We have upgraded to BI7 and When I am trying to save a query as workbook
Hi,
we have upgraded to BI7 and When I am trying to save a query as workbook and open it is opening but a junk data is getting displayed in the excel workbook.The excel version is 2007.
But when I tried the same with excel version 03 it is opening fine with valid data.
Pl help.
Thanks in adavance,
Thanks Bernd: I am using Adobe Acrobat 10 Pro. I did get a response from Dave Marchant which directed me how to find the layers icon and I found the options icon as suggested in Adobe Help. However, the options do not allow me to choose an option of either merging layers or flattening layers. I am a novice at this and am trying to get this 1-page pdf graphic to convert to a Word document. Is it possible that I already have a single layer pdf and that Word is doing something weird during the conversion? I tried to convert the document yesterday and I ended up with two pages in Word. One page had the text boxes and one had the river channels on which the text boxes had been inserted. This is not a document I created. We have been struggling for 5 years at various times to get this one page document into Word so that it can be used in multiple reports. Even the graphics departments at a couple of companies have not been able to get this document resized from the original 11 x 17 format into 8.5 x 11. I managed to get that done yesterday. But now can't get a useable version into Word. Suggestions?
Similar Messages
-
I have an iphone 4 and when i'm trying to open messages it just opens a blank page
After a few seconds it goes back to the menu screen. I've reset it and recovered the OS but it's still doing the same. I suspect it's connected to a large image file sent to me but I'm unable to get into the messages to clear this.
Any ideas?Close out of the message app, then double tap the home button and completely close out of the app.
then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait until the phone boot backs up. -
I have upgraded to Lion, and want to upgrade my iPhoto 8.1.2, but when I try it says it was not purchased at a MAC Apple store, which it was. Then it asks if I want to buy 9.2.3, and I say yes. It responds with Product Distribution file can't be verified. Maybe damaged or not signed. How do I get this fixed, so I can download the new iphoto's that are available.
How did you move your iPhoto library to the new system? the recommended way is Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
LN -
I have just upgraded to iOS7 and when I open my apps some have data saved and some (Eden, Survivalcraft) do not. My son is distraught that all his hard work has gone so does anyone know why this would be and how do I fix it please?
Nevermind. Problem solved. They were there. I just couldn't see them.
-
I have recently upgraded to Yosemite and when trying to launch PS I get an error message 150:30. Can anyone help me out with this please?
Yes. The upgrade broke your CS4 install. You have to reinstall.
Easiest way to fix this is to download the installer Download CS4 products and have your serial number at the ready.
Then you will need to download and install the updates for Photoshop, Camera Raw, and Bridge here: Product updates
There is a Terminal fix, but you have to be familiar with Terminal and running the python license Repair script. You will need the bash shell on your user account. If that makes sense to you, we can try that.
Gene -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
Mac, have just upgraded to Yosemite and when I shall open Photoshop (CS4), the following message appears:
"The licensing of the product does not work"
Fault 6
How should I proceed?
Have the program installed on only one computer.Download the Adobe Licensing Repair Tool.
Run the License Service Update.
Mac OS X 10.7 and above:
a. Double-click the LicenseRecovery111.dmg It will extract the folder. Open the folder.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type sudo python
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery111 folder onto the Terminal Window and press Return.
It should look like this:
h. Enter your administrator user name and password when prompted and click OK.
(Note: the cursor will not move and you will not see stars or dots, just enter your password anyway.
i. Let the script run, it will tell you when it is finished. Quit terminal and restart Photoshop
Gene -
I have a new computer and when i plugged my iphone in to upgrade it, I lost all of my songs and applications. I need to know how to recover it as I've looked all over the website and my account is empty?
If you are in the USA (is that Pearland, Texas), with iTunes 10.3 and iOS 4.3.3 or later, you can download your previous purchases directly to your iPhone, iPad, iPod touch, or computer.
Here are the instructions: Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519 -
I have just upgraded to Yosemite, and when trying to update Pages, get the message incompatible update!
If you are using track pad, please use mouse and see if your issue is resolved.
Moreover, this issue has been resolved in PSE 13. You can give it atry as well.
Thanks!! -
Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????
