We tried connected to dlink router with wireless printer..struggled..

Hello..anyone there?

2 "Sticky" guides at top of the forum may help>>>
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Video-for-Installing-the-HP-All-in-One-...
http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Network-Printer-Problems-Try-the-HP-Hom...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • Airport refuses to connect to dlink router

    When I try to connect to dlink (WBR-1310) network, Airport gives me a message "There was an error joining the AirPort network dlink" after I enter my password. I created my password with the help of a dlink technician and they have no clue why it would not work. If I do not password protect my network, it works, but I do not want to go unprotected. Any suggestion? Thanks much.
    Yvan

    danycom, Welcome to the discussion area!
    When you say "Airport refuses to connect to dlink router", do you mean that you are trying to get an AirPort Express (AX) to connect wirelessly to the router? Or do you mean that you are trying to get your Mac to connect wirelessly to the router?

  • At wits end trying to set up router with this laptop!

    I am very frustrated trying to setup any router with this laptop.
    I am also trying to run a wired G3 beige (OS 9.1) ethernet connection.
    I have tried both a Airport Extreme and a Netgear WGR614. Both of these routers have worked in the past, but not now!
    Once in a while I can achieve connectivity through the router, but nothing consistent.
    The internet connection works just fine when the router is removed from the network.
    I am well aware that the problem maybe some very simple setting or sequence of operations in configuring the network - but I am very much out of ideas, inspiration, and patience.
    1.Does anybody have any ideas?
    2.Does anybody know of a complete idiots' guide to setting up these routers? (Netgear is NO help)
    3.Is there anything inherently wrong about trying to run a wired G3 with OS 9 and a wireless G4 with OS 10.4 from the same router?

    I would take a close look at possible radio interference, from nearby routers, cordless telephones, microwave ovens, and so on. If 2 routers worked before and now do not, this says something. Have a friend with a wireless laptop try your signal.
    Generally, routers can be default configured and work, although they'll be totally unsecure, which is dangerous. There should be no issues with having an OS9 and OSX computers using the router. Sorry, router settings take a while to learn and are a little different for each brand. Intermittent operation isn't typical of any setting that I know of, WITH THE EXCEPTION that selecting other radio channels sometimes helps.
    As the Rabbit mentions, your computer could have a flaw, so you have to test this by having another wireless user try your signal.
    BTW, I have encountered a consistent problem through the last few OSs of my Airport reception working fine mostly, then suddenly dying with no indication (other than the net stops working). I have to turn Airport off, then on again to get it working again. This is so annoying, I generally use ethernet now.

  • Am I able to use my iphone's wifi to have my desktop pc connect to our router with the usb chord?

    Am I able to use my iphone's wifi to have my desktop pc connect to our router with the usb chord?

    Subscribe to and enable the Personal Hotspot feature if your wireless provider offers it.

  • HP C6180 not responding with wireless print from Mac OS X 10.9

    My Printer does not work with wireless printing from my Macbook Air OS X 10.9
    I tried all the normal stuff I can find.
    The text that is there is: The Printer is not responding.

    Hi XavierMaassen,
    I understand you have a Photosmart C6180 that you're having issues using in Mac 10.9. I'm sorry to hear this has been happening, but I will certainly do my best to assist you.
    I'm wondering how you installed the printer. If you had it installed prior to upgrading to 10.9 that could be part of the problem. There are currently no HP drivers available for this printer for 10.9, so you need to uninstall the HP software and install the printer via the Apple updates. Once you do that you should be able to print normally and scan using 3 different methods.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • I'm trying to set up a canon wireless printer (MG3220) to my iPad and iPhone. I'm using a Motorola modem SBG900. I keep getting the message "no air printer found". What can I do?

    I'm trying to set up a canon wireless printer (MG3220) to my iPad and iPhone. I'm using a Motorola modem SBG900. I keep getting the message "no air printer found". What can I do?

    Update printer with the latest firmware. They need the latest firmware to Airprint.

  • My g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

    my g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

    Yes, when I bought my powerbook and airport and first set it up the chooser showed the HP 842C printer.
    The printer is connected to the USB on the Airport.
    The PB sees the G3 as a server (2 hard drives).
    Do I need to set up the PB as a server on the G3? How do I do that?
    I've tried Apple share, but when I try to connect to PB address or the name the G3 freezes.

  • I need step by step way of connecting my iPad to my wireless printer?

    I need help connecting my iPad to my wireless printer?

    Add to Templeton's post: Never hurts to power down the iPad, count to 10, then turn it on again.  When my iPad loses touch with our printer, we power cycle the iPad, and that normally fixes the issue.  Also review the link in Templeton's post.

