We Need Some Developer Recognition Here
Forgive me if I missed something of this sort, but it seems to me that we need some sort of "About the Developers" page. Looking around, I have very little idea of who the devs are anymore, and I think they need more recognition for their work. Just throwing this out there, it's a feeling I've had for a while.
Gah, I've been proven an idiot within 10 minutes. Oh well, it's happened before.
EDIT: LOL, now I get the joke behind Iphitus' avatar.
Last edited by arew264 (2008-08-17 17:03:56)
Similar Messages
-
Hi all i need some guide over here ^^
HI,
i doing BDCbdc for FB60 and i will need to run 1 more BDC before i PARK the doc.
The first BDC is to set the company code to 1000
But there is a problem if the company code in FB60 is 1000, then the BDC i run will fail.
IF the company code in FB60 is 1234 ad i try to set it as 1000, the BDC will run success.
therefore i think of a way, is there any way that i will able to know what is the company code in FB60 WITHOUT looking at the company code in FB60.
Is there a method that BDC can validate the company in FB60.
e.g
IF (company code in FB60) = 1000.
perform ........
else.
perform .......
ENDIF.
Points will be awared
Thanks,
guanweihi thanks for reply,
i know about this but what if the company have many company codes and once the BDC run.
the BDC have to check now the FB60 is 1000 or 1234 because different company code using different vendor. this is why i need to validate now the FB60 is using 1000 or 1234.
because there are too many company code, and if i have to set the company code in FB60 manual everytime it will become troublesome.
In FB60 transaction the system first promt for entering the company code
this will only happen when never use FB60 before, after you have set it to 1000, next time try to go to FB60 again it will not Promt to enter company code. it will use the last company code you have set.
that is why i need some guide on how to know what is the company code it using now by not going into FB60 itself.
Thanks
guanwei -
MSI Pro-E Chipset Cooling (Need Some Major Clarification Here Before I Begin)
Hey guys, about to bring up a very well known issue here, which brought about many 'heated' debates, no pun intended :P I know there has been many threads on this issue for nearly 2 years now, and well, i did tons of reading on the subject, starting with this classic thread here: https://forum-en.msi.com/index.php?topic=126885.0 and various others. I'll try and keep this as short as i can and get right to the point. I know what needs to be done, and the method i will be going with (though i am still debating with some options on the final decision), so i wont even bother going into all of that and save myself and you guys some time here. I am quite certain that HU16E has seen more than enough of these threads, and that every time he sees one, he probably gets a brain ache (sorry man )
But basically, i want to remove the stock heatsink on my X58 Pro-E mobo, and replace BOTH the NB and SB heatsinks. This is something very simple to do, take maybe no more than half hour to get it all removed, put the new TIM on, reseat it, etc, and i am all done. The only problem is having to gut the system and put everything back, which takes even longer to do and is something i am not looking forward to doing, but i am just not comfy with an idle temp of 78c-80c, so i want to take care of all this asap. Yes, i know that is under Intels specs, and yes, it IS working, but i haven't even bothered to play any games on this new system yet, because i know if i was to fire up a power hungry game, that the temps would be well over 90c, and that is just NOT GOOD.
What i want to be sure of, and the main question here, is do any of you know, FOR CERTAIN, which heatsink will fit this mobo without any blood, sweat, tears, tedious modding and cussing up a storm and throwing temper tantrums? Or even worse, getting the heatsink and having it not fit at all? That is something i want to avoid, as it just wastes more time having to send it back, look for another and just creates more hassle. If i do decide to actually hacksaw the heatpipe that links the stock NB/SB together, well at that point, there is no going back, and when i go to put the new heatsinks on and they wind up not fitting, i am basically screwed and wont be able to use the pc for days until finding the right one, so again, i want to avoid all of that.
In that thread i linked to above, he mentions he used that Thermalright NB heatsink, but the problem here, is that he was using the Eclipse mobo, which is not the one i have. I seen some others in that thread saying that they had the PRO-E, but never went into enough detail that they used that same heatsink. It seems like it would fit ok, but 'seems' isn't good enough, and i need to be certain it would. Looking in the system right now, i can lower the gfx card to PCI-E slot 2, to make even more room, so shouldn't be a problem i would think.
