We have plan to windows 2008 server ECC5(is reatil) oracle 10G.

Dear all
Presently we are using winwos 2003 server enter prize edition ,ECC5(is
retails), oracle 9.2.0.7.
we have plan to windows 2008 server ECC5(is reatil) oracle 10G.
Is windows 2008 suported to the ECC5 (is-Reatail) and oracle 10G .
if supported please advise windows 2003 server is better or windos 2008 server  better .
Thanks
Edited by: Venkat Ramesh on Aug 18, 2008 9:47 AM

ECC 5 is based on kernel 6.40 which is not (yet) released for Windows 2008.
See also note 1054740 - SAP System Installation on Windows Server 2008
I would recommend installing on Windows 2003 and later upgrade your system to Windows 2008 when kernel 6.40 is available.
Markus

Similar Messages

  • 32bit client on windows 2003 server R2 64bit running oracle 10g release 2

    Hello,
    could you please help me ?
    I have a windows 2003 r2 sp2 64 bit server on witch oracle 10g release 2 64 bit is installed.
    So far no issue.
    I need to have a 32bit client installed on the same server to be able to run some applications on the server, but my applications won't start telling me that TNS could not resolve the connect identifier specified.
    my tnsnames.ora seem correct both in the db_1\network\admin directory and in client_1db_1\network\admin directory.
    both Sqlplus(client_1 10.2.0.1 and db_1 10.2.0.3) return a connection.
    I don't know where the problem could be coming from
    Thanks a lot
    Fred

    897790 wrote:
    Hello,
    could you please help me ?
    I have a windows 2003 r2 sp2 64 bit server on witch oracle 10g release 2 64 bit is installed.
    So far no issue.
    I need to have a 32bit client installed on the same server to be able to run some applications on the server, but my applications won't start telling me that TNS could not resolve the connect identifier specified.
    my tnsnames.ora seem correct both in the db_1\network\admin directory and in client_1db_1\network\admin directory.
    both Sqlplus(client_1 10.2.0.1 and db_1 10.2.0.3) return a connection.
    I don't know where the problem could be coming from
    Thanks a lot
    Fred
    THANKS! for NOT supplying actual error code & message
    ORA-12154?
    I don't know what you have.
    I don't know what you do.
    I don't know what you see.
    It is really, Really, REALLY difficult to fix a problem that can not be seen.
    use COPY & PASTE so we can see what you do & how Oracle responds.

  • Install Oracle 10g on windows 2008 Server 64bit

    Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
    windows server 2008 Oracle 10G 64 bit
    before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
    "OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
    O/S-Error: (OS 1) Incorrect function. ! "
    if it is possible which version I want to download is best ..
    and what is the recommendation whether it is 10g or 11g

    You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
    Furthermore like Aman told you, It's more recommended install 11gR2 version
    Edited by: Fran on 29-may-2012 4:20

  • Windows 2008 Server R2 & SAP Business One

    Does anyone have any experience, good or bad, with SAP Business One and Terminal Service on Windows 2008 Server R2?  We are finding a number of issues with this configuration and we are looking for any feedback that is out there.
    Here is the situation - our customer is running SAP Business One v2007 SP01 PL09 Hotfix4 on a Windows 2008 Server R2 machine.  All users (15 max) access SBO via Terminal Service to this machine, which also holds the databases (SQL Server 2005).  The machine currently has 20GB of RAM.
    What we are finding is:
    1) When any process related to SBO (SBO core or add-ons) consumes some portion of memory, none of that memory is ever released back to the O/S until SBO is completely closed.  So over the course of a day each user ends up simply consuming more and more memory as forms are opened for transactions.  While we do see this in Windows 2003 Server to some extent, at least some memory is released when a given form is closed.
    2) Once the system hits a point where around 75% of RAM is consumed the users start seeing application "hangs" and are forced to manually terminate SBO (via Task Manager) and restart.  There doesn't seem to be any paging or use of virtual memory (if my terms are right) in use.
    3) If the system is busy and a new window/form is opened the new window immediately (within one or two seconds) presents the "Not Responding" message on the new window.  Depending on the circumstances the application is simply waiting for resources and will continue opening normally.
    I would appreciate feedback from anyone who has experience with Windows 2008 Server R2; and especially using it for Terminal Services.  My personal feeling is that it is a platform that should be avoided but we would certainly like to hear what other folks have to say.
    Regards,
    Ross Unger
    Third Wave Business Systems

