We have some quires regarding hardware True 64 bit + 64 bit

Dear All,
We are planning to upgrade form Ecc5 to Ecc6 .We have some quires
regarding hardware.
At present we have
Itanium 2 HP sever rx2620 No 2 for production server
Itanium 2
HP sever rx1620 No 1 for development sever /Quality sever
At present we have 64 bit server but we are planning to buy True 64 bit for the production server.
So our Itanium 2 HP sever rx2620 No 2 will be free and planning to
use this severs one as development sever and second Quality sever.
Please suggest that this sap setup is ok and will work because the
production server will be in True 64 bit and development sever, second
Quality sever will be
in 64 bit .
Regards,

Kumar,
1. Tru64 runs on Alpha processors. Those processors are out of production for quite some years now (Digital was bought by Compaq, Compaq was bought by HP and the processor development was cancelled). The last version of Tru64 is from 2000.
http://en.wikipedia.org/wiki/DEC_Alpha
<...>
The Alpha architecture was sold, along with most parts of DEC, to Compaq in 1998. Compaq, already an Intel customer, decided to phase out Alpha in favor of the forthcoming Intel IA-64 "Itanium" architecture, and sold all Alpha intellectual property to Intel in 2001, effectively "killing" the product. Hewlett-Packard purchased Compaq later that same year, continuing development of the existing product line until 2004,
<...>
2. ERP 6.0 and all successor releases (including other products based on Netweaver 7.00) are no more available on Tru64 as well as there is no Java stack (see http://service.sap.com/pam).
So your current plan does not work simply because neither hardware nor software is available for your chosen platform.
HPs IA64 is the successor and is supported long term.
Technically it's not a problem to use different OS or different databases for DEV, QA and TEST, you can transport as usual.
Markus

Similar Messages

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Im interested in a mac, but I have some concerns regarding windows and Boot Camp.

Having both Mac OS and Windows on 1 computer would be a dream for ne, however , I have some Feature concerns that im hoping someone may be able to adress.
1: Im an avid PC gamer, and use Steam to play all my games. Only a few games I own are Mac Compatible, And I was wondering, if I used Windows 7 Via Boot Camp, would I be able to play those games?
2: Would I be able to freely switch between Windows and OS without and consequences?
3: What Mac should I get to use Windows 7 (and aformentioned Gaming) Effectivly?
Thank you in advance if you answer!

1. Yes, Bootcamp gives you a 100% functional Windows machine.
2. Yes, you only need to reboot the machine each time to switch between OS X and Windows 7.
3. All current Macs will run Windows 7 as good or better than any PC/ Laptop.
For gaming, the Macbooks have mediocre video cards. The 13 inch has the Intel 3000 which is really not that good The 15 and 17 inches have the Radeon 6750M and 6770M. Those are much better for gaming (especially the 6770M. It's not a gaming card. Mac desktops have much better cards for gaming. The iMac has the 6970M. The Mac Pro would be the best gaming rig with a 5770, which isn't a mobile one (no 'M') and is the best performing card out of all of these. The Mac mini has the worst of all machines.
But since the Mac Pro is the most expensive, you're best bet is to get the 15' macbook pro for gaming. The 6770M is better too if you can afford it. The iMac would be the next step up, again if you can afford it.
Also, what bootcamp does is make a partition of your harddrive. In other words it splits your hard disk into 2 parts. Like if you had a 500gb hard drive, it would make 2 250gb hard drives- one with Windows files and one with Mac files. You can pick how much space you want to make the Windows partition.

I have some issues regarding my i photo

whenever i open my i photo and open any of ma albums ...some of the pics dont open....i do see them in the lower bar ....
plz help

So the thumbnails of your photos in the film strip in the Browser are o.k., but you cannot see the the full image in the viewer?
What is your iPhoto version? Are you running iPhoto '11 or an older version?
What exactly happens, when you are trying to edit a photo? Do you see a warning with an exclamation point? Are the hotos all black, or dashed outlines?
What happened, before this problem started? Did you move your iPhoto librar to a different drive? Did you install new software or update software?

