We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at 0x....bad8 The memory could not be written Click ok to terminate the program)
Instruction at 0x...bad8 bad referenced memory at 0x....bad8
The memory could not be written
Click ok to terminate the program

Hi SUBRAMANIAN,
Are you still facing this issue? It seems to be conflict to me.
Are you using any third party plugins with Acrobat? Try disabling and to use it again.
Regards,
Ajlan Huda.

Similar Messages

Just installed reader.Have windows 8.1 Lenova. cant open Reader or pdfs without error: AcroMissingCompWClass: AcroRD32.exe Application Error.

Just installed reader.Have windows 8.1 Lenova. cant open Reader or pdfs without error: AcroMissingCompWClass: AcroRD32.exe Application Error.

it only fails to open PDF attachments to Outlook 2010 operating with 8.1 or 8.2. you previw them and save them and open but not open directly.

Satellite L300D - recovery error BSOD+imagex.exe application error

Hi,
My Laptop lost function a while ago due to some unknown errors. I managed to get most of the data out through safemode and have transfered them to my desktop.
The problem I am having now is repairing my laptop. I have since lost my receipt and therefore unable to claim warranty; but I figured I could restore my computer to its factory state with the recovery disk I created. The original problem and the one I am facing can be seen here...-> http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153146#153146 <-
As you can see from that thread, the recovery disk didn't work. So based on the advice I received I went to a Toshiba authorised computer repairs centre today and they replaced my Hard Disk Drive with a Fujitsu SATA 120GB. I then attempted to use the recovery disk but ran into a few hiccups. 1) A BSOD comes up randomly during the restoration i.e. During image copying it would pop up... sometimes it would pop up when it is finalising the recovery. 2) Sometimes, the BSOD will be bipassed and instead, an error would come up at 3% of installation finalising saying that img could not be copied from HDD to C/:! 3)Sometimes an image.exe application error would come up saying 'The instruction at 0x77c45a20 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the programme.'
NOTE: None of the these problems occur in the same recovery trial. But they DO come up randomly and when they do, I have to restart the computer and try again.
My question is this. Since the last piece of advice was to replace my faulty HDD, and I have done so, why am I still unable to repair my computer? And if it is not the matter of HDD, then what is the problem here? I am desperate in fixing my laptop as it is meant to be my 14 year old desktop replacement. Thank you all for your kind attention; I only hope that there is someone out there who has faced and overcome such a problem before.

Hi!
Its not easy to say what the reason is for this. It could be a faulty RAM, mainboard or maybe the HDD again. So it could be bad luck that the new HDD is also faulty
I think you should test something on your notebook with special diagnostic tools.
http://www.hitachigst.com/hdd/support/download.htm#DFT
With the Drive Fitness Test you can test your HDD. Download the CD image, burn it on a CD and boot from it. Then you can test the HDD.
On the same website is a user guide if you want to know more.
http://memtest86.com/
Memtest86 is a diagnostic tool to check the RAM. There you can also download a CD image.
Its easy to use. Run the test 3-4 hours and then you will see if the RAM has some errors.
After this post your result. Maybe one the tests can find an error.
If not you should try it with a Microsoft installation disk. Maybe the recovery disk is scratchy or so
In you cant find something you should go to the ASP again. Speak with the technicians and explain the situation. I think they will try to help you as fast as possible.
Bye

I can't not open pdf files give acro missing compwclass acrord32.exe application error

I can't not open pdf files give acro missing compwclass acrord32.exe application error any fixes known. I did the repair on the program

What is your operating system? Reader version?

Error Code "Lightroom.exe Application Error"

Lightroom 4 crashes when opening. Error Code "Lightroom.exe Application Error"
Running Windows 7 64
Is there an easy fix.

[discussion moved to Adobe Reader forum]

I buy my ipod touch like 6 months ago it was working very well but yesterday it is not connecting to the internet when i am connect to my internet it said unable to connect can you please tell me plz help me

i buy my ipod touch like 6 months ago it was working very well but yesterday it is not connecting to the internet when i am connect to my internet it said unable to connect can you please tell me plz help me

Do other devices successfully connect to the router?
Does the iPod successfully connect to other networks/routers?
Does the iPod show wifi bands in the upper left?
Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering off and then back on the router
- Resetting networksettings: Settings>General>Reset>Reet Network Setting
- The troubleshooting here
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

I've got error message " CTSvcCDA.exe application error " during insall MediaSour

I need help anybody who has soultion about this error .
When I install Nomad Explorer & MediaSource, I had two error message .
first, in case of nomad explorer, "security.exe application error"
seconde,Mediasorce, "CTSvcCDA.exe application error"

Try disabling Protected Mode. But since you cannot even open Adobe Reader by itself, you can do it via the Windows registry: download, unzip, then run the registry script from https://files.acrobat.com/a/preview/441a5fb2-7a82-443d-9632-9a639692a565

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe application error . . . . I now cannot open any PDF's. Adobe seems to be unresponsive.

