We no longer able to Accept Quotations - iw32
Hi
we are following below Scenario
We create a Notification u2192 and a Serviceorder u2192, to create a Quotation we useu2192 DP80 (billing request)
The cosumer accept the Quote u2192 and you need to accept the Quote in SAP, it will automatically close
Now if we go to accept quotation it is grey out( not possible to accept)
Please suggest how could i accept quotation.
Hello,
Please check whether the quotation is showing in the document flow of the service order or not. Check whether the costs are correctly flown to the quote. Please check the statuses also...
Regards,
SAM
Similar Messages
-
Never done this before. Hope someone can answer my question. My calendar on my iPhone won't show accepted invitations on my calendar anymore. Seems like it stopped working after update last fall
You're welcome. There are many blurred lines with respect to iOS 8 photo management -- i.e. is the photo actually on the device, or only in iCloud? If it is in iCloud only, and you put it into an album on the iPhone, does it get downloaded to the device and is it still full resolution?
Part of the problem may be that there are still some unfinished things with respect to photos. The "iCloud Photo Library" feature seen in pre-iOS 8 release is still in beta form, so whenever that gets full release there could be some sense in all this. There's also the pending replacement of iPhoto and Aperture on the Mac platform, slated to be replaced by a new "Photo" app, so that may play into the big picture on photo management.
But for the time being, I don't feel that the changes to photo management in iOS 8/ iCloud have been for the better. I can only hope that we get a more elegant photo management process with these pending changes. -
My computer has been infected by a Trojan Horse. It has taken over my Mac email account and began sending out malicious emails to everyone in my address book. I cleared out my MAC address book and began using my AOL email account. It took a few days and then my AOL email account was infected and has now been send out malicious email to all my contacts for over a month. It has also infected my iPhone--I am no longer able to send or receive emails on my iPhone. Also, once the Trojan Horse began using my AOL email it completely blocked me from using my MAC account by sending never ending popups asking for my email password to access my MAC email account, but it never accepts my pass word. The TH has also slowed down everything on my computer. It's like I am working on an old PC with dial up connection instead of the high speed digital connection that I have. The little color wheel spins constantly as I wait for sometimes over a minute for a page to pull up. If it pulls up at all. I have tried to use the 2 disks that came with my computer to completely remove everything on my computer and then reinstall all the programs, but I am not allowed to sweep my computer clean. I thought maybe my disks that came with my computer were defective so I called Apple and they sent me 2 new disks. I am not able able to clear my computer with the 2 new disks either. I have done this before successfully so it's not something new to me. I do remember when I believe my computer became infected: I had googled an unusual sewing term, and I was opening what appeared to be legitimate sites, when all of a sudden a pop up appeared that said that my computer had been infected. I immediately shut my computer off, but it was too late. I downloaded a virus program for Mac, and it has never found a virus or problem at all. I think it is part of this Trojan Horse, but I am unable to delete it from my computer. It refuses to uninstall. The Mac Trojan Horse is real and it is terrible. If anyone has any suggestions for me I would be very appreciative,
Beth
vuInstall ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7
1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
C7 Mail for exchange not able to accept invitation...
I am not able to accept invitations via mail for exchange.
I see the icons in the incoming emails that it is a invitation but I am not able to accept it.
I can answer the email but not like on my 61i or N97 that I a accept/deny may emails.
In the product description the functionality is available but he button does not show up.
Any hints are appreciated.Hi hypotenuse,
Thank you for looking at this forum. I will answer you question below, please let me give you the full picture first.
I am a business user and need the MfE urgently and so far I refused to buy a Apple or Google phone (data leaks). Based on Nokia's long experience, I don't understand is why the status of the MfE is so poor. Let me give you some examples:
1) Security Password
After activating MfE I was forced to set security password, including a letter. I thought it is a company rule, but IT department told me they are not requesting this. My colleague is using iPhone, he is not forced to use a letter.
2) Meeting Invitations can't be responded
I have seen you response and I am looking forward to see the next release very soon(?).
3) Hook-off
When the phone is locked by security password (default) and I receive a call I can't access telephony application, e.b. to mute the microphone or to turn on the speakers. I need to enter security password first which is painful.
Here is my wish list for enhacements:
a) Longer standby time. It seems that the phone is consuming a lot of energy in idle mode. I switched off all features, no screen saver, black screen, lowest screen brightness, GPRS only, manual sync only .... and max 3 days between recharging. Maybe not a MfE issue.
b) Simple switch for scheduled/manuel mode (due to a) - maybe via profiles? I think the profile concept has good potential.
c) Top level access to synchronisation command. Due to a) I use manual sync and it would improve usability to have direct access to the sync command. Today I need to open the Options menue and select Sync.Just as an idea, clicking 'Mail for Exchange' at the top could trigger sync.
d) Configurable character size in Mail. In most cases the displayed number of characters of the Email subject does not allow me to understand it. If I could choose a smaller character size of the subject only, I would not need to open the email. -
In IPhoto '08, in Library/Photos, I'm no longer able to view a screen of thumbnails. I'm only able to view a single photo at one time. This was not true in the past.