But then i came across this thread, and found it quite interesting: https://forum-en.msi.com/index.php?topic=129044.0
Now this person used that Thermaltake Spirit 2 NB cooler, but it seems Thermaltake yanked that off the market, because the link to newegg in the thread, now shows it OUT OF STOCK/DEACTIVATED. Also if you go here:
http://www.thermaltakeusa.com/Product.aspx?S=1231&ID=1901 and click the pic of the old Spirit 2, it then leads you here: http://www.thermaltakeusa.com/Product.aspx?S=1231&ID=1901 , so they obviously recalled the other one for whatever reason. I am guessing because that one was copper, and this one is aluminum and also smaller and virtually do the same job as the other. This one seems really nice and would definitely be the one i would like to go with, since it has a 40mm fan on it all in one, unlike the Thermalright, which doesn't come with a fan (but can use an 80mn fan as well with the mounting contents it comes with). Based on what i have been reading about this issue, if i reseat everything properly, use AS5 and make sure the fans are blowing properly, this Thermaltake heatsink should have virtually the same effect as the Thermalright would. Of course, this leaves the SB completely exposed, which leads to me part 2 of this person's post. He linked to this NB/SB cooler, which is just about the same size as the stock SB cooler, and he 'claims' it fits just fine:
http://www.xoxide.com/enzotech-cnb-s1l.html
There is also another model by the same company, which has a small fan on it too:
http://www.newegg.com/Product/Product.aspx?Item=N82E16835708006
The first one would definitely fit, at least where the gfx card is concerned, albeit, barely. Not sure if the one with the fan would, but then again, based on all that i've read so far, that seems like overkill, since the SB doesn't get hot at all, only lukewarm at this point, and a decent heatsink is all that is really needed. However, i say this person 'claimed' it fit, 'supposedly', because he never posted pics when asked about it, and then disappeared from his own thread shortly after. And what spoiled the whole read for me, was another person posting this:
"The enzotech low profile heatsink will not fit on the south bridge because the hole to hole diameter is too large for it to match up against the mounting holes of the south bridge on the x58 boards.
The Enzotech CNB-S1L has 2 possible hole-hole diameters: 54.6 mm and 59mm. However, the mounting holes on the mobo are only 49mm apart. So the Enzotech heatsink designed for the northbridge will not fit on the south bridge.
If you somehow managed to make it fit, please post pics."
So yea, now i can't be certain that heatsink would fit on the SB, and if this guy was telling the truth, if he did his own modding to force it to fit, or what. Yes, i can hacksaw the pipe off, and leave the stock SB heatsink there, but...i figure if i am going to replace one, i may as well replace the other while i am doing all of that. Like i said, i don't want to have to find out it doesn't upon installing it, because that is just unnecessary time being wasted.
And there you have it, guys. Now, i am no expert at all when it comes a lot of this stuff, as far as certain technical aspects go, but many posters here really know their stuff and from what i have read here and on other forums, i feel like a total noob sometimes lol. So all this boils down to, and what i really need to know, is will all the heatsinks that i have outlined here, fit this motherboard properly? I really need to take care of this asap, because this thing running at 78-80 all the time is really going to lower it's life span, and every second that it does, is just one less second of use. Maybe that is being a lil too dramatic, but still, i've seen so many get their temps down to the low 40s and 50s, so i know for sure this board DOES NOT need to be running that hot :-/
On another note, i noticed many saying they wanted to add nuts/washers or whatever, to give better stability and contact. Well, since as i am as bad as it gets with carpentry, measuring, etc, i have no damn idea which ones i would need. I once was asked to measure something long ago when i worked as a laborer for a carpenter and reported back, saying to him '2/3s'. The guy looked at me like i had two heads lmao. Fortunately, i can read a ruler/measuring tape much better now lol, but i'm still no Norm, from This Old House. I hear all this talk of 'spring mounts', 'push pins' 'mounting holes', 'screws', etc. Since i am unable to see the back of my mobo right now (only the CPU area from the other side of the case panel when removed), i have no idea if its using metal screws, or push pins, or what. I see the heatsinks i mentioned here, as well as many others, use these various methods, so im uncertain what would work on this board (if it needs plastic/nylon screws or metal ones). Now, i checked out this youtube vid of a guy showing how to remove my exact mobo and reseat it with new/better paste. It was quite informative. Just so you guys know, i have the older 'brown colored' Pro-E board. The one in the video looks to be the same color. However, i just purchased this board, along with the whole system less than 3 weeks ago, so i don't know how old this Pro-E may be.
Another important question about what this guy did in the vid too. You can fast-forward to where he takes it apart. Looks to me like they are metal screws, but again, im unsure if mine use those. The front of the heatsinks have two holes, those of which i can easily see, and have what looks to be a plastic washer or something on it. It looks 'greyish'. Now, A VERY IMPORTANT issue in this vid, is this guy removed the THERMAL PADDING on the heatsinks. I read here all over the place, that you are NOT SUPPOSED TO DO THAT, as to ensure that the heatsinks aren't touching any components on the board, the chipset itself. As you can see in the first couple comments, the guy says 'Yes, the existing pads were scraped off. It's important to remove the old thermal pads, otherwise you won't have any benefit & it may even be worse.' So yea. all that does is just confuse me more. Considering how gunked up, though, that the paste will be when removing it, i can only image that the stock pad on there is probably gonna be pretty nasty as well too, which is why he probably took it all off. But yea, wondering if you guys could clarify that for me, if that should be done or not. Seems many here were very firm that it should NEVER be removed.
I can honestly i never have had an issue with MSI until now, and they do put out quality products, but i hope in the future, that newer mobos would use better TIM and have a fan added on the NB or something. Other manufacturers do this, some don't, but they ALL should, so i am not just singling out MSI here. We live in an age where technology is very capricious and always progressing, and back in the day, well, PCs didn't require crazy amounts of fans, watercooling, etc. But with things putting out so much wattage these days, apps/games/movies requiring better hardware, which also needs more power and/or outputs a lot too, well you don't have to work for NASA to know that heat is going to be a problem, and the motherboard being an obvious vital component, should be adequately cooled just as well as everything else that needs it. I do love this board, and it does more than enough to suit my needs, i just wish it didn't run so dang hot That's the ONLY gripe i have about it.Hey, HU16E, and others,
I just wanted to let you know that i finally broke down and attempted this procedure (after a lot of hesitation), and everything worked out perfectly as you said, WITHOUT having to buy some aftermarket chipset cooler. Maybe it was meant to be for me, because i learned a crap load of things in the process and in the end, it wasn't as hard or grueling as i thought (although 1 process was, which ill get to shortly lol).