I have re-installed Adobe Reader on to my Windows 7 PC. When I open a PDF I was getting an error message containing . . . .Acrord32.exe
I now cannot open any PDF's and Adobe seems unresponsive. I have tried to follow a step by step guide on how to fix this but Adobe won't stay open long enough for me to complete the steps. When I open Adobe it stays open for a matter of seconds then minimises to the task bar and when I click on it again I can't do anything with it and have to close it via task manager
Please help!?

Disabling Protected Mode should fix the problem. But since you cannot even open Adobe Reader by itself, you need to do it via the Windows registry. If you tell me your installed Reader version, I can give you a registry script to do that.

AcroRd32.exe - Application Error

I got this message:
The instrucion at "0x0010479c" referenced memory at "0x0010479c". The memory could not be "read".
Click on OK to terminate or CANCEL to debug the program.
Either way it closes the PDF document.
Can anyone help?
thanks

Okay
I have Sandboxie, and Comodo Internet Security installed on my system, everything run well until CIS was updated from v.5.8 to 5.9. And since then this DLL file from CIS has been interfering with Sandobxie
Guard32 is a DLL file from COMODO, so it was figured out by the Sadboxie forum and I will post a problem on Comodo forum
After reinstalling Adobe everything flows normally outside the sandbox, just for your information
hope to help this somebody and Merry Christmas to all

ORA-12560 while installing database 11g 11..1.0.7.0 on Windows 2008 server

This started with an install of Oracle Financials that failed and led me to the discovery that I can't even install a generic database on this machine, the two issues are certainly related.
Why would I get this failure on a clean install???
Is there a problem with the computer being a domain controler or called Sampson-II ?
Thanks in advance.

Hardware Xeon processor 8 G of memory
Runing db as 32 byte
Software Windows server 2008 SP2
I'm not seeing any conflict with other prerequisites or tasks that need to be executed before the install is done.
The listener installs but when the database is to be installed, it fails.
Below is the install log. Your assistance is greatly appreciated.
INFO: This variable varSelect is not added to the global context map
INFO: This variable s_dbcaClasspath is not added to the global context map
INFO: This variable s_odmaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the OracleHome E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=true $*
INFO: The runConfig command is
E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands.bak
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools3
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Database 11g current size: 1
INFO: No of ExitOnly Tools in this session: 1
INFO: cf session for perform has hashcode: 20767108
INFO: detached tool list getting prepared fo comp: Oracle Database 11g
INFO: cfsession hashcode for exit only tools: 20767108
INFO: hashcode for action: 11062616
INFO: No of ExitOnly Tools: 1
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/netca.bat /orahome E:\app\Administrator\product\11.1.0\db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\app\Administrator\product\11.1.0\db_1\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\app\Administrator\product\11.1.0\db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\app\Administrator\product\11.1.0\db_1\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
E:\app\Administrator\product\11.1.0\db_1\bin\lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Setting Listener service to start automatically.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 1638 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
INFO: The OUICA command is launched from E:\app\Administrator\product\11.1.0\db_1\oui\bin\ouica.bat.
The installation of Oracle Database 11g was successful, but some configuration assistants failed, were cancelled or skipped.

Error Code AcroRd32.EXE - Application Missing

My Reader XI shows the above error message and closes the program.

[discussion moved to Adobe Reader forum]

Adobe Reader 10.1.2 Font Catpure AcroRd32.exe - Applicaton Error in Windows XP

Hi All,
I installed Adobe Reader 10.1.2 in windows XP, and I will get the below error when I open the pdf file:
Font Capture AcroRd32.exe - Application Error
The instruction at "0X8af9311" referenced memory at "0x8a2f9311". The memory cound not be written"
Even I try to disable the protected mode at startup, I still get the aboe error randomly.
Any advice on this.

Sorry for the confusion. Please try the following steps:
1. Launch Notepad and type in following:
Windows Registry Editor Version 5.00
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWithList]
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\OpenWithProgids]
"exefile"=hex(0):
2. Click on File > Save As
3. In the new dialog that appears:
Select All Files in the Save as type list, and then type C:\Exe.reg in the File name box.
Select Unicode in the Encoding list. Save it and remember the file location.
4. Open My Computer and double click on the C: icon
5. You will see a file by the name of "Exe.reg". Double click on the same and click Yes on any dialog that appears.
6. Once completed, restart the computer and your problem should be resolved.
Ankit

Explorer.exe application error "Memory could not be written" ?! OS seems stuck now

