We stopped receiving event about lockout users after we installed rollup 4 for tmg with sp2

We have implemented Account Lockout Feature in TMG 2010 (http://www.ntsystems.it/post/ActiveSync-ForeFront-TMG-and-AccountLockoutThreshold.aspx). We configured
alert definition to send alert when problem occure. After we installed rollup 4 we stopped receiving event about this probloem ("The limit of consecutive logon failures has been reached...."). How can we resolve this problem? We have implented
a script which send this information automatically to user with problem. This is very important for us.
Event description:
Source: Microsoft Forefront TMG Web
Event ID: 32581
Level: Error
Text: limit for consecutive logon failures has been reached. Additional logon attempts by domain.local\user.name will be automatically rejected for the next 300 seconds

Hi,
Before going further troubleshooting, we should confirm if account lockout works fine now.
Please refer to the article below to check some limitations on this function.
http://blogs.technet.com/b/isablog/archive/2012/11/01/using-the-account-lockout-feature-in-tmg-2010.aspx
Is there any other different information after you install Rollup 4? Or what something else do you change during update to RU4?
Best Regards
Quan Gu

Similar Messages

Custom agent stops receiving events after long period

What would cause a custom agent to stop receiving events?
I have two custom agents that register to listen for events from PublicObject. These agents run along with some custom timed-based agents in a ServerManager instance.
After about eight days, events are not being sent to the custom agents. The timed-based agents run fine after this period.
I have observed that if the CUPServer is running this will stop events being sent to the custom agents. The CUPServer was not running for the above case.

I can't think of anything that would cause that.
Do you want to post your code, and see if anyone detects any problems?

User's default email address for use with Answers

How to use user's default email address for use with Answers?
When I was referring to the Admin Guide I found the below description for email session variable.
Can somebody please help me with this.
Contains the user's default email address for use with Answers. If the delivery option of Answers is enabled, an email device using this address will be created for the user upon first log in. Users can override this address by changing their account settings in Oracle BI Presentation Services.
Thanks,
Swetha

I think the documentation is wrongly saying that it will be used by Answers. The email will be used by Delivers, the BI Scheduler component.

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"

After i installed updates for my mac mini server, the web services for the server app wont start, it gives an error massage: "Error Reading Settings"
The system logs reads:
Mar 29 22:06:25 server servermgrd[82]: servermgr_web: Error Domain=XSServerFoundationErrorDomain Code=4 "Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass
          ." UserInfo=0x7fc547901080 {NSLocalizedDescription=Failed to read settings: Exception:
          undefined method `downcase' for nil:NilClass

To check the local network for some of the common configuration problems, launch Terminal.app and issue the following diagnostic command:
sudo changeip -checkhostname
That'll report some local configuration information and then either no errors detected and no changes required, or it'll point to whatever configuration errors or issues it might detect. That doesn't catch everything, but it catches the common errors.
FWIW, 192.168.0.0/24 and 192.168.1.0/24 are poor choices for the local network, as VPNs are based on IP routing and IP routing gets tangled when the same subnet is used on both ends of the VPN. 192.168.0.0/24 and 192.168.1.0/24 are near ubiquitous in home networks and coffee shops.

Receive Connector stopped working after Update Rollout 2 for Exchange 2007 SP2

One of the Exchange 2007 servers receive connector has stopped working since installing the latest rollout update for Exchange 2007 SP2 - for some reason the following error is received (when troubleshooting on the adjacent server) :
"Remote server server.domain.co.uk failed the mail acceptance test. MAIL FROM command: Respond = 530 5.7.1 Client was not authenticated."
Most admins will know you usually get this when first setting up Exchange and the receive connector not allowing anonymous connections. But our setup has been working for well over a year with no problems. Even enabling anonymous connections still doesn't fix the problem.
Our setup is 2 exchange servers across 2 sites, with the problematic server never receiving email from the internet, only from the other Exchange server (which is internet facing). The above error is received when the internet facing server is relaying email over to the problematic server. Though in the message queue the following error is received:
"SMTPSEND.DNS.NonExistantDomain; nonecistant domain"
After testing DNS that all seems fine, so I don't believe it's a DNS problem.
Any ideas why this would happen?
Thanks,
Matt