Once i finally got everything gutted (well, just the stuff attached to the mobo), i then removed it, and hit a wall, because the screws that hold down the chipset heatsink, wouldnt fit any phillips head screw drivers had, so i had to stop, run out and buy a lil six pack of VERY small philips and flat heads. I had assumed during my extensive research on all of this, that those screws used the 6-32 size, which is pretty much the smallest i could find out there. Many pointed out the RC/Model Airplane hobby shops, but nothing i could find out where i live. Those 4 screws differ from everything else in the case. I thought they would be the M3 type screw (6-32), which on the wiki for pc-screws, had said they were commonly used on most mobos. But anyway, i got those off with the right screwdriver, and that was where the 'grueling' part came in.
The NB heatsink came off after 5 minutes of careful wiggling/rocking/twisting to the left and right. I never once PULLED UPWARD, until it was VERY LOOSE, in fear that i would crack the NB die, because if that happened, well, the mobo would basically have become nothing more than a good coffee cup stand). The SB took about 20 minutes since it was cemented on there pretty good. I had to use a wrench and lock both sides of it on there, and then again, just twisted to the left n right carefully, because my hands/fingers were too big to get a grip on the heatsink it uses. Finally, it came off, and i was good to go, but my goodness.....
...not to sound to harsh here, but man, that original paste it had was just terrible, HU16E. This Pro-E i have is the brownish colored one, and so, it had this pink, bubble gum stuff, that was VERY sticky and hard, and i can now see why these heating issues were taking place. Also, the HS itself wasnt as tight as when i finally put it all back. I used alcohol and qtip swab, and also your toothpick method of scraping from the outside, in, to form a clump, which worked well, but the thinner residue afterward was a real hassle to get off there, both on the HS and the NB die/SB surface. Used a butterknife on the HS, but only soft and non-metallic stuff on the NB die, and just kept wiping with alcohol and a microfiber pad for what felt like an eternity until it just basically dissolved and got that nice mirror finish. I used 4 of the 6-32 washers between the stock screw/spring/washer, and believe it or not, it fit very well. It's not loose, the screws head doesnt go through it at all, and once it was scerwed in nice n tight, there was no play at all, so it worked out really well. I mean, at most while it was loose, was probably just a micro millimeter of space while it was around the screws shaft, but again, once it was in there it was tight as can be. I used Arctic Cooling MX-4, since it one of the best out there and i liked the fact it was non-conductive. From what i have read about pastes, metallic-based compounds just arent necessary in this day and age anymore. Also replace the paste on the CPU cooler too.
So i fired up, and well...checked the bios temps, and there ya have it. Went from 82 degrees, down to 48! That definitely made it all worth it. Now i can finally do some gaming/hd content without having to worry about it going into the 90s. It hasnt even exceeded 60 on load, so all is well for sure Also have an antec spot fan set on medium and aimed right over the NB and added a 200mm fan on the top of case, acting as exhaust, so im sure that all plays a part too.
Honestly, though, i really hope MSI is NOT using that paste anymore, because it really is just....well.....ill just say it's BAD lol. It sure as hell would work awesome for some kind of adhesive or glue that is for sure lmao. Maybe MSI should hold onto to that stuff, and give the glue market some competition lol. But yea, as a thermal compound, umm...i just sure hope they switched to a good type of paste for all their future mobos, especially the z68s. I also don't believe that the NB/SB heatsink ever needed a combo type deal, via the heat pipe, as this just creates more tedium. Heck, i dont even think the SB even needs a HS on it, as it doesn't even give off much heat at all. Mine is barely lukewarm to the touch. Not to mention, when taking it off, the heat pipe tends 'move/bend' a bit, and this means the heatsinks on either side will not match up well, or be perfectly parallel when you seat them back on the board. I had to keep bending it gently and standing it on my table til all 4 pegs on the bottom would touch, this way i would know that it'd reseat properly. I hope in the future that MSI will scrap that whole linked HS set-up.
As i stated before, love the board, and the TIM issue was the only issue i had with it, and now since that is resolved, i have no gripes whatsoever. Down the line, ill probably get a z68 soon, and wouldn't mind at all going with MSI, but id like to be assured first that some changes were made to the chipset cooling, because even though this was all a good learning experience for me, it is not something i want to go through again lol.
But hey, thanks a bunch for all of your advice HU16E and other mods as well. I was going to go with that Thermalright HS, and your posts (past and present) convinced me otherwise and the temps are down to what others got them to WITH that same aftermarket heatsink, so you saved me 30USD -
BdAqua, anyone.. I need some SERIOUS advise here..