I have some issues regarding my ipod not syncing certain songs to my new pc

i recently built up a computer and i installed itues and when i synced up my ipod only half my songs from my ipod acctually found their way onto the computer and i dont mean the odd song here or the re i mean entire albums, that are on my ipod ut not on my computer. and because of teh locked in nature of the ipod all i can do is veiw the DCIM folder and not were the music is stored to retreve it im wondering is there something i have overlooked or will i need to just deal with it. any help would be appreciated
M4CHELL

For non-iTunes purchased music you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities

Hi friends i have some problem regarding duplicates.

i am getting duplicate matnr numbers however i tried to avoid using delete adjacent duplicates statement.but still there are some duplicates while executing. howcan i avoid them.please let me know.

Oh i see...
Sorry if I misunderstood your requirement. Well if the average value is your concern what you can do as what Thomas suggested is to use the COLLECT command. Here is an example:
types: begin of t_itab2,
        average type p decimals 2,
       end of t_itab2.
data: it_itab2 type standard table of t_itab2,
      wa_itab2 like line of it_itab2.
loop at it_itab1.
wa_itab2-average = it_itab1-average.
collect wa_itab2 into it_itab2.
endloop.
it_itab1 is your original internal table that contains your records while it_itab2 is your internal table that will hold the sum of your average field in it_itab1.
After looping, write the result.
P.S. Please award points for useful answers.

I have some queries usage of RAID 1 on OSX

Hi there
I apologise for the length of this question, but there's quite a bit of relevant data. I work in a small typesetting company (<10 employees) and since a HDD failed on an old G4 iMac that we used as a data archive we have learnt that without our data we are nothing. I have now been asked to implement a more reliable back up/recovery system (with minimum downtime) that increases the 'safety' of our customer's data. Rebuilding the archive took days to sort out and because the archive was constantly accessed by our production macs and a couple of PC as well, it hit us hard.
We are looking into turning an old G5 Powermac (1.8Gz single processor 2.5Gb RAM) into a RAID 1 (mirrored) system with 2 x 1TB SATA drives using Disk Utility. We would have this to protect against one HD failing and losing customers' data. I understand that this is not a back up system, just something that would protect customer's data should a drive critically fail. I have some queries regarding how this works though.
1) How much (if any) maintenance is required on a RAID system? None of use are IT specialists - just typesetters with a bit of technical knowledge.
2) Is a mirrored RAID system reliable, considering multiple people are reading/writing to the machine throughout the day?
3) Do RAID 1 systems handle being accessed by different OSs (WinXP, Win7, OSX 10.4–10.6) well?
4) Am I right in thinking that OSX would see the two drives as separate volumes?
5) Should one drive fail and need to be 'rebuilt' via Disk Utility, can users still access the one working HD, or do you need to replace the failed HD and rebuild before anyone can access the data again?
6) Considering Question 4 above, do we need to have a 3rd 'spare' 1TB Drive just in case?
7) We are looking into a two-week backup system, backing up all the customers data on a daily basis, with the previous week's disk being stored off-site. We were initially looking into either Carbon Copy Cloner or RSync the copy data to external HDDs. How would you rate Time Machine against these products, and does anyone have any experience using these solutions with RAIDed Macs?
8) Is there any 'downside' to RAID 1 systems?
I know this is a lot of questions, but I really don't want to start down this route unless I understand it better first.
Many thanks in advance for your contributions!

