WE NEED MORE CELL TOWERS!!!!!!

We need a verizon up here in alaska. Alot of people up here that i know wants to get verizon but can't cause there's no service. Like i had to send my replacement phone to a family member outside of alaska just to get it activated and then have them send it back... it IS a waste of money and their time to do something as simple as activating a phone.

Ask MSI if you want to complain or suggest a new product. This is a Users-to-Users Forum. As FM2 with cpu integrated gpu replaced AM3+ for small systems with onboard gpu that will none the less be most likely useless. It's AMD's decision.
>>How to contact MSI.<<
-- TOPIC LOCKED --

Similar Messages

How do I use GPS when out of range of cell towers, wifi, and bluetooth?

Recently, I encountered the following problem using my RAZR MAXX as an offline GPS device. I was in the Colorado back country trying to track my path with downloaded Topo maps, and found that the GPS was not responding to my app. When I looked at the app's satellite tracker screen, it showed some satellites, but no fixes. After some fumbling around, I found that, when I enabled cell tower communication by disabling Airplane mode, many more satellites showed up. After a moment, fixes showed up, and the app was able to locate me and track my path. This was IN SPITE OF the fact that the Droid never found a cell tower!
I also found that I had to keep the Droid out of Airplane mode, searching for service, in order for the GPS app to continue tracking. Any time that I put it in Airplane mode to disable service searching, the app's ability to detect satellites slowly degraded. After several seconds, it could no longer detect or fix on any satellites at all!! In order to restore the app's GPS tracking ability, I had to enable cell tower searching by disabling Airplane mode again.
Now, my question is, of course, is this the normal operation of a RAZR MAXX on Verizon? It would seem to me self-defeating to offer a functionality that only works when the Droid is draining the battery in attempts to contact non-existent cell towers. Is this truly the intended operation? Please tell me, so that I can either get my Droid fixed or pursue other ways of GPS tracking in back country. Thank you.
Model: DROID RAZR MAXX
Android version: 4.1.2
System version: 98.72.165.XT912.Verizon.en.US
Baseband version: CDMA_N_05.21.00R LTEDC_U_09.1D.00
Webtop version: wt-3.0.0
Kernel version: 3.08-g3617609 hudsoncm@ilclbld32 #1 SMP PREEMPT Thu Nov 21 14:19:19 CST 2013
Build number: 9.8.2O-72_VZW-16-5
Build date: Thu Nov 21 14:10:17 CST 2013
System updates says system is up to date.

NEVER MIND!!! The app I was using was BackCountry. May Need GPS Airtime! This app may need GPS Airtime to function properly on Droids. Please bundle GPS Airtime with the paid version of Backcountry. Had I but know this, I would not have posted on Verizon my question about Airplane mode and GPS functioning, and would have saved time on my recent trip to Colorado back country. As it was, I had to discover the Airplane mode/GPS relationship on my own. PS: App works great on my RAZR MAXX, now that I have GPS Airtime and doesn't work for sour apples without it.
HOWEVER, Verizon, what are you going to do to fix this? I'd still like to know that.

I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated

brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Software/cell towers question

I live in Knoxville, TN and recently went to Tampa, Fl for a short trip. My fascinate worked flawlessly while I was there. So my question is, does the cell towers have anything to do with the software issues on the phone? Like many others, I have experienced poor battery life, can't send or receive text, and missed calls. But the entire time I was there I had not one issue with any of those things, even the battery lasted longer than 12 hours. I currently am still running 2.1 in fear of locking up my phone which is not covered by any warranty since I bought it used. Thanks for your input.

Hi mgayle97! Yes, cell towers can definitely have an impact on phone performance. Cell towers provide access to the network. Their placement, tasking and area topography determine your signal strength (and thus data speeds and battery life). It's possible that your signal was stronger while visiting Tampa because of more outdoor usage, which will always improve service.

How large of a hard drive can I install on dual G5, and do I need more RAM?

