We have recently upgraded to 7.0.1. - Quick help needed
We have recently upgraded to 7.0.1.
We have a problem after upgradation.
Issue is : When user clicks on the portal favourites, his left side navigation is disappearing.
Can someone suggest me the solution.
Appreciate quick response.
Hi,
Please check SAP Note: 1402146
Regrads
Deb
Similar Messages
-
Elements will not allow me to NOT launch the organiser. I have recently upgraded to Win7??
Photoshop Elements 5.0 will not download photos into folders on our hard drive (only individually). It also does not give the option to NOT launch the photo organiser. I have recently upgraded to Win7. Can anyone help?
Download and install the PSE 5.0.2 patch.
-
i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have also tried 4 different chargers both official apple and non officiali have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means
-
I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?
The sound seems very faint but can here static on playback.
-
I have recently upgraded to OSX 10.8.2 and now find that I cannot operate my scanner, an hp psc 1310 series printer/scanner. I get a message saying that Power PC is no longer supported. I am still able to print on the same device. What should I do?
Hi,
PSC 1315 no longer supported for scanning since Mac OS X v10.5 or while using any newer OS, there is no scan software provided by either HP or Apple (Image Capture)
You may find this information stated below for Leopard, the same apply for any newer OS version:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01234231&cc=us&dlc=en&lc=en &os=219&product=374568&sw_lang=
Image capture will not recognize your device as well, only print is supported as you may find listed for teh PSC 1310 Series below:
http://support.apple.com/kb/HT3669#HP
Although there is no official scanning support for your device you may still try the 3rd party VueScan software which list your scanner as supported and compatible with Mountain Lion:
http://www.hamrick.com/vuescan/hp_psc_1310.html
Shlomi -
I have recently upgraded my laptop operating system from Vista to Windows 7. i tunes is asking me to sync my i pod, because it is recognising the Vista laptop and not the Windows 7. All my music has gone from i tunes library but it is all stored in Windows music folder(s). How can I move it all to my i tunes library?
So your iTunes library is now empty after the upgrade?
Simply drag the one folder (containing all of your music) into your new empty iTunes library or choose File -> Add to Library in iTunes.
Otherwise, if they aren't all in one folder, you'll have to drag each seperate one into iTunes.
B-rock -
I have recently upgraded my iBookG4 from Tiger to Leopard 10.5.8 and find my Bluetooth USB adaptor no longer connects. The Bluetooth pane says inactive. Does Leopard require USB 2.0. I've had the adaptor for some time so may be USB 1.0
Bluetooth icon on menu bar shows bluetooth off. When opening bluetooth preferences it shows the devices I've connected previously,( my mobile phone), and other devices I've attempted to connect but not very successfully: my iPhone and MiniMac. The bluetooth dongle in the USB port shows a continual blue light but does not react and the iBook does not recognise that it is there. There is absolutely no reaction when I try to pair my mobile phone, which I've done successfully before upgrading to Leopard, either by the iBook or the mobile phone.
I assumed that Tiger was not bluetooth compatible with the iPhone or MacMini running SnowLeopard and hoped by upgrading to Leopard I could achieve some file transfers between the three devices (iBook, iPhone and MacMini) -
I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question.
Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
~Lyssa -
I have recently upgraded my iMac to 10.6.8 and now find that the upload photo to Facebook facility no longer works. I have reset Safari but this has not resolved the issue - any suggestions? I can click on the "upload photos/video" field and it takes me to Finder to select the photo - but on selecting the photo, the Finder screen disappears as normal but from then on nothing happens.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now empty the Safari cache.
Back to the menu bar, click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari then try Facebook.
If that doesn't help, it may be a Safari extension preventing you from uploading content to Facebook.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
Hi, I have recently upgraded from and Iphone 4 to 5. I completed a back up on my iphone 4 via icloud which went ok. When setting up my new phone I selected to set up as a new phone and not via icloud back up. Is there anyway I can restore my details to my new phone? Thanks Hayley
Welcome to the Apple Community.
Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from. -
I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck
Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,
-
i have recently upgraded my my iphone 3gs to ios 5.0.1 and now my computer doesnt recognise it as a camera. is there any way i can access my photos stored on my phone from my computer? i also dont have wifi so i cant use the icloud option.
Hi Amy,
I have exactly the same problem. Before the update to 5.0.1 whenever I connected my 3GS to my MacBook Image Capture used to open. Now nothing happens. When I opened Image Capture or iPhoto, either program recognized my device as the iPhone, but no pictures showed up on the screen.
I emailed the photo's from the iPhone to myself and that worked OK.
Have no idea why the computer doesn't recognize the iPhone as a camera anymore.
You haven't had any answers on your question, so no solution yet.
Hope someone can help us. -
I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.
I have recently upgraded to iPhone 5 from 4, call line identity doesn't work when call other iPhones. It works when calling any other brand of cell phone. Network carrier assures me problem is not on there side. Any assistance will be appreciated.
-
I have recently upgraded to Yosemite and when trying to launch PS I get an error message 150:30. Can anyone help me out with this please?
Yes. The upgrade broke your CS4 install. You have to reinstall.
Easiest way to fix this is to download the installer Download CS4 products and have your serial number at the ready.
Then you will need to download and install the updates for Photoshop, Camera Raw, and Bridge here: Product updates
There is a Terminal fix, but you have to be familiar with Terminal and running the python license Repair script. You will need the bash shell on your user account. If that makes sense to you, we can try that.
Gene -
I have recently upgrades to Mountain Lion and I can not get the calendar utility to come alive. Icon appears in the tast bar but the application does not launch or appear to be any where else. Any suggestion?
Did you look in the Applications folder for Calendar? If it is there, remove the item that is in the Dock and replace it by dragging the Calendar application to the Dock.
If it is not there, did you have iCal located somewhere other than the Applications folder when you upgraded?
Maybe you are looking for
-
My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?
-
Pop ups are blocked even after i turn pop up blocker off on my desktop version and sync
how do i turn off pop up blocker on firefox on my xoom?
-
Operation status 'Fixed' in Production order
Hello all, We are facing an issue with Operation Status 'Fixed'. If we go to transaction /sapapo/rrp3 and double click on Production Order (R). Then clcik on Operation , say 0100, at right side you will see multiple Operation status. One of them is
-
PO not synchronized from backend
Hi experts, when a shopping cart is transfered to the backend system a purchase requisition is created, then a purchase order is created manually with reference to the purchase requisition. But the purchase order is not shown in the shopping cart fol
-
HI Can anybody plz send the T.codes of Project wise profit & loss accounts.