We have some data loads from ODS to Cube (Deltas)
Dear Experts,
We can see request status green in DSO but in cube it is in yellow and not available for reporting (the request got compressed)
I want to make the status to green and available for reporting but i could'nt do it as i can see some popup message saying the request is already activated and change QM status not possible.
when i run the delta again that also becomes yellow status due to the previous request's was in yello status.
please suggest me how to change the status of compressed request and why it is happening.
Thank you in advance,
Kiran.
Hi,
Chk whether automatic request processing--->Set quality status Ok checked or not?
It might be in manage of cube, in the menu-->goto options somewhere
as I was not before the system ...I couln't guide u exactly...
rgds,
Edited by: Krishna Rao on Mar 30, 2010 3:47 PM
Similar Messages
-
Hi All,
I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
Regards,
Komik ShahHi,
Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
1) get delta only once
2) get data by request.
If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
Generally both should be unchecked but can vary as per requirements.
Now for your new DTP, i dont think it will aloow you to change to FULL.
If its allowing you to select FULL, then select it and select from acive table.
try to load and see.
regds,
Shashank -
Hi,
i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
spHi Srinivas,
check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
Do a Init load and then do the delta load.
hope this will help. -
No data loaded from ODS to Cube
Hi,
I am trying to do init with data transfer from 0FIAP_O03 to 0FIAP_C03...
though there is data in the ODS, nothing is loaded to the cube. It just says
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Any suggestions?
Thanks
ShaliniHi
"Info IDoc received with status 8" implies that there is no data in the source.
But as you say, that data is there in the source(ODS), then there is some inconsistency in the data source and you need to replicate the data source and reactivate that.
IDoc Status 8 signifies that there is no data in the source and its not any error.
For more info on idocs check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
Also goto sm58 and clear the idoc there.
Hope this helps
Regards
Shilpa -
Summing up key figure in Cube - data load from ODS
Hello Gurus,
I am doing a data load from ODS to cube.
The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
I am loading only header field data ( and not the item-field data) from ODS to Cube.
I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
Can anyone please explain how to achieve it.
I promise to reward points.
=====
Example to elaborate my point.
In ODS
Header-field item-field quantity
123 301 10
123 302 20
123 303 30
Expected record in Cube
Header-field Quantity
123 60
====================
Regards,
Pramod.Hello Oscar and Paolo.
Thanks for the reply. I am using BW 7.0
Paolo suggested:
>>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
I did that still I get 3 records in cube.
Oscar Suggested:
>>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
There are other dimensions in the cube - which corresponds to the field(s) in ODS.
But, I just mentioned these two (i.e. header and item-level) for simplicity.
Can you please help?
Thank you.
Pramod. -
Error when loading from ODS to Cube
Hello Friends,
I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
07/03/2007 13:10:25 Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
07/03/2007 13:28:42 Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed
I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
Thanks.Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
A few questions:
How are you loading ur cube?
Did the data get thru fine to PSA with the infopack in question?
How did you load ur DSO(assuming the load was successful)?
Message was edited by:
voodi -
Loading from ODS to Cube in process chain
Hi Experts,
How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
Thanks,
BillHi,
You can use a DTP for this.
Create transformation between DSO and cube.
Create DTP and run it.
Loading data from one cube to another cube.
Cube to cube data loading
how to upload data from cube to cube
Can we pull data from one cube to another cube
Data Load Steps:
Reading data from another cube
Hope this helps.
Thanks,
JituK -
Can I do Parallel Full loads from ODS to Cube.
Hai,
Usually I will do one a full update load from OD'S to Cube. to speed up the process can I do parallel Full update loads from ods to Cube?
Please advise.
Thanks, Vijay,Assuming that the only connection we are talking about is between a single ODS and a single Cube.
I think the only time you could speed anything up is in full drop an reload scenario. You could create multiple InfoPackages based on selection and execute them simultaneously.
If the update is a delta there is really no way to do it.
How many records are we talking about? Is there logic in the update rule? -
Index for loads from ODS To Cube
The load from ODS to cube is taking a long time - In the start routine another ODS is being looked up - The keys for look up is say X and Y
There is already an index existing on keys X , Y & Z -
Will this index be used while doing the select on that ODS or I need to create a new index with only X and Y keys ?
ThnxWhen you are running the start routine - run an SQL trace - ST05 - that will tell you if the index is being used.
Arun -
Debugging data load from ODS to InfoCube?
Hi Expert,
I got some errors when I load data from ODS to Cube. I tried to simulate the load, but I got No data in PSA table. I checked mt Infopakage, it is only update Datatarget directly. How can I debug in this situation. I have only that choice "Data Target only" How can I select update Cube through PSA? Thanks in advance!
WeidongHi robert,
Thanks for your reply! Do I have to delete the old one? It looks like that system generated two Infopackages - One is full update and another one is Initial update. I think that I have to delete both of them and re-created both, right? Thanks a lot!
Weidong -
Direct vs Indirect data load from ODS - InfoCube
We know that there are two options to load data from ODS to InfoCube:
1. Direct load:
If the ODS setting is checked with the option of "Update data targets from ODS object automatically", then when loading data to ODS, then the data also can be loaded to the InfoCube, in this way, only one InfoPackage is needed to load data to the ODS, then the InfoCube can be filled with data automatically.