I recently had a situation in which my dual-processor 2.0 G5 was completely refurbished by Apple repair-new logic board, both processors, video card, thermistor, all new. Finally it has been working well after a month of trips back and forth from the Apple store. I have two internal hard drives installed on my G5, both 300GB, one for OS applications, and one for audio. I am running out of space on my main hard drive, and so I recently purchased a Maxtor 1TB hard drive, now manufactured by Seagate, from Fry's. After having my G5 refurbished, I was having an issue with my Samsung 930B monitor going into sleep mode when I boot-up from a CD, but other than that G5 was working fine. I removed the main 300GB hard drive from slot #1 and put it into slot #2, from which I had removed my audio hard drive. I installed the Maxtor drive in slot #1 and reformatted it for Mac using my laptop with ATA/USB cables previously purchased for data transfer. This took about 14 hours as I used the "zeros" option. After that I hooked up the internal cables to both drives and tried to boot up from Leopard in order to install it on the Maxtor drive, but again my monitor went into to sleep mode. We went to the Apple store to try to see if there was an issue with the computer, but everything worked fine with their monitors and CD's, as well as my CD. So there is some kind of issue with my monitor, probably software as it works fine when booting up from the main hard drive, and also was fine when I did its self-test function. While at the Apple store, they installed Leopard from their hard drive which took about 30 minutes.
My problem is this: When I arrived home, I turned on my G5, which had been set to boot from my new Maxtor drive and complete the Leopard setup process, which we had decided to do at home as it would have taken another 20 minutes in the Apple store. The G5 turned on, chimed, I got the Apple screen with the wheel, but then after that my monitor goes into sleep mode. I can hear Leopard's setup intro playing through the speakers, but the screen is in sleep mode. So I reboot holding down the option key so I can boot up from my old (300GB) main hard drive, now in slot #2. This works and the monitor screen does not go to sleep. However, as I am browsing on the web to check for issues concerning this monitor, the G5 freezes, and I get a screen with black bars with writing in them and various technical language across the screen. This happened several times after rebooting. Finally I shut the computer down. I am going to try removing the new hard drive and putting both old ones back in and see if the G5 stops crashing. I think the monitor issue is a separate issue, and I am more concerned with the crashing, as previous to the new hard drive installation the G5 was working fine, monitor fine, other than the issue when booting up from a CD. Do I need more memory? Is the 1TB hard drive too large for my dual-processor 2.0 G5 and overloading it? Would I be better off with a 500GB drive? Would appreciate advice from persons with experience in this area. Thank you.

I have replaced my 5 year old G5 with a Mac Pro, as the G5 just had too many issues, even after replacing all major components (logic board, both processors, video card, etc.) Once I took out the 1 TB hard drive from my old G5, it stopped having the kernel panic issue. Nonetheless I had been through a lengthy repair process previous to this issue, so I didn't care to trust an older machine any longer, especially since being told by an Apple tech that the "new" parts were really just older parts stockpiled from a central location. Could be new, could be refurbished. Apple was kind enough to credit the money we had spent on the G5 repairs towards the purchase of my Mac Pro.

My ipad currently only has 18% charge, i want to download ios6 but it wont let me click on the button, could this be because it needs more charge

my ipad 3 currently has only 18% charge, ive just gone to click on the download button to download new ios 6 but its not highlighted so therfore i cant do it, is this because ipad needs more charge?

Yes, the update takes quite a bit of time (> 1 hr for my iPad2) and will not initiate unless you have enough juice in your battery or are plugged in.

I am getting a warning need more space on my disk. I have checked the Console and there have been 4000 thousand messages in my system log in the last 2 days. I have emptied as many files as possible.

Hi
I am getting a warning on opening my mac saying I need more space as my setup disk is full. I have emptied many files as well as my Trash. I am planning to get an external drive for my photos, but it has been suggested that I check Console and under the system log the following message (of which they say 4000 messages have been logged in 2 days) '06/06/2014 16:08:23.341 com.apple.dynamic_pager: dynamic_pager: Need more space on the disk to enable swapping'. This is a copy of one of the items. It is from the system log. I really do not think I have enough files to warrant this warning, with the exception of photos. My storage shows 143 MB free out of 120.47. Thanks for any help.