For many of you I have been on these forums for quite sometime and now I am in need of SERIOUS advice. With the acquisition of a Power Mac G5 Quad taking over most of my everyday activities which I do on my mac pro, I am in desperate need of trying to figure out how I can get the best out of my 2009 mac pro of which I worked so hard in making it a 6-core 2010 machine.. Now I am thinking I might have gone overboard, way overboard as I am not making use of the machine and its fullest potential. I don't have really a lot of income coming in right now as I am unemployed, though I am getting a pension and unemployment, but not enough to buy serious applications for taking advantage of the power in my mac pro.
Can someone advise on how I can get the best out of my 6-core mac pro without having to spend 1000's of dollars on stuff I may or may never ever need? Other than video editing, is there any other way I can get the best out of using my machine for what its intended for? Here is what I currently use my mac pro for, thus far:
1. Everyday stuff, browsing internet, forums, emailing.
2. sometimes I will burn two dvds/cd's simultaneously, sometimes not.
3. Retro gaming though I do have some older modern games I play from time to time.
4. I had bootcamp installed, but no more as I can do most of the work I need on the OS X platform.
5. When I ever get dvds, I rip them using handbrake just to take advantage of all my cores, even though mactheripper is much faster and only uses some of the cores.
As of right now most of the above I do on my newly acquired Power Mac G5 Quad and my mac pro is on the floor, disconnected and not being used. The problem is that I got the mac pro because of its expandability and I realize my BIGGEST MISTAKE here was that it is in no way a consumer type machine, but for many years I have used desktop macs for my purposes and expansion.
This is my only intel mac, as my PB G4 is being used for my mobile computing and does everything I throw at it, Power Mac G5 does also what I through at it. The G4 Pismo is only used for OS 9 nostalgia to if I ever have a yearn to retro back to the beginning days of OS 9
Question: With my limited amount of funds, what can I do to get the best out of my Mac Pro?? I don't want to sell it for something cheaper or less, as I really do love the expansion capability of the mac pro and its case for prolonging the system. I don't plan on getting a future mac pro as for what I use it for it certainly would be a waste.
I know I have been rude to some of you and I know its been a rocky road between all of you on this forum and me, but I am now in a desperate, precarious position.. What really can I use my mac pro for other than using it like my PM G5 Quad? I am starting to also think the Quad is overkill, but nevertheless, I have a love for both Intel and PowerPC. And yes, I plan on getting Lion as I do want my mac pro to keep up with at least software and updates to the OS.
Thank you!
RomkoLOL, I think the G5s are already obsolete & a Legacy Mac as far as Apple is concerned, yet MHz per MHz they can still compete favorably with the right SW.
>Ok, can the G5 Quad still do good with elementary audio and video software?
Yes.
>What do you think? The mac pro makes a good server?
Oh yes.
>I do plan on getting Lion when it comes out for my mac pro however.
I wish I could comment on Lion, but NDA, NDA, NDA.
>Also, is it true I won't be able to charge an ipod touch with the G5's USB ports?
No iPods here, but Macs have traditionally been weak in USB amperage, I'd think if all else fails an AC powered USB hub would vertainly cure it.
>Define obsolete?
No longer supported by Apple... so what's new?
Right now Leo/10.5.x is still fairly well supported, but when a new OS hits I expect that to stop.
BTW, we're not llowed to speculate here, so call that a blind guess! -
Goshh, need some help over here!
hi everyne.
need help.
U insert a number e.g ( -12 ) the operation will be: (-1) + 2 = 1
e.g : - 42 = (-4) + 2 = -2
I cannot find a way to do that.
here is the code for simple sum:
int sum = 0;
int aux;
int digit = 0;
System.out.print("Insert a number: ");
int num = Teclado.intLido();
aux = num;
while(aux != 0 ) {
digit = aux % 10;
aux = aux / 10;
if(digit > 0) {
sum += digit; when i say "digit > o " this digit is the second one, because the first is always positive.
So i need help to find a way to tell the computer if the second digit is negative it will deduct. e.g -12 -> (-1 ) + 2 = 1
Anyone could tell how to tell the computer if the second digit is negative or positive. I cannot find a way to tell that.
thanks!
Joshwhat about num / 10 + Math.abs(num % 10) ?
:D
i know and with strings and length () to count the digits will be easier too.
But i can't use Math.abs etcc string length() etc.. just loops :P
Just wanna know how to tell the computer if the second digits (from right to left) is neg or pos. if neg (-12) (-1) +2 = 1 or (-41) = -4 +1 = -3
using this method with something else.
while(aux != 0 ) {
digit = aux % 10;
aux = aux / 10;
if(digit > 0) {
soma = soma + digito;
}else if (digit < 0) {
// this line is wrong because i want it to see if the SECOND digit is < 0 and not the first which is always positive.
sum = sum - digit;
Do u know what i mean? -
Definately Gonna Need Some Advanced Help Here...
Hey guys, I've had an iPod video for about a year now with minimal problems, but all of a sudden it messed up. The screen just shows random lines and different shapes in different colors, but when I move the click wheel, I can still here that clicking sound thingy that it makes. I've already tried resetting and restoring my iPod and neither has worked. Please someone help me. I NEED MY MUSIC!!!
They will repair the iPod if there does not appear to be accidental damage. If the iPod itself does not have a crack on the LCD screen on the front, perhaps it was the inner screen. (If that makes any sense.) Sometimes, if the inner screen breaks you will see shapes with colors and such as you mentioned.
