We need to show User's subordinates hierarchy wise in Reports

Hi,
In CRM OD report Reporting level shows user's upper hierarchy..But we need Subordinates also.How can that be done in Report.

Raju Madari wrote:
Hi,
In CRM OD report Reporting level shows user's upper hierarchy..But we need Subordinates also.How can that be done in Report.Most probably you post in wrong forum. this is Application Development in PL/SQL » Reports forum.

Similar Messages

Site Web Analytics Report Showing Users Logged in as Both UPPERCASE and lowercase domains (SP Foundation 2010)

When looking at the Site Analytics Report in SP Foundation 2010, I see that many users (though not all it appears) have been logged under the 'Top Visitors' section as both "DOMAINNAME\username" as well as "domainname\username". This makes it hard
to get actual counts of hits the visitors have made since they show up in two places on the report. In my case, I always log in using the same credentials (more recently I have had permissions upgraded so log in is automatic), yet I still see that I
get posted for different usage numbers under the uppercase and lowercase instances. Does anyone know why this would be occurring?

Even i am facing similar kind of problem. Some of my users are displayed as DomainName\ID while some are displayed as Lastname, Firstname. I think we need to know the location where these reports are stored.

Need to show popup when the Submit button is clicked for the second time ..

Hi guys,
I have a requirement where i need to show a popup or alert when the submit button is clicked twice . When it is clicked for the first time one method is been called and its process starts. When the user clicks the submit button for the second time they should be shown a popup stating "Submit button already been clicked, please clicked OK to continue".
Can anyone help with this please , its really urgent requirement ?
Thanks in advance

Hi,
I dont have any sample code to give you now. For quick reference, I can advice some psuedo steps to achieve your requirement. I dont have access to JDEV to test this. If any syntax errors then pls correct yourself.
1. Extend Controller since it is standard page ( Refer Anil Passi site for steps to extend seeded ontroller)
2. Write below logic in your Process Request method
super.processRequest(oaPageContext, oaWebBean);
pageContext.putSessionValue("status", "notInitiated");
3. Include below logic in your PFR method
if(pageContext.getSessionValue("status")!=null){
if("notInitiated".equals(pageContext.getSessionValue("status")))
super.processFormRequest(oapagecontext, oawebbean);
pageContext.putSessionValue("status", "initiated");
else
String message = "Display error message as required";
throw new OAException(message, OAException.ERROR);
You may need to import required packages ( Related to OAException).
Remeber, to sumbit the request, user need to refresh the page again so that "status" variable will be refreshed.
Hope it helps.
Thanks
venkat

Need to show No applicable data in the report.

Hi All,
We ave a key figure in the selection screen. And user will enter the value. based on the input, the report has to display less than or equal to the entered value as a result in the output of the report.
Input NIV as 67,169.48 then below results -
If user gives input NIV as 16,544.14 , the below output is showing.
But we need to show zero as result or no applicable data in the report. Is it possible to achieve through FORMULA.Please help on this
Thanks.

Hi Jalina,
Yasemin already asked few questions.
but this is what we may do:-
to create a formula variable and use it for user input. use this formula variable in a formula , if your NIV kf<= formula variable, then NIV KF, else, 0.
then make a condition on this KF, not equal to zero to suppress this record.
regards,
Sakthi.

Need to show a data in weeks for stacked column

I need to show the data broken down in weeks if you choose the start date and end date. I have to show in a stacked column chart. I am trying to show the values if you choose for example last month i need to show it by weeks for example
week user name total approved first approved last aprovedDate totalitemsAdded
week 1 XYZ 3 10/01/2012 10/05/2012 5
week2 XYZ 5 etc etc
etc
week 3
Below is the code and the result i am getting now .
Current Results
UserName TotalApproved
FirstApprovedDate LastApprovedDate
TotalItemsAdded
XYZ 9
2011-11-19 16:56:49.960
2011-11-19 18:18:20.783
2
DECLARE @StartDate DATETIME
DECLARE @EndDate DATETIME
SET @StartDate = '10/1/2012 '
SET @EndDate = '10/31/2012'
;with Items as(
SELECT
UserName = Profile.Description,
TotalItems = COUNT(TransactionID),
FirstAddedDate = MIN(UTCDate),
LastAddedDate = MAX(UTCDate)
FROM Transactiondatabase.dbo.transaction
JOIN Biography.dbo.Profile ON transaction.ProfileId = Profile.ProfileID
WHERE
Data like '%ItemAdded%'
AND UTCDate BETWEEN @StartDate AND DATEADD(dd,1,@EndDate)
GROUP BY
Profile.Description
Approved as
SELECT
UserName = Profile.Description,
TotalApproved = COUNT(TransactionID),
FirstApprovedDate = MIN(UTCDate),--Demo
LastApprovedDate = MAX(UTCDate)
FROM Transactiondatabase..transaction
JOIN Biography.dbo.Profile ON transaction.ProfileId = Profile.ProfileID
WHERE
Data like '%Approved%'
AND UTCDate BETWEEN @StartDate AND DATEADD(dd,1,@EndDate)
GROUP BY
Profile.Description
Select Distinct Approved.*, TotalItemssAdded = sum(distinct Items.TotalItems)
from Items, Approved
Group by Approved.UserName, Approved.FirstApprovedDate, Approved.LastApprovedDate, Approved.TotalApproved
using ssrs 2005