    I believe the supporting of this OS is still on Planned basis.  You may check with SAP support to give them a good user case to fight with any non-compatible issues.
    Thanks,
    Gordon

  • Possible to run Discoverer 9i on Windows 2008 server

    Hello,
    We have Oracle Discovere 9i currently running on a windows 2000 server against a oracle 9 database. The server is due to be upgraded to windows 2008 server - is it possible to install and run discoverer 9i on the new windows 2008 server - is there a compatibility mode ?
    Many thanks,
    Lawrence

    I don't know if CE holds a full blown version of a JVM required to run forms....we don't have any certification plans currently for CE.
    Regards
    Grant Ronald
    Forms Product Management

  • How to install a plugin on 64 bits windows 2008 server?

    From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

    Hi Everyone,
    I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
    "Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
    Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
    Awaiting your response.
    Farid

    Hi ,
    LMS 3.2 is not supported on Windows 2008 Server Standard R2.
    here is the supported platoform for LMS 3.2
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
    Thanks,
    Gaganjeet

  • Error connecting to the SAP SRV on Windows 2008 Server platform

    Hi All
    We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
    When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
    We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
    After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
    *Connection failed:
    SQLState:'08001'
    SQl Server error:10060
    [Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
    Connectioin failed:
    SQLState:'HYT00'
    SQL Server Error:0
    [Microsoft][SQL Native Client]Login timeout expired
    Connection failed:
    SQLState:'08001'
    SQL Server Error: 10060
    [Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
    Please help as most user who need access can't login and they are the main users.
    rgds,
    Bongani Dlamini

    Hi Eric,
    yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
    we tried to create the key but it says access is denied.
    Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
    We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
    I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
    Thanks & Regards,
    Prabhu Reddy.

  • Bank Statement management in SAP B1 on a VMWare Windows 2008 server

    Hi everybody,
    One of our customer is using a VMWare Windows 2008 server with SAP B1.
    Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
    Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
    Everything including bank statements transfer was working very fine on a "real" server before new implementation.
    When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
    "JAVA Virtual Machine Launcher : could not find the main class : program will exit."
    JAVA is well installed on the VMWare server.
    We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
    Does anybody already have this problem with Integration Platfom on VMWare server ?
    Is there a solution to our problem ?
    Thanks for all your contributions.
    Best regards.
    Michel

    Hi Michel,
    First of all, your PL is too low.  AFAIK, the first supported PL for 2007A SP00 is PL30.  You may upgrade your PL first to see if that is a bug or not.
    Thanks,
    Gordon

  • Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

    I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server.  I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers.  Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer.  I have even tried the generic 32 bit PS and it says the same thing.  Any ideas on what I am doing incorrectly or where to get the drivers that I need?
    Thanks,
    Gary

    Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

  • Cant add a printer in Windows 2008 Server printer server HP LaserJet P1606dn

    Hello,
    I am trying to install a HP LaserJet P1606dn printer in a Windows 2008 Server Virtual machine.
    The printer is connected to the corporate network and I am able to do ping from my desktop to the printer.
    Then I follow this steps.
    1.- Install the driver application for W2008 Server.
    2.- Add printer in W2008 Printer Server.
    3.-Select "add a local or network printer" as an administrator.
    4.- Choose network printer
    5.-Create a new port --> Standard TCP/IP Port
    6.- Fill the host name ---> ("printer1") or IP address --> (XX.XXX.XX.13)  I have tried the both options separately but with no result. And fill the port name
    7.-At this stage . W2008 Server tells me that " the device is not found on the network" . Be sure that: .....
     So, in select device type, I select  "Standard" and "Generic Network Card"  and click on Next
    8.- Install printer driver  -> I select the proper driver HP LaserJet 1606dn
    9.- Install the printer driver ---> use the driver that is currently installed (recommend)
    10.- Type printer name --> "printer1"
    11.-Share printer name ---> "printer1"
    Here, begins the problem. Trying to print a test page, It says me that  "A test page has been sent to your printer", I can see the document in the queue, but the printer page it isn`t thrown away outside.
    I dont explain myself why, I have done several trials, and I dont know what happens
    I would be very grateful if somebody could help me to solve this issue
    Many Thanks
    Robert

    Hi lespaul80,
     1st- check if you can connect to your printer on web interface(in IE: \\printer ip address
    and check under network setup  if subnet mask and  def. gateway setup
    also if you have DNS setup check it too
    check if you have SNMP options - desable it
    on server try ad printer by direct IP and try use upd drive(PCL6 or PS)
    Hope it help you
    Regards,
    I am an HP employee.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.*

  • Windows 2008 Server R2 64 bit what version of server applications?

