We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

Similar Messages

  • Send link function no longer works after last update (7.0.1). Has always worked till now. Outlook is set as default email (as before).

    Send link function no longer working since update to 7.0.1. Always worked till now...I use Outlook as default mail client, and have not changed any settings since original setup. This is very frustrating! Any help will be appreciated.

    You can try running the combo updater over your install but you might need to re-install Lion. Both options should not erase your data but if you do the re-install of Lion it's recommended that you backup first as a precaution.
    OS X Lion Update 10.7.5 (Client Combo) 1.91 GB
    http://support.apple.com/kb/DL1582
    To re-install, boot into the Recovery drive and select to Reinstall OS X.
    Hold down Command R when restarting to enter Recovery drive.

  • This Nightly feedback, Steganos password Manager drop and drag functionality no longer works after last update.

    Cut and paste still works but the drop and drag so longer works.
    This for Nightly Beta 64 bit.

    I too have the problem: W7 64 bit. Drag and drop worked until yesterday when I "upgraded" to FF v 26.0 - I can no longer drag passwords etc from my password manager to website fields - a barred circle appears when I try to drag.
    I tried pressing ESC (one profferred solution) and also reset FF to no avail.
    This is more than annoying: some of my passwords are dozens of characters long and there's no way I can access sites by typing them in! I need a solution, even if it's reverting to a previous version.

  • On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

    On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
    They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
    do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
    I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
    Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

    Hi,
    When you start Messages fro the first time you are asked for an Apple ID
    When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
    The App should have also picked on on those iChat Accounst you had before.
    These should be Enabled if they were when you last used iChat.
    Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
    In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
    Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
    This will give you separate iChat type Buddy lists.
    You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
    You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
    I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
    There is no Buddy list for iMessages side
    No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
    Obviously an Apple ID can be an email or look like one.
    In some cases they are also valid AIM Screen Names as well.
    In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
    11:31 PM      Saturday; August 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

    Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

    A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
    -Roger

  • HT202157 Apple TV No Longer Works after the most recent update (2.1.13)

    Why can I no longer access the movies and tv shows I’ve already purchased in iTunes after the update?  It was not until the most recent update as on 2/1/13 that I started having this issue.  Please correct this so I can use what I paid for.  Thanks

    Same problem here, Apple, I'm pretty upset at the moment.  My daughter's 12th birthday, and she wants to watch a movie we purchased through your software.
    We love the normal apple usage...but, since your hardware and software are so stringently ruled...I have some expectations on the fact that it will actually work after the updates.
    Customer service outside the apple store has been suspect for some time. 
    Please step up here, we've invested quite a lot in you, and we're feeling a bit let down at the moment.
    No notice, no warnings, for all the messages you do send out, "hey the stuff you bought from us and can only play it back on us isn't going to be working for a while"...would be nice.
    Or just fix it.
    Scott West

  • Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

    md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

    If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

  • Headphones no longer work after ios8 update to Iphone 5

    My plug in head phones no longer work after updating to IOS8.  I thought it was the head phones and bought new ones - they don't work either.  I updated my iPad and both head phones work.  Phone is IPhone 5 - not due for an upgrade until December.  Any suggestions?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • Scrolling on Magic mouse no longer work after OSX update

    I have just performed an OSX update and after restarting I immediately noticed that the scrolling function and other gestures no longer work on the magic mouse. I have also noticed that no gestures work on the Mac Book Pro track pad. The only function that works on the mouse is moving the mouse pointer and the buttons. Same goes for the track pad. Some great update that was. Has anyone else discovered this and how do I repair this loss of function? When I first initiated the update, I saw that there was a download required which mention some improvements for the mouse/keyboard but mainly updates required to support the new magic track pad. Is it possible to revert this individual update and if so how? Thanks.

    You were almost correct, but not quite. You can see updates in /Library/Updates. I'm not sure what receipts is, but it didn't contain the track pad/mouse update package I was expecting to see. However, I did eventually find it in Updates after a trip to my local Apple store. What happened was that the original update process completed about 95% but for some reason crashed. When I restarted, it appeared that there was nothing wrong, until that is I tried to use the mouse and track pad. I presume that the update process uninstalled the previous package but didn't actually install the new update. I downloaded the the latest update from Apple, but it appeared to be older than what I downloaded from the Update process, so it wouldn't install. I would suggest that here lies a bug. The package install process did detect the new trackpad / mouse package but it didn't detect that it wasn't installed and should have prompted me to install it.

  • Multi room DVR no longer works after latest update

    I just recieved an update on my 2 DVR's and now the multi room function no longer works.  I no longer see the other DVR's recodings.  When I try the verizon auto dvr fix it locks up and freeses and says to try again later sometime.  Anyone else get an update and loose multi room function?
    Solved!
    Go to Solution.

    Thanks finally worked after the 3rd time of rebooting everything.

  • Cisco VPN no longer working after firmware update

    I have been using the Cisco VPN network connection to access work; after the recent update, both my Macs stopped working -- no changes have been made.
    Is this a known bug? I looked at the settings, verified everything with no luck.
    Thanks.

    See http://discussions.apple.com/thread.jspa?messageID=12800407&tstart=0. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

  • Shuffle function no longer works after upgrade.

    After upgrading the software on my 3GS phone to 4.2.1 the shuffle function in the feature no longer worked. The same song played over and over again. The solution was super easy. On the home screen choose Settings > General > Reset > Reset All Settings. Unlike a restore none of your current data or media will be lost. Only took a couple of minutes. I had to set a few personal preference settings again like my ring tone and wallpaper, nothing major. Just a few taps and everything was back to normal. Hope this helps anyone having a problem after upgrading.

    You could also tap the album artwork while the song is playing and turn repeat off.
    http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf

  • Nano no longer working after the 6/28 update? Read this!

    I bought a 2gb Nano yesterday. Plugged it in, all was well. Early in the morning I received a message telling me there was a new update, so I applied it. It restarted then iTunes would no longer see it. I reset it, nothing. Tried to restore it to the 03/23 update, nothing. sigh
    Perused these forums and found a solution that worked:
    http://discussions.apple.com/thread.jspa?threadID=417486&tstart=0
    In a nutshell I went into Control Panel, Computer Management, then Disk Management. I reformatted the Nano, disconnected it then did a repair install of iTunes. I went back and installed the 03/23 updater and applied it - everything was fine.
    This evening when I returned home I plugged the Nano into my Mac then applied the 6/28 updater and it's worked fine.
    So....if you're having problems with your Nano since applying the 06-28 Updater then you might want to try this one. There is mention in one of the threads of Apple Support telling people to do the same.
    Good luck!

    none, it worked.

  • IPhoto (9.6) No longer works after Yosemite Update! Please Help. The error message I get is below.

    Error Message:
    "Your photo library is either in use by another application or has become unreadable.
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
    I have performed the instructions above with the exception of the restoration from a backup.(Option/Command no longer yields a menu. Just the error message again).  Really hoping there is a fix outside of the restoration since I have neglected to back up for some time.
    P.S. I see that this is happening to others....I have another Mac to update to Yosemite and fear the same results.

    Every time there is an update to anything someone somewhere has an issue. That's why backing up prior to updating is so important.
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Maybe you are looking for