Hi Sunny04,
If I understand correctly, you want to display the data by weeks in a stacked column chart. If in this case, we can add a calculated field named week to display the week name, and then group it. For more details, please see the following steps:
Right-click the dataset to add a calculated field with the values below:
Name: Week
Calculated field: =DatePart(DateInterval.WeekOfYear,Fields!FirstApprovedDate.Value,0,0)
Add Week field to category group area in a stacked column chart.
Right-click Week field to open the Properties dialog box, modify the expression of Label to like this:
="week"&Fields!Week.Value
Add TotalApproved or TotalItemsAdded field to data area in the chart.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Need to show some fields in display mode

Hi, i need to show some fields in display mode for VA02 transaction code( is to change the values) for some particular users. so do we have any user exits for this requirement?
Please answer me. its very urgent.. thanks in advance.
ex: payment terms and freight terms.

you can try this for header level data
MV45AFZZ exit ""USEREXIT_FIELD_MODIFICATION"
code would be like below
   CASE screen-name.
To suppress Pricing total and Cuurency field at header
      WHEN 'VBAK-NETWR'.
*YOU CAN ADD YOUR CONDITION HERE WHICH IF SATISFY THEN *EXECUTE NEXT LINE OR SKIP IT
      screen-INPUT = 0.
      WHEN 'VBAK-WAERK'.
          screen-INPUT = 0
    ENDCASE.
but it depend upon what data AND in which tab you want to hide, like is it at header level or at item level or pricing (HEADER OR ITEM) data each of them have different exit to restrict data modification.
ENJOY SAP.

Query Jump with Navigation ( Sub query need to show same Navigation )

Hi All.
 We have 4 BEx queries in our Dashboard Web Template and each table web items shows 10 rows and remaining with Scorll.
 For Printing ,we have created a query jump for each BEx Query ( same copy query) that shows all the rows detail.
 When i tried to jump from Orginial Dashboard ( From Specific table/Bex Query) with drill down ( Plant by Material ) , the jump query is not showing the same drill down but it showing the default rows ( Plant as per query rows).
 SAP has suggested us its possible to do Query Jump with Navgiation that shows the same drill down path (navigation) in Sub Query as well.
 Am unable to find how to configure that , did search in OSS / Other Forumns But there were no postings on this.
 For me there is no Settings in RSBBS (or) SPRO and tried the Web Address Jump as well to pass the Drill Down Status (or) Navigation. May be iam not looking at right place. We are at 3.1x
 We found some limitations with SAP recommended web printing ( we dont need to discuss about that as per our requirement ), and our users like the Query Jump printing as which we working on now.
 Please inform if this can be possible, if so how.
Thanks
Martin Mouli

Thanks for reply Bhanu.
Its not like just Plant by Material.
I would like to do my slicing & dicing on Navigational block with any combinations ( Customer by Plant by Material )
When i do query jump from My Original Web Table , my jump query need to show the same drill down ( Customer by Plant by Material)but its showing only Material. ( Which is a default row in sub query)
To show the same navigation in jump query as well, right now am doing drill down again in jump query as well. Its time waste to repeat the same drill down steps in sub query.
By default my Jump Query has Material as row and We will show Plant & Customer on Demand (free characteristics)
Please inform if more information required.
Regards
Martin Mouli

We used to only need to enter a password to login, but we need to enter user name too now. how can we only enter password?

we used to only need to enter a password to login, but we need to enter user name too now. how can we only enter password?

Open the Accounts or Users & Groups pane of System Preferences and set the login options to show the list of users.
(67582)

EWA reporting: Not showing User Activity and Transaction Activity

Hello everyone!
Got 3 systems in EWA reporting, 2 systems works fine i can see User and Transaction Activity with diagrams etc.
But 1 of them showing User activity = 0 and no Transaction activity also.
Any ideias to solve it?

