We have a web site with a valid Certificate, however Firefox is the only browser that issues a warning that certificate is invalid.

We have a valid certificate on our web site. However Firefox issues an error that the connection is untrusted. I have verified that the certificate is good using www.digicert.com/help. The other browsers, IE7,8,9, Google Chrome, and Safari have no issue with the site. Any input would be appreciated.

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Similar Messages

On some sites we get sec_error_unknown_issuer SSL error due to missing root certificate TC TrustCenter Class 2 L1 CA XI. Firefox is the only browser having this issue. Why is that certificate not preinstalled and shipped with Firefox?

On some sites we get sec_error_unknown_issuer SSL error due to missing root certificate TC TrustCenter Class 2 L1 CA XI. Firefox is the only browser having this issue. Why is that certificate not preinstalled and shipped with Firefox?
Check sales.sauer-danfoss.com for details with Firefox 7.
Thanks
Stefan

You are not sending the TC TrustCenter Class 2 L1 CA XI intermediate certificate
*http://sales.sauer-danfoss.com/
Web servers need to send all required intermediate certificates to build the chain to build-in root certificates.
You need to install that intermediate certificate on your server.
*http://www.trustcenter.de/en/infocenter/root_certificates.htm#3479
You can test the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/

When logging onto a web site with a log on name firefox is changing logon name from Kostas to kostas as the site is case sensitive it is not acceptable. how do I correct this? Thanks

I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
How can I correct this please
Probably no connection but
I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
Finally I had a phone call from a company called NERD-I.com
offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
Many thanks

Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert

Ever since I uploaded 7.0, I have lost web site addresses and I cannot back space from the page. What happened?

Ever since i uploaded 7.0, I have had problems with no web site addresses, I am unable to back space and I have to keep updating that I want my tabs on top NOT on the bottom. But what gives on the web site addresses missing and the no being able to back space?

Make sure that you do not run Firefox in Full Screen mode with all toolbars hidden.
* Press F11 to toggle full screen mode (Firefox/File > Full Screen)
If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* If items are missing then open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* If a missing item is in the toolbar palette then drag it back from the Customize window on the toolbar
* If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up.
See also:
* http://kb.mozillazine.org/Toolbar_customization
* https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

Designing websites -- what code do I need to add to allow a pop behind window to open from one of my webpages? I have code, but Firefox is the only browser that won't pop behind. It pops on top instead. That's not what I want.

I have designed websites, and would like a pop under (new window) to be displayed BEHIND the current/open window. I have code that does this on all browsers except firefox. For some reason, Firefox insists on opening up the new window on top of the active browser window session. It covers the entire page. Reason is because I purposely have a new full-size window opening BEHIND the open browser. Is there some code I can add to my web page script that forces the new window to open up BEHIND the active/open browser, specific to firefox?

this is support forum, if you need help about developing please use developer irc channel
* irc://moznet/developer
if you dont have irc, use mibbit
maybe they can help you :)
Good luck!

How do i save pointeers to opened web sites when closing down to reboot, sometimes a dialogue box asks this , sometimes it warns that to continue will loose the settings thanks?

simple question: when closing ff by clicking on the X upper rh corner sometimes diialogue box warns 'you are about to close tabs'.
other times it asks 'do you wish to save tabs'. Why is this? how do i save tabs when closing browser in order to reboot etc

Do you organise your email into separate folders, or do you just let it accumulate in the Inbox?
I would strongly advise you not to let it sit in the Inbox.
When you see this happening, try right-click on the affected folder, select '''Properties''' then '''Repair Folder'''.
Large folders (actually, a folder in Thunderbird is stored as a file, so it is sensitive to file size limits set by the underlying file system) can be problematic. This is one reason not to let messages collect in one folder. I use Thunderbird's Archive folders so that accumulated mails over several years can happily coexist because they are effectively stored in many small folders. No single mail store folder then exceeds the 2GB or 4GB sizes that have been known to stress the OS. I appreciate that current builds of Thunderbird and a modern 64-bit OS should be able to cope, but practically I find it slows down when given huge files, so I err towards a pragmatic solution; a large number of not very big files.
Archives are searchable, and a Saved Search folder can give you a virtual composite folder allowing access to the entire Archive.

