We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

Hi All,
We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
Regards,
Rohit Sharma
Edited by: rohit sharma on Jun 19, 2008 1:26 PM

I´m not sure what you mean by "old table to new table".
The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.
Markus

Similar Messages

  • Upgrade from SAP Webas 6.40 to SAP Netweaver 2004s

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

    Do we have to change the virtual host name used for high availability clustering environment to local host name before we conduct the upgrade from SAP WebAS 6.40 to SAP NetWeaver 2004's ?

  • Follow up activities after SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4

    Dear Friends
    We have completed SAP (CU&UC) upgrade from SAP 4.6c to ECC6 EHP4.
    We refereed the upgrade guide for follow activities and we required confirmation before performing the activities.
    Could you please help us what needs to be done immediately after upgrade.
    Regards,
    Bharathi

    Dear Nils,
    Thanks for the support.
    Yes, we are following the same document 'CUUC46C_to_NW701SP07' for unicode conversion after the upgrade from the note 928729.
    Please suggest us in that document which are the steps should be carried out after ECC6.0 EHP4 upgrade,
    1. Preparation
    2. Unicode Preconversion Phase in SAP Basis 4.6C
    3. Upgrade Process
    4. Unicode Conversion Phase
    5.  Unicode Conversion Completion Phase
    6. SAP Notes
    Regards,
    Bharathi

  • How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

    Hi Experts,
      I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
    GRC 10.0 only work on NW7.02,we now have NW7.01. 
      How  to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
    Use EHPI tools or just spam/saint  or any other way ?
    current version:
    SAP_ABA 701 0006 SAPKA70106
    SAP_BASIS  701 0006 SAPKB70106
    PI_BASIS 701 0006 SAPK-70106INPIBASIS
    SAP_01 0006 BW SAPKW70106
    Thanks!

    HI,
    Net wevaer 7.2 CE is totally different from Net weaver 7.01.
    No relation i feel.kindly check the links.
    http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
    http://help.sap.com/content/documentation/netweaver/index.htm
                      OR
    You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
    You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
    Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
    Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
    *Regards,
    Ajitabh

  • Upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5

    Hi
    We are doing upgrade from SAP BO 3.1 SP3 to SAP BO 3.1 SP5, can you please help in below points
    1. How much time does it take to run SP5 upgrade service pack for servers and client tools. The server need to be upgraded only on weekend, is it possible to upgrade in 1.5 days?
    2. The OS is Windows 2008 server. what should be the rollback plan in case of upgrade failure ? One of server uses VM image while Production server doesnt have any VM image.
    3. If BO client tools are on SP3, can they still connect to BO server components on SP5 - (for interim period when servers are upgraded first)
    Thanks
    anu

    Hi Anu,
    1. The upgarde should be completed in 1.5 days for the server and client componenets depending upon the number of servers you have in the cluster . If you are planning for upgarde do it successfully first on TEST , DEV and then proceed with PROD servers
    2. The roll back plan includes thebackup of the CMS database , the filestore directory and the complete installation folder . In case of any issue , you can the place the backup . If the servers are on the VM , it is always recommeded to have the snapshot of the images before the upgrade
    3. Yes, they can connect to the SP3 servers , but always recommeded to upgarde and have servers and client tools on same patch .
    Thanks,
    Sneha

  • Upgrade from SAP Training & Event Management (TEM) to SAP LSO

    What are the best practices to follow when you upgrade from TEM to LSO. Any issues to look-out for, avoid, etc

    Hi.
    I have a document from SAP related with CRM upgrade and CRM migration.
    I just don1t know how to insert it here on SDN. Yesterday I displayed my address on a message and I received a message from the moderator complaining about that.
    If you know were can I put this docs please forward.
    I get them from service.sap.com
    Migration guide has 280 Kb and Upgrade guide has almost 9 Mb.
    Kind regards,
    Susana Messias

  • Depreciation Run Error while Upgrading from SAP 4.6C TO ECC6.0

    Hi
    We are upgrading from 4.6c to ECC 6.0.  In ECC 6.0 we need to make the Number Range Interval as "Internal" and Batch Session tick to be removed from the Depreciation Document Type. 
    While executing depreciation run, it got terminated and I have done the above changes.  After that I have restarted the Depreciation.  I have got the following error Message.
    Message(s) during check of document ERROR00001
    Message no. AAPO511
    S:/SAPDMC/LSMW_AUX_020:006 20
    Message no. /SAPDMC/LSMW_AUX_020006
    If any body aware solution, kindly reply to this message
    Thanks
    siva

    Check this useful links
    Key differences between SAP 4.6 - ECC 6.0
    http://sap.ittoolbox.com/groups/technical-functional/sap-hr/difference-sap-ecc60-with-sap-r3-3161113
    LE/WM functionality difference between 4.6c and ECC 6.0
    differences between SAP R/3 ECC 6 & SAP R/3 4.6C in Material management mod
    Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes
    Upgrade from SAP R/3 4.6 C to ECC6.0 - To find obselete and new tcodes

  • Error after upgrading from  sap b1 pl 35 to pl 49

    hello sap experts 
    iam getting the following error after upgrading from  sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
    "Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
    regards
    Jenny

    Hello Jenny,
    You may check by supreuser account first to see if you got the same error.  If not, it probably just related to user authorization.  If yes, it must be a bug.
    Thanks,
    Gordon

  • I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

  • If i want to use Icloud i HAVE to upgrade from OSX 10.6 to OSX 10.7 and it doesn't seem to work on my mac book. I thought i had managed then it said i needed 10.7 to be able to upgrade to 10.7??? Who can help? In app store i can only upgrade to M.LION?

