We have black ink coming out of the right side of the feeder tray.

Our C7280 is copying OK but black ink is coming out on the bottom feeder tray. How can I take out the whole tray assembly to clean it and where would the ink be coming from?

I'm also having this problem even thought it worked perfectly well before
it's only been two months since i got it
i don't have any warranty though and i didn't buy it in the apple store
do you think the apple store might take it in and fix it?
if anyone has any suggestions can you please email me at [email protected]

Similar Messages

  • Black bar along the right side and the bottom of the screen- DV5-1007ca

    I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!

    I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting  soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.

  • My iPad has  a series of thin black lines running across the right side of the screen.  They look like pages in a book.

    How does one get rid of the thin black lines running across the right side of the screen?  They look like the edges of pages.....  This is an iPad3 and the lines have been there since I took the iPad out of the box.

    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is suggested...
    Be sure to make an appointment first...

  • MY IPHONE SCREEN HAS GONE SEPIA. The RIGHT SIDE OF THE SCREEN IS BLACK!

    Hello, my iPhone screen has turned sepia. No one say 'click the home button 3 times' or 'turn white on black off' because I have tried them!
    Basically on the right side of the screen there is a black part. About a quarter of the screen it fills.
    It is sepia too. It is really hard to see things. Also, say if i am on the home screen, then i open settings; the home screen would be in the background!!
    HELP!
    Here is a picture

    For an out-of-warranty replacement phone:
    149.00 USD
    =
    94.6872 GBP

  • I just jazzed up my 2 Ghz iMac with 10.6.8, and 4 gigs of memory. I'm VERY happy with the results (fast!), but now I have a thin yellow line way over on the right side of the screen, which goes from top to bottom. This is really strange! Any input?

    I'm VERY happy with the results (fast!). However, the really strange thing is this - there is now a thin yellow line, way over on the right side of the screen, which goes from top to bottom, and stays there no matter where I go or what I do. I've never seen anything like this! It was not there before I did the upgrades. Anyone out there ever heard of such a preposterous thing ~ or have any ideas on how to get rid of it?

    Hello Mark,
    It's going to mean a lot of reading but you should study the 'More like this' legend to your post's immediate right.  >>>>>>>>   plus some of the links within each.
    The problem is well explored with much guidance on what to do and where to go.

  • I have 9 tabs, but when I try to make a tab group, only the current page shows up as a thumbnail, not all the tabs. I can't get them to work for me. All the tabs are listed on the right side of the tab groups box. What am I doing wrong?

    There's no thumbnails to drag around except one on the left side of the page (the one that's open). The right side of the page lists every tab I have created.

    Perhaps your problem is that '''you must save your browsing history''' in order to use app-tabs that would apply to groups as well but I did not test.
    * http://img232.imageshack.us/img232/4928/clearcachew.png
    I would suggest that if you do not save that stuff in bookmarks, that you will probably have a serious problem soon and lose your tabs, so if you count on them you could lose them. They should stand up to repeated restarts but I would not count of them as app-tabs myself, for one thing it is new, the other is I have to frequently wipe them out and restart, because I actively open new content into them and go back to the beginning of the tab history, and sometimes I can't, and sometimes I lose them by accidentally closing them -- and I must be able to close them in all manners that I close other tabs or I wouldn't be using them.
    There are people who keep 200 tabs open through restarting, that is not for me, I try to clear out the tabs frequently.
    That is what app-tabs are for as opposed to home pages, but I did have a problem when I tested with 120 since as app-tabs only about 65 can be seen at once even though I did reduce the width of app-tabs to about 2/3 the size that they were.. Problem I had when I restarted was that the window enlarged a bit beyond the screen, and my tab counter disappeared until I reduced the count to about 65. I do not allow tabs to scroll so you probably wouldn't have that problem.
    I forgot to test home page with 60 tabs. I do have something set to 75 though have to check that. I tested with 60 pages as home page. Brought firefox down and backup with the 1 app-tab and 60 home pages the app-tab is the same size as the 60 normal tabs from home page.
    Never used group-tabs by choice, since they messed me up I stay clear of them, I don't like them or anything large panoramic type of large thumbnails.