  • Network Magic Pro 5.5 keeps dropping my router and wireless printer ...

    ...multiple times per day.
    WIN 7 Pro 64-bit, SP1
    Network Magic 5.5.9195.0-Pure0
    Motorola Surfboard  model SB6120 Cable modem
    Windows Firewall configured by Norton Security Suite 6.2.1.5
    Linksys WRT54G2 router ver.1
    My problem is as stated in the header.  My router needs to have the power cycled multiple times a day because it is dropping my internet access.  This problem did not occur until I purchased in installed Network Magic.  Also, the wireless printer needs to have the cycle powered almost as often.  I've had both the router and wireless printer for more than 2 years and never experienced this problem before installing Network Magic
    I manually changed my MTU setting to 1472 from Automatic.  This has not helped.
    Any other suggestions?
    Thanks!

    From what I know, the network magic software won't affect your internet connection since it is just  a software to use to manage your network. You may want to isolate the problem first. You can try uninstalling the network magic software from your computers and try to observe your connection again.

  • HT3500 How do I connect my iPad to my wireless printer?

    How do I connect my iPad to my wireless printer?

    Your iPad should be able to print directly to your printer if it is an AirPrint compatible model.
    Check this Apple support document to see if your printer is compatible.
    http://support.apple.com/kb/HT4356
    Post back on your findings.

  • I have problem with wireless print HP after iOS 7  !? What can i do

    I have problem with wireless print HP after iOS 7  !? What can i do?!  

    Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

  • TS1398 Is it possible to connect a advent w 10 wireless printer to a iPad,I have tried various apps with no success,

    I Am trying to connect a advent w10 wireless printer to a iPad .i have tried various apps but ,it is a wireless printer not a air printer,,

    Directly no. Though there are applications  that run on your computer that can share the connected printer out to your iPad through a wireless network .
    For Mac look into Printopia

  • Can't connect to DLink router anymore

    I'm connected to the internet with a DSL modem and a DLink router, model DI-524.I had a wonky security system(Net Barrier) on my computer. While online, a Net Barrier window popped up that said I was being subjected to a Ping attack, with 2 options, Ignore or Stop Stream. I clicked Stop Stream and immediately lost my connection. Apparently my computer now thinks my router's IP address was the source of the attacks and will no longer allow me to connect with it. I called DLink and we reset the router and tried typing in the IP address in a browser, but the computer still wouldn't connect to it(I've also restarted the computer and reset the modem). I can connect to the Internet with the DSL modem directly just fine. How can I reset my computer to allow the router connection? Thanks--Terry

    Hi
    Try uninstalling Net Barrier as it seems to have caused the problem. One of its nanny files may be causing the block.
    roam

  • Can not connect All in one 209b to new router for wireless printing....

    Have an HP laptop and All in one priner 209b.  All was working fine, wired and wireless printing.  Then we had to upgrade our ATT Uverse router.  Everything works...even wireless laptop and printer when connected to laptop.  However, can't get printer to printer wireless since it has the old router info.  I used the disk but when it asks to you to pick the printer, I choose the printer but it says printer now found ??? what ???? and this is with the cable connected.  I do not have the wizard on the touch screen but I did reset to factory settings hoping it would load new router info but it does not.  How do you manually enter router into for wireless printing.  Is it best to delete the printer and reinstall as new...wired and then wireless ???
    I am about to call an outsite company and pay the outrageous charge as the help on HP is not working.  Thanks

    Try this utility:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • Need Help Connecting New MacBook Pro with Wireless Network Password

    Hi Linksys Community,
    I would like to ask for your help and advice.
    I recently purchased a new MacBook Pro, OS X, Version 10.8.3.
    I need to setup a password to the wireless internet network (I've successfully done this)
    I have a Wireless G,  WRT54G Router. 
    When I setup the password, I'm not able to connect to the internet with my new MacBook Pro, which is running Mac OS X Version 10.8.3.  I get the message 'cannot connect to Internet, connection timeout) However, I'm able to connect to the internet with an older MacBook Pro, and my iPad. The password works fine with other models.
    Would anyone be able to help me troubleshoot what is going on, or how I can solve this problem?
    I would like to be able to have a password on my network, and use the internet with my new MacBook Pro.
    I have read about manually adding in the MAC address of computers, and setting up a Wireless MAC fiter.
    Does anyone think this would solve the problem?  if so, how can I find out the MAC address of my MacBook Pro?
    Thanks in advance for you help and time!

    Hi,
    Thanks for your response.
    Yes, my computer connects when your network is open (no password set)?
    I used WPA Pre-Shared Key.
    Do you know how I could check if my new MacBook Pro is compatible with this?
    Thanks!

Maybe you are looking for