Mac_fool wrote:
Thanks for your reply!
So, in order to have a RAID visible and accessible by multiple OSs, and to eliminate downtime during rebuilds, a hardware RAID would be necessary.
Well, not quite. When you create a RAID in Disk Utility, the volume only exists as a MacOS X file system. Your Mac can share that volume to any other machines or operating systems.
What I mean by a hardware RAID is some box whose output port is eSATA or USB or some other non-network storage port. On such a device, the logic to create the file system is inside the box. Any machine that is connected to it would see only a single disk. You would still have to ensure that different operating systems could understand whatever file system you were using (HFS+, FAT, NTFS, etc), but that is the same as if you had a non-RAID external drive.
I have one of those. It is an older FireWire 800 drive that has two 300 GB disks inside. To any machine I connect that to, it appears as a single 600 GB drive. This particular device isn't designed for mirroring, however. If it were, it would only show itself as a 300 GB hard drive and I would have the capability to easily swap out the internal mechanisms when they fail.
By 'hardware RAID', do you mean inserting a RAID controller card inside the G5, or a separate storage device, such as a RAIDed NAS-type-thing? Would an ethernet-connected NAS be slower to access than a G5 with internal SATA? Am I right in thinking that those RAID-ready NAS devices cannot be partitioned at all?
I qualified the above to explicity avoid NAS devices just to simplify things.
I'm not familiar with RAID controller cards. My guess is that they are just a cheaper alternative to an external RAID device. It would allow you to plug your own hard drives into the controller card and create the RAID. They would certainly provide higher performance that if the operating system were handling the details.
If you want to have a RAID for data reliablity, you really need an external, self-contained device that has a standard hardware storage port you could plug into any machine. It would look and act just like any other external hard drive. But if a drive failed, a light would flash on the box and you could just pull out the failed hard drive and replace it with a new one. You wouldn't even need to power anything down.
For both RAID controller cards and stand-alone boxes, you may or may not need additional software to partition and format the drive. It depends on the model and manufacturer.
Such a device could also be NAS. In this case, it would have an ethernet interface instead (or in addition). The difference is that such an interface would almost always be slower than a true storage interface like Firewire or USB. Plus, you would usually have to let the box itself handle its partitioning and formatting. Since it is designed to be a networked drive, you don't need another machine to be the server. It is its own server. This is useful in those cases where you don't want/need a dedicated server. The downside is that it probably runs some lowest-common denominator Windows networking for maximum compatibility. Foreign, networked filesystems are always going to be more flaky. Some software may not work. Some OS upgrade may give you hassles.
To be honest, I'm no expert on RAIDs. In such situations, I usually just defer to people I know are experts. So, just buy the amount one of these: (http://eshop.macsales.com/shop/hard-drives/RAID/Desktop/), plug it in, and go. I suggest RAID 5.

I have some queries related to Nexus .

I have some queries regarding Nexus Architecture.
1) We have MSFC and PFC for layer 3 & layer 2 communication in 6500 .
How layer 2 & 3 traffic is been handled in Nexus. Do they have a specific asics. What are those asics ?
2) We have three types of line cards in 6500. Classic /fabric enables/fabric only.
Are all line cards in Nexuas are facbric only. What is the Asic which we use for distributed forwarding in line cards in Nexus as we use DFC in 6500.
Fabric modules in line cards are used for providing wire speed or it has other benefits as well. can i say it is just a kind of constellation bus which we had in 6500.
3) Are there and D bus/R Bus / EOBC on Nexus.
I believ D- bus wont be there as it use fabric. What about the results. Does it use the same LTL index logic to calculate result. I believe it should as it is from same family as it is known as EARL 8.
How does it handle control plane traffic / data and result .
Lets say I have a machine A connected to Module 2 port 1 ( M1 card) and machine B connected to module 3 port 1 on same chassis(7018) .
What will be the whole process which it will follow. Let say layer 2 traffic will be handles by Superman and layer 3 will be handles by Tycho.
if any one can explain me the whole packet flow that would be great.
4) What is the role of Supervisor in Nexus. It has central Arbitar Asic which id some thing diffrent then 6500. VOQ is also handled here. Can we say if we use central Arbitar Asic on line cards ...They will start working as supervisor some what .
Any comments will be appreciated.
Thanks
Namish
3)

1- Nexus used distributed architecture and all the line cards support L3 except the F1 which you need to mix it with M series to get L3 functionality
2- nexus has diffrnet architecure form 65K however new line cards can provide you line speed 10G per port such as F2
3- Nexus uses fabric modules with full mesh channels between these modules and each line card ( provide you much more capacity than 65K for sure )
for packet flow you can find it on cisco.com because it long a bit however in brief:
- Unicast Forwarding Distribution Manager (UFDM) interfaces
between URIBs on supervisor and IP FIB on
I/O modules
- IP FIB process programs forwarding engine hardware on I/Omodules
4- the Unicast Forwarding Distribution Manager and L2 forwarding manager are examples of what is hosted in the SUP
hope this help

Clean installing Lion- have some questions.

I'm gonna clean install Lion on my macbook pro and have some questions regarding the same...
should I update to 10.7.2 and then clean install or will i have to update again anyway after a clean install?
is it true that downloading mac app store apps again from the app's page reincurrs the charges?
any best/worst practices i should consider while reinstalling Lion? I'm gonna perform a clean install.
most important... how do i initiate a clean install?!
Thanks for your time, in advance.
Neerav

Thank you, that definitely suggests that it isn't actually doing anything useful!
I switched it off, cleared the PRAM and re-formatted the drive unencrypted (I found the option, it was in the dropdown for filesystem).
That appears to have been the issue, as the download and install immediately identified the disc name, which it wasn't doing before. Guess it was having an issue with my encrypted drive. I guess it's handy I'm not a secret agent or an political dissident I shall run unencrypted...