First off, no MacBook Air can run 10.3 or earlier.
Secondly, are you sure you only have 143MB of storage free? That's seriously low. With MacBook Airs of 120 GB hard drives, or even 140 GB which is often the case when it says out of 120, you shouldn't allow your free space to go down below 20 GB. MB is 1024 fold less than a GB. So if you really have 143MB free on a MacBook Air, you are long past the minimum space you should be keeping it at, and need to start clearing a lot of space now*:
http://www.macmaps.com/diskfull.html
I'm asking this thread be moved to the MacBook Air forum,a as we can't say for certain what you have when you post in the 10.3 or earlier forum.

PS CC Says I need more than 512 Vram ...

I was using Photoshop last night just to prep a couple of photos for class submission (3 pictures, just reducing their size for web consumption), and I got the message stating that I needed more than 512 Megs of Vram, which was odd to me, as I have 1024 Dedicated available on my video card. I don't run a dual monitor setup any longer, but I do have an ASUS PBs278 that's running at 2560 X 1440. My current graphics card is an ATI Radeon 6800 HD, and my windows 7 system is running on 8 gigs of ram. Up till within the last week, CC has worked just fine, but the other day on boot, it took an unusually long time to get into the software. It eventually did, and I'm wondering if that was an update or some such that's now made the software decree that if it doesn't have the 512 it thinks it should have, the 3d functions won't happen. I don't know if it's a consequence of the larger quantity of pixels being pushed, or if it's the video card getting too old to support CC at such a high resolution now, but some help would be amazing.

Windows 7, 64 bit. I haven't been able to replicate the error, but I have the new drivers as well. I hope this just ends up being a fluke.

How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.

The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

I need more than the maximum allowed 30 profiles - how do I change this?

I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

NEED more than 15 menu item in Context Menu ????

Hi,
I really need to have more than 15 menu item displayed on Context Menu. I desperately need some workaround or ideas to achieve this
My client has invested thousands of dollar in Flex Project, he definitely need more than 15 menu item.If this project failed , client will NEVER think to invest in flex.
Had I been aware of this limitation before I would have thought some solution by now.This comes as a surprise to me at the last moment ,just fews days before Prod Date.
I cant also user java Scrip heck as my Flex application is running inside Dot net Container , I do not access to the luxury of java script
Pls gents help me get rid of this ...PLEASE provide some ideas.
Thanks in advance.
Thanks,
Dharmendra

Thanks Natasha,
I got your point but as for as I know grouping like Quality is not possibel in Flax Context menu. I also cant go for window style menu(file,edit) because I need them to be displyed on DataGrid right clk . I am designing a trade datagrid where in trader can see all trades and he can approve/reject etc by just right clk and selcting proper menu item form Context Menu.
In case of window style (acrobat.com) menu trader will have to reach to menu instead of getting all options on mouse right clk
I will have to think other alternative wich provides same ease as cotext menu.(God knows what is that )
Once again thanks for suggestion.
Regards,
Dharmendra

I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?

I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?

Welcome to Apple Support Communities
If your iCloud account uses your family's Apple ID, you will pay $20/year for all your family members. If your iCloud account uses a different Apple ID than your family's Apple ID, you will pay only for you

I have an imac OS 10.4.11 and am using Safari 2.0.4. I would like to update this. I have 1 Gb memory. Do I need more memory to update my computer? I would also like to add an airport system and something where I could read word applications.

I have an iMac OS 10.4.11 and am using Safari 2.0.4 I would like to update. I have only original 1 GB memory-do I need more to update?I would also like to add an airport or router and would like to add something where I could open word applications. Is it hopeless?

Thanks. That's a Mid-2007 model with an Intel Core 2 Duo processor. You can run any version of Mac OS X on it up to and including Mac OS X Lion, though for Lion you'd need to increase the memory to at least 2GB, something I'd recommend doing anyway; it's inexpensive and often can increase performance. Your iMac can take up to 6GB if RAM; 4GB is probably a good compromise between cost and performance with a 4GB kit costing about $50.00 US from a reliable vendor such as Crucial.
Your system already should have included the Airport wireless networking capability, so all you'd need would be a wireless (WiFi) access point (aka "router" or "base station") and an appropriate Internet connection. Apple's Airport Express and Airport Extreme, and the Time Capsule if you'd like to have a built-in hard drive for backups and extra storage, are good choices for a WiFi access point, but there are a number of other manufacturers.
As to upgrading the operating system, as I said, you can upgrade to Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, or Mac OSX 10.7 Lion (the most recent release). Apple no longer lists Mac OS X 10.5 on their web site, but if you call the Apple Store you may still be able to purchase a copy. Mac OS X 10.6 Snow Leopard is easily available as is Lion though with Lion you'd need the $69.00 USB flash drive installer or you'd need to purchase and install Snow Leopard first (other than on the flash drive, Lion is only available from the Mac App Store which can only be accessed from Mac OS X 10.6.6. or later). Before you decide, I'd strongly suggest you find out what versions of Mac OS X your applications and perpherals will support, either as they or with a free or affordable update. I'd suspect most of your applications and peripheral drivers would need to be upgraded, at least to support Snow Leopard or Lion. If you consider Lion, make sure of your applications; Lion will no longer run PowerPC-only applications, so many older appliations will not run under Lion.
Finally, as to Microsoft Word documents which is what I presume you mean, you can of course just purchase Microsoft Office. There are other ways to work with Word documents, though. If you just need to view Word documents, TextEdit in MOSX 10.6 and 10.7 (and perhaps 10.5; I can't remember) can open and view many Word Documents. For something a bit more capable, you can purchase Apple's Pages, part of the iWork suite and now available separately for Mac OS X 10.6 and 10.7, or try one of the open-source solutions such as LibreOffice.
Regards.

2010 Macbook pro is running slow in Mavericks. Do I need more than 4gb ram?

My late 2010 13" 2.4Ghz Intel Core 2 Duo Macbook Pro is running slow since upgrading to Mavericks. I currently only have 4gb of ram. When I boot up It takes quite awhile (nearly 5 minutes or more) before the system is usable. Or it takes almost as long to switch to another user. Once I let it sit, it runs fine. I'm mostly using Safari and possibly MS Word at any given time. I looked at the Activity monitor and I believe I'm using aboiut 3.6 - 3.9gb of physical memory and over 4gb of virtual memory. Swap is using 0 at all times.
Do I need more RAM? Wipe my drive and do a fresh install? I'm reluctant to do the latter, because I don't want to have to reinstall all of my apps (even witha TM backup).
Thanks all

Thanks Linc for any help-
Hope I didn't paste too much. Uninstalling CleanMyMac has already helped some. Here goes:
2/3/14 12:14:36.075 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.076 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.083 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.084 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.085 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.085 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.152 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.152 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.153 AM secd[356]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.153 AM secd[356]: securityd_xpc_dictionary_handler Keychain Access[395] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
2/3/14 12:14:36.346 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x2fd] flags: 0x8 binding: FileInfoBinding [0x48b] - extension: jpg, UTI: public.jpeg, fileType: ????.
2/3/14 12:14:36.349 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:48 scale: 1
2/3/14 12:14:40.061 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x231] flags: 0x8 binding: FileInfoBinding [0x3e1] - extension: pdf, UTI: com.adobe.pdf, fileType: ????.
2/3/14 12:14:40.062 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pdf, UTI: com.adobe.pdf, fileType: ???? request size:48 scale: 1
2/3/14 12:14:40.883 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x3fb] flags: 0x8 binding: FileInfoBinding [0x15f] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
2/3/14 12:14:40.884 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:48 scale: 1
2/3/14 12:14:42.496 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x191] flags: 0x8 binding: FileInfoBinding [0x409] - extension: xls, UTI: com.microsoft.excel.xls, fileType: ????.
2/3/14 12:14:42.555 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: xls, UTI: com.microsoft.excel.xls, fileType: ???? request size:48 scale: 1
2/3/14 12:14:42.799 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x281] flags: 0x8 binding: FileInfoBinding [0x32f] - extension: doc, UTI: com.microsoft.word.doc, fileType: W8BN.
2/3/14 12:14:42.926 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: doc, UTI: com.microsoft.word.doc, fileType: W8BN request size:48 scale: 1
2/3/14 12:14:46.228 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x51b] flags: 0x8 binding: FileInfoBinding [0x343] - extension: htm, UTI: public.html, fileType: TEXT.
2/3/14 12:14:46.229 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xc03] flags: 0x8 binding: FileInfoBinding [0xb03] - extension: htm, UTI: public.html, fileType: TEXT request size:48 scale: 1
2/3/14 12:14:46.756 AM com.apple.IconServicesAgent[407]: main Failed to composit image for binding VariantBinding [0x51f] flags: 0x8 binding: FileInfoBinding [0x299] - extension: xml, UTI: public.xml, fileType: TEXT.
2/3/14 12:14:46.762 AM quicklookd[409]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xe03] flags: 0x8 binding: FileInfoBinding [0xd03] - extension: xml, UTI: public.xml, fileType: TEXT request size:48 scale: 1
2/3/14 12:14:59.191 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:14:59.321 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:15:00.358 AM WindowServer[141]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
2/3/14 12:15:01.036 AM WindowServer[141]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 1.68 seconds (server forcibly re-enabled them after 1.00 seconds)
2/3/14 12:15:36.961 AM NetAuthSysAgent[447]: handleStreamError: stream error domain: posix error: 60
2/3/14 12:15:50.059 AM SecurityAgent[470]: MacBuddy was run = 0
2/3/14 12:15:50.123 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:15:52.153 AM parentalcontrolsd[475]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/3/14 12:15:52.733 AM SecurityAgent[470]: User info context values set for JASON
2/3/14 12:15:52.983 AM SecurityAgent[470]: Login Window login proceeding
2/3/14 12:15:53.237 AM sandboxd[101]: ([474]) storeagent(474) deny file-read-data /Users/JANINE/Library/Preferences/com.apple.WebFoundation.plist
2/3/14 12:15:53.244 AM WindowServer[141]: Session 256 is switching to console
2/3/14 12:15:53.255 AM Dock[397]: CGSCopyDisplayUUID: Invalid display 0x003f003d
2/3/14 12:15:53.256 AM Dock[397]: uuid_callback_master: failed to retrieve UUID for display 0x003f003d (1001) (invariant failure)
2/3/14 12:15:53.272 AM WindowServer[141]: Session 256 retained (2 references)
2/3/14 12:15:53.281 AM WindowServer[141]: Session 257 released (1 references)
2/3/14 12:15:53.488 AM airportd[63]: _doAutoJoin: Already associated to “XXXXXXX”. Bailing on auto-join.
2/3/14 12:15:53.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:15:55.308 AM WindowServer[141]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/3/14 12:15:55.338 AM WindowServer[141]: Display 0x04273140: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
2/3/14 12:16:08.120 AM spindump[462]: Saved diag report for powerstats version com.apple.SystemStats.Daily to /Library/Logs/DiagnosticReports/powerstats_2014-02-03-001607_Bielski-MacBook-Pr o.diag
2/3/14 12:16:09.114 AM spindump[484]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-02-03-001609_Bielski-MacBook-Pr o.diag
2/3/14 12:16:10.401 AM spindump[486]: Saved diag report for powerstats version com.apple.SystemStats.TopPowerEvent to /Library/Logs/DiagnosticReports/powerstats_2014-02-03-001610_Bielski-MacBook-Pr o.diag
2/3/14 12:16:32.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:17:52.335 AM warmd[19]: [__warmctl_evt_desktop_up_block_invoke:499] Desktop up bcstop timer fired!
2/3/14 12:20:52.788 AM SecurityAgent[491]: MacBuddy was run = 0
2/3/14 12:20:52.926 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:20:55.909 AM SecurityAgent[491]: User info context values set for XXXXXX
2/3/14 12:20:56.362 AM SecurityAgent[491]: Login Window login proceeding
2/3/14 12:20:56.735 AM WindowServer[141]: Session 257 is switching to console
2/3/14 12:20:56.765 AM WindowServer[141]: Session 257 retained (2 references)
2/3/14 12:20:56.766 AM WindowServer[141]: Session 256 released (1 references)
2/3/14 12:20:57.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:20:57.290 AM airportd[63]: _doAutoJoin: Already associated to “XXXXXXX”. Bailing on auto-join.
2/3/14 12:20:57.974 AM parentalcontrolsd[499]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/3/14 12:20:58.773 AM WindowServer[141]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/3/14 12:20:58.900 AM WindowServer[141]: Display 0x04273140: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
2/3/14 12:21:14.958 AM com.apple.preference.security.remoteservice[511]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:14.978 AM com.apple.preference.security.remoteservice[511]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:15.247 AM WindowServer[141]: disable_update_timeout: UI updates were forcibly disabled by application "System Preferences" for over 1.00 seconds. Server has re-enabled them.
2/3/14 12:21:16.084 AM Dock[397]: find_shared_window: Invalid depth WindowID 0xbb
2/3/14 12:21:16.520 AM com.apple.preference.security.remoteservice[511]: Bogus event received by listener connection:
<error: 0x7fff7eaebb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7eaebe60> { length = 18, contents = "Connection invalid" }
2/3/14 12:21:17.004 AM WindowServer[141]: common_reenable_update: UI updates were finally reenabled by application "System Preferences" after 2.76 seconds (server forcibly re-enabled them after 1.00 seconds)
2/3/14 12:21:25.403 AM System Preferences[502]: view service marshal for <NSRemoteView: 0x7ff1c9440660> failed to forget accessibility connection due to Error Domain=NSCocoaErrorDomain Code=4099 "Couldn’t communicate with a helper application." (The connection was invalidated from this process.) UserInfo=0x60800066bd80 {NSDebugDescription=The connection was invalidated from this process.}
timestamp: 00:21:25.402 Monday 03 February 2014
process/thread/queue: System Preferences (502) / 0x10b346000 / com.apple.NSXPCConnection.user.endpoint
code: line 2940 of /SourceCache/ViewBridge/ViewBridge-46/NSRemoteView.m in __57-[NSRemoteView viewServiceMarshalProxy:withErrorHandler:]_block_invoke
domain: communications-failure
2/3/14 12:21:27.128 AM com.apple.preferences.users.remoteservice[515]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:27.147 AM com.apple.preferences.users.remoteservice[515]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
2/3/14 12:21:27.914 AM com.apple.preferences.users.remoteservice[515]: Bogus event received by listener connection:
<error: 0x7fff7eaebb50> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff7eaebe60> { length = 18, contents = "Connection invalid" }
2/3/14 12:21:35.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:22:03.403 AM launchservicesd[53]: Application App:"System Preferences" asn:0x0-41041 pid:502 refs=7 @ 0x7fd3e3c62950 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x44044 pid=522 "SecurityAgent"")), so denying. : LASSession.cp #1481 SetFrontApplication() q=LSSession 100019/0x186b3 queue
2/3/14 12:22:03.403 AM WindowServer[141]: [cps/setfront] Failed setting the front application to System Preferences, psn 0x0-0x41041, securitySessionID=0x186b3, err=-13066
2/3/14 12:23:24.677 AM SecurityAgent[527]: MacBuddy was run = 0
2/3/14 12:23:24.793 AM WindowServer[141]: _CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/3/14 12:23:28.985 AM SecurityAgent[527]: User info context values set for JASON
2/3/14 12:23:29.193 AM SecurityAgent[527]: Login Window login proceeding
2/3/14 12:23:29.446 AM WindowServer[141]: Session 256 is switching to console
2/3/14 12:23:29.471 AM WindowServer[141]: Session 256 retained (2 references)
2/3/14 12:23:29.471 AM WindowServer[141]: Session 257 released (1 references)
2/3/14 12:23:29.677 AM airportd[63]: _doAutoJoin: Already associated to “XXXXXXX”. Bailing on auto-join.
2/3/14 12:23:29.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****
2/3/14 12:23:30.726 AM parentalcontrolsd[537]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
2/3/14 12:23:31.491 AM WindowServer[141]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
2/3/14 12:23:31.542 AM WindowServer[141]: Display 0x04273140: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
2/3/14 12:24:08.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0x5400 ****

Need more space! Is external hard drive an option??

New to atv. Bought 40g model. Now going on vacation and need more space for more stuff. Can external hard drive be hooked up via USB and accessed through atv??

Can external hard drive be hooked up via USB and accessed through atv?
Not without voiding the warranty. No publicly available device is officially supported by that USB port.
(39095)

WE NEED MORE CELL TOWERS!!!!!!

Similar Messages

Maybe you are looking for