    Dear Community members,
    the frustration is that Apple decide to go from Mobile me to Icloud, forcing clients to have an upgrade from 10.6 to 10.7, i do this on my iMAc but the agenda and contacts don't get synchronised within Icloud. It only works on iphone and ipad but my IMAC doesn't synchronise although i now have to correct software.
    I also needed to upgrade my mac book pro but by that time mountain lion was launched, i can now no longer find in App store how to upgrade 10.6 to 10.7 since Apple wants to promote Mountain lion. I then decided to upgrade my MAcbook pro to Mountain Lion but ididn't go through, process was each time interupted.
    So searching the internet i found a link to upgrtade to 10.7 and after 40 min of downloading the system said that i requiered 10.7 in order to be able to install 10.7.
    Hello IKafka?
    Can someone help me, since this has taken me now days and days and with zero result, i have to manually input my appointements and contacts twice since the system doesn't recognise. and I bet that afterwards i will need to invest more time to un-double all the data...
    Günther DAuwen

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I ppear to have been automatically enrolled for a 30 day free trial of Lightroom mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial I w

    I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I appear to have been automatically enrolled for a 30 day free trial of Lightroom Mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial, if I do not sign up and pay, I will only be able to view my pictures on the desktop but not edit them - surely this cannot be true. How do I un-enroll for the 30 day free trial of Lightroom Mobile and CC?

    When I was signed into Adobe (which was a requirement for installing the upgrade), Lightroom 6 told my at the top right corner that I had 30 days left of my free trial of Lightroom Mobile and Creative Cloud. In parallel with this forum posting, I am chatting with Adobe support. he is away to find out how to prevent any synching with Creative Cloud during the 30 day free trial. I do not think that Creative Cloud is an application that gets installed on your PC. I think Lightroom 6 has it built in, and can use it if if you are signed up to the Creative Cloud and Lightroom Mobile (which I am for 30 days)

  • I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides screen is ok. Is there a way around it? :(

    I have recently upgraded from my iphone 5 to a new phone. My iphone 5 's touch screen does not work anymore. I need to backup my phone, but I can't do it on itunes without my password. Everything besides the screen is completely fine-the screen will not recognize my finger anymore. I am not trying to fix the phone, but I need to have my contacts. The pictures have already synced, but I need my password to do a full backup. Unfortunately, I can't type in my password. Is there any way around it? If I take my phone to the apple store, will they be able to help me? I am not willing to replace the screen just to do this, however, so that is out of the question. 

    Someone else may have a workaround, but, as far as I know, if you cannot interact with the screen on the iPhone, there is no way to unlock it so you can get to your contacts.
    Were you saving them to iCloud by chance? If so, you can restore them to your new phone.
    ~Lyssa

  • I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

    I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

    Try to disable hardware acceleration in Firefox.
    *Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

    I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

    There has never been a reliable firewire ---> USB adapter suitable for external high speed storage.  This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
    The only high speed port on the Air is the ThunderBolt port.  There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

  • TS4036 Hi, I have recently upgraded from and Iphone 4 to 5.  I completed a back up on my iphone 4 via icloud which went ok.  When setting up my new phone I selected to set up as a new phone and not via icloud back up.  Is there anyway I can restore my det

    Hi, I have recently upgraded from and Iphone 4 to 5.  I completed a back up on my iphone 4 via icloud which went ok.  When setting up my new phone I selected to set up as a new phone and not via icloud back up.  Is there anyway I can restore my details to my new phone?  Thanks Hayley

    Welcome to the Apple Community.
    Navigate to Settings > General > Software Update and install any updates available.
    Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
    When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Maybe you are looking for

  • Install win 7 on pc with win 8.1

    i just got this 110-430 pc with win 8.1 installed. i replaced a 500gb sata drive with a 1tb sata drive. i reinstalled win 8.1 using a non hp install disk. unfortunately it installed it's own bios. i flashed the bios with the update from the hp site.

  • When reflow text; How to change paragraph automatically when changing frame

    Hi Im new to indesign scripts, but thought that this maybe was the right forum to ask the following question. (Im using Adobe Indesign CS.5 ) Im currently trying to import a file (word file / excel both is possible) into an indesign book and formatti

  • [SEMI-SOLVED; STILL CURIOUS] no more /dev/disk/by-uuid

    I installed another Arch in a spare partition, reformatting  sda2 and sda5 (swap). Since I use UUIDs in fstab, when I rebooted the previous installation in sda1 it failed to activate swap, since the UUID of that partition changed. Not a big deal: jus

  • Web-based data visualization tools

    Hi.  I originally posted this question to the LV forum, but I am going to modify my question because I think Diadem may be a good solution for us. I am embarking on a interesting research project that will involve recording lots of physiological sign

  • Touch Screen not working when plugged in via usb to laptop

    I am hoping someone can help me figure out what to do because I have run out of ideas... When I plug the phone into my laptop via the USB cable provided with the phone (2006 Dell 1710 Inspiron, Windows Vista) the touch screen does not work. The phone