Are you within the 1st year of owning the iPod? If you are, I'd recommend setting up for a repair (as long as it wasn't caused by accidental damage (as mentioned by Johnathan Burger).
http://depot.info.apple.com/iPod -
Ajax experts need some urgent help here....
Hello eveyone,
I am new to Ajax and have been fiddling with it for the last couple of days. I am trying to get a dropdown filter to work. I have managed to sort out the filter for the frist dropdown using a Ajax script but cannot get the second drop down to work. I am not too sure to write the correct Ajax syntax. My question is on the second dropdown, how can I pass the id for the first onChange event and the second onChange event...
Here is my explanation on what I am trying to achieve,
When a user selects Student Name from the frist dropDown, then the onchange event runs the Ajax script
and filters the second Dropdown and displays all the exams details by the student name selected above. The code works fine uptill this point.
Now, when I select the second dropdown, I want it to take the value of the frist dropdown and the second dropdown and
then filter the third dropdown. I do not know the correct syntax in Ajax on how to pass the onChange event on the frist two dropdowns.
Here is my html dropdown code:
<tr><td>
//This is the first DropDown
<select name="studentID" id="studentID" onChange="ajaxStudentID(this)">
<option value="0" selected>Select...</option>
<%=student.getList(stuForm.getStudentID())%>
</select>
</td></tr>
<tr><td>
//This is my Second DropDown
//This basically filters the list and gives a dropdownlist of Exams taken by the value returned
//from the method stuForm.getStudentID()
<div id="examDropDownList">
<select name="examID" id="examID" onChange="ajaxExamID(this)>
*//My question is on this change even, how do I write the ajax function to get this ID and the previous onChange ID*
*//which is "ajaxStudentID(this) in the frist dropdown*
<option value="0" selected>Select...</option>
<%=exam.createList(stuForm.getStudentID(), stuForm.getExamID())%>
</select>
</div>
</tr></td>
//This is my Last DropDown
//This basically filters the list and gives a dropdownlist of Exams Passed taken by the values returned
//from the method stuForm.getStudentID() and method stuForm.getExamID()
<select name="passID" id="passID">
<option value="0" selected>Select...</option>
<%=pass.createList(stuForm.getStudentID(), stuForm.getExamID(), stuForm.getPassID())%>
</select>
</tr></td>Here is the Ajax script I am using:
<script>
function registerAjaxStuff() {
ajaxEngine.registerRequest( 'ajaxStudentID', 'dropdownlist.jsp' );
ajaxEngine.registerAjaxElement( 'examDropDownList' ); //This is the div, I want to run
function ajaxStudentID(selectBox) {
//var id = selectBox.options[selectBox.selectedIndex].value;
var id = selectBox.value;
//alert("groupid = " + id);
ajaxEngine.sendRequest( 'ajaxStudentID', "id=" + id);
registerAjaxStuff();
</script>Here is the dropdownlist.jsp page that runs the Ajax and gets the values for the second dropdown..
<%response.setContentType("text/xml");%>
<%@ include file="header.jsp" %>
<jsp:useBean id="examList" class="student.DropDown"/>
<%
examList.useDb(db);
int id = utils.servletUtils.isNumber(request.getParameter("id"),0);
%>
<ajax-response>
<response type="element" id="examDropDownList">
<select name="examList" id="examList" onchange="ajaxStudentID(this)">
<option value="0">Select</option>
<%=examList.createList(id,0)%>
</select>
</response>
</ajax-response>My Question is I want to write a function that passes two parameters, the onchange event of the second dropdown which I know how to do it but I also want to pass the selected value of the frist dropdown which I do not know how to do?In your javascript, get the <select> element by id (document.getElementById('studentID'), and call 'selectedIndex' for the value that is selected in the dropdown:
var studentIdValue = document.getElementById("studentID').selectedIndex;
{code} -
Hi, need some assistance over here.
Hi guys, can i check with you guys wha
t does this source code means?
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/halo" creationComplete="init()" minWidth="1500" minHeight="1000" height="859">
<mx:DataGrid x="19" y="368" id="playlistgrid" width="289" height="147">
<mx:columns>
<mx:DataGridColumn headerText="Name" dataField="name" width="180"/>
<mx:DataGridColumn dataField="starttime" headerText="Start" width="50"/>
<mx:DataGridColumn dataField="endtime" headerText="End" width="50"/>
<mx:DataGridColumn dataField="livesource" headerText="DVR" width="50"/>
</mx:columns>
</mx:DataGrid>
<mx:DataGrid x="20" y="38" id="sourcegrid" width="289" height="126">
<mx:columns>
<mx:DataGridColumn headerText="Name" dataField="name" width="200"/>
</mx:columns>
</mx:DataGrid>
<mx:Label x="18" y="16" text="Source files (on Demand)"/>
<mx:DataGrid x="20" y="195" id="livestreamgrid" width="289" height="74">
<mx:columns>
<mx:DataGridColumn headerText="Name" dataField="name" width="200"/>
</mx:columns>
</mx:DataGrid>
<mx:DataGrid x="17" y="570" id="outputgrid" width="289" height="207">
<mx:columns>
<mx:DataGridColumn headerText="Name" dataField="name" width="200"/>
</mx:columns>
</mx:DataGrid>
<mx:Label x="15" y="548" text="Exported highlights (for on-demand CDN)"/>
<mx:Label x="18" y="174" text="Live DVR streams"/>
<s:Button x="19" y="312" label="Set In Point" id="setin_btn"/>
<s:Button x="107" y="312" label="Set Out Point" id="setout_btn"/>
<s:Button x="19" y="339" label="Add selected clip to Playlist" id="addtoplay_btn"/>
<s:Button x="21" y="519" label="Generate on-demand file" id="generate_btn"/>
<s:TextInput x="19" y="284" width="83" id="inpoint_txt"/>
<s:TextInput x="106" y="284" width="93" id="outpoint_txt"/>
<s:TextArea x="216" y="284" height="21" id="currenttimecode" editable="false" textAlign="center" width="90"/>
<s:TextArea x="17" y="785" width="370" id="status_txt" fontSize="12" height="63"/>
Despite this source code was copied from the tutorial guide, when i complied it to flex 4, I'm having errors on those line in bold and red.