Note the slider lower right of the iPhoto Window. Drag it left.
Regards
TD -
Imac is no longer able to open the Configuration file
Hi ,
I have an imac ( ilamp) 20' connected to ADSL, via Netopia Router which is connected to the Airport extreme connected to imac, for the PB Aluminum Tiger 10.4.5. we both can connect. PB can print via imac/printer.
The imac is no longer able to open the Configuration file, when i enter the pswd which is correct, i get the message "The Airport Admin. Utility was unable to read the configuration of the selected base station an error occurred while reading the configuration "
My Beau updated Airport to V5.7, this is the first time since the update I've tried to access the conf. file for the imac which i have done numerous times prior.
I have a new base station Ip address 254.128.0 in Airport Utility Admin, on the imac which does not reflect my network settings anywhere, and is not what it use to be, i think, it was one value different than the PB.Base station IP. I do not know how it changed neither one of us changed it.
I tried using the Airport Setup assistant (imac), I received this message:
"Appropriate Airport hardware was bot found on this computer,if you recently
Installed, an Airport card,please shut down your computer$ make sure the card is properly istalled."
The imac does not have a card, nor do i think it needs one.
I would like to be able to at least open the configuration file.
Thank you for reading my post.
Eme
Power PC G4 (3.3) iMac♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.4)Hi Kes, a star for the company !
I made an error on my first post I have a Netopia modem, Airport router.
And so it remains, i guess that there must be an easy answer somewhere
that I am missing that I/we should read, some direction to that would be helpful, and I would be very appreciative.
As I said the password had been set, and it is not an issue of that being forgotten, i wondered if it was changed back to "public" tried, not it.
particular because everytime the imac wakes one of the folders on ( no one else in office just me and boyfriend and it is his work folder he has a copy on the PB.( the folder on desk top has been clicked on, the one with sensitve info, i have backed the folder up and secure trashed it, just in case some security issue hacking has taken place, thats closing the barn door after the fact.
Good luck,w/ this Q.
regards Eme
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5) -
I have snow leopard. Using iCloud, I can receive email on my mac, but, suddenly, I am no longer able to send email from the mac. I can send it from iCloud online. Any thoughts on how to regain the abilty to send email from my mac? Thanks.
Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html -
I am no longer able to double click on a file and have it open. Any suggestions on how to resolve this problem?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
No longer able to open the application on my MacBook Pro since upgrading to FaceTime 1.0.5 (170). The operating system is OSX 10.6.8.
My problem opening FaceTime after the upgrade is now solved. I didn't pay enough attention when prompted to decide where to store the application upgrade and as a consequence the computer created another "Applications" folder within the existing one. When I subsequently clicked on the icon on the dock to open the application the computer couldn't find the software.
Makerfield2 -
iCloud changes my calendar colors. I am no longer able to pick my own calendar colors. This is due to some bug on iCloud. FIX THIS PROBLEM IMMEDIATELY APPLE!!! THIS IS RIDICULOUS. iCloud should not force us to pick calendar colors. We should be able to pick our own!!!!!
Same here, Calender keeps reverting to Purple a color I never ever even picked, screw you iCloud, you continue to annoy me and baffle me with your inadequecies
-
my old email address was hacked and I am no longer able to access it. How can i reset my icloud ID without losing all of my pictures and more importantly contacts? I have created a new ID but i cannot seem to use it until I delete the old account
You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
Have you seen this.
http://support.apple.com/kb/HT5796
iCloud
iOS 6 and later: Go to Settings > iCloud.
If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
If you're still signed in with your previous Apple ID:
Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device. -
I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet
Maybe you are looking for
-
I Need to Create a report for batch jobs Based on Subject Area.
Hi SAP Guru's, I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI). Please help me in this issue ASAP. Thanks in Advance. Krishna.
-
How to stop the timing out of web Discoverer Plus
I was working in Plus, and it drove me crazy that I would loose my work because I kept my session open and it would time out.How to stop the timing out of web Discoverer Plus? Thank you, Olga
-
Authorization objects in cFolders
Hi Folks, I would like more clarity on the following authorization object in cFolders. CFX_APPL - what's the purpose of this object and what are the allowed values for the field APPL_AREA? What is meant by the term "Application area in cFolders" whic
-
How to make WLC 5508-HA controller mantainance mode to HA mode
Hi, I have two wlc 5508 with HA mode, If unfortunally redudndent link disconnected and standby wlc goes to mantainance mode. then again I connected redundent link but second wlc does not come in ha, it still remain in mantainance mode. What is the co
-
Why do I need JSP, Servlets, JSF?
I want to design web pages in HTML and Javascript and use EJBs to handle business logic. That's it. I don't want to learn another API (ie JSP, Servlets, ...) for designing web pages. Is there a way I can access EJBs from Javascript using XML-based me