Why ipad mini released with a non-retina display.. The only reason i didn't buy that..

I was so much after the ipad mini..
but released with the non-retina display and this put me down a lot and I didnt buy this one at all.
Now I am looking one but with a larger screen and where i can use that as a phone around 4.5" min.
Thanks

There are a few "phablets", small tablets that are also phones, but Apple does not make one. Thus far these "phablets" are not proving to be very popular, but if you think one would meet your needs, by all means look into them.
Regards.

Forward web site with e mail

Can anyone tell me how to forward a web site with verizon e mail without typing out the address, if I go to file, send, page by e mail is grayed out.

Triple click in the address bar (the http address) of the browser window with the site whose link you want to pass along is open. This should highlight the entire URL string. Select Edit -> Copy from the menu on the browser (or hold down the "Ctrl" key and press the letter "C"). Then in the mail window click on the spot where you want to insert the URL link in your message and select Edit -> Paste from that browser window or hold down the "Ctrl" key and hit the letter "V".

Problem when i publish my web site with muse

i have an erreur inconnu when i want to wruite my pass word
i had changed my adobe ID
it is reconise by BC

Yes i had restart Muse and my mac. I have no more message than a red hexagon with an exclamation point and the message : "erreur inconnue" no number nothing more.
Best regards
Le 8 mai 2014 à 16:24, Aishvarya Raj Rastogi <[email protected]> a écrit :
I can't publish my web site with Muse because of an "error inconnu . I have my ID Adobe and my pass word. But i have an error message " erreur inconnu" Business catalyst tell me that my ID and pass word are ok. so wath ?
created by Aishvarya Raj Rastogi in Help with using Adobe Muse CC - View the full discussion
Hi,
Have you tried restarting Muse and your computer? If not, please try it. If you still face the problem, please provide us the complete error message and we'll look into it.
Regards,
Aish
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6365165#6365165
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Unable to Access Web Site (with same name) outside of Local Network

Hi everyone,
I have my web site (and some other services) hosted outside of my network by my hosting provider, but handle all other items using OS X Server on my network (i.e. Wiki and so forth).
The problem is now that I am unable to access my website at www.mydomain.com from within the network. I have external DNS set up for www.mydomain.com to point to my website, while mydomain.com points to my OS X Server (static IP address). Internally in OS X Server's DNS settings this used to work when I had www.mydomain.com resolving to the IP address of my web host, in addition to the default domain settings that OS X had set up. For some reason this is no longer working, and I am unable to figure out why.
Using latest version of OS X Server 3.0.2.
Any help is greatly appreciated. Thanks!
Update: this ended up being a redirect issue on the web host. I added another subdomain that was hosted externally, and it worked fine. For some reason my web host is redirecting www.mydomain.com to domain.com.

I am in Texas and cannot get to that site either. Do you know for sure the site is up and working? It could just be down (for days, a site I support was down for almost 4 full days a few weeks ago due to a virus problem).
This may (again, may) be your problem: I see you have a173.48.x.x (you really should x-out the last two octets of your IP address for privacy reasons), I am on a 173.74.x.x address; I know some people have had problems with getting to some sites now that they have a 173.x.x.x address. I think Verizon obtained addresses in that range and some of the addresses apparently previously belonged to spammers or some malicious folks.Some sites (web sites, intermeidate routers, etc.) blocked those addresses, and may not have updated their filters to remove the block on those addresses because they don't know that Verizon now owns them. If this is the problem, eventually those filters will get updated and you will be able to access the site, but this could be a fairly long time.
If you know how to contact that site I suggest you email them about the problem. You can also try turning off your router overnight and when you turn it back on the next day you may find that you have a different address (one that doesn't start with 173) that will allow you to get to the site.
I don't think there is much Verizon can do to help, it is not their site that is blocking your address (at least I don't think it is).
Hope this helps.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.2, Build 08.58
Keller, TX 76248

Safari will not open certain web sites with https or http

safari will not open certain web sites with https or http,any help will be welcome,it must be a security setting,but i have not changed any settings.