My question would be,
Firstly, what does this whole source code means? Can any kind soul help me out?
Secondly, what does the error means? The error code reported was :
"Could not resolve <mx:DataGrid> to a component implementation.This mxml-code layouts some flex components... DataGrid is a table like DataContainer which is organized in rows and columns.
The DataGridColumn defines the Data presented in one of this columns. The error you get usally means that you are missing the
import statement for the datagrid-component(import mx.controls.DataGrid;). My advise is that maybe get a book about the new Flex 4 Framework(because a lot has changed and most tutorials, in my opinion, are outdated now) and invest some time to get you head
around the very basics of flex before starting with this web tutorials.
All the best. -
I need some creative thinking here....
Hi all...
Well, at my office I have a mixed network of OS 9 and X... (only 2 old iMacs left..yeah!).... SO... here is how I set up my email...
1) On a G4 I use as a File Server..everyone has a folder... (I use OS X Server..Jaguar genernation)...
2) I simply put a copy of Outlook Express on there. It is OS 9... so even people on newer Macs can access it. The thing is I have an office where people often play musical Macs...which means they have to peole to access their email from ANY Mac in the office...
3) SO.... now I am beginning the upgrade process.. To wean folks off of OS 9... for I predict this year we will have the funding to upgrade the last 2 machines.
4) PROBLEM!!!!!! I tried to do the same thing as I did with MAIL or Thunderbird... BUT as you can imagine... they draw their info frmo folders they stick on the actual computer... Not an IDENTITIES folder like Outlook Express.
SO!!!! What can I do??? Is there a way I can do this so evey person can access their email on any old mahcine they open??? How do I house their account onthe server so this works? Any tricks in the APPS? Somehting in OS X Server??
PLEASE HELP.... (oh... I do not house the actual email accounts... people are just getting them ail from outside servers... from the people who host our domain name...)
THANKS!!!!!!
-johnThanks Joel...
I am setting htis up for OSX use only... it is just for when people all migrate over. I have 2 machines left...
So..being I am using OSX server and OSX machines... I want people to be able to access their mail client from any of the 6 OSX machines we have in the office.
It seems like something I should be able to do (as I am now with OLExpress for OS 9)..but for OSX...
I do not want to use WebMail (we have that capability already..slowwww)
Can't everyone just use Mac's Mail program in the Server folders and access it frmo any Mac??? Seems simple enough... (well..they can access Mail..but WITH their address books, messages, etc)
Anyone????? thanks!!! -
I need some simple help here, worth $1 duke buck
please tell me what I am missing here. Thanks.
//Team Patrick, Stephen, Rich
//Week 3 team assignment due 10/9/03
//Joanne Kuzman instructor
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Cater
public static void main(String[] args) throws Exception
double feeCorporate = 500.00;
double feePrivate = 300.00;
double feeNonprofit = 150.00;
double feeSpecial = 200.00;
double taxRateC = 1.0775;
double taxRateP = 1.85;
char response;
System.out.println("Welcome to Local Caterer's Company Scheduling");
System.out.println("Please choose the type of event.");
System.out.println
("Your Choices are C for corporate events,P for private events, N for nonprofit and S for Special events");
response = (char)System.in.read();
System.in.read(); System.in.read(); System.in.read(); System.in.read();
while (response != "C" && != "P" && != "N" && != "S")
System.in.read(); System.in.read();
System.out.println("Your entry can only be C, P, N, or S");
response = (char)System.in.read();
if(response = "C")
System.out.println("This Corporate event will cost " + feeCorporate " and Pop will manage this event");
System.out.println("The total with tax will be " + feeCorporate * taxRateC);
else if(response = "P")
System.out.println("This Private event will cost " + feePrivate " and Pop will manage this event");
System.out.println("The total with tax will be " + feePrivate * taxRateP);
else if(response = "N")
System.out.println
("This Nonprofit event will cost " + feeNonprofit " and Mom will manage this event");
System.out.println
("Nonprofit events are not taxed. Please be certain to obtan a tax exempt card from the organization and keep it on file");
else if(response = "S")
System.out.println
("This Nonprofit event will cost " + feeSpecial " and Mom will manage this event");
System.out.println("Please see Mom for tax rate on these events");
else
System.out.println("Invalid Entry");
System.exit(0);I am not sure which programming lang u used to program with but in java things r a bit diffrent. you had a lot of small mistakes. anyway your code should look like this (copy paste it and don't worry)
public class Cater
public static void main(String[] args) throws Exception
double feeCorporate = 500.00;
double feePrivate = 300.00;
double feeNonprofit = 150.00;
double feeSpecial = 200.00;
double taxRateC = 1.0775;
double taxRateP = 1.85;
char response;
System.out.println("Welcome to Local Caterer's Company Scheduling");