2. Indirect load:
If the ODS setting is NOT checked with the option of "Update data targets from ODS object automatically", then not only the InfoPackage to load the data to the ODS is needed, but also the InfoPackage to load data from the exported datasource of the ODS to the InfoCube is needed to be created in order to load the data from ODS to the InfoCube.
I wonder what are the pro and con between the above two loading methods from ODS to InfoCube.
Welcome to every BW expert inputs!HI Kevin,
Direct Loads or rather Automated Loads are usually used where u need to load data automatically into the final data target. And it has no dependencies.This process has less of maintenance involved and u need to execute a single infopackage to send data to the final data target.
But Indirect Loads are usually used when u have a number of dependencies and this ODs object is one of the object in a process chain. So if u require the this ODS data load wait till some other event has been executed , then indirect loads are used through process chains.
Regards,
JAsprit -
Delta load from ODS to cube failed - Data mismatch
Hi all
We have a scenario where the data flow is like
R/3 table - >dataSrc -- > pSA - >InfoSrc -> ODS ->Cube.
The cube has an additional field called "monthly version"
and since it is a history cube , it is supposed to hold data
snapshots of the all data in current cube for each month .
We are facing the problem that the Data for the current month
is there in the history ODS but not in the cube . In the ODS ->Manage->requests
tab i can see only 1 red request that too with 0 recs.
However ,In the cube -> manage-> reconstruction tab , i can see 2 Red request
with the current month date. Could these red requests be the reason for
data mismatch in ODS and cube .
Please guide as to how can i solve this problem .
thanks all
annieHi
Thanks for the reply.
Load to Cube is Delta and goes daily .
Load to ODS is a full on daily basis .
Can you help me how to sort this issue . I have to work directly in production env . so has to be safe and full proof .
Thanks
annie -
Hi,
I have a question,
In book TBW10 i read about the data load from DSO to InfoCube
" We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
Please some one explaine me.
ThanksNo, it will not be 40.
It ll be 30 only.
Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
so it ll be like this 10-10+30 = 30.
Thank-You.
Regards,
Vinod -
Data load from DSO to Cube in BI7?
Hi All,
We just migrated a dataflow from 3.5 to 7 in development and moved to production. So till now in production, the dataloads happend using the infopackages.
a. Infopackage1 from datasource to ODS and
b. Infopackage2 from ODS to the CUBE.
Now after we transported the migrated dataflow to production, to load the same infoproviders I use
1. Infopackage to load PSA.
2. DTP1 to load from PSA to DSO.
3. DTP2 to load from DSO to CUBE.
step1 and step2 works fine but when I run the DTP2 it is getting terminated. But now when I tried the step b (above), it loads the CUBE fine using the infopackage. So I am unable to understand why the DTP failed and why the infopackage load is successful. In order to use the DTP do we need to do any cleanup when using it for first time? Please let me know if you have any suggestions.
Please note that the DSO already has data loaded using infopackage. (Is this causing the problem?)
Thanks,
Sirish.Hi Naveen,
Thanks for the Reply. The creation of DTP is not possible without a transformation.
The transformation has been moved to production successfully. -
Partial data loading from dso to cube
Dear All,
I am loading the data from dso to the cube through DTP. The problem is that some records are getting added through data
packet 1 to the cube around 50 crore records while through data packet2 records are not getting added.
It is full load from dso to cube.
I have tried deleting the request and executing DTP but again the same no of records get added to the cube through datapacket 1 and after that records are not added to the cube through datapacket 1 ;request remains in yellow state only.
Please suggest .Nidhuk,
Data load transfers package by package. Your story sounds like it got stuck in second package or something. Suggest you check package size, try to increase to a higher number to see if anything changes ? 50 records per package kind of low, your load should not spread out into too many packages.
Regards. Jen
Edited by: Jen Yakimoto on Oct 8, 2010 1:45 AM
Maybe you are looking for
-
Unable to get SQL Server 2008 R2 to start SBSMONITORING service
Hi, I have been fighting with a Windows 2008 se rver and trying to get the SQL server ( SBSMONITORING ) Working. I have tried to start the service, always getting the error ' The request failed of the service did not respond in a timely fashion. Con
-
How to make the recv function in winsock2 stop after a specific time..?
In an developing a Windows Desktop Console Application in c++ in Visual Studio 3013 for Windows Desktop, which acts as a client and tries to connect to a server. Once the Connection with the server is successful, it sends a handshaking signal to the
-
How to automate "do not authorize" for scripted install?
I am a consultant for a library and they want to install Digital Editions on all patron and staff pc's. I've created a script (accor ding to the documentation) which works well (silent install, no CRC check, etc). But the first time Digital Editions
-
EFilm Lite for Mac OS X or a freeware third party viewer to view DICOM medical images?
Hello. Does anyone know if there is an eFilm Lite software for Mac OS X (10.5.8 and 10.8.4)? One of the medical doctors gave my client a burned CD with scanned X-rays, but we were unable to read the encrypted(?) 522 KB DCIM X-Ray image(?) files [Term
-
How to show the photos tab in iTunes? Problem since ios 7 update.
Where is the photo tab on iTunes? My iPad is listed on the left side in iTunes, but there is no photos tab. The left hand pane window in iTunes is maximized, but I do not see any tab for photos. Seems related to a recent update (IOS7?) as this was th