We need to run wb_workspace_management.set_workspace procedure each time

Hi
We appear to need to run wb_workspace_management.set_workspace procedure each time in a new session before running OWB Mappings.
The above procedure is run with values REP_ADMIN/REP_ADMIN and then we are able to successfully run the mappings. However, on opening a new session, if this procedure is not run, the execution of mappings fails. However the values REP_ADMIN/REP_ADMIN are already present in the view all_iv_workspaces in owbsys schema.
Should this procedure be run as the first thing before starting execution of the mappings or is there some other issue?
If the stored procedure is not run this message is displayed.
ORA-20013: The workspace has not been set. Please call wb_workspace_management.set_workspace procedure to set workspace first.
ORA-06512: at “OWBSYS.WB_WORKSPACE_MANAGEMENT”, line 1356
ORA-06512: at “OWBSYS.WB_WORKSPACE_MANAGEMENT”, line …
Any help with diagnosing this issue is greatly appreciated.

Should this procedure be run as the first thing before starting execution of the mappings or is there some other issue?Yes, you need to execute set_workspace procedure for each new opened database session before running mapping or selecting data from OWB public view.
It is OWB requirements starting from 11g R1 OWB release and there are no any workarounds.
But maybe you can include call to set_workspace in OnLogon database trigger (I don't done it and cannot confirm that this works) if you want to avoid manual execution of set_workspace ...
Regards,
Oleg

Similar Messages

Need to run Adobe Customization Wizard every time for each new reader update?

Hi there,
This should be a simple question...
Do I need to run Adobe Customization Wizard every time on each new incremental reader update, or just once per major revision (e.g. Reader 9, Reader X)?

This question hasn't been answered because it would be better asked in the enterprise deployment forum. The Wiz is an ent deployment tool and only is used for initial deployments in most cases. You use it to customize the installer and the product when it's first installed. You could use it for any install, but that is a less common scenario.
Usually, you customize the first version you install and then just apply updates as they are released.
HTH.
Ben

Want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through a long procedure each time

I want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through the long tedious procedure each time I install firefox. It is something that should be in the options tab , and I want to know why it isn't. I am totally frustrated with firefox and getting ready to switch.

You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

Do we need to restart the Tomcat server each time when we modify servlets?

Hi Friends,
Do we need to restart the Tomcat server each time when we modify servlets. Or is there any otherway to achieve the functionalitly?
Thanks and Regards,
JG

JamesGeorge wrote:
Hi kajbj,
Java guys are mostly using TOMCAT,so for me it seems to be the best place.That's not correct. Most people who are writing stuff for the web might be using Tomcat, but there are lots and lots of Java applications that aren't for the web.
Is there any other reason behind your question.Yes, this forum is named "New to Java" and Tomcat questions shouldn't be asked here, even if people knows the answer to you question. You will probably get better and more detailed answers in a Tomcat forum. All othe guys there are actually using Tomcat, and they know the small differences between the different versions, and how they behave on different operating systems. They do also know if you need to make configurations changes, and where you should make them.
So in future, please ask questions in a forum that is specific to the product that you are using.

HT4796 do i need to create a new user each time i do a migration ?

do i need to create a new user each time i do a migration ?

If the computer you are migrating to already has a user the Migration will create a new one.
If not Setup Assistant should be used instead (see Pondini's Guide)

Run the same procedure many times in parallel but no more than 10 at a time

I have a table filled with individual such criteria and want to run a stored pl/sql procedure to run searches on an external server on each of them. The stored procedure deals with the API and the external server can handle the concurrency.
I want to be able to the multiple searches concurrently (ie. run the stored procedure concurrently) but no more than 10 concurrent searches at a time (There are 20,000 searches to complete).
I'm thinking this should involve AQ whose messages call "run once" event based jobs from the Scheduler (I'm running on 10g) but I am very new to Oracle and hence not sure where to begin.
If somebody could fill in my obvious blanks and give me an approach that will actually achieve my end I would be extremely grateful!
Cheers, Kim.

> I'm hoping that each of my "spawned threads" (Jobs)
will insert all outputs into the same table (I don't
mind them waiting on each other as it is the
searching that is the real bottle neck). Is this
going to be a spanner in the works?
Inserts into the same table is not a problem. The typical problem is spawning multiple copies of the same PL/SQL proc to update the same table. Somehow each PL/SQL proc needs to find itself a unique set of rows to lock and process - without impact its fellow processes. Using ROWNUM ranges for example does not work in this case.
The search implies I/O. This is good and bad.
Good in that the only real way to speed up a ton of I/O (assuming that the ton of I/O is non-negotiable and must happen) is to perform the I/O in parallel. I/O is the slowest operation on a db platform due to I/O latency. And this parallel I/O processing exactly what Oracle does with Parallel Query (PQ).
The bad is that more processes means a bigger resource footprint and one needs to figure out just what the optimal size is.
Oracle PQ has a very simplistic mechanism - it allows you to specify the number of PQs that can be spawned (and if on a a cluster, on how many nodes) per table. It also allows you to specify a PQ process pool ceiling.
But this is fairly primitive as you still need to figure out (in some way) what the optimal PQ sizes are per table.
The bad is that you either need to do something primitive and similar to PQ - which means a manual monitoring and tuning - or you need to try and automate it. Which in itself can be very interesting, but complex to develop and often quite difficult to get right.