Some questions regarding CO-PA

Hello Experts,
I have some questions regarding de COPA module:
1-Where can i find wich G/L accounts are assigned to a especific condition type? Is there any transaction where i can check the g/l accounts for the condition types?
2-I heard that the condition type VPRS is statistical, can anyone explain me this concept?..wich accounts are assigned to this condition type?
3-Does anyone has a list of the most relevat transactions for COPA? especially regarding the value flows and the closing.
Thnak you for your support!
Leandro.

Hi,
a) VKOA transaction
b) try reading this one: http://help.sap.com/erp2005_ehp_04/helpdata/EN/40/c52df80d1e11d2b5cf0000e82de856/frameset.htm Statistical means that the value in the CO-PA document for VPRS is also updated (truly) in other CO component. For example, revenue could be assigned truly to CO-PA segment and statistically to, let's say, cost centre. With material costs - it's the opposite.
c) most of the data is flowing to CO-PA from other modules. However, just go to the standard menu: the transactions for CO-PA are not so many.
Regards,
Eli

Some concerns regarding upgarde

Hi,
We are upgrading our portal from SP11 to SP16. We have some concerns regarding certain customized PAR files.
e.g. During our SP11 implementation, we had copied and renamed the com.sap.portal.runtime.logon.par to a custom one and assigned this for our logon.
Have there been any major fixes in this PAR for which we need do the same customization for the PAR of SP16, or we can continue using the same SP11 PAR? Same goes for the Masthead and other personalization PARs.
Hope SAP has kept the main components separate from the customizable components, so as to leave only the JSPs to be customized so that the upgrade does not need re-implementation and also gives us the advantages of the upgrade.
Regards,
Nirav Mehta

Hi,
There is really no way to tell, other than unpack the par files (and possibly decompile the classes) and do a file compare (winmerge http://winmerge.sourceforge.net/ is good for this).
The recommended approach is to reapply the change using the code of SP16 and througoughly test it.
Dagfinn

I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone? Thanks!

I have some audio files on my previous phone which I would like to export to my new iPhone 5. I am told that you can only import files from iTunes. Is that true? If not, how do I import files from my phone - or my Macbook pro laptop-to my phone? Thanks!

iTunes will only import music from your phone that was purchased from the iTunes store. To transfer music from other sources you have to use 3rd party software, such as PhoneView.

I have some problems while passing control array as refernce to the sub vi and sub VI crashes not deterministically after few minutes

Hallo every body,
i have some questions when i am passing the refernces to the sub_VI
1)when i run the application, the blink indicator(in main VI) starts blinking. even in sub_vi for true case i set it true and for false case i set it false. why from begining of the execution it starts blinking?
2)the stop button i am using in main VI is too slow. when i press the stop button it takes too much time to stop the application. why?
3)the array control (amplitude, freq,total time taken )
i am creating references of array. then these references i am sending to for loop. where it will convert as scalr values and then these scalar values to the sub_vi. opposite to it i am getting the reference of scalar cycles value and i am buliding an array of these scalar cycles to show it in indicator. it seems not to be working properly. why?
for this exexution some times i get error 91.
4) sometimes in the begining i get error 1055. why?
5) my sub vi crashes not deterministically.some time times after 2 minutes. some times after 5 minutes. by crash i mean i dont get an error but on the oscilloscope i see not smooth sine signal, but some strange broken, unbroken, delayed(all together mixed signals). why?
thanks for the important suggestions.
Regards
Attachments:
Check0.llb ‏204 KB

1) At some point the Blinking property gets set. Then the errors result in the program terminating. The property never gets reset. Setting a Property node in the main VI with Blinking = False prevents this.
2) You have 1 second Wait until next multiple delays in both the main and subVI loops. Depending upon which delays have executed when you push the Stop button it can take two seconds or more before all the loops execute again and note the Stop button.
3) The references are to arrays. (Time Taken, Amplitude, Cycles and Frequency) but you are connecting scalar values to the Values properties. Variant does not mean you can connect anything and it will convert to what you want. Once the Type has been set (when the control was created), the property node input matches that type.
4) 5) I never got this far so I cannot explain these errors. However, I suspect that once you fix the others, these will either be fixed also or the cause will become more apparent.
Lynn

We have some quires regarding hardware True 64 bit + 64 bit

Similar Messages

Maybe you are looking for