server" when you run a BODS job w/ an ABAP dataflow, then the problem is that BODS can't fetch them.  If you're using the "Shared directory" method, which is suitable for and often used in all-Windows environments, then the account under which the Job Server in question is running must have access to the "Working directory on SAP server," but this time from the perspective of the Job Server.  So if, for instance, SAP was directed to put the flat files on a local folder, say, "E:\USR\SAP\BODS", then you might want to share this folder out as, for instance,
    sapdev1\bods (for an SAP host called "sapdev1"), and then enter "
    sapdev1\bods" in the "Application path to shared directory" field, in your SAP datastore configuration.  If your Job Server service is logging-in as "Local System," though, it won't be able to get there -- it needs to log-in as an AD domain account w/ rights to that share.  Get it?  Try logging in to your BODS job server computer with the AD "service account" setup for use by the Job Server service, and try to open a file on the "Application path to shared directory". If you can't, then BODS won't be able to get data from ECC, either.  FTP works similarly -- if you're using that and having trouble, please re-post.
    Best wishes,
    Jeff Prenevost
    Data Services Practice Manager
    itelligence

  • HT4314 What does the recent tab mean in the friends tab on Game Center?

    What does the recent tab in the friends tab of Game Center mean? Thank you

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups and all open tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • TS1702 I played HayDay on my iPhone until the app shut down very shortly after loading.  Then repeated that all on my iPad with same results, even though I am signing in through the Game Center.  Why doesn't the app stay open so I can play this enjoyable

    I played HayDay on my iPhone 4 to level 26-29 or so, then it didn't stay loaded when returning to play. Same scenario with iPad at level 26 even when signed in through Game Center.  Why does the game quit within a few seconds after loading?

    Never mind. I've did a hard reboot no matter how hard I pressed the power button. Thank goodness!!!

  • HT4314 When i set up my new iPad it didn't pick up the progress on some of my game center games is there a way to fix this

    When I set up my new iPad as a new product with iTunes it didn't pick up the progress of some of my game center games, Anyone know how to fix this?
    It also didn't load my photos either,
    Thanks in advance for any help.

    Firefox 4.0 on WinXP shows the Menu bar by default, the orange Firefox button appears when the Menu bar is hidden. Right-click the Menu bar and de-select the Menu bar item by clicking on it.

Maybe you are looking for

  • I had an older version of Firefox with a toolbar that allowed me to view multiple links at once. Is that toolbar avaiable for the current version of Firefox?

    When viewing an email with multiple links, I would click an icon in the toolbar which looked like a vertical multi-colored bar and all the links would open on the same page. I cannot find this (add-on) now that I have downloaded the current version o

  • Satellite M60-164 need AC Adapter

    I have a Satellite M60-164. I tried to purchase a replacement AC Adapter. I sent the part number to my supplier and they tell me that it is discontinued. Anyone know an equivalent compatible adapter for Satellite M60-164.......thanks in advance for y

  • Creating adobe forms in ABAP

    hi, I am new to adobe forms in ABAP.can anybody please tell me the pre-requisites for the set up and step by step procedure to create Adobe Forms in ABAP? Thanks, Parama.

  • Wont burn windows xp sp2 bootable cd

    I own windows xp sp 2 and wanted to burn a copy for safe storage. It copies the bootable cd rom about 80 percent and then does not complete. Is there a special way to burn bootable cds i.e. xp sp2?? Macbook Pro 17"   Mac OS X (10.4.6)  

  • FCP Studio & Snow leopard

    I have the original Final Cut Studio (Version 1.0.1) that I bought when I had a G5 powerpc iMac. I have since upgraded to an Intel iMac, and just installed Snow Leopard. Motion wouldn't launch at all, so I uninstalled the entire suite with FCS Remove