Hi Matt....
To receive e-mails from the external servers or domains or clients, you can setup a new receive connector on Hub Transport Server. To do this task, you can go through the steps mentioned in this blog....
https://mailsolutions.wordpress.com/2015/02/06/resolving-error-530-5-7-1-client-was-not-authenticated-with-receiver-connector/
Hope this will work
Thanks

How do I go about receiving messages from iphone users after switching to a android

I am unable to recieve messages from my husband after switching to an android. could you please help me to fix this. I just turned the imessages off on my old iphone, someone told me that works, or fixes the issue? PLEASE HELP!!!!!?????!!!!!!!

If he is an iPhone user it will send a iMessage to u because that is what his phone is use to so he will have to hold his sent iMessage down and click send as text message and it should send to ur new phone hope it helps

My .mac email account stopped receiving messages about 4 hours ago; I can send successfully. Is Apple having a "mail" problem, or do you have suggestions for me. I have checked the setup and have also deleted and re-added the account. Thank you

Not working on Mac Air (Mountain Lion), iPad 3 (iOS6) or iPhone 4S(iOS6); was working until 4 hours ago.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Can I migrate data from "old" user account to new user after clean install?

I've just done a clean install of Snow Leopard on a MacBook Pro (I erased system drive before install). I've upgraded SL to 10.6.2 using a generic administrator account. And I have an exact bootable clone of my old data (SuperDuper backup on external drive).
I don't care about migrating all my old software; I'll reinstall it. But I would like to migrate system preferences, mail accounts, iCal calendars, and keychains etc. And some silly part of me wants to REname my username. (Also: I can't use Setup Assistant or Migration Assistant because some part of the old image has Microsoft Entourage hooks in Mail and MobileMe that I want to get rid of.)
So here's my question: if I create a new account with the NEW user name I want to start using, can I STILL then copy over my old data? I don't know which of the below stuff has my old user name embedded in the data. Here's the list:
Your data in ~/Documents
~/Library/Application Support/AddressBook (copy the whole folder)
~/Library/Calendars (copy the whole folder)
Also in ~/Library/Application Support (copy whatever else you need)
~ /Library/Keychains (copy the whole folder)
~/Library/Mail (copy the whole folder)
~/Library/Preferences/com.apple.mail.plist *This is a very important file which contains all email account settings and general mail preferences.
~ /Library/iTunes (copy the whole folder)
~/Library/Application Support/Safari (copy the whole folder)
~/Library/Application Support/iMovie (copy the whole folder)
~/Pictures/iPhoto library
~/Music/iTunes
~/Movies/iMovie
Thanks for any input! I know a lot of people here have done clean installs, so I appreciate anything you can share.

santranyc wrote:
I've just done a clean install of Snow Leopard on a MacBook Pro (I erased system drive before install). I've upgraded SL to 10.6.2 using a generic administrator account. And I have an exact bootable clone of my old data (SuperDuper backup on external drive).
I don't care about migrating all my old software; I'll reinstall it. But I would like to migrate system preferences, mail accounts, iCal calendars, and keychains etc. And some silly part of me wants to REname my username. (Also: I can't use Setup Assistant or Migration Assistant because some part of the old image has Microsoft Entourage hooks in Mail and MobileMe that I want to get rid of.)
what exactly do you mean by that? you can use Migration Assistant to migrate your user only (no applications). that should most likely suffice and i don't think Entourage will be a problem. you'll have to delete various entourage folders in your documents folder afterward if you don't plan on using it anymore.
So here's my question: if I create a new account with the NEW user name I want to start using, can I STILL then copy over my old data?
yes, as bdmarsha said, your user name is not mentioned anywhere in your home directory.
I don't know which of the below stuff has my old user name embedded in the data. Here's the list:
Your data in ~/Documents
~/Library/Application Support/AddressBook (copy the whole folder)
~/Library/Calendars (copy the whole folder)
Also in ~/Library/Application Support (copy whatever else you need)
~ /Library/Keychains (copy the whole folder)
~/Library/Mail (copy the whole folder)
~/Library/Preferences/com.apple.mail.plist *This is a very important file which contains all email account settings and general mail preferences.
~ /Library/iTunes (copy the whole folder)
~/Library/Application Support/Safari (copy the whole folder)
~/Library/Application Support/iMovie (copy the whole folder)
~/Pictures/iPhoto library
~/Music/iTunes
~/Movies/iMovie
Thanks for any input! I know a lot of people here have done clean installs, so I appreciate anything you can share.