  • How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
    David Miller
    [email protected]

  • My Iphone 5 home button  keeps pressing itself but stops if put pressure on the bottom of the screen on each side of the home button, i have noticed that there is a screw missing on the right side of the lightning port could this be the issue?

    My Iphone 5 home button  keeps pressing itself but stops if put pressure on the bottom of the screen on each side of the home button, i have noticed that there is a screw missing on the right side of the lightning port could this be the issue??

    If you are still under warranty, contact Apple to get it serviced. You can also visit an Apple Store or Authorized Apple Service Provider to get it looked at.
    iPhone - Contact Support - Apple Support

  • [Solved] On fullscreen flash videos (like on YouTube) there is a black bar on the right side of the screen, and I must click slightly to the right of onscreen buttons instead of directly on them while this is happening.

    On fullscreen flash videos (like on YouTube) there is a black bar on the right side of the screen, and I must click slightly to the right of onscreen buttons instead of directly on them while this is happening. It's like I should click where they should be, not where they are. The exact same problem happens on Google Chrome, but not on Internet Explorer. It also happens on some games I installed like, "Crysis".

    Nevermind, I solved the problem by downloading this:
    http://www2.ati.com/DriVeRs/mobile/11-6_mobility_vista_win7_64_dd_ccc_ocl.exe

  • Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Bad video card, call Apple, get a case number and return it.

  • HT1171 I have the apple wireless key board.  There is only one delete key and it deletes all data to the  left side of the cursor.  Where is the delete function for deleting letters that are on the RIGHT side of the cursor?

    I have a new wireless apple keyboard. I can only delete items that are to the left of the cursor using the delete key.  What key do I use to delete items that are to the right side of the cursor?  I have only one delete key.
    My old apple wired keyboard has 2 delete keys that enabled me to easly delete data on either side of the cursor.
    Thanks

    Fn + Delete

  • On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

    On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

    I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!

  • Why is MBP 2010 15" have a virbrating feeling on the right side of the trackpad? Please advise.

    I've really never noticed this, but lately I've been feeling a vibrating feeling when I rest my palm on the right side of the computer while working. It's not really a issue, the computer still works fine. I guess I just have a sensitive hand. On my old 2007 MBP, I never felt a vibration on the right ride. It sounds like it's the hard drive.
    Please let me know your thoughts!!!
    Thanks

    I have a 17" MBP and the HDDs are on the left side of those models.  The vibration that I feel on my MBP is barely perceptible.  It may be that the brand of HDD may be a factor, or the individual HDD itself.
    If you are concerned about this, a trip to the Apple store genius bar may be a good option.  The diagnosis will be free and you will then know for certain if you do or do not have a problem.
    Ciao.

  • How can I reduce the display width of Firefox: I have my monitor in portriat mode, and the right side of the screen does not display.

    How can I reduce the size of the Firefox monitor display?
    I use my monitor in portrait mode, and the right side of the Firefox window is not displayed.

    Try using this extension. <br />
    https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

  • 1px line created on the right side of the browser

    Hi All,
    I want to have a banner image, which fades into blackness so i have made the image smaller to fade into a black solid background. I have simply placed this behind the background image.
    When adding either a rectangle with a fill image or a solid black image to my banner, it is somehow creating a 1 pixel thin white line on the right of the browser. It's as if there is an element which is larger than my width (1400px including the 100px for left and 100px for right margins). It is also creating a horizontal scroll bar.
    Once i delete this rectangular fill/solid colour fill, i no longer have a horizontal scroll bar or a 1px thin line on the right.
    I have double checked every single element of the page that it does not exceed the canvas size and it touches the edges to create the red lines that it is 100% full browser width. I have checked the master etc.. everything seems to be fine and the correct 1400px width.
    Can anyone assist with what could potentially be causing this? I have attached some screenshots if you need any.
    PLEASE NOTE! This is only an issue with GOOGLE CHROME for desktop and on any browser for tablets (haven't tested on mobile yet as i have not optimised my site for mobile).
    I've tried this is Safari and it has no horizontal scroll bar or an issue with the 1px thin line on the right side of the browser.
    This is killing me because i can't find out what it is!

    Hi All,
    Anyone have any ideas?!

Maybe you are looking for