Hi Daniyar,
I am also facing the same problem, can you let me know what sort of patches need to be applied to overcome this issue??
Regards,
BASIS.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.

Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal

I need to show grouped id and only the max order value for each unique id

select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select #Temp1.id, max(#Temp1.[OrderOfVisit]), #Temp1.VisitNote
from #Temp1
group by #Temp1.id, #Temp1.OrderOfVisit, #Temp1.[VisitNote]
ORDER BY #Temp1.id
drop table #Temp1
---I need to show grouped id and only the max OrderOfVisit for each unique id, and the VisitNote for each OrderOfVisit
----------------need help-------------

Sounds like this
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select id,OrderOfVisit,VisitNote
from
select #Temp1.id, #Temp1.[OrderOfVisit], #Temp1.VisitNote,ROW_NUMBER() OVER (PARTITION BY #Temp1.id ORDER BY #Temp1.[OrderOfVisit] DESC) AS Seq
from #Temp1
)t
WHERE Seq = 1
ORDER BY id
drop table #Temp1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Need to show proof of purchase to my insurance company, but my phone was replaced by apple so has a different imei number to the one on my receipt, how do you sort this out??

Need to show proof of purchase to my insurance company, but my phone was replaced by apple so has a different imei number to the one on my receipt, how do you sort this out??

Contact Apple and see if they can provide any documentation of the device swap.

Need to show data related to Process order request , BOM in a smart form

Hi,
I need to show data related to
Process order request
BoM
Now in selection screen we are entering the followings.
Manufacturing Plant ,MRP Controller, Production scheduler, Order type , Order , Material, Sales order, WBS Element,Release,Scheduled start, Scheduled finish ,Selection profile.
how to get 1> Process Order number,Produced Material,Material Description,Print date,Narcotics indicator , Quantity produced , Phase number , Phase description ,Resource description,Standard value to show in a request form.
2> Item category ,Component code,Component description , Component quantity ,Component Unit of measure ,BoM base quantity.
Please help me how to get those values , what should be the aaproach , how to write the select quiry.
Thanks

Hi
To get BOM details, do the following:
1. Use the material number and goto Article to BOM link table (MAST) to get STLNR (BOM).
2. With this STLNR, goto STPO table (where STLNR is the key field). Here you will get all the BOM details like components (IDNRK), UoM (MEINS) etc....
Hope this helps.
THanks
Vijay
PLZ REWARD POINTS IF HELPFUL

Need a sample program for hierarchial oops ALV report

Hello experts,
                 I Need a sample program for hierarchial oops ALV report.

Hi,
   Check the following sample code...
T A B L E S
tables : ekko.
data definition
types : begin of ty_ekko,
          ebeln type ekko-ebeln,
          lifnr type ekko-lifnr,
          bsart type ekko-bsart,
          aedat type ekko-aedat,
          ernam type ekko-ernam,
        end of ty_ekko.
types : begin of ty_eket,
           ebeln type ekpo-ebeln,
           ebelp type ekpo-ebelp,
           werks type ekpo-werks,
           matnr type ekpo-matnr,
           menge type eket-menge,
           wamng type eket-wamng,
           netpr type ekpo-netpr,
        end of ty_eket.
data : it_ekko type table of ty_ekko,
       it_eket type table of ty_eket.
data: ob_hieralv type ref to cl_salv_hierseq_table.
data: it_binding type salv_t_hierseq_binding,
      is_binding type salv_s_hierseq_binding.
S E L C T O P T I O N S
select-options : s_ebeln for ekko-ebeln.
S T A R T O F S E L E C T I O N
start-of-selection.
select ebeln
       lifnr
       bsart
       aedat
       ernam from ekko
into corresponding fields of table it_ekko
where ebeln in s_ebeln.
if sy-subrc eq 0.
select aebeln aebelp
       awerks amatnr
       bmenge bwamng
       a~netpr from ekpo as a join eket as b
                 on amandt = bmandt
                 and aebeln = bebeln
                 and aebelp = bebelp
               into corresponding fields of table it_eket
              where a~ebeln in s_ebeln.
endif.
is_binding-master = 'EBELN'.
is_binding-slave = 'EBELN'.
append is_binding to it_binding.
*TRY.
call method cl_salv_hierseq_table=>factory
exporting
t_binding_level1_level2 = it_binding
importing
r_hierseq = ob_hieralv
changing
t_table_level1 = it_ekko
t_table_level2 = it_eket .
*CATCH cx_salv_data_error .
*CATCH cx_salv_not_found .
*ENDTRY.
call method ob_hieralv->display( ).
Cheers,
Ram

We need to show User's subordinates hierarchy wise in Reports

Similar Messages

Maybe you are looking for