I want a fresh load with each reload not a page from history i need my changes to show up each time i load a page

I am a web designer and need to be able to reload the entire page fresh each time i make a change so i can test things i just changed on the website how do ni make this happen this was not an issue in the past but now the banners on the site stay the same and they should change with each reload

If you hold the Shift key when you reload (e.g., Ctrl+Shift+r) then Firefox should disregard cached files and re-request everything.
Are you changing the banner URL to prevent use of a cached banner?

HT2845 do I need to pair the magic mouse each time I switch it off.

Do I need to pair the magic mouse each I switch it off, or should the mouse be left in the on position all the time.

It should pair automatically when switched back on. Having said that, I never turn BT devices off unless I am gone for a long time. BT devices automatically go into a low power mode after a short time of non-use.
Barry

Why do I need to download a rental movie each time I want to pick up from when stopped

Why does apple tv store rented movies. Have to re-download each time want watch same rental

The Apple TV does not have accessible storage. It is simply caching the streamed content and once other content is accessed or the device turned off the rental is flushed requiring reload.
If you want to store you can rent on your computer and stream via home-sharing.

HT4623 My ipad2 keeps indicating i need update my ios. However, each time i touch the icon in the setup, it says the software is up to date. What is going on?

My ipad2 keeps asking me to update ios. However, each time i click on the icon in the setup, it says the software is up to date. My ios is version 5.1.1

Are you certain you have an iPad 2? Does it have cameras?

Why do I need to log into my homepage each time I open up firefox.

Ever time I open up Firefox I must log into each of my homepages,AOL, Yahoo, and Comcast. This just started all of a sudden, when I use Internet Explore it works just fine. Please help I hate to use Internet Explore I have been using Firefox for years its been a great product Thanks for all of your hard work. Craig Pelletier.

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
to store new passwords.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

My mail does not come in automatically even though i have it set as auto. I need to click on get mail each time

My email does not come in until I click on get mail. I have the check mail set automatically in my preferences under general. What am I doing wrong? Cheers John

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Need to run the package

Hi friends,
i need to run a package which will send a mail as soon after it runned. I have a package. But i need to run that package for each and every 10 min in a day. For that how i can create a job to execute that package.
As a result of the job for each and every 10 min ill be receiving a mail. How to create a job to execute my package for every 10 min.
Regards,
Mini

Hi srikanth and hoek,
Thanks for your reply.
i dont know why the job is not running and executing the package.
if i compiled the package separately means, i can able to execute it successfully and also im receiving mails correspondingly.
begin
it_check_overdue_issues.email_overdue;
end;But if i tried to execute the above package using a job means, it is not running corresponding to the time and also not receiving emails. This is my DBMS_JOB query that i used, it is compiling successfully without errors, but not working what is wrong with it.
DECLARE
    jobno number;
BEGIN
    DBMS_JOB.SUBMIT(
        job => jobno,
        what => 'BEGIN it_check_overdue_issues.email_overdue; END;',
        next_date => SYSDATE,
        interval => 'SYSDATE + (2/1440)');
    COMMIT;
END;Regards,
Mini

Is it possible to run a script each time a .CSV file is updated?

I am having trouble with a script I am trying to write, which is made up of two parts:
A .CSV file generated by PHP/MySQL whenever an RSS feed is updated. The contents of the .CSV are overwritten each time the PHP runs.
A DataMerge script, written in JavaScript.
What I would like to do is run the DataMerge script each time the .CSV file is updated. Is this possible, perhaps using an Event Listener within the PHP to trigger the DataMerge script? Or am I approaching this in the wrong way? I'm grateful for any thoughts you might have. Thanks, F.H.

I would use Rorohiko's APID ToolKit: http://www.rorohiko.com/wordpress/indesign-downloads/active-page-item-developer/
It has fileChanged event that is sent after the observed external file has changed.
sorry guys for "labouring the point", but I'm working on very advanced project - and I need to know what my tool can or can't do
and in this case - using APID will break point 2.3 of EULA, right ? interaction with external datasource - without user action ?
robin
www.adobescripts.co.uk

Despite of my passwords are saved in the firefox option security, but still when i login i need to enter it each time? i`m facing thing from past one month however, at first it works well. Please help

my firefox browser used to store passwords so i need not to enter it every time i login although passwords are saved (I can see them in Firefox>Options>security) but i need to enter my ID & passwords each time. furthermore i need to rename my computer each time when i login to sites like facebok though i put a mark to remember it.
Please help

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* https://support.mozilla.com/kb/Cookies
* https://support.mozilla.com/kb/Enabling+and+disabling+cookies

We need to run wb_workspace_management.set_workspace procedure each time

Similar Messages

Maybe you are looking for