From your Safari menu bar click Safari > Preferences then select the Exensions tab.
If there are any installed, switch the button to off, quit and relaunch Safari to test.
If there is more than one extension insalled, uninstall one a time, quit and relaunch Safari and test.

Multiple Web Sites with Personal Domain Names - Overview

I have read through the last 10 pages of these discussions and have almost worked this out, but I need some help.
Problem:
I want to publish and edit two separate web sites with their own, individual, personal web addresses
from the same user account on the same Mac using iWeb '08 (2.0.2) and my .Mac account
_So far:_
I have purchased and registered the two domain names (with Cheap-DomainRegistration.com)
I have configured the CNAME to point to web.mac.com, and "Set up a Personal Domain" in iWeb successfully, but using a separate Mac for each web site.
The two sites work great.
_What (I think) I need to know:_
(excuse me for copying these posts out, but I can't find a way to link them to this post)
1) Should I be using iWebSites as suggested by Old Toad (posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
2) Should I be using Mireille's approach (also posted Jan 24 in response to StAnNe's "Multiple Websites--HELP!!!")?
Yes you are correct in the thought that with a family pack you can use different accounts and that is the easiest way to upload with one click to .mac. But it is still possible to publish differents sites to one .mac account if that is all one has. Even if the sites are in one domain file each purchased mysite.com domain name purchased can be pointed to a different page in the site
Look at it this way
Original Poster has
site1 page 1 page 2 and so on
then he/she has brothersite page 1 and so on.
They each have a domain name purchase wherever
then site1domain.com is forwarded to site 1 page1
and brotherdomain.com is forwarded to brothersite page 1.
Even though both sites are in the same file they do not have anything to do with each other.
This is one possibility there are others but for a novice user this could be the way to go for simplicity.
(Mireille, if you're there, can you clarify what you said - thank you)
3) Would I use Roddy's fix (posted Jan 23 in response to canadensis' "Publishing Multiple Websites?")?
Here's an example of how you can separate two websites that are on the same domain file.
Quit iWeb
Create a new folder on your desktop and call it "iWeb Sites".
Inside this folder create two more - Website A, Website B.
Go to Home Folder/Library/Application Support/iWeb and copy your domain file - command C
Paste this into folders A and B - command V - and also paste a copy of it somewhere else - like in Docs - in case you make a mistake!
Double click the domain file in the folder Website A - this will launch iWeb.
In the left column, delete site B, save and quit iWeb.
Double click the domain file in the folder Website B to launch iWeb.
Delete website A, save and quit.
Drop the iWeb sites folder into your Home Folder.
If you want quick access to this folder you can highlight it and do command L to create an alias to leave on the desktop.
From now on, to launch any site in iWeb you open its folder in the iWebsites folder and double click the domain file.
This is not necessary when you are working on only one site as iWeb saves the domain file of the last site you were working on to Home Folder/Library/Application Support/iWeb. When you open the iWeb application, the last site you worked on will be launched.
Summary:
I'm not sure if some of the answers in previous discussions allow for personal domain names, which is what I need.
I would be very grateful for any suggestions as I'm getting bogged down.
Many Thanks,
Jeff

When you said, "you don't need to do CNAME for both sites…", would this method still allow me to use personal web addresses for both sites?
Yes. With "Ordinary Forwarding" you normally just type your .Mac url (web.mac.com/username/sitename) into a form at the place where you have your name.
I thought I was using 'web.mac.com' as the 'www' CNAME (alias) for my personal domain name (web address), so that when someone typed in my personal domain name they would 'go' to the domain registration location, which would then pass it on to the .Mac server, where my web site is hosted.
That's exactly right. It's just not the only way to do that. Ordinary Forwarding is another way, but it differs in terms of what appears in the address bar of the browser. Either you will see web.mac.com/username/.... or, if you add "masking", you will see your personal name for all pages. The CNAME method results in a address bar that reads www.myname.com/sitename/pagename.html.
Am I way off?
All help gratefully received,
Jeff

How to publish custom web site with own domain name?