(Model # m6-k010dx) My new laptop after 13 months automatically updated from windows 8 to 8.1 after I had said 'no' as many times as it allowed. After the update my files are still on it and most things are there but it seems 'stuck' and the orange screen keeps flickering like start to desktop so fast you usually can't even click anything in time to open it before it switches. I was told that the drivers probably needed to be updated first (eventhough I am pretty sure I kept up with all my other updates that popped up the only one I postponed was 8.1) and that I should refresh it, so I lose my programs but keep my files. I'm so sad I now lost Photoshop cs6 and my prefered antivirus (webroot) But anyway back to 8.0, it functioned fine aside from annoying pop ups to install norton antivirus no thank you, i bought webroot again. no updates were available.
I went to HP.com drivers update, searched for my pc and its correct update, and next thing I know is it's installing windows 8.1....??!
So again when it's 'done' and reboots, the screens flicker forever. I shut down, restart, same. so I put it back to windows 8...it will install 8.1 on its own any day now.. Please help asap!!!
Also forgot to mention when the screens are flickering, a few explorer exe application errors pop up on occaision. IE: "the instruction at 0xaa0c663c referenced memory at 0xaa0c663c. The memory could not be written. Click ok to terminate the program." was one the last time,
and the time before it, the initial windows 8.1 update when I still had Webroot antivirus, the pop up said "the instruction at 0x9b63663c referenced memory at 0x9b63663c. The memory could not be written. Click ok to terminate the program." the other pop ups the initial time came from Webroot - IE: "This file is trying to install itself to start every time the computer turns on C: /Windows/system32/DrvInst (dot) exe" and gives the options to block, allow once, or allow always.
Another trying to install every time computer starts is "C: /WINDOWS/system32/wbem/WMIADAP (dot) EXE"
and another is : "Process ID: 4244
Thread ID: 3460
Event Type: Registry
Access: Write
Registry Key: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Services/NDIS/IfTypes/131
Value: IfUsedNetLuidIndices"
I searched all of those but found nothing. How can I have a smooth update? THank you in advance

Hi @ASAP666 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY m6-k010dx Sleekbook and trying to update to Windows 8.1. Before updating did you make sure your system was up to date with Windows. Here is something from Microsoft that might help.
Looking into this I have found that it is a driver issue usually associated with USB devices.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
I recommend to do this update to disable your Anti Virus or Webroot temporarily to allow the update to go through.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.

Win XP Home SP2
Installed Firefox, but receive the following error message:
firefox.exe +application error +the application failed to initialize properly (0x0150004) +click on OK to terminate the application.
Have uninstalled and reinstalled several times, but same message. Firefox won't even open.

Usually someone has been down the track before and occasionally they post some useful details which may help others to investigate and/or eliminate factors in their particular case.
This AccessibleMarshal.dll error seems to have a long history --- posts from 2006 with early Firefox versions had issues similar to yours.
There is a link and an excerpt below which could be worth checking in your case,
particularly since it mentions the problem would occur on a clean install (no previous instance of Firefox on the system and Windows before Vista --??)
Have a look here:
https://bugzilla.mozilla.org/show_bug.cgi?id=712960
and the post to read:
'''Mark Banner (:standard8) 2011-12-22 12:55:21 PST'''
"Created attachment 583905 [details] [diff] [review]
Add the Win32 redistributable directory to the mozconfigs"
"Somehow we missed shipping the Win32 Redistributables from Visual C++. We didn't detect this as it would only show on Windows versions less than Vista, and you'd probably only see it if you had a completely clean install, and you didn't have the dlls installed elsewhere (as it appears my XP system does)."
"If you're seeing this then you want to copy the following files from a Firefox installation:
Microsoft.VC80.CRT.manifest
msvcm80.dll
msvcp80.dll
msvcr80.dll
The patch I'm attaching updates our configuration files to specify the Win32 redistribution directory, which will then cause the build system to include the files in the build."
.... ends....
The earlier 2006 instances also had the same issue in some cases:
forums.frontmotion.com/viewtopic.php?f=10&t=393
Hope this progresses the search and resolution.
Cheers

Acrord32.exe system error the program cant start because msvcp100.dll

Hello Adobe Community,
Im having problems with an XP Pro machine that is joined to a domain where i keep getting the following error message : " acrord32.exe system error the program cant start because msvcp100.dll"
I can temporarily solve this by uninstalling Adobe Reader and then reinstalling it. But the next day the computer restarts the same error comes up again. In other forum there was a solution to install Microsoft Visual C++. I installed it but the same problem happen again the next day. The Adobe Reader version I have installed its XI (11.0.03). If you guys could help me with this issue that would be great

It's not C++ you need to install, but the Microsoft Visual C++ 2010 Redistributable package. But I have no idea why this happens again the next day.

We installed the Acrobat Reader 11.0.09 on Citrix enable Windows 2008 server a month ago , it was working. starting from this weeke we are receiveing error mesaage AcroRD32.exe - application error (Instruction at 0x...bad8 bad referenced memory at

Similar Messages

Maybe you are looking for