About the Error after applying product key for bing search rest service

For the Project Siena I ve created the product key for Bing search rest service and i applied that product key which is valid even though i got the error when i click TRY button .can anyone please help me to find the solution
There was an error in retrieving sample data. Error : Unable to reach service. Please check if your service connector configuration is valid and you have network connectivity

Hello,
Thanks for your post. I am jotting down few steps to get the Bing search account key (you may have completed many/all of these).
To add Bing Search Service, go to
https://datamarket.azure.com/account/datasets and search for "Bing Search API". After you have subscribed to the service, navigate to "My Data" and click on Use. Click on Show and copy the
Primary Account Key information.
Note if your key contains a special character like / or = then double clicking on the content will copy the key partially.
Make sure you have copied the full key correctly. If the is incorrectly pasted in Siena's Primary Account Key field, you will get the error below:
This is similar to the error you have posted. Since the Primary Account Key is masked you can never be sure the contents are correct. It's best to clear the field and paste the key again.
If you still face the issue, please post your machine configuration (x86/OS) information.
Hope this helps,
-Karthik
This posting is provided "AS IS" with no warranties and confers no rights.

FireFox has stopped working and will not run after fresh install

Yesterday I noticed that the address bar was not working and the graphics were not being shown correctly. When I typed in the address bar it would no atuto complete and even if i typed yahoo.com nothin would happen. The only way I could go to a website was to use my bookmarks.
I did a fresh install and now it doesn't work at all. So, I uninstalled firefox and then did a fresh install. Sill nothing. IE, Chrome, and Safari work fine.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

Does anyone recommend an after market car stereo for use with iOS?

I'm looking to replace my existing car stereo and would like to know if anyone has had any luck with after market?

Hey,
No Firewalls running no.. Well no software ones, just the hardware one in the DM602.
Incidentally I managed to find another DM602 user who said to me that the Modem / Router in 'Modem Only' mode works fine.. just using the Airport Express/Extreme set up as the router.
Will have to wait and see once I have bought the Airport Express as Modem Only mode without another Router caused me all kinds of confusion and left me unable to connect to the net or even to the Modem/Router directly when I was fiddling around with it.
But yeah, I agree that it's odd that Mac make everything else BUT the modem to connect to an ADSL line.. and then recommend rubbish 3rd party hardware that wont allow it's customers to use it's own well designed software..
Bit annoying.. you try and be a good Mac disciple and model consumer - Mac all the way, and still run into grief..

Question about Formatting Buffalo USB 1TB external drive for use with Mac Book Pro Mountain Lion HD

Hi there, Have Mountain Lion HD operating system (not sure if it is 10.8 or 10.8.1. or 10.8.2) and have a Buffalo USB 3.0 1TB hard drive. When go to utilities to try and format with Mac OS extended, following 3 files show. DriveNavi. exe, Slm.exe and Mac. The option to left click and erase menu is not there. Or at least not as shown in all the help videos.
It is USB connection so will take ages but want to use drive to store video footage and also partition to back up Time Machine. ( travelling in South America and no other Ext Drive option available too buy) how much space should i assign to Time Machine when partitioning? Is there anything else i need to think about? as new to formatting. Any thing else i can do to make process of transfering footage to Buffalo quicker?
Final question is if it is finally reformatted am i going to have to spend so long accessing footage from hard drive when back home and editing that it really is not worth if, and i should just write this off as an inappropriate purchase, and try and buy more memory cards and not bother with transfering/storing? Thanks in advance for time spent trying to assist.