    Hi, I'm new here please let me know what version of the OAS [Oracle Applikation Server] is required for the server running Windows 2008 Server R2 64 bit? Server wants to use the forms. I will be grateful for links to the version.
    I greet.

    Hi,
    As far as I can see OAS is not supported on Windows 2008 R2. You can have a look here:
    http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
    10gR3 - http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-r3-10-131499.xls
    10gR2 - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
    Regards Peter Lorenzen

  • Windows 2008 Server RC 2(64bit) ,Crystal Reports11.5 Compatbility Resolve?

    Our company is moving to Windows 2008 Server RC2 64bit OS platform to run our reports. Will Crystal Reports 11.5 run on this OS platform? Right now it does not. Is there a resolution?

    Actually it is supported, but because CR is a 32 bit app everything on the server must also be running in 32 bit modes. Other issue is CR XI R2 is past it's patch life cycle so if there are any issues we can't fix them. CR 2008 SP 3 should work fine as well as CR XI R2 SP 6, which does have Windows 7 support which is the same as Windows 2008 Server.
    Check the link out for more info on what is and how to.
    What is the actual problem you are having?
    Thank you
    Don

  • Windows 2008 Server crashed - How to find location of remote shared files that they used to access on remote web app?

    We have a client that was running windows 2008 server.  A previous IT person had setup their system, so we were walking into a situation where there were many unknowns.  Server was mainly handling emails only, and we were able to get their exchange
    database off and export PSTs to hosted exchange via microsoft.
    Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described.  He would go to the following url:
    https://mail.theirdomain.com/remote/menu.aspx#
    and he would use his login and then he would see several links to folders.  He could then click on those and see his desired files.  
    We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.  
    We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server.  As I am still learning and my boss wanted me to research this on my own and figure out how to find
    out where these files are located.  Any advice would be greatly appreciated.  
    Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work.  Is there any way in the IIS 7 management console to figure out where this was pointing to?  

    I figured it out - The server was using sharepoint to host these files.  I browsed localhost:987 and opened the sharepoint site locally on the server.  They had several documents to be exported, however when clicking on Open in Explorer it was
    giving an error that local client was not configured.  I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off.  

  • Windows 2008 Server R2 - Service Pack 1 Failed to install

    A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64.  The update failed to install after 3 attempts using the Windows Update manager.  After the third time I checked the system properties which states that SP1 is
    installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully. 
    In update history it shows the 3 failed attempts with no successes.  This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
    to see if this corrects my issue.  By the way what triggered the install of SP1 is random reboots of my server.  This is that unknown Kernal Power Error which I have yet to resolve.  Some months my server randomly reboots one time and other
    months 4-5x.  That is neither here nor there, the point of this discussion is to resolve SP1. 
    I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates.  So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
    When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update     
    An error has occurred. Not all of the updates were successfully uninstalled.
    When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer        
    Installer encountered an error: 0x80073712       The component store has been corrupted.
    Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
    I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
    exact same results.
    It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation.  Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
    short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
    If anyone has any suggestions please chime in and let me know what I can try.  Thanks for all the support and hopefully this post will help others in the future.

    Maybe a little bit late, but I was running almost same problem on a exchange server.
    Scenario:
    First attempt to Update the windows patches - excluded the patches from the last 2 months.
    I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
    So the C:\ partition had less then 5 GB free disk space, and I started the updates.
    All went well until Windows SP1 begun running to downloading and installing.
    When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
    Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
    I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
    Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
    What was the trick:
    1) Stop the windows Update Service
    2) C:\Windows\SoftwareDistribution\DataStore - Delete content
    3) C:\Windows\SoftwareDistribution\Download - Delete content
    4) Windows update Service check if its runs again
    5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
    It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
    I tought it will be hopefull for others to respond to this article with a solution.
    Kind regards,
    Alexander Tjintjelaar
    Micky soft noob

Maybe you are looking for