We upadate to 10.5.6 and now we cant pull up our mail it show up at the top of the page but no screen?? can anyone help?, we upadate to 10.5.6 and now we cant pull up our mail it show up at the top of the page but no screen?? can anyone help?
We updated to 10.5.6 and now when we click on the mail icon the browser comes to the top but no mail screen appears can anyone help???
Thanks
Be clearer and accurate what OS you are referring to.
Similar Messages
-
Installed new hard drive in a Toshiba satellite and now cant do windows upadates
installed new hard drive in a Toshiba satellite S500-02J . Used recovery stick purchased from Toshiba. Windows installed and everything up and running, but when I go to do a windows update. I received this message: "Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer."
Toshiba help line said it was a problem because new hard drive was not exactly the same as the old hard drive. It was a minor fix but wanted a $100 to perform the fix remotely.
Any ideas on how to fix this problem?
Thanks.satellite S500-02J
Maybe this one from the land down under?
Satellite A500/02J (PSAR9A-02J001)
The probloem occurs because the new drive has advanced-format technology. All the new ones do. See this message from three years ago.
The fix is to install a new storage driver.
Intel Rapid Storage Technology
If you've messed around with drivers, you'll probably need to repeat the restore. Introduce the storage driver as early as possible.
-Jerry -
Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Bit more detail...
Mac Book Air has been struggling for space for a while so I bough at time capsule a) for back up and b) to host my itunes folder remotely. This didnt' work. I took it into the Genius bar and the genius there told me that time capsule is not designed for anything other than back up. Instead I have to connect a G drive through the time capsule's wireless router to my MBA.
I followed his instructions - moved my files from the Time Capsule and MBA directly onto the G Drive - which took a heartening 2 hrs so something must have been happening - and the held down 'Alt' when starting iTunes and selected the new itunes folder as the location of my itunes libarary which I wanted iTunes to 'point at'. When I opened iTunes only 10 albums are visible now.
In ITunes advanced preferences it says it is pointing at the correct folder. The files are all cleary there when I open the G Drive folder to take a look. But I cannot get iTunes to find them.
Any suggestions?
Secondary challenge - in spite of deleting the original itunes folder on my MBA I still get messages pop up telling me my start up disk is out of space and I need to clear some - I expected to stop getting this message now I had done this exercise above. I have emptied Trash. Again - any pointers appreciated. I am new to this world of 'intuitive' macbooks.
CheersAfter admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive. -
Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank youThen why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
How do I rename voice memos that were on iPhone 4 and are now on iPhone 5s
Hi - I've got a hold load of voice memos that were on my iPhone 4 which I did not label at the time. Now I'm trying to do some housework on my 5s and would like to label said memos but I can't. Any ideas please? Many thanks.
You can email it to yourself by opening the conversation, tap Edit, tap the voice memo, tap Forward, choose your email address from your contact. You can open this on your computer and the attachment should play in Quicktime.
-
Daughter upgraded to ios 7 and now she has like 4 songs that are not age appropriate on her iphone- I went into itunes and they dont show up...they are like hidden or something- and I cannot delete them from the phone...does anyone know why the upgrade did this and how I can get these songs off her phone- one of them is not even on my phone so I dont understand how in the world it popped onto hers! thanks!
Hello DavoDavo81,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Match on iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5637
Deleting songs downloaded to your device
You can delete a song or album from your iPhone, iPad, or iPod touch at any time. Don't worry; it'll still be in the cloud.
Tap the Music app.
Tap More > Songs at the bottom.
Scroll or search for the song you would like to delete from your device.
Swipe right to left on the song, and then tap Delete.
Note: You must be in Artists, Songs, or Albums view to delete songs from your device. Deleting from a playlist won't remove a song from your iOS device.
iTunes Store: How to delete songs from iCloud
http://support.apple.com/kb/ht4915
Best of luck,
Mario -
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?
Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.
-
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Ok, I used to be able to open links up in a new Tab using my middle mouse button. However, I updated firefox with the automatic Updates on the 26th of October and now I no longer can open links with my middle mouse button. Why? I use this feature just about every time I go searching on the internet so I really would like it back. I couldn't find anything that it was related to in the options so I turn this over to you guys.
Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt -
I am a new user and when the phone asked for the upgrade.. I have had a lot of problems. First it eliminated all of my contacts. Also, I use to be able to close open apps to reduce battery usage by holding my finger on the apps until they "wiggled" allowing me to shut the active app off. I cannot do this any more and now my battery time is lasting about 5 hours tops. This is without me using any apps other than answering calls. Can someone please help.
having apps in the multi-task doesn't eat up battery http://speirs.org/blog/2012/1/2/misconceptions-about-ios-multitasking.html
tips for battery http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Maybe you are looking for
-
Access to the local network of my company.
Dear Mac users, I was wanted to access to the local network and drives of my office, on Windows it was easy for me, plug the cable, press run on start menu then tape the name of the drive (ex: \\dc4). But now on my brand new Mac I can't find how to d
-
I'm trying to add html code that locks the body to a fixed position on the background. When I add the html as an object it just shows up as text on the site. I've used this code successfully with other wysiwyg site builders. Is the add html object in
-
How to preserve section when moving pages?
I need to sort pages in a document. All the pages start a section. When I move a page at the beginning the former page 1 does not start a section anymore. This is exactly like in the GUI. (And I consider this a bug.) In the GUI though the new page 2
-
[(somewhat) SOLVED] Dnsmasq simply won't work - crashed?
Hi there, I'm having a problem with dnsmasq (v2.54 [<- how is this possible anyway? I just reinstalled it, pacman calls it "2.53-1", 'dnsmasq --version' calls it '2.54'…]). I'm just trying to use it as a DNS cache, nothing special. It seems to be sta
-
Problem of fillup with colored rectangles
The following is my canvas <mx:Canvas id="b1" x="10" y="10" height="40" width="300" borderStyle="solid" borderColor="black"/> To fill this canvas with rectangles i wrote the following code for(var i:int=b1.x;i<b1.x+b1.width;i=i+15)