Use Apple's Disk Utility in the Applications/Utilities folder to format the drive.
The programs on the drive given to you by the manufacturer is likely backup software (or malware) and essentially worthless, it will be wiped when you format the drive.
I do NOT advise you partition that drive for TimeMachine, rather I advise you not to use TimeMachine at all for your purposes because TM is just a backup, not a bootable drive.
Rather do this.
Get another hard drive that is equal to or slightly larger than your boot drive.
Format the drive in Disk Utiltiy > 1 Partition, option: GUID, Format: OS X Extended journaled, click Erase and move the slider one spot to the right and click Erase. This will take some time as it's going to map off any failing sectors it can BEFORE you lay data on the drive corrupting it.
Next, pay for and download Carbon Copy Cloner, use the default settings and simply clone internal drive to the external drive. this will also take some time the first time.
Next use Disk Utility to Repair Permisisons on both drive. Now reboot the machine and hold the option key down, you can select the external drive clone to boot from!!
You can update the clone the same way by using CCC, but it doesn't take as long, only copying changes.
This is better than TimeMachine as a bootable clone is bootable in case your internal drive fails to boot the machine.
Use the first drive for storage and be very gentle with it while it running, like you should do for all hard drives as they are subjective to shock damage.
The objective with the clone drive is you keep it safe, and not carting it around where it can be more subjective to damage like the other drive will be.
Remmeber you need 2 forms of hardware backup at all times.
Most commonly used backup methods

My mac pro crashed. Apple genius people said to reinstall snow leopard. I did and it failed to start after i installed. I started with the power button, tried to install upgrades, and now I get only a grey screen with spining wheel.

How can I restart a mac pro that shows only a grey screen with a spinning wheel. I reinstalled snow leopard (10.6.3) over 10.6.8 because apple genious people said I had problems with my library files after a time capsule crash. I reinstalled but when done I got only a blue screen. I restarted with the power button and tried to insall 10.6 combined upgrades. I got an error message that it could not install because of an error. When I powered down and tried to restart, I get only a grey screen. My optical drive does not open so I can't restart from another source.

Restart, holding down the mouse button. That should eject the disc. Zap the PRAM and Reset the SMC. Then, pop in the install disc, restart with it in again, select your language, and, when the menu bar pops up, select Disk Utility from the Utilities menu. select the boot volume and repair the disk.

No action after click install (8i for window 2000 server)

I tried to install Oracle 8i EE on the PC with Pentium 4 1.6G CPU and 512MB DDR SDRAM,the platform is Windows 2000Server.I started the autorun program and clicked install,but there is no any action afterward.
Is it possible that hareware issue affected the installation? Because I can install Oracle 8i on another PC with Pentium 3 and 512 SDRAM,the platform is also Win 2000 Server.
Does anyone experience such an issue? It is very helpful if you have answer to the problem.Thank you very much.

I'm having exactly the same problem!
Dell Inspiron 8200 notebook - P4 1.6Ghz, 512Mb DDR Ram, GeForce 4 MX 440.. Thought it was a software thing, but even after a totally clean install of win2kpro with no drivers, it won't run..
Trying to install sybase, which uses jre1.2.0 (instead of 1.1.x that oracle installer uses), I get an illegal exception, so it seems to be some sort of hardware incompatibility with older versions of java, but my efforts to change the vers of jre that oracle installer uses haven't managed to work so far..
I've done the same install on 50-60 P3's and Athlon's and never had a single problem :(

After Effects render constraints for .mov with h.264 codec maximum dimensions 2000px x 2000px?

Is there anyway I can create .mov container with h.264 codec with dimensions 3840px by 1080px? When I try rendering from AE it lowers dimensions to under 2000px. Same thing happens when I try to save as from Quicktime. Programs I have access to are Premiere Pro, After Effects, Adobe Media Encoder, and Final Cut.
Thank you for your help.

Yes, It does seem to be mutliple LDCs. They asked for a final output video as 3840x1080. The requirements are this and they finally sent this display.
Basic Requirements
Ensure the resolution of the file (width and height in pixels) matches the specs provided exactly, even small deviations can result in poor quality playback or no playback at all
.MOV animations must use H.264 encoding
We recommend 15fps (frames per second) for animation
File size should be roughly 1 Megabyte per second or less, i.e. a 10 second .MOV file should be 10MB or less.
Thank you for your help, I will ask on the other forum.

We stopped receiving event about lockout users after we installed rollup 4 for tmg with sp2

Similar Messages

Maybe you are looking for