Hey out there. I wonder if anyone can give me any tips on how to publish a web site with my own domain name.
I have a web site I'm building and I want to purchase a domain name and then publish the site using that domain name.
I know how to buy a domain name. I have a .mac account so I'm hoping that .mac can host the site. What I don't quite understand how to do is get .mac to host the site using that domain name. I looked through Apple Support but couldn't find what I was looking for. Just wondering if anyone has been in this situation. Thanks in advance.
Dave
[email protected]

Dave ~ Welcome to the discussions. .Mac was re-branded as MobileMe last July. If you're not building your site with iWeb, it's considered to be a "custom" website. These Apple docs may help:
MobileMe: How to publish a custom website
iWeb ’08: Using your own domain name
...Use this search page to find such documents:
http://support.apple.com/kb/index?page=search
Note that you don't need to have iLife '08 to be able to direct your domain name to your custom website published to MobileMe. As someone wrote on another thread:
"My personal domain is linked to my MM but i don't even have ilife on my mac. When you go to the options in MM to link your personal domain to your MM it provides directions that will guide you with setting up your godaddy settings."
...Where "MM" is MobileMe here:
http://me.com/account
...+Personal Domain+ tab, and "godaddy" is wherever your domain name is registered.

Update web site with changes

I just made changes to our menu (created in fireworks) How do
I update my web site with the new menu? (please do not flame me for
stupidity :-) )

Your .png has the same buttons at the Web site, what is it
you changed?
I looked at the code and...I'm sorry to tell you this, but
it's a mess. From line 7 through line 787, comment tags are opened
but not closed. 780 lines of improperly coded nothing? Some
standard Dreamweaver code is commented out from 788 to 847, and
again at 1747 after a few more hundred lines of open-but-not-closed
comment tags and blank lines, and again at 3579.... After each
block of commented out code is some kind of menu stuff, but
probably only the last block is functional. Looks like there's some
external JavaScript code for your menus from 2002.
For divs, ids should be defined only once, but id LAYER2 is
defined twice (lines 3787 and 4021), id LAYER4 is defined 3 times
(lines 3803, 4032, and 4035), and id LAYER6 is defined twice (lines
4019 and 4030).
Have you tried viewing the site in Firefox? In 2.0, I get the
buttons and the footer and that's it. No header, no Flash elements,
and no background behind the buttons. Hmm. I wonder if it's because
the flash is in an embed tag rather than an object tag? I don't use
Flash, so someone else will have to help you with that. In IE7,
even though I know there are some other menu links somewhere
(Admissions, Curriculum, Student Activities, Faculty and Staff,
Counseling, Cafeteria, Safety Pledge, Directions) I can't get them
to display. Perhaps that 5-year-old JavaScript code is not
compatible with current browsers.
If I were you, I'd take this step-by-step, dissect what this
page is
supposed to do, and rebuild it from scratch in a way that
will work with current browsers. This one doesn't. I know that
sounds like a lot of work, but I think it would be
more work to straighten out
this page.
Good luck!

Web site with Java Scripts ( on iphone4)

try to open a web site with Java scripts , but it just show empty on the scripts section , anyone can help ? (on iphone 4 with iOS 4.1)

Hi, welcome to Apple Discussions.
Web pages that make use of Javascript should work just fine. Those that have embedded Java applications won't. Java & Javascript are two different animals despite the similarity in the names. Like Flash, Java is not supported on iOS.
tt2

We have a web site with a valid Certificate, however Firefox is the only browser that issues a warning that certificate is invalid.

Similar Messages

Maybe you are looking for