My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why? -
Have upgraded to 5c and want to give my 4s to parents. Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode. If I erase all content and settings will that take it back to how was when bought? Thanks.
Hogey1301 wrote:
Trying to get 4s back to 'factory settings' as was when bought but cannot remember restrictions passcode.
Restore the Device as New... See Section 6 here...
http://support.apple.com/kb/HT4137
Hogey1301 wrote:
Have upgraded to 5c and want to give my 4s to parents.
Follow the Check List here...
What to do before selling or giving away your iPhone, iPad, or iPod touch -
I have upgraded to io6 and can no longer play gnomevillage. Can anyone please help me? Thanks.
I have upgraded to io6 and can no longer play gnomevillage. Can anyone help please. Also I have changed my password on the desktop (which I knew) but now when I log into the ipad it says I dont know my password.
Kurt Lang wrote:
Quark XPress 8 has a few of those PPC only tools, too. Like they they forgot to update them or something.
They were already at v9 when Lion came out and decided that official support would be for v9 only; see here.
According to this, the only thing PPC in v9 and v8 are video encoding for SWF export -- looks like an XTension according to System Profiler. Given their position of not officially supporting v8.x in Lion, that will probably always remain broken in v8. I use v8.5.1 in Lion; works fine for me -- I don't do any SWF exporting.
I have a few other things on my MBP, recently upgraded to Lion; I upgraded just about every app to the latest versions with exception of Quark. The only other PPC things besied that XTension are some scripts from Adobe Illustrator CS5.1, which got installed with CS 5.5. I guess Adobe forgot to upgrade those. No biggie, I never use them. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
I have 10.5.8 and when I run software update, it says it is up to date. How do I update further?
Welcome to the Apple Support Communities
Snow Leopard is a paid upgrade, so you can't get it in Software Update.
First, check if your Mac is supported > http://support.apple.com/kb/sp575 Then, buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
After that, make a Time Machine backup and/or a clone with Carbon Copy Cloner, insert the DVD and upgrade. The disc will upgrade OS X to 10.6.3, so open > Software Update and install the most recent version -
HT4910 I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?
I just upgraded to 4s and when i backup my iCloud my apps and pics are not coming over?
I'm assuming you have performed a restore from an icloud backup...
Many users have lost photos while preforming a restore from backup or upgrading the iOS. Recall, only photos in the camera roll are backed up to iCloud. There is a way to turn backups for camera roll on/off, perhaps these users had camera roll turned off.
See:
Settings>icloud>Storage & Backups>Manage Storage, tap the device's name and on the next screen, be sure Camera Roll is turned on.
IMPORTANT...
Photos should be regularly synced to a computer (like you store photos from a digital camera) using either USB via iTunes (on a mac use iPhoto or Aperture to move them to an album) or using photo stream. If you have been doing that, then you can sync those photos back to your device.
If you haven't been saving photos except relying on iCloud to store them in a backup, then that is risky, as many users have discovered. I'm afraid I have no advice in this case - there is no "cure".
As for apps, you could always download them again from the itunes store, without charge. Look for the link to purchased apps, there you'll have a list of the ones you can download free.
Maybe you are looking for
-
Can't change activation only mode to off using the command line in Windows 7 64 bit
I used the command line to turn activation only mode on and now when I use teh command to turn it off it will not change the iTunes setup. I am on Windows 7 64 bit. I tried uninstalling itunes and reinstalling and it is stillin activation only mode.
-
Problems between a Wireless Controller and a Switch.
I have a Wireless Controller 4402 connected to one sw2960G. I configured the controller with LAG and the switch (sw2960G) with etherchanel. I connected the controller 2 distribution ports to the 2 ports of the switch (configured with etherchanel). It
-
Group Selection tool missing from tools
Hi all, My group selection is missing from my toolbar on the right and is replaced with position tool. Is there anyway of getting it back? Thanks in advance for your help.
-
i do i get my free apps back after i did updates and could not download and when to backup recovering
-
SQL task fails if previous task fails
I have a Script task that I fail in the code explicitly based on a variable value. When the script task fails, I set a constraint (failure) to execute the following SQL task However, I was thinking the SQL task would execute successful, especially s