System.out.println("Please choose the type of event.");
System.out.println
("Your Choices are C for corporate events,P for private events, N for nonprofit and S for Special events");
response = (char)System.in.read();
System.in.read(); System.in.read(); System.in.read(); System.in.read();
while ((response != 'C') && (response!= 'P') && (response!= 'N') && (response!= 'S'))
System.in.read(); System.in.read();
System.out.println("Your entry can only be C, P, N, or S");
response = (char)System.in.read();
if(response == 'C')
System.out.println("This Corporate event will cost " + feeCorporate+ " and Pop will manage this event");
System.out.println("The total with tax will be " + feeCorporate * taxRateC);
else if(response == 'P')
System.out.println("This Private event will cost " + feePrivate+ " and Pop will manage this event");
System.out.println("The total with tax will be " + feePrivate * taxRateP);
else if(response == 'N')
System.out.println("This Nonprofit event will cost " + feeNonprofit+ " and Mom will manage this event");
System.out.println("Nonprofit events are not taxed. Please be certain to obtan a tax exempt card from the organization and keep it on file");
else if(response == 'S')
System.out.println("This Nonprofit event will cost " + feeSpecial +" and Mom will manage this event");
System.out.println("Please see Mom for tax rate on these events");
else
System.out.println("Invalid Entry");
System.exit(0); -
Need Some help in Developing an ALV report ..Plz help me
Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
Tables are VBAK VBAP LIPS LIKP and Document floe table is VBFA
SELECT VBELN VKORG VTWEG SPART
FROM VBAK
INTO TABLE I_VBAK
WHERE VBELN IN S_VBELN.
IF I_VBAK IS NOT INITIAL .
SELECT VBELN POSNR MATKL POSAR WERKS
FROM VBAP
INTO TABLE I_VBAP
FOR ALL ENTRIES IN I_VBAK
WHERE VBELN = I_VBAK-VBELN.
ENDIF.
IF I_VBAP IS NOT INITIAL.
SELECT * FROM LIPS
INTO CORRESPONDING FIELDS OF TABLE I_LIPS
WHERE VGBEL = VBAP-VBELN
AND VGPOS = VBAP-POSNR.
ENDIF.
IF I_LIPS IS NOT INITIAL.
SELECT VBELN VSTEL VKORG KUNNR
FROM LIKP
INTO TABLE I_LIKP.
ENDIF.
Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 5:43 PMhi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar -
I have seen this problem here and other forums but I need some clarity.
Hey-
(Sorry for the quick post, but I wanted to get this out there before I take off across the country so I might have some help when I am in NY by some help on here.)
I purchased my first iPod this past Christmas. it was the iPod Nano 6 gen. I did a ton of research, read many post on various forums, and all the negative comments (except one) I felt I could live without, because I had not gotten use to any configuration of the Nano and the complaints seemed to not affect needing the Nano for exercising.
The main problem with not being able to turn the Nano off or at least get it to a state where very little power was used seemed to be what was causing so much strife among new users. I thought I would read the posts, do some research, read the little manual that came with the Nano and the larger manual online at apple.com and figure out how Apple meant for this machine to be "turned off."
I charged the pup up when I got it, changed my earphones to the new in the earphones and headed off to the gym. Since I had already done a considerable amount of research and played around with it to become familiar with the buttons and all before I it the gym, I felt I was OK to go for a workout. Since this was my very firs iPod, I had some challenges in synching the machine wit iTunes. I think I just need to understand the whole synch process ad probably do it manually. I turned the machine on when I got to the gym, got some tunes playing and hit the sleep/wake button so it would be a dark screen and save as much power as possible. I was actually shocked at how much power was used during the hour workout, especially since I did not play wit it at all during the workout.
After the workout, I had learned from some people who were a bit more patient with finding oiut the best way to get the machine to use the least amount of power until their next use of the Nano. so, I turned the volume all the way down, paused the music that was playing, removed the earphones from the jack, and pressed the sleep/wake button in hopes I would have some power the next time I went to use it, which was the next day. That first workout it used about ½ of the battery icon and when I went to turn it on the next day for another workout I was shocked to see ¼ of the battery still charged.
so, my questions or the main question is, despite all of my research on how the company meant for this machine to be put to sleep in-between uses, despite what I mentioned above what I did, is there any latest new from Apple out about why the battery hold such a crappy charge? Even following what the major Nano manual stated and even Applecare, the battery energy loss between one day was a shocker. I have read where people have not experienced this problem, but my question is does anybody know how Apple recommends that one leave the Nano when it is not in use? I understand it goes into a deep sleep after something like 36 hours, which seems insane to pick 36 hours. Also, if anybody has been able to figure out how Apple has built this machine to be put to sleep, I would really appreciate some help here.
I have heard from many people that they can't have the Nano go to an off position because of the clock but come-on, there are many other tech devices that have a clock and are able to be put to sleep. You can still make a device to be put to sleep and still get the little energy it needs to keep the battery charged.
any help in this area would be greatly appreciated. Let me recap on what I have learned from my research to do when not in use to keep as much energy as possible. First, make sure the volume is all the way down by the sound "waves" are not coming out of the display speaker make sure whatever is playing is on pause, make sue the pedometer is off, unplug the earphones, press the sleep/wake bottom and your good to go until you use it next. However this does not keep my battery from drawing a significant amount of power so that I have a decent amount of power for the next workout. I can't believe this is such an issue when the earlier Nanos had much more uses and must have needed much more power to even keep things working during the Sleep time.
any help would be greatly appreciated.Are you on a dialup connection, using Web acceleration software?
If so, try disabling the web accelerator. Does the download go through for you properly then? -
Need some sample documents for DME development
Hi,
I need some sample documents for DME development. I expect any information covering developing DME formats and steps for downloading a DME file (this I need for checking my formats).
please, send any relevant info you have to mail id mindaugas.kazlauskas at gmail.com
Many thanks and reward points ahead!
Regards,
MindaugasHi,
the main thing is that I need format with payment information structured in single column, like this:
//separator//
value1
value2
value3
//separator//
value1
value2
value3
//separator//
maybe there is any SAP format structured like this?
Regards,
Mindaugas -
Need some tips for Database Developer Role.
Dear All,
Next week, I'm going to face an Interview for Database Developer role.
For this, I need some more & useful information on these recommended points.
1. Involve in a designing part of Data warehouse from
scratch
2. Create complex analytic queries on large data sets.
3. Analyse trends in key metrics.
4. Monitoring and optimizing the performance of the database.
Please help get the vital information on these points.
All help will be highly appreciated.
Thanks,1. Involve in a designing part of Data warehouse from
scratch
Design Database...
This needs lot of information about business and its fonctionnalités, and so many.. Tables, relationships etc...
http://technet.microsoft.com/en-us/library/ms187099%28v=sql.105%29.aspx
Code Design...
SP's, Funcitions, Views, Sub queries, Joins, Triggers etc...
DW Design
DB size and number of reports and historical data details, reduce the normalization and etc....
http://technet.microsoft.com/en-us/library/aa902672%28v=sql.80%29.aspx
2. Create complex analytic queries on large data sets.
Its all based on your current database design, size, required output, data, performance etc..
4. Monitoring and optimizing the performance of the database.
Perfmon, Activity monitor, spotlight, custom queries, DMV's sp_whoisactive, execution plans, and many other thirdparty tools.. and may be best experience will give best view and clarity :)
Note : This is very big topic and its not easy to answer in few words or lines... :) goole it for more details...
Raju Rasagounder Sr MSSQL DBA -
Need some help with GUI development
Hi ppl.. I am new to labview and I am currently involved in a testing equipment development. I need some help. firstly I need to know if multi-screen GUI (with icons and stuff)is possible in Labview. Secondly I need to interface the measurements to a database. Would it be possible to create just small executable to perform the measurement part alone and do the rest of database operation using VB. (or would it be advisable to do the whole lot in labview)
the final sft should look something like this
screen1 :setup screen... interface with database
screen2 :actual test and test results
screen3 :log file creation
measurement is via daq board and i also need to send some control signals and set up TCP/IP for data transfer.Hello.
I am not completely sure what you mean by "multi-screen", but I am pretty sure that doing the user interface using a tab control will work for you. I have attached an example VI which is a state machine (which in LabVIEW you do with a case structure inside a while loop). Notice how the configuration controls are in the first page of the tab control, associated with state 0 of the state machine, but in the block diagram, they are actually used in state 1 of the state machine. Instead of writing a very long description, I will let you take a look at the code (which I saved in LV 7.0 version). Let me know if you have questions or comments
Attachments:
MultiScreenStateMachineExample.vi 50 KB
Maybe you are looking for
-
When I turn on my ipad I get a message that says that I have not backed to the cloud in ywo weeks. I connected it to the computer and it has access to wifi, byt it won't do anything and I can't use it.
-
could some one please tell me what this fatal error means and what I need to do about it? Thank you very much! A fatal error has been detected by the Java Runtime Environment: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x04b80183, pid=4944, tid=
-
Move Palm m500 data to Android phone?
I upgraded to Windows 7 and my palm desktop will not load. I'm using an Android based smart phone, is there a way to transfer this info without hand imputting it from a copy on my old XP? Post relates to: Palm m500
-
SQL Server database details - DBInstanceSummary- Connection Status: Failure
Hi guys, I have a strange problem with Maps 9.0 in the SQL Server database details -> DBInstanceSummary and DBInstanceProperties I got a failure as shown in the picture below. This sounds quite strange because I'm able to collect most of Instances an
-
Universe incomplete on multiprovider
Hi Experts, We need some help here ! I'm SAP BI, but I'm new in BO. I installed BOXI 3.1 with SAP Integration Kit. We already put all the authorizations as the documentation says, and started to make a universe